So ive watched both your videos and have bent my sear and its literally not solving my sear engagement problem. Im getting 20% engagement with an OEM and the polymer 80 components. Im completely at a loss here
I’ve also bent my sear, But check the back where the firing pin connects and the sear engagement is also around 20% is their any other thing that could help it ? or do i keep bending my sear,,
Hey brother thank you I'm definitely going to try this 1st on mine I think this is the main problem I have If the problems continue after that I'll go for the 20 pound Spring
This 100% worked for dry firing works everytime, every-now n again still will happen during live fire is this due to break In period only have roughly 120 rounds through it, but it will never do it dry
My trigger doesn’t set at all. When I rack the slide it doesn’t desert the trigger what’s so ever. Someone please help me: I’ve already messed with the connector and it’s not that.
I have an brand new p80 and when I rack the slide back the trigger doesn’t go foreward every time sometimes it does but a lot it don’t will this fix it
hello, with this I can solve the problem of the two shots when you only do one in reality
Yes
@@JARG Thank you very much, could you give me your Instagram to follow you
Watch the #1 cause of fail to reset. Same issue
@@JARG I didn't understand
Watch this th-cam.com/video/qGZn34vpYmg/w-d-xo.html
So ive watched both your videos and have bent my sear and its literally not solving my sear engagement problem. Im getting 20% engagement with an OEM and the polymer 80 components. Im completely at a loss here
What exactly is happening?
I’ve also bent my sear, But check the back where the firing pin connects and the sear engagement is also around 20% is their any other thing that could help it ? or do i keep bending my sear,,
Hey brother thank you I'm definitely going to try this 1st on mine I think this is the main problem I have If the problems continue after that I'll go for the 20 pound Spring
20 will fix slide creep
This 100% worked for dry firing works everytime, every-now n again still will happen during live fire is this due to break In period only have roughly 120 rounds through it, but it will never do it dry
No angle not high enough. Rounds are pressing slide up a hair
Thank you for that!!! I will play around with it this weekend and see if this might help. Will let you know.
My trigger doesn’t set at all. When I rack the slide it doesn’t desert the trigger what’s so ever. Someone please help me: I’ve already messed with the connector and it’s not that.
It’s your crossbar angle. I have about 3 videos on the #1 reset issue for P80
is there anything you can use besides a vice? that wont break it
Well using a wrench or something would pull to much torque on it and break. Recommend the vice. It does not need to change but a few degrees
I have an brand new p80 and when I rack the slide back the trigger doesn’t go foreward every time sometimes it does but a lot it don’t will this fix it
Yes watch the other full video on P80
th-cam.com/video/rT-xlciuQds/w-d-xo.html
Could a bad slide cause issues with resetting?
Not likely at all
Worked great for me...had same intermittent non reset...thank you..i subscribed to you...good tips..
Thank you! In my case I had to bend mine down, I couldn’t pull the trigger at all
So it works now?