4 Different Styles of Fitment
ฝัง
- เผยแพร่เมื่อ 22 ต.ค. 2018
- Have you ever wondered what fitment is? Today we sit down and look at 4 different types of fitment to help you understand and decide which style suits you.
Check out our online fitment gallery here!
www.fitmentindustries.com/add
Need a new set of wheels? Check out our site!
www.fitmentindustries.com/
Check out more videos like this!
/ fitmentindustries
Filmed & Edited
@fitmentindustries
Additional Content
@Christian Ngo
@BoostedBoiz
@Semuc K. - ยานยนต์และพาหนะ
What type of fitment do you have? Add it to our gallery for an IG shoutout
09 Audi a5, what is required to get close to a flushed but poked look? I like the slight negative offset but want to know what would be a great recommendation
Um what type of fitment do you have without fenders ?
Flush on my awd TL, lowered on adjustable coils with 18x8.5 OZ racing ultraleggera +35 offset wheels wrapped in pilot sport 4s's
Stock fitment, because I'm poor.
I have fitment called gap
I have "stock" fitment
best fitment
hahahaha
I have monster truck figment 2011 mustang gt stock rims tires and suspension
themechanic1887 red yeah ok
The No "Emergency break every crater" stance. I'm raising my car, stock is love, stock is life.
Rocking that hella stock fitment
gimguy711 respect the drip
🥵
SHEESH SAME 🥵
#hellastock
Same bruh, same.
9:39 The rarest sight to ever be seen. If you get it you get it.
BMW driver using his indicators 🤣
Unicorn sighting confirmed
impossibile. bmw blinkers arent issued on regular cars.
Lmao
Only in old cars, RIP
7:48 when you walk into the wrong classroom 😂😂
Im dead
😂😂😂
lmaoooooo =)))))))))))))))
I don’t get it
Hoodie Drifts the background
0:44 Tuck Fitment
3:11 Flush Fitment
5:22 Poke Fitment
7:40 Stance Fitment
Flush all day
Amen!
🙌🏼
Function>Flush
Yea I'm probably gonna do flush when I get a car
I wish TH-cam allowed us to post pictures with our comments. 🏎🏎
I like stance with little camber , but I'm in love with the flush meaty track look , definitely going for that with my rsx.
JDMJalon same here man! Meaty flush setup for my RSX next summer
@@dc5eric00 same , hopefully by summer for me too. What's your ig?
JDMJalon @erics.dc5, just made a car page 😅
A barely poking fitment/almost flush but pokes a bit is just the best kind of fitment.
Looks very aggressive and track ish like.
I could not stop looking at the background, 1 rim/wheel is missing
Lul sure was!! One time only
Didnt notice and now its annoying me
Thanks for that
It hurts man. My OCD
Fender to lip or Tuck for me!
Daddy divine 😍
Or how about both? fender to lip in front and good ol tuck in the rear
Fender to lip for me 🔥
Yo yo sc looks killer homie
I will never get why people do that, i know...i know it looks good but just because of that?! How can people enjoy scraping everywhere and get beached at the smallet speed bump or driveway and it's horrible to drive.
Flush looks hella clean and never hated on because it's just that good.
Idk why but the slanted wheels in a stanced fitment really bugs me. I don’t even really like slammed cars cause it seems super impractical and frustrating. But yet I’m still very intrigued by it 😂
I love it
Ik what you mean. Ik it will destroy wheels, but its crazy that it actually works for a little bit.
my favourite is definitely flush.
SAME
A good poke with a nice drop is the ultimate flush
Hella late but I’ve got a question! I wanna have this fitment on my 91’ teggy, you think it’ll work?
@@RetroactiveEscapades email fitment industries... they are great!
Zane Zinn funny story, im still waiting for a reply haha
Chris Ontiveros use spacers and low offset wheels
Douby Jocelyn gotcha
I have a "Mistake Fitment" If you Happy and you Know it Clap your Hands...
😁☝️
i let my fenders roll themselves >:)
Ouch
i feel like my fender just takes chunks out of my tires and doesnt get rolled at all lmao
@@epiles2 lmao the paint at the very edge of my fender is burnt to a crisp
My fender split in half
My fenders are pinched in where on the front of my lowered car but have a bigger and better fitting rims and tyres now about half a fingertip size between the the front fender and the tyre/rim on full lock
Just found your channel, and wanted to say thank you for making an objective video on this topic! Very interesting listening to someone in the actual industry talk about different styles of fitment, as there are A LOT of different opinions out there from "regular" car guys. Feels like there are a million different styles, you summed them up perfectly.
Subtle half inch poke on a muscle car looks absolutely amazing. It gives a beefy, muscle, badass look. I purposefully got spacers to give my Camaro just that little amount and have had numerous people notice without me pointing it out and say it gives the car wide and strong look. But it has to be subtle. Too much and you start getting into weird 'shouldn't this have a body lift and being going offroad?' pickup truck/jeep look.
Driveability goes out the window with stance fitment. Flush or slight poke all day long.
Watched this video because of the GTI thumbnail
and was let down like i was im sure
@ben_cajero on insta
@@infamousdime completely
Same
GTI gang
I'm SO glad you made this video before I put my coilovers on.
Shaun Jay are coilovers hard to install? I have some skunk2”s and scared to do it myself I don’t want to fuck it up 😭😭
Kurt Wylde lol no coilovers are stupid easy to install, same with bags, coilovers can be done in under an hour easily with the right tools. I fully installed my bags in 5 hours by myself
Glad we could be here to help with that process and make it a little less daunting!
Interesting regarding your opinion on tucked fitment. I'm on coilovers, with my stock wheels. I dropped the car about 2.75" all around. On the same front, I did 15mm spacers in front and 20mm spacers in rear. I did this because, if I didn't, with my drop, I'd be hitting tires. I didn't need to roll fenders, and it fits well. The wheel itself stays under the fender line but the tire is partially hidden by the body work. I like the look of it anyways lol, it's practically flush, just a few millimeters off, and I never rub. So it looks good AND functions.
Ordered up a wheel/tire set up from you guys. Backorder but I can wait. Thanks again service is awesome.
4:37 my sister has an accord just like that but it's stock. That accord looks so good!!
Flushhh. Looks and function. I’m hoping to upgrade to air so I can tuck when I air out but have a flush fitment when I air up. #goals
I am after the Flush look thanks so much big respect!
I have Poke on my Miata, with the camber provided by the coilovers, no more no less, and I love how it looks.
I cringe when i see a stanced car, the only thing i can think of is how fast the inside of the tires are gonna wear out
And how much the owner has fucked up both the handling and performance of their car, no matter what it is.
@@rosstee It’s not about the performance at some points some people would just like to make their car like that. Respect everyone’s build.
@@taheersingh8309 Whatever appearance you like is fine, except when it can be dangerous. Wheels rolling on one small edge will wear out much sooner and could go while driving, potentially causing an accident for yourself which could involve others.
@@rosstee I get it bro but for some people it’s a passion and in my opinion it’s pretty cool but not with like extreme camber, that’s just not safe. It talking about like the car in the thumbnail.
@@taheersingh8309 Yeah being low is cool of course, I'm mainly talking about the extreme camber cars where they're rolling on a tiny patch of rubber.
Love your channel. Learning and/or confirming things for me. Thank you for your vids. I appreciate and seek an aerodynamic fitment / flush fitment most. I would guess there can be a flush and stance fitment combined so to speak to fully achieve this depending on the shape of the car's body - fenders, side skirts, quarter panels.
I'm currently running Silver Enkei RPF1 Wheels 18x8 +45 offset on my 2002 Subaru WRX Wagon, it's looks very nice but the thing too keep in mind is I have to run a thinner profile tire(225 r18) so in the end the ride is more harsh vs using a 17x8 wheel with more sidewall. Also using "Feal 442 coilovers" which allowed me to drop the height maybe 2 inches from stock, looks nice but is not slammed.
wedgoku nice! I have the same wheels but it’s 18x9.5 +38 on 265/35/18
The fact you guys sell fitments but also creat eentertaining content is so great.
2020 Mazda6, and got 20" aftermarket rims. The previous owner did a "Stretch" with little tires, I hit 1 pothole on the way home and dented the rim, and was like WTF?? Anyway I used fitment industries to choose my new "Flush" tire size, and make sure they would fit with no issues. I'm glad these guys are out here with this kind of info because the guy at the local tire shop had no clue what I was talking about!!!
I had a flush fitment with my corvette wheels on my legacy, can’t lie I loved it
Ngl this channel is gonna get huge, love the content too
This info is spot on, great job on bringing this information as clear as possible. I have had all 4 😂... only 3 now...
I'm all about the flush look. It just looks mean, but it doesn't look like you're trying too hard. To each their own though.
MuShinnen to do it right you either have to buy a set of higher offset temp wheels and a ton of spacers and play with them to plan for you second wheel build, or copy specs off of someone who has.
@@operamatthew Facts!! 👏🏾
You could check out our gallery and see what other peoples specs are! bit.ly/2Ma4oca
@@FitmentIndustries I've been on it a few times before. Saw you can fit 20x10.5 all around on an 09 m35 there so that'll be my next setup
@@operamatthew I just bought a set of wheels and tires made for a stock or slightly lowered 03 Mustang. They fit perfectly. Then I had to buy a bumpsteer kit and camber/caster adjustment kit to correct all the problems magnified by the wide front tires caused by the performance springs the previous dingus put on it. But that wasn't the fault of the rims and tires.
Running a flush Fitment but have done tucked and stance before. Flush is just nice for dailying and it still looks good
Sounds dope man you should upload your ride to our gallery sometime! bit.ly/2obqAZQ
as a challenger owner i like "poke" fitment or agreesive stance. i wish there was a video that showcased how to go about getting negative or low offset that pokes out the fender but can launch HARD off the line too.
all about that tuck life... cos it was easy. Think it suits my S4 but ive seen s4's running fitment and it looks dope. love all of them as long as its done right
Stance fitment... is where it’s at for me... but I still have great ride quality and function... just a lot of work and trial by error , but when done right it absolutely worth it.
I kinda thought that flush fitment only works on McPherson and double wishbone setups as the motion of the suspension travel arc.
With some suspension like torsion beam, flush will always scrape the fenders.
Just a thought though. Unsure if its true or not
Flush with a slight poke looks great
Static and tucked is just the best
I went for poke fitment when i bought my wheels and got exactly what i wanted. If know what type of fitment for sure do your research because that helped me get the fitment i wanted
Im gonna try and lower my car for the first time. It's a lexus is300. Besides the coilovers, is their anything else i should consider upgrading? Like control arms, end links, tie rods, bushings, and sway bar? Not trying to roll or have to pull fenders so not going too low. Just want a smooth ride.
I have stock fitment but I want stance fitment on my BMW. Love the videos. Keep'em coming.
Dope shot of the freight graff in there!
my friend's rsx has wheels that poke, but since the wheels are deep dish and pretty small, they look really good on it
Lexapp so does mine !
Hella late but I’ve got a question! I wanna have this fitment on my 91’ teggy, you think it’ll work well on my teggy if it does on your friends RSX?
ayyy here before 100 views, this channel is a whole mood
sammee, but also they got some good info
I have a 05 es330 and I jus went from stock 17’s to Mas Italy 7spoke 18’s and it definitely gave me the poke fitment look rubs a lil bit in the back when I hit a dip but nothing too crazy. Definitely gonna roll my fenders in the next week or so
Tucked with alot of negative camber is my favorite type of stance :)
Lol my 370z currently has monster truck fitment
At least you have fenders
Same on my 350z 😂
Cars hook down when launching. Take into consideration. I've seen rear bumpers, wheels/tires been destroyed at launch.
Poke is becomming common on driftcars due to widened track on the front to clear increased steering angle. i had almost an inch of poke on my m3 due to wisefab making my trackwith 16cm wider than stock
I had no knowledge about fitment, now I do, and you have a new subscriber, thank you!
HEYYY! Glad we could help and we appreciate the sub!!
i think you mean:
1. wrong
2. correct
3. less wrong
4. never
Haha true
This needs pinning
How about it's their car, not yours.
@@TrVlogs82 Atta boy
ba ha ha ha sooo true
Hahaha, Seeing the poke fitment on the new GT350 (15-18) Is what got me interested in it to begin with. I was never into muscle cars growing up (I was one of those JDM kids) but falling in love with the New mustangs and them being more then 'MUSCLE CARR, FK YEAHHH!!" Iv been actually more interested in doing poke fitment intentionally. hehee xD
extensive vocabulary on point 👌
flush just looks so clean
Lol I’m static with tucked fitment because it looks nice not because I messed up. 🤷🏻♂️
OfficialxElias same here. I’m tucking hard on my e90
same here , was just about to comment, cause WE STATIC
I think it goes:
Aggressive Fitment
Track Fitment
Slammed Fitment
Clean Fitment.
Hey! Does reducing the ET (but still maintain all the wheel clearances) can affect tyre wear? Of course, after changing the weels I will proceed with a geometry verification. Congrats for the content, you are the best!
When you were talking about the poke figment it reminded me of when I was in high school and all the Honda guys were sticking wide tires on the back wheels... ya you read that right
love poke fitment. It has a muscular stance and make the car broader than normal
Personally i love love the poke looks so much!! I also love the flush fitment, and tucked looks cool aswell i just wouldn’t run that setup on my car.
Very helpful. Thank you
Flush looks the best to me thats the look im going for. Excited for my wheels to ship from fitment Industries!
I got that stock mustang super tucked fitment 👌.......😢
Style 1 & 2 are in general the better and cleanest looking ones! 👍
Matter of opinion 🤷♂️
@@HeshyBoii Well, yes and no.
That's why I said "in general".
ur videos make me happy
I bought some wheels 2 weeks ago, and did a test fit and got a little poke on my Accord, got a poke fit.
- Guess im going to do a stance fitment in the spring next year. xD
Poke fitment on purpose here ...
That aggressive bulldog stance is awesome in my eyes
Right. Poke is aggressive in my eyes. Its wierd that he says most poke is from picking the wrong offset.
Rodolfo Garza like is my favorite it’s so aggressive and everything
Okay I’m late as fuck but you’re the only person I’ve seen who wants poke! So my question is this; I have a 1991 Acura Integra LS I wanna do some poke fitment to, you think it’ll work?
@@RetroactiveEscapades bro do what ever makes u happy
Edit: I love poke fitment looks mean asf
@@_Lowlly I agree with you 110% but as someone with no experience, I'd have to spend all.this money and my first project be a flop... That's a lot of money
Btw im flush with the oem 17s and spacers. For now. 😀
I like how you own up to your receding hair line.
Ultimate fitment for me and what I do with my cars is what I call “lip poke”. I’m not a fan of monoblock wheels so my wheel choice is always a 2 or 3 piece wheel with a lip. Looking down the length of my cars from behind, you see the wheel lips just barely poking pasts the fender. If it’s my Audi B8 s5, when aired out the fender lip sits exactly between the tire (mild stretch) and the wheel lip. It’s all just a matter of preference. That’s the beauty of modifying/customizing cars...everyone has their own style
Always flush, always. There's NEVER a time, even in aesthetics in mind, that stance looks good. Last setup I had was [in my pic] 16x7, +42 wrapped in 205/40's. Next setup will be 15x6.5, +38. Rubber is in the air, might run offset sizing; F205/50 & R195/50.
Completely a matter of opinion, I love the look of stance
I spy boosted boyz!!!
I have poke on my lowerd bmw X1. I bought lowering springs looks good but im saving up for BC racing coilovers, hopefully have em by august. Then 2023 ill upgrad to some 19". im on a tight budget but ill get it looking right.👍🏿
Thinking of doing tucked with the my GT sport
I love stance, I like a lot of camber etc if all done right can still work great
Flush fit 😎 all day errday
i love the editing on this :)
Hella poked on my 79 foxbody semi flush on my mach 1
I have shitment 😂
Older cars with poke fitment look mint af.
I don’t have fitment but I’ll love to try it out
Fender to lip!!! 😍😍😍
7:47 guy in back: "did someone say 'hella flush'?"
😂
half inch of poke MK6 GTI
Looking for wheels now. Definitely going the flush route. Really want NT03 but they aren't made in 112x5.
Poke looks so good on “boxy” cars such as the 2000 Audi s4
Stance is the most work because you have to keep attaching all of the pieces that fall off the car
Hey man I drive a FWD MK4 Jetta an my poke wasnt a mistake. The only reason my fronts donts poke is cuz of rubbing issues, otherwise they'd be poking too. It gives your car that brolic, mad pumped up look. I think only NYC people will get what I mean lol
5:25 I love this freaking look.
Right now I have a 2021 Camry xse with 19x9.5 Ferrara fr2 wheels and has a slight poke with stock suspension. I think it looks good will only look better once dropped though
Running poke but when you drive a lifted Tacoma it's pretty acceptable
1/2 to 1 in. poke with a lil stretch on a frs super aggressive
I have a caddy with 17x6.5 215/50/17 I plan on putting air suspension and tucking the wheels up the fender wells. It used to have 16x7 225/65/16
I have poked fitment, by nearly an inch, I have a 00' Honda Civic EJ9 with an KW V3 and Brock B6 9x16 ET30 on 215/40 16 Toyo Proxxes.. it looks pretty good