ATTN: TH-cam IS SHUTTING DOWN ALL GUN CHANNELS! I have moved over to Rumble. Others are leaving TH-cam in droves as well. All my NEW content is being posted on Rumble and all my old content is being sync'd by Rumble and stored on their servers for preservation. My channel is easy to find, just search for "NFA Review" in the search bar and you can find me and subscribe! TH-cam has given me 2 strikes so far on videos that weren't out during their new policy change. In addition they are deleting 5-6 videos of mine a week! They are doing the same to other Gun Channels and even the manufacturers that have channels. It's time we take our viewership over to Rumble! No more scrolling and watching non gun related content while we are logged in, no more fresh content, no more support. They don't want us here and Rumble has extended open arms to us and other free thinkers who aren't afraid to call BS on how far society has fallen! See ya on Rumble!
15:57 I counted 5 frames from shot to impact. Your video is 24fps so 5/24 = .2083 seconds. 100 yards = 300 feet so 300/.2083 = 1440 feet per second, which matches almost perfectly with the advertised speed of a Remington UMC 125gr .357 (1450ft/sec). Not sure why I felt compelled to do that but it was a fun little test.
Just finished mine. Soggy bottom custom cerakote in my garage, and ranger point precision handguard and other various parts... it was the toughest build I've done; but it came out great. Working on a suppressor next. Perfect host. BTW: .357 in this thing feels similar to 9mm PCC, very little; but more than .38 special for sure. Im in Zhills as well. Great build.
Haha saw this review and immediately started searching for the Henry. I was disappointed at how hard they are to find! But luckily I went to a local Sportsman Warehouse yesterday and the guy walked out with the 357 and put it right on the shelf and I bought it right then and there!
No fucking way. I have ordered 3 45/70's it will be bad or good if they all come in at the same time, I will be on gun broker. Just waiting until then.
Great video Adam. Glad you discovered suppressed lever guns. Hopefully Henry and Marlin will up their production now that your video will make everyone want one. My Marlin 1894 CST with a TiRant 45 and cowboy action load .38spl is hands down my family's favorite firearm to shoot. Definitely a great gateway gun to get people interested in and comfortable with shooting firearms.
Basically just built one of these in 22 this week... cool part is that on a tube-fed mag is that you can shoot 22short also. Ran into issues bc the 22 doesnt have a loading gate, and the brass tube needs to clear the can. Easy fix though. Found that the 60gr aguila run almost dead silent and SMACK. Supressed lever actions running subsonic are awesome and tons of fun.
I have one and it's stupid fun to shoot! The thread pitch thing is not a big deal for me because I easily found a Griffin 3 lug for it like yours. Worlds better than my Marlin threaded lever gun (purchased during the Remington decline and had to send it back + painted stock is peeling off). My only complaint is these were previewed with Midwest Industry forends and guess they went with the polymer to keep costs down. Would have preferred to spend more and buy it with either wood (Henry makes beautiful wood furniture) or the MI forend. .357 MAG is no slouch out of long gun, but read it's better to use long gun optimized hunting rounds as the pistol ones are designed for handguns and may expand too quickly on impact shot through a rifle. .357 MAG is not uncomfortable to shoot suppressed without hearing protection (no meter, but sounds a tad louder than hot 9mm which is also not ear popping suppressed). From experience, having a leather twine wrap on the lever makes extended shooting sessions more comfortable. If you do put a wrap or tie around it, make sure to oil the leather or paracord because moisture will get under there.
I tried to find one in 38/357 thinking it would be quieter and cheaper to shoot. Couldn't find it so I ended up with one in .44spl/mag. Still a ton of fun to shoot!
Too funny. My rear sight loosened up and came out of the dovetail on my .44 mag version of this rifle only I didn't have the Allen Wrench to take care of it. Made the rest of the day at the range fun.
A couple of months ago I had a chance to buy one for a good price and almost immediately regretted not buying it. Thankfully, yesterday, a few became available in a big box sporting goods store and I was able to order one for a really good price. They are insanely overpriced on GB and several other places. It's amazing to see what these are selling for........... if you can find one. Can't wait to pick it up. Great job on the video.
@@jakelind500 Great price. I got mine for a few dollars more out the door with a discount at SW. Glad to have it, finally. I went with .357. Congratulations on your great find and best of luck.
I have the Henry Frontier suppressor ready 22 rifle and love shooting it suppressed. Definitely will be getting a Henry 357/38 after watching your video.👍
Dustin Ellerman (Top Shot Dustin) did a review of a Salvo 12 where he shot a full mag tube on the back of his horse. I would be fully in support of suppressed, mounted shooting!
I have the X model in .45 colt because I wanted a rifle chambered the same as my SAA , don’t see a lot on the .45 colt especially suppressed, probably because the ammo is very hard to find and expensive, the gun show only comes twice a year in my area so best believe I’m there , it’s the only place I can find my specialty ammo , .45 colt , 7mm.08 , I even found rat shot in .45 colt , how rare is that ?
I absolutely cannot wait to get one Kinda hope this review doesn’t make them even harder to find than they are Great perfect hunting gun and I think my rex 458 can would be great for it Can we get the new ruger 45/70 lever gun review too? Comes factory threaded
Amazing Video, but I was really hoping that you would have shot a few 357 Magnum rounds through the suppressor to show the sound difference between the two.
5/8 x 24 is way stronger. It really is too bad the common 9mm standard thread is 1/2 x28. That only leaves about 0.050 barrel thickness & if you drop a rifle with the can on... well... you just might need a new barrel.
Are you kidding me? Quiet? That hammer strike is loud as fuck! Seriously, the first shot with the .38 special suppressed, I though you had a malfunction and it didn't fire.
i Got me one of those with a Gem tech GM-9 Can and IT IS STUPID QUIET you can Snap your fingers and it's louder then the gun Hollywood Wishes it was this quiet.
How easy is it to aim suppressed with a standard 1.375" OD can blocking the front sight? Only skinny option I found is the Dead Air Odessa 9 at 1.1", but they claim it's made just for pistols. If I can use a 1.375" can, that widens my choices bigtime.
Need to put a red dot or scope on your rifle. I have the 357, 44, and 3030 I run suppressed. I cast my own bullets and load them subsonic. Need to learn how to reload.
@@tycobb162 I looked and called around every spot in over a 75 mile radius of me and nobody had it. Saw it on MidwayUSA and had to have it. No regrets though.
$950 at my local small (southern Wisconsin) shop...Sept 2024. Surprised it wasn't more this close to the election. They had a Citadel for $550, but I just HAD to have a Henry (built in Rice Lake, WI)!
ATTN: TH-cam IS SHUTTING DOWN ALL GUN CHANNELS! I have moved over to Rumble. Others are leaving TH-cam in droves as well. All my NEW content is being posted on Rumble and all my old content is being sync'd by Rumble and stored on their servers for preservation. My channel is easy to find, just search for "NFA Review" in the search bar and you can find me and subscribe! TH-cam has given me 2 strikes so far on videos that weren't out during their new policy change. In addition they are deleting 5-6 videos of mine a week! They are doing the same to other Gun Channels and even the manufacturers that have channels. It's time we take our viewership over to Rumble! No more scrolling and watching non gun related content while we are logged in, no more fresh content, no more support. They don't want us here and Rumble has extended open arms to us and other free thinkers who aren't afraid to call BS on how far society has fallen! I've run this channel professionally for 12+ years, logged 60+ Million views, 10+ years of public shooting events, and hopefully provided insight and detailed information to our community helping everyone make informed decisions on hard to purchase items. I TRULY and whole-heartedly appreciate all of you. It's surreal that all my blood, sweat, and tears are about to be "digitally book burned" by TH-cam but Rumble has cast a lifeline to free speech and the rights of everyone to learn about firearms and suppressor ownership! To my awesome Patreon Members and my subscribers here, thank you! We are beginning a new chapter, ushering in a new fight and WILL NOT GO QUIETLY INTO THAT GOOD NIGHT. See ya on Rumble! - Adam
Mine literally jammed shut and won’t open breach. Extractor also kept over ejecting and catching on receiver. First range trip and have to send it back. Will not open at all.
Sounds like your ammo was out of spec and caused it. I’ve had issues with out of spec case lengths on my Ruger American 300BLK to the point I needed a mallet to open the bolt.
Very sorry to hear that things didn't go well during your first trip out with the rifle! Our customer service department is second-to-none and will make sure you're back in action as fast as possible.
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
ATTN: TH-cam IS SHUTTING DOWN ALL GUN CHANNELS! I have moved over to Rumble. Others are leaving TH-cam in droves as well. All my NEW content is being posted on Rumble and all my old content is being sync'd by Rumble and stored on their servers for preservation. My channel is easy to find, just search for "NFA Review" in the search bar and you can find me and subscribe! TH-cam has given me 2 strikes so far on videos that weren't out during their new policy change. In addition they are deleting 5-6 videos of mine a week! They are doing the same to other Gun Channels and even the manufacturers that have channels. It's time we take our viewership over to Rumble! No more scrolling and watching non gun related content while we are logged in, no more fresh content, no more support. They don't want us here and Rumble has extended open arms to us and other free thinkers who aren't afraid to call BS on how far society has fallen! See ya on Rumble!
Following on Rumble now
This comment didn’t age well . Lol
OMG IT'S SO WEIRD THAT ALL THE GUN CHANNELS ARE STILL ON TH-cam
15:57 I counted 5 frames from shot to impact. Your video is 24fps so 5/24 = .2083 seconds. 100 yards = 300 feet so 300/.2083 = 1440 feet per second, which matches almost perfectly with the advertised speed of a Remington UMC 125gr .357 (1450ft/sec). Not sure why I felt compelled to do that but it was a fun little test.
Just finished mine. Soggy bottom custom cerakote in my garage, and ranger point precision handguard and other various parts... it was the toughest build I've done; but it came out great. Working on a suppressor next. Perfect host. BTW: .357 in this thing feels similar to 9mm PCC, very little; but more than .38 special for sure. Im in Zhills as well. Great build.
Haha saw this review and immediately started searching for the Henry. I was disappointed at how hard they are to find! But luckily I went to a local Sportsman Warehouse yesterday and the guy walked out with the 357 and put it right on the shelf and I bought it right then and there!
No fucking way. I have ordered 3 45/70's it will be bad or good if they all come in at the same time, I will be on gun broker. Just waiting until then.
Great video Adam. Glad you discovered suppressed lever guns. Hopefully Henry and Marlin will up their production now that your video will make everyone want one.
My Marlin 1894 CST with a TiRant 45 and cowboy action load .38spl is hands down my family's favorite firearm to shoot. Definitely a great gateway gun to get people interested in and comfortable with shooting firearms.
I deer hunt with the "gen-1" of that gun. .357MAG 158gr Speer GD Deep Curl handloads, loaded to rifle pressures. Absolutely devastating out to 150Y.
Basically just built one of these in 22 this week... cool part is that on a tube-fed mag is that you can shoot 22short also. Ran into issues bc the 22 doesnt have a loading gate, and the brass tube needs to clear the can. Easy fix though.
Found that the 60gr aguila run almost dead silent and SMACK.
Supressed lever actions running subsonic are awesome and tons of fun.
I have one and it's stupid fun to shoot! The thread pitch thing is not a big deal for me because I easily found a Griffin 3 lug for it like yours. Worlds better than my Marlin threaded lever gun (purchased during the Remington decline and had to send it back + painted stock is peeling off). My only complaint is these were previewed with Midwest Industry forends and guess they went with the polymer to keep costs down. Would have preferred to spend more and buy it with either wood (Henry makes beautiful wood furniture) or the MI forend. .357 MAG is no slouch out of long gun, but read it's better to use long gun optimized hunting rounds as the pistol ones are designed for handguns and may expand too quickly on impact shot through a rifle. .357 MAG is not uncomfortable to shoot suppressed without hearing protection (no meter, but sounds a tad louder than hot 9mm which is also not ear popping suppressed). From experience, having a leather twine wrap on the lever makes extended shooting sessions more comfortable. If you do put a wrap or tie around it, make sure to oil the leather or paracord because moisture will get under there.
I tried to find one in 38/357 thinking it would be quieter and cheaper to shoot. Couldn't find it so I ended up with one in .44spl/mag. Still a ton of fun to shoot!
Too funny. My rear sight loosened up and came out of the dovetail on my .44 mag version of this rifle only I didn't have the Allen Wrench to take care of it. Made the rest of the day at the range fun.
I need more lever in my life as well! Waiting on my Rex cans to get approved then I’ll be getting one of these. Thanks for the review.
Ordered a Rex 358 for my sub, this might be a reason to get a lever action too.
I love my Henry x 38/357!!!
Stupid quiet and crazy accurate.
A couple of months ago I had a chance to buy one for a good price and almost immediately regretted not buying it. Thankfully, yesterday, a few became available in a big box sporting goods store and I was able to order one for a really good price. They are insanely overpriced on GB and several other places. It's amazing to see what these are selling for........... if you can find one. Can't wait to pick it up. Great job on the video.
@@jakelind500
Great price. I got mine for a few dollars more out the door with a discount at SW. Glad to have it, finally. I went with .357. Congratulations on your great find and best of luck.
I got one in 44 for a little over $1000 out the door from Turner's over a year ago. Gunbroker is insane.
@@331Grabber
That's a decent price, especially out the door. I got mine in .357 and really love it.
Congratulations my friend.
The feeding issues are common with strait wall rounds. Especially with smaller pistol calibers. Slowing down a little is usually all you need to do.
I have the Henry Frontier suppressor ready 22 rifle and love shooting it suppressed. Definitely will be getting a Henry 357/38 after watching your video.👍
Dustin Ellerman (Top Shot Dustin) did a review of a Salvo 12 where he shot a full mag tube on the back of his horse. I would be fully in support of suppressed, mounted shooting!
I would like to see what a suppressed 30/30 lever gun would sound like. Since a lot of hunters use the 30/30 and there are a lot of them out there.
Got lucky and I just picked one up today. I’m going to throw on my obsidian 45 suppressor and head out to the desert on my horse.
Love mine! I wish I could get wood to replace the plastic on it though
Doesn't regular big boy furniture fit? Did you call Henry? Give em a call if you haven't, or search around forums if you haven't.
I have the X model in .45 colt because I wanted a rifle chambered the same as my SAA , don’t see a lot on the .45 colt especially suppressed, probably because the ammo is very hard to find and expensive, the gun show only comes twice a year in my area so best believe I’m there , it’s the only place I can find my specialty ammo , .45 colt , 7mm.08 , I even found rat shot in .45 colt , how rare is that ?
After looking for one of these for two years I finally broke down and started bidding on GB and finally won one. Ridiculous what they are going for.
would love an in depth video, just on mounting options, pros and cons
Great video. Can you review the CMMG t3 can please. I ordered one for my MK47..
I absolutely cannot wait to get one
Kinda hope this review doesn’t make them even harder to find than they are
Great perfect hunting gun and I think my rex 458 can would be great for it
Can we get the new ruger 45/70 lever gun review too? Comes factory threaded
Amazing Video, but I was really hoping that you would have shot a few 357 Magnum rounds through the suppressor to show the sound difference between the two.
Yeah it wasn’t until I was on the drive home when I was like 🤦🏻♂️ shoulda shot 357 suppressed 🤣
.357 is supersonic, suppressed it's still loud.
5/8 x 24 is way stronger. It really is too bad the common 9mm standard thread is 1/2 x28. That only leaves about 0.050 barrel thickness & if you drop a rifle with the can on... well... you just might need a new barrel.
Are you kidding me? Quiet?
That hammer strike is loud as fuck!
Seriously, the first shot with the .38 special suppressed, I though you had a malfunction and it didn't fire.
Griffin makes the best mounts in the industry. I’m excited to see how the new dual lok takes off
As cool as this is, I wish it just had a wood stock
Just a regular Big Boy
“My front sight just fell off…” starts working on rear sight.
i Got me one of those with a Gem tech GM-9 Can and IT IS STUPID QUIET you can Snap your fingers and it's louder then the gun Hollywood Wishes it was this quiet.
HOW DOES IT SOUND WITH 357 SUPPRESSED? SHOW ME, PLEASE.
Not trying to hijack the video but here is a comparison of .357 and 38 suppressed.
th-cam.com/video/m4e4ky-ZcdI/w-d-xo.htmlsi=zcv1f9Z72LIOFuZq
Wonder how this would work on the same rifle in 45 Colt?
Nice review!
Holy shit, are you saying I had a Big Boy X 357 with a Rex Silentium .358 before you? I'm a poor, how could this be.....Hahahahaha
How easy is it to aim suppressed with a standard 1.375" OD can blocking the front sight? Only skinny option I found is the Dead Air Odessa 9 at 1.1", but they claim it's made just for pistols. If I can use a 1.375" can, that widens my choices bigtime.
I have one with a rugged obsidian 9, and the factory sights are plenty high for that pistol can. Don't even see it, really.
Don’t forget a piece of straw/hay in your mouth. Lots of customizing options available, including red dot for easy view over suppressors.
Let's Go Henry!
Need to put a red dot or scope on your rifle. I have the 357, 44, and 3030 I run suppressed. I cast my own bullets and load them subsonic. Need to learn how to reload.
Just paid $1,474.75 for one of these, still in the midst of an unconstitutional 10-day waiting period before I can actually pick it up.
Dang bro.
Jesus I just picked mine up at my local shop for $1,000.
@@tycobb162 I looked and called around every spot in over a 75 mile radius of me and nobody had it. Saw it on MidwayUSA and had to have it. No regrets though.
$950 at my local small (southern Wisconsin) shop...Sept 2024. Surprised it wasn't more this close to the election.
They had a Citadel for $550, but I just HAD to have a Henry (built in Rice Lake, WI)!
1+K, you'd think the trigger would be perfect!!!
Henry please make a side loading Mare leg 22 with a threaded barrel
I’ve never seen a side loading .22lr.
We can hope.
No company is going to make a loading gate rimfire, thats a risk the lawyers would never allow. Look for a Ruger 96-22 and get it threaded
.38spl with Osprey45k sounds just like you punched a pillow. 😂
ATTN: TH-cam IS SHUTTING DOWN ALL GUN CHANNELS! I have moved over to Rumble. Others are leaving TH-cam in droves as well. All my NEW content is being posted on Rumble and all my old content is being sync'd by Rumble and stored on their servers for preservation. My channel is easy to find, just search for "NFA Review" in the search bar and you can find me and subscribe!
TH-cam has given me 2 strikes so far on videos that weren't out during their new policy change. In addition they are deleting 5-6 videos of mine a week! They are doing the same to other Gun Channels and even the manufacturers that have channels. It's time we take our viewership over to Rumble! No more scrolling and watching non gun related content while we are logged in, no more fresh content, no more support. They don't want us here and Rumble has extended open arms to us and other free thinkers who aren't afraid to call BS on how far society has fallen!
I've run this channel professionally for 12+ years, logged 60+ Million views, 10+ years of public shooting events, and hopefully provided insight and detailed information to our community helping everyone make informed decisions on hard to purchase items. I TRULY and whole-heartedly appreciate all of you. It's surreal that all my blood, sweat, and tears are about to be "digitally book burned" by TH-cam but Rumble has cast a lifeline to free speech and the rights of everyone to learn about firearms and suppressor ownership!
To my awesome Patreon Members and my subscribers here, thank you! We are beginning a new chapter, ushering in a new fight and WILL NOT GO QUIETLY INTO THAT GOOD NIGHT.
See ya on Rumble! - Adam
So can you run the rugged obsidian 9 on this?
Yes
Man, I want a lever gun so bad.
Definitely want that gun and have been wanting that mg7k can for a while now.
Mine literally jammed shut and won’t open breach. Extractor also kept over ejecting and catching on receiver. First range trip and have to send it back. Will not open at all.
Sounds like your ammo was out of spec and caused it. I’ve had issues with out of spec case lengths on my Ruger American 300BLK to the point I needed a mallet to open the bolt.
Very sorry to hear that things didn't go well during your first trip out with the rifle! Our customer service department is second-to-none and will make sure you're back in action as fast as possible.
Will my octane 9 handle .38 spls?
It'll handle both the .38 and the .357. No problem...
Quit coming off the gun to cycle the action.
Cry more
@@yackum_3331 huh? Because I critiqued tecnique? Sure. I guess.
Cool
Have one, love it! Be advised I did have a case head separation with 38sp alum case. Was a pain to fix. But other then that, super solid.
Please explain "case separation" so I know it should I have the same. Thanks!