LA Choppers Harley Dyna Rear Lowering Kit Installation - GetLowered.com
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2018
- Pickup an LA Choppers 1" Rear Lowering Kit for your bike for an easy and economical way to lower the backend of your Harley - www.getlowered.com/la-chopper...
- ยานยนต์และพาหนะ
![[Live] : ONE FIGHT NIGHT 23 วันนี้!! “เร ยุน vs อาลิเบก”](http://i.ytimg.com/vi/ClLQVYWSrUk/mqdefault.jpg)
The kit here in Europe is much the same, only with different bolts, and you dont need the nut. But very happy with the result.
Thanks for the video, my kit did not come with any instructions at all. Your video was a God send. Thanks.
so far the best explanatory clip I've found on the web
I have been thinkng of this for my older FXDL....I find it kind of top heavy....of course, I rode over 40 years on mostly rigid frames until a few years back... Back in the 80's I lowered a 75 Sportster for ny girlfriend back then....moved the shock mount back as per an Easy Rider tech tip....and made up new fender mounts (handy to have a bud with a chrome shop) and had to weld and shape washers on the rear fender to lift it enough to not get hit by the back tire on bumps. That very top heavy Sportster felt a lot more like an FX after the lowering.
great vid sir, appreciate you taking the time to share this. subbed and liked
When I do these on customers bikes, I use black grade 5, BUTTON HEAD CAP SCREWS, from my Ace Hardware. These look AWESOME and the grade 5 meet factory requirements for strength. They use a hex or Allen wrench for tightening. Also, if you watch closely one side of the lowering blocks will lift slightly off of the swingarm as you ride. Often it will raise up slightly just by tightening the bolts, its PHYSICS it doesn't have much choice. The cure is to replace the offending side bolt for the block with a longer one, AND most IMPORTANTLY get a NARROW NYLOCK NUT that will fit nicely on the inside. I do this on both sides for symmetry, although only one side will lift. A drop of blue LOCTITE, and torque to specs. No lifting, symmetrical, and structurally sound.
RIDE SAFE RIDE FREE 🇺🇸🏍🇺🇸🏍🇺🇸🏍🇺🇸🏍🇺🇸
I don't understand what you mean by only one side will lift? Why is that?
Solid to the point video!
thanks bro got my bike lowerd last bolt on the other side i had to use orignal bolt to get the bottom on the right side but my feet are flat
Do they make bolt covers to blend that bolt a little better. Maybe a sticky polymer ? Not sure.
Your wife is spot on with the rear shocks. Love the anodized black
It looks way better than looking at coil springs!👍
Great vid.. What's the torque specs for too and bottom? I have an 09 fatbob
After that you must adjust belt tension. It changes When you low or rise de bike
Great video, Ace Hardware sells grade 8 black chrome bolts.
Did it bottom out and dent the shock? Looked like it on video
Wondering with it being lowered even further if youre going to hit the wires that are ran on the inside of the fender?
(or if that was something that happened to me because I put a slightly wider tire on) ?? :)
Ur wide tire
I just installed the burly 10.5 in rear shocks on my 2016 dyna street bob.. if I add 1in lowering blocks will the tire scrape on fender when going over bumps or other things on the road? Thanks
Did you did it? Add a the 1in lowering block with your burly 10.5? I want to do the same thing. 👍
@@vichetsophap I would like to know also it says on the footnotes for the blocks that they are not to be installed with the shorter shots but I want to try it as well
Hi, ... not for arguing, but Why I would pay almost the same as brand new pair of rear shocks? I'm looking for 1 inch less in my Dyna FXDWG and certainly would buy this if the price were lower
technical query....after installing the lowers...the clearance between the left shock absorber and the belt guard...seems to rub...and I see that the brake caliper can touch the lower strut. .. If someone can help me... before damaging any part... I would appreciate it
I have a 2013 Fat Bob and I bought this 1" lowering kit and the face that is suppose to in line with the old face don't line up the kit sits back about 1/4" , I'm not happy , is their a different kit for the 2013 ? and do you Burn your left leg on the Primmer , my Evo isn't this much trouble
I have an older Evo....last year I stopped to see if I could help a guy from one of the vet clubs on the side of teh road fiddling with his bike....his was a 2022 bagger....and it's electrical system was dead....unlike the older bikes. he had to call AAA and get towed to a dealer.....I love my dinosaur Evo.
Can I do it without lifting tire off ground?
Yea just do 1 shock at a time and you shoul be fine.
andrew porter easily finished the project in about 10 minutes
does not fit any switchback with hard bags
Why you talking like that dude? Stop