Wiring 2 Hikvision Face Recognition Terminals into a Single Door using Maglock
ฝัง
- เผยแพร่เมื่อ 8 พ.ย. 2023
- In this video, Oliver shows you how to wire 2 Hikvision Face Recognition Terminals into a single door using a Maglock.
In addition, you will see how to wire these in a secure method with the relay being triggered from the "secure side" as well as utilising a 'No Touch' Exit Button and Emergency Door Release, all going back to Haydon PSU's with battery backup.
Products used/seen in this video:
Hikvision Face Recognition Terminal - w.cop-eu.com/access/access-co...
Hikvision Secure Module (If using a single Face Terminal) - w.cop-eu.com/access/access-co...
Hikvision 'No Touch' Exit Button - w.cop-eu.com/access/access-co...
STP Resettable Double Pole Emergency Door Release - w.cop-eu.com/access/access-co...
STP Slim Monitored Maglock With Door Status Monitoring - w.cop-eu.com/access/access-co...
Haydon 12V 3A PSU - w.cop-eu.com/products/install...
Yuasa 12V, 7.0Ah Battery - w.cop-eu.com/products/install...
Wiska Gel Filled Box with Wago - w.cop-eu.com/products/install...
@HikvisionUKIreland
@HikvisionCorporateChannel
@WISKAChannel
#hikvision #accesscontrol #howto #facerecognition #maglock #stp #haydon #wiska #wago #yuasa
Hikvision Face Terminal Quick Start Guide can be found at, www.hikvision.com/uk/products... - วิทยาศาสตร์และเทคโนโลยี
What is the Max runtime when there is a power failure for a single door setup?
Followed step by step, and wiring continuity confirmed, but I can't get the slave unit to unlock the door via the master. Any ideas?