How Glock triggers work and how they reset

แชร์
ฝัง
  • เผยแพร่เมื่อ 31 ม.ค. 2025

ความคิดเห็น • 1.6K

  • @nadda8681
    @nadda8681 3 ปีที่แล้ว +318

    Brother, I know this is an old video, but as a former certified chief weapons armorer for a L/E agency, this is STILL one of the best vids I've seen on this topic. Great job, my man.

    • @MosinVirus
      @MosinVirus  3 ปีที่แล้ว +18

      Thank you very much

    • @920WASHBURN
      @920WASHBURN ปีที่แล้ว +7

      It's the ONLY one I've seen on this topic.

    • @dustonboyte2299
      @dustonboyte2299 ปีที่แล้ว

      Ir5t5 tr tr r t tr⅚rtt😮😮þ😮tr😮😮😮t😮t😮😮is 😮truly 5t😮t t r5 tr t tr ft tr t 5 t t t t ft t ft ft 5 tr t tr ft truly rrr😮is t😮😮þ😮😮😮d5😮

    • @JustinBobby-di9zt
      @JustinBobby-di9zt ปีที่แล้ว +5

      Also shows how a switch works. The pin from the switch depresses the part that raises the trigger bar and the connector keeping firing pin and bolt carrier group from catching allowing full auto fire via preventing the trigger from resetting at all and causing a closed bolt semi automatic pistol to act almost like an old open bolt machine pistol bolt carrier just dumping mags off of pure recoil.

    • @southerntrendkiller2632
      @southerntrendkiller2632 10 หลายเดือนก่อน +2

      @@JustinBobby-di9ztGlock bolt carrier group you say…

  • @southpaw1969
    @southpaw1969 ปีที่แล้ว +40

    8 year old video but this is, by far, the best explanation I've seen on this. Thank you for making this.

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว +2

      My pleasure. I am glad it is still relevant.

    • @Heikin-Ashi-Larry
      @Heikin-Ashi-Larry หลายเดือนก่อน

      Search “how a Glock works” and look for the video by Matt Rittman. You’re welcome.

  • @greyscout01
    @greyscout01 6 ปีที่แล้ว +44

    4 years later and your video is still being appreciated. Thanks.

    • @MosinVirus
      @MosinVirus  6 ปีที่แล้ว +2

      It is my pleasure. Glad the video is useful.

    • @geoffc376
      @geoffc376 ปีที่แล้ว +3

      9 years later!

    • @Cooperdbhd
      @Cooperdbhd ปีที่แล้ว +2

      ​@@geoffc376, same here years later !

    • @2226robin
      @2226robin 11 หลายเดือนก่อน +1

      Another 9 years later, you video still a big help.

    • @MosinVirus
      @MosinVirus  11 หลายเดือนก่อน +2

      @2226robin Thank you. I am glad it is still useful.

  • @chipsterb4946
    @chipsterb4946 2 ปีที่แล้ว +30

    This is the best explanation of how the parts interact that I’ve been able to find. It is important to understand how the bottom ledge of the firing pin catches on the back edge of the trigger bar cruciform. Likewise with the trigger bar/connector relationship as you pull the trigger and, especially, during reset.
    It’s been 6 months since I last took one apart and re-watching this video is exactly what I need for a quick refresher!

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว +4

      Thank you very much. I am glad the video continues to be useful.

    • @Hjerte_Verke
      @Hjerte_Verke ปีที่แล้ว +4

      Even the super-duper computer animated "How it works" channels gloss over many things, or fail to show certain steps in their quests to be so clever. It really is a shame that they put more effort into how polished the animation is compared to the accuracy of the information. It really is hit and miss

    • @chipsterb4946
      @chipsterb4946 7 หลายเดือนก่อน +1

      @@MosinVirusa couple of light firing pin strikes the other day lead me back here again for a refresher. A Glock is nothing like a Smith & Wesson revolver - there I can take the side plate off and recall how everything works in 60 seconds.

    • @MosinVirus
      @MosinVirus  7 หลายเดือนก่อน +1

      @@chipsterb4946 yes, a revolver system just makes sense.

  • @marshallvanwagneriii1495
    @marshallvanwagneriii1495 5 ปีที่แล้ว +9

    It's now 2019, and this is still the best video on the Glock trigger mech out there. Very good job. Thank you.

    • @MosinVirus
      @MosinVirus  5 ปีที่แล้ว +1

      I am glad you liked it. Thank you very much for checking it out.

  • @dannon4
    @dannon4 8 ปีที่แล้ว +38

    I am not a gun owner, but I enjoy learning about firearms (and I am an engineer). Kudos to you for your desire and need to know about your equipment. You have a superb understanding of mechanics and more importantly a vocabulary and skill in accurate communication that made this video a pleasure to watch and understand (more than once). Thanks.

    • @MosinVirus
      @MosinVirus  8 ปีที่แล้ว +2

      Tom D Thank you very much. Glad you liked it.

    • @VideosBanales
      @VideosBanales ปีที่แล้ว +2

      Hurry up and grab your p80 online so you can test one out yourself! Those frames are being sold out already..

    • @Cooperdbhd
      @Cooperdbhd ปีที่แล้ว +1

      Yes I agree fantastic command of vocabulary and exemplary communication skills. Superb presentation.

    • @bespeedok
      @bespeedok 3 หลายเดือนก่อน

      You should definitely own guns

  • @Cooperdbhd
    @Cooperdbhd ปีที่แล้ว +5

    Best tutorial I've seen on the topic of specifically how these components interact. And I've searched through dozens and dozens, many of who profess to be experts on the subject.
    You run circles around them, thanks for your contribution.

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว

      It is my pleasure. Thank you very much for such a kind compliment.

  • @billydunn5485
    @billydunn5485 ปีที่แล้ว +8

    This video showed me exactly what I needed to know in order to diagnose my issue. I am so glad I got lucky enough to run across it. Thanks a bunch!

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว

      It is my pleasure. I am glad I could help. Let me know if you have any questions.

  • @samlott99
    @samlott99 6 ปีที่แล้ว +26

    These are the kinds of videos that make a difference. Excellent explanation.

  • @daveflowers3070
    @daveflowers3070 ปีที่แล้ว +12

    This is the best, most detailed, visual aide on the internet... well done sir.

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว

      Thank you very much.

    • @Heikin-Ashi-Larry
      @Heikin-Ashi-Larry หลายเดือนก่อน

      Search “how a Glock works” on here and look for a video by Matt Rittman. It is 3d animated and is the best of the best

  • @rickpalluck5398
    @rickpalluck5398 6 ปีที่แล้ว +3

    I just watched the video on the operation of the Glock trigger,and once again got a great lesson.Thank you.Every time I watch one of your videos I get a education. I kind of work the same way as far as knowing how it works before I try to fix it. I am a firm believer that you can’t fix something if you don’t know how it works in the first place. It only makes sense,otherwise you’re guessing! Thanks again,and keep them coming...

    • @MosinVirus
      @MosinVirus  6 ปีที่แล้ว

      Thank you. Glad the video helps. I have just been very busy with work lately which is why I have not been posting. Have two projects I want to work on and film but dont have any time.

  • @BrotherCurt
    @BrotherCurt 10 ปีที่แล้ว +83

    This is an excellent explanation of the firing mechanism and order. Very well done! Great clarity with the camera as well. The tip about lightly polishing the end of connector bar was great! I'm book marking this video. Good job. GOOD job!

    • @MosinVirus
      @MosinVirus  10 ปีที่แล้ว +4

      Thank you for watching. Hope it helps.

  • @rickpalluck5398
    @rickpalluck5398 6 ปีที่แล้ว +7

    Every video you do explains everything very clearly.To explain how this trigger works says a lot about how you think.Thats great for us,Thanks once again for a really good lesson.

    • @MosinVirus
      @MosinVirus  6 ปีที่แล้ว

      It is my pleasure. Glad the videos help.

  • @randyreviewsit
    @randyreviewsit 2 ปีที่แล้ว +3

    it's 8 years later and i am still coming back to your videos, thanks for making informative and up close videos

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว

      I am glad I could help.

  • @JayHutchG
    @JayHutchG 9 ปีที่แล้ว +10

    You did just fine Mosin. In fact this is the most informative "who glock triggers work" video I have found. Like you, I want to know exactly how the mechanical parts interact before I do anything to my firearm. No maybe stretching that spring was not the best thing, as they should be replaced in tandem with complimenting weights. But overall you nailed it on the simple, but unusual way a glock trigger works. Thank you so much for taking the time. There is more to polish in the connector trigger bar assembly.

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว

      Thank you. Glad you liked it.

  • @Larsenne
    @Larsenne วันที่ผ่านมา

    Thanks so much for this. I'm starting to do my first internal work and changing out the whole trigger system. This randomly showed up in my feed without searching the day before my stuff shows up in the mail. Thanks so much. I subscribed and you got a new fan.

    • @MosinVirus
      @MosinVirus  วันที่ผ่านมา

      @@Larsenne I am glad I could help. And good luck with your upgrades.

  • @cabbys
    @cabbys 4 หลายเดือนก่อน +3

    10 Years After. Still a great video and refresher. Thank you!

    • @MosinVirus
      @MosinVirus  4 หลายเดือนก่อน

      My pleasure.

  • @ph99331
    @ph99331 ปีที่แล้ว

    8 years later and your video is still helping. i am having issues with double fire and the safety is not resetting smoothly. i have an aftermarket glock store trigger in it. thanks to this video I now think I know the problem. thank you again

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว +1

      My pleasure. Make sure the trigger spring is not kinked to the side on the bottom at the trigger bar. If it is off to the side it can lead to reset issues and I can imagine it could cause some double fires

    • @ph99331
      @ph99331 ปีที่แล้ว

      @@MosinVirus
      Thanks I'll do that

  • @danbishop7177
    @danbishop7177 9 ปีที่แล้ว +180

    explaining how this trigger works isn't the easiest thing to do, good job!

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว +12

      dan bishop thank you. Glad you liked it.

    • @OLD86216
      @OLD86216 6 ปีที่แล้ว +6

      Very good, thank you

    • @denvernicholas1270
      @denvernicholas1270 3 ปีที่แล้ว

      @Raymond Cyrus Thanks for your reply. I found the site through google and Im trying it out now.
      Looks like it's gonna take a while so I will reply here later with my results.

    • @denvernicholas1270
      @denvernicholas1270 3 ปีที่แล้ว

      @Raymond Cyrus It worked and I finally got access to my account again. I am so happy!
      Thank you so much, you saved my account!

    • @raymondcyrus8177
      @raymondcyrus8177 3 ปีที่แล้ว +2

      @Denver Nicholas No problem xD

  • @Big_LosF
    @Big_LosF 2 ปีที่แล้ว

    8yrs later an this video helped understand in detail how it wrks. My friend, I greatly appreciated the time you took to educate me. Thank you.

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว

      It is my pleasure. I am glad the video helps.

    • @Heikin-Ashi-Larry
      @Heikin-Ashi-Larry หลายเดือนก่อน

      Search “how a Glock works” and look for the video by Matt Rittman. You’re welcome.

  • @spot2be
    @spot2be 9 ปีที่แล้ว +3

    I purchased my first firearm a few weeks ago (Glock 19). Your explanation increased my confidence exponentially. Better understanding the tool I have in my hand adds another dimension of control for me as a beginning shooter.

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว

      +Tommy Productions Glad I could help. Enjoy your G19.

  • @noelmesina3858
    @noelmesina3858 6 หลายเดือนก่อน

    I am diyer myself, like you said i like to know how things work if I am going to take it apart. This video is one of the best i have seen… concise, easy to follow and very objective. Great video, a must-see for all glock and glock-like gunowners.

    • @MosinVirus
      @MosinVirus  6 หลายเดือนก่อน

      Thank you very much

  • @haofu1673
    @haofu1673 10 ปีที่แล้ว +46

    Now I finally understand how Glock works. Thank you!!!!!!!

    • @MosinVirus
      @MosinVirus  10 ปีที่แล้ว +2

      Thank you for watching. Glad I could help.

    • @rocxylemmon8535
      @rocxylemmon8535 6 ปีที่แล้ว +1

      MosinVirus dont you feel good now, so many praising you for great advice...😉 good job m8te.

    • @MosinVirus
      @MosinVirus  4 ปีที่แล้ว +1

      Yessss Wayyyyy!

  • @daytonagreg8765
    @daytonagreg8765 6 ปีที่แล้ว +2

    You provided a very unique presentation & well needed mechanical explanation of the internal trigger relationships between the transfer bar, connector, and the tension between the cruciform/“sear” & firing pin lug. While there are many video presentations on TH-cam in and around this topic, you provided a very different direct view of the mechanics that I found to be incredibly enlightening. Kudos!!! Every one of these types of videos helps Glock users gain additional insight into the internal working of their firearm. Just a fantastic job! -Greg

    • @MosinVirus
      @MosinVirus  6 ปีที่แล้ว

      Thank you very much. I am glad you enjoyed the video and hopefully it helped.

  • @trubadyr99
    @trubadyr99 8 ปีที่แล้ว +4

    Thank you for this great guide, man!
    Several well-known youtubers claim that Glock Ghost Evo Elite is the best Glock connector there is.
    The problem is that this particular connector is not very easy, but rather tricky to install. Your videos are of great quality and if you'd one day decide to install that connector for G19, or G17 gen 4 and post your video about that, it would be just marvelous service to all fans of your channel and the fans of a Glock in general. Thumbs up!

    • @MosinVirus
      @MosinVirus  8 ปีที่แล้ว +1

      Sure thing. I will look into it.

  • @pattime2laugh599
    @pattime2laugh599 2 ปีที่แล้ว +1

    This guy is great! His explanation got my trigger reset problem identified and I was then able to fix it. Thank you

  • @thewolffpath4369
    @thewolffpath4369 8 ปีที่แล้ว +9

    People like you are hard to come by! Thank you for sharing. This was very interesting and informative

    • @MosinVirus
      @MosinVirus  8 ปีที่แล้ว +1

      The Wolff Path my pleasure

  • @fwoodbridge
    @fwoodbridge 10 ปีที่แล้ว +2

    I come back sometimes just to watch the explanation. It's simple, yet effective and provides immediately useful information. So much to like here. Thanks.

    • @MosinVirus
      @MosinVirus  10 ปีที่แล้ว

      Thank you very much. Glad you enjoyed it.

  • @alexwozniak2967
    @alexwozniak2967 9 ปีที่แล้ว +48

    Best explanation I've found. Thank you. Its nice to know exactly how the thing that I trust my life with works. I need to go polish the edge of my connector now.

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว

      Thank you for watching.

    • @Shamrockrancher
      @Shamrockrancher 8 ปีที่แล้ว +7

      +Alex Wozniak Just a heads up... MosinV mentions in passing about polishing this or that. There's a vid on here that I thought was dead on where the guy doing the polishing used a marker and marked up the parts. As I recall, he reassembled the weapon, dry fired it several times, then took the weapon back apart. Where ever the marker had worn away were the spots to polish. I remembered this from high school shop class but as I recall we used some kind of bluing that you would 'etch' into. The markers are a good idea and a lot less messy plus when you're done, you can re-task them as markers again. The shop class bluing will be forever in your garage until it completely dries out in 15 years. What a waste. Good luck! And Mosin, thanks for the vid!

    • @Satchmoeddie
      @Satchmoeddie 7 ปีที่แล้ว +3

      That blue stuff is called Dye-Chem. A lacquer based Sharpie works just as well.

    • @rockstargamer7936
      @rockstargamer7936 4 ปีที่แล้ว

      It's a glock bro plus your probably never gonna use in a real scenario anyway lol

    • @rockstargamer7936
      @rockstargamer7936 4 ปีที่แล้ว

      With humans

  • @FactsDominate
    @FactsDominate 6 ปีที่แล้ว

    4 years later and your video helped someone (me) to better understand my weapon. Thanks I needed that. Excellent Video.

    • @MosinVirus
      @MosinVirus  6 ปีที่แล้ว +1

      Glad it helped.

  • @denvergriffin5555
    @denvergriffin5555 7 ปีที่แล้ว +9

    Another wonderfully understandable and thoughtful video. Really appreciate this and especially your full dis- and reassembly explanations as well. You have a gift for clear explanation.

  • @bfgivmfith
    @bfgivmfith 2 ปีที่แล้ว +1

    I built my first Glock 19 thanks to you and how thorough you are! Thank you! You were just the kind of person I needed to find to understand how Glocks work. I have built several guns, my friends bring me their guns that are not functioning, and I figure them all out. I never liked Glocks because of how Blocky they are, but got a deal on a kit, and could not pass it up. Your videos were the best at teaching me how Glocks disassemble and re assemble! Thank you! My 19 is functioning flawlessly!

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว

      I am glad the videos help.

    • @Heikin-Ashi-Larry
      @Heikin-Ashi-Larry หลายเดือนก่อน

      Search “how a Glock works” and look for the video by Matt Rittman. You’re welcome.

  • @tonygamboa4879
    @tonygamboa4879 4 ปีที่แล้ว +10

    Fantastic breakdown of each part's function. I was looking for problems why my slide was so hard to pull back during the first .25 inch. I realized the ghost 3.5 connector was so much thicker than my OEM connector, the slide protrusion was having difficulty pushing the thicker connector inward!! Thanks!

    • @frmusamedia
      @frmusamedia 2 ปีที่แล้ว

      I noticed the same thing with the 3.5 ghost edge. How did you gun feed? And was the slide effected at the range?

    • @nk-dw2hm
      @nk-dw2hm 2 ปีที่แล้ว

      You might need to check the angle of your connector, it's normal to have to adjust how far out they bend from the housing. If it sticks out too far it can cause that drag feeling. Also check your safety plunger to make sure it's moving smooth

  • @redbear52
    @redbear52 7 ปีที่แล้ว +1

    I have watched a number of your videos now and I must say I think you are a mechanical genius. Thanks for sharing your knowledge and insight.

    • @MosinVirus
      @MosinVirus  7 ปีที่แล้ว +1

      redbear52 thank you very much. Glad you like them. I am thinking about making one today/tonight. it will include a test fire of my latest 1911 build.

  • @timhill2849
    @timhill2849 9 ปีที่แล้ว +12

    Excellent description of the trigger. it did help me understand also. Great job and good camera work on the Video...very helpfull....

  • @ea8cxv
    @ea8cxv 5 ปีที่แล้ว

    There are many videos that explain how one part or another of the trigger works but none explains the full operation and its possible failures as this video does, in addition, in very good image quality. Thank you very much MosinVirus

    • @MosinVirus
      @MosinVirus  5 ปีที่แล้ว

      Thank you very much. It was my absolute pleasure.

  • @eddyg.7761
    @eddyg.7761 8 ปีที่แล้ว +52

    this is a quality TH-cam video , very well done !!

    • @MosinVirus
      @MosinVirus  8 ปีที่แล้ว +1

      EDDY G. thank you.

  • @qazialimohayuddin6526
    @qazialimohayuddin6526 2 ปีที่แล้ว

    The only person who has taught me more about my Glock 19.....loved it ...and it solved the issue of trigger reset I have with my gen 3

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว

      Thank you. I am glad I was able to help.

  • @steveo6685
    @steveo6685 2 ปีที่แล้ว +10

    Absolutely unbelievable educational video man and I SERIOUSLY appreciate you for making this💪🏽🙏🏽❤️❤️

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว

      Thank you very much. Good to know the video is helpful.

  • @cheese.n.crackers
    @cheese.n.crackers ปีที่แล้ว

    This is my first time seeing this video. It’s excellent. Every Glock shooter should watch this several times. It’s always good to understand how your firearm operates. Great job!

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว

      Thank you. I am glad the video continues to be valuable.

    • @Heikin-Ashi-Larry
      @Heikin-Ashi-Larry หลายเดือนก่อน

      Search “how a Glock works” and look for the video by Matt Rittman. You’re welcome.

  • @jg5941
    @jg5941 8 ปีที่แล้ว +7

    I always knew my G17 would go bang, but now I know why. Great info, thanks!

    • @MosinVirus
      @MosinVirus  8 ปีที่แล้ว

      Thank you for watching.

  • @Armory52
    @Armory52 2 ปีที่แล้ว +1

    Great Job. No one else explains this that i know of. I now understand how it all works, not just a “ parts changer”. Thank you sir

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว

      My pleasure. I am glad the video helped.

  • @JGraham63
    @JGraham63 10 ปีที่แล้ว +8

    great video. I own 5 glocks and am always messing with my triggers. you nailed it

  • @zeeelia2223
    @zeeelia2223 6 ปีที่แล้ว

    You're a sharp dude. I made an account just to tell you I was having a problem with my ghost connector not resetting the trigger and, while I was reluctant to watch a 12 min vid, I used what I learned from you to figure out my problem. Thanks!

    • @MosinVirus
      @MosinVirus  6 ปีที่แล้ว

      My pleasure. I know the video could have been shorter. Sorry about that. So, what was the issue with your connector?

    • @zeeelia2223
      @zeeelia2223 6 ปีที่แล้ว

      MosinVirus I got the ghost rocket connector that you can adjust the over travel distance with by trimming the extra tab it comes with. So while trimming it and putting it back into the gun to see if it works (idk how much you know about it) I was afraid to over trim it and defeat the purpose of it so when I got the trigger to drop, I was happy. Then I noticed the trigger wasn’t resetting if I held it down while the slide cycled. After watching your vid I realized I needed to trim it a little more in order for the trigger bar to slide past the connector and actually sit on the side of it so the cruciform could fully come up and catch the striker. I was trimming it to the point that the cruciform was touching the tab on the connector. Only took 4 hours to realize 🙃

    • @MosinVirus
      @MosinVirus  6 ปีที่แล้ว

      Ahhh, yes, I have seen those. I am sure after you do a couple you will know how much needs to be trimmed off that trigger bar stop arm.

  • @geoffreyjoel
    @geoffreyjoel 9 ปีที่แล้ว

    im a 1911 user for years and just bought g35 your video helps me alot to understand things on glocks. thank you

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว

      thanks for watching. I am a huge 1911 fan too. have you seen my 1911 videos?

    • @geoffreyjoel
      @geoffreyjoel 9 ปีที่แล้ว

      +MosinVirus yes sir and the 2011 as well... im in the direction of open division on my glock already ordered the package (carver) your video helps me a lot coz part of the package is set of carver trigger kit... im really dumb on glocks lol

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว

      +Geoffrey Joel good luck. Glocks are super easy. and so easy to maintain.

  • @proudbirther1998
    @proudbirther1998 10 ปีที่แล้ว +7

    You did an excellent tutorial. THANKS for taking the time to make it and share your knowledge.

  • @Ollegram
    @Ollegram 8 หลายเดือนก่อน

    This whole time I thought it was just black magic…thank you for doing this in depth explanation. For me, understanding this is huge when cleaning a Glock. Also helps with diagnosing any issues I could potentially run into.

    • @MosinVirus
      @MosinVirus  8 หลายเดือนก่อน +1

      I am glad the video helps. Thank you.

  • @MosinVirus
    @MosinVirus  10 ปีที่แล้ว +77

    Regarding spring combinations... If you watched this video, you heard and saw me talk about springs and how they affect each other. Well, I found a combination that works perfectly when it comes to reducing the weight and not sacrificing the trigger safety. You can replace only the striker spring for a 4 lb. one! Do not replace the Trigger Spring that pulls the Trigger bar back. Leave the original trigger spring in. This will give you a much lighter trigger weight and engage the trigger safety every time.

    • @JayHutchG
      @JayHutchG 9 ปีที่แล้ว +1

      Have you experienced any light primer strikes with that lighter striker spring Mosin?

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว

      JayHutchG I have on a .45 Glock, but not on 9mm.

    • @geezerp1982
      @geezerp1982 9 ปีที่แล้ว

      +MosinVirus what you want ? a medal?

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว +25

      +geezerp1982 I already got one. thanks.

    • @sipzter
      @sipzter 9 ปีที่แล้ว +19

      +MosinVirus Just watched this. As usual, you present information in a way that the less knowledgeable of us can learn from. I enjoy learning about the inner workings of guns and I especially enjoy watching your gun build videos. Thank you for your time and energy.

  • @Gitaryzt85
    @Gitaryzt85 7 ปีที่แล้ว +1

    Thanks for that. People that make these how to and explanation videos deserve a beer!

    • @MosinVirus
      @MosinVirus  7 ปีที่แล้ว +1

      Gitaryzt85 thank you. I actually just had one today. Or two... who's counting...

  • @Greentangle
    @Greentangle 4 ปีที่แล้ว +6

    Like the way wearing grooves while explanation.

  • @RonJustice33
    @RonJustice33 4 หลายเดือนก่อน

    Wow, this is great !
    I'm years later seeing from when made & it's just hands down the best I've seen thus far.
    Incredible job !
    Thank you
    💪🔥👏🤙

    • @MosinVirus
      @MosinVirus  4 หลายเดือนก่อน

      I am really glad you liked it and found it useful. Thank you.

  • @sooner5484
    @sooner5484 8 ปีที่แล้ว +3

    Thank you, appreciate the time spent on this, cheers.

    • @MosinVirus
      @MosinVirus  8 ปีที่แล้ว

      sooner54 my pleasure.

  • @stevemccormick3968
    @stevemccormick3968 ปีที่แล้ว +1

    Great explanation! I haven't seen any other TH-cam videos that explained this nearly as well as you. Good job. I subscribed and liked

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว

      Thank you. I hope the other videos will not disappoint!

    • @Heikin-Ashi-Larry
      @Heikin-Ashi-Larry หลายเดือนก่อน

      Search “how a Glock works” and look for the video by Matt Rittman. You’re welcome.

  • @redeiger2006
    @redeiger2006 9 ปีที่แล้ว +11

    Thank you for an excellent video. Note to self; as soon as you read, "I am a glock armorer" stop reading.

  • @SvarogUSA
    @SvarogUSA ปีที่แล้ว

    I just love watch your "how to " videos. I learned from you how to change trigger variant on HK USP etc. And now this one . Your video's are very detailed and Very easy to understand . Thank you very much.

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว +1

      It is my absolute pleasure. Thank you for letting me know. I am glad the videos continue to be useful.

  • @greedfox7842
    @greedfox7842 6 ปีที่แล้ว +5

    I had to find the full auto conversion to figure out my trigger... now I'm on a watch list...

    • @MosinVirus
      @MosinVirus  6 ปีที่แล้ว +2

      I hope this video helps without putting you on any lists.

    • @snr2707
      @snr2707 4 ปีที่แล้ว

      MosinVirus so the f/a kits “seer” just keeps the connector from snapping back over and resetting?

    • @MosinVirus
      @MosinVirus  4 ปีที่แล้ว

      Not exactly.

    • @snr2707
      @snr2707 4 ปีที่แล้ว

      MosinVirus Hmm...trying to figure this out...

  • @jfitzikner9
    @jfitzikner9 10 หลายเดือนก่อน

    Just broke mine down and went through all of this… knew what needed to take place for each action but wasn’t sure how… great explanation. Didn’t know about the trigger weight either. Great video

    • @MosinVirus
      @MosinVirus  10 หลายเดือนก่อน

      I am glad I could help.

  • @StevenBrooks2012
    @StevenBrooks2012 10 ปีที่แล้ว +4

    Trigger resets when slide is racked during dry fire but when I hold trigger while racking slide the trigger does not want to go all the forward to hard set the safety trigger button

    • @MosinVirus
      @MosinVirus  10 ปีที่แล้ว +1

      Yes, this happens when your striker spring is too light for the trigger spring. If you replaced your trigger spring for a stronger one (6lb) and you striker spring for a lighter one (4lb) which usually come in kits, the safety may be compromised because the striker spring is not strong enough to move the trigger all the way forward.

    • @StevenBrooks2012
      @StevenBrooks2012 10 ปีที่แล้ว +2

      i have the oem trigger spring in it now: replaced the 6lb as instructed by a friend especially if your using a 4.5 striker. my new combo is 5lb trigger and 4.5 striker spring. all primers fired and not one problem for target practice. home defense, I use a 5-6 lb striker to be on the safe side. I removed too much metal off of my original cruciform and during resetting trigger, it would slip off striker face. I link your videos to my glock owners and they much appreciate your fine videos. thanks, steven

    • @MosinVirus
      @MosinVirus  10 ปีที่แล้ว +1

      Glad to see you got it figured out. Thank you for watching.

  • @randomnav
    @randomnav 7 ปีที่แล้ว

    I have watched quite a few videos on how the Glock trigger works and this is by far the best. Thank you so much for doing it. I feel that now I have a good understanding of how the trigger works. One very minor little point, in the future, try to refrain from saying "okay" and "right" every other sentence. As I said GREAT!!!!!! vid. Keep up the good work. Looking forward to more of your explanations. You have a knack for it.

    • @MosinVirus
      @MosinVirus  7 ปีที่แล้ว

      Bob C thank you. Yes I know I have been saying Ok And Right pretty frequently. I have actually been working on that. please check out my more recent videos and see if I am doing a little better. it is just difficult to speak to the camera.

    • @randomnav
      @randomnav 7 ปีที่แล้ว

      You can do better than me that's for sure.

  • @MosinVirus
    @MosinVirus  10 ปีที่แล้ว +3

    +ProudBirther Thank you.

  • @michaelmaramag9820
    @michaelmaramag9820 หลายเดือนก่อน

    i have been a sport shooter for a few years running a g17 gen2. i didnt really try to disassemble my glock i always have it done by gunsmith or someone who does know. anyway i have that problem since i change the trigger kit with a zev trigger kit cause i wanted to reduce the slack/trigger pull travel the guy who installed it managed to reduce the trigger slack but somehow the safety was not working anymore. by watching your video i remembered he said he cut off a few spring from the trigger (i didnt know what spring was that) but thank you now i know how to fix it. thanks

    • @MosinVirus
      @MosinVirus  หลายเดือนก่อน

      @@michaelmaramag9820 I am glad I could help

  • @josephsmith7148
    @josephsmith7148 7 ปีที่แล้ว

    Lately I decided to try to understand my Glock 21 SF better and this video is a big help. I am so glad that you do not rush the explanation, if you did I would be lost. I am going to check out more of your videos too.

    • @MosinVirus
      @MosinVirus  7 ปีที่แล้ว

      Glad you liked it. Enjoy your G21.

  • @maverick00084
    @maverick00084 ปีที่แล้ว

    Excellent video! I learned a ton! I was replacing with a Timney trigger and wanted to learn more but couldn’t find a good explanation. Best video!

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว

      Glad it was helpful!

  • @calisti555
    @calisti555 10 ปีที่แล้ว

    Not all the diy trigger vids here on TH-cam do not explain all mechanical relationships for the parts they are polishing. While I figured out some I didn't know all of the parts interactions in the functions of the Glock until I watched your video. Thanks.

    • @MosinVirus
      @MosinVirus  10 ปีที่แล้ว

      Calilaker CAGLS thank you for watching and your feedback. Glad you liked it.

  • @TaurenJam
    @TaurenJam 3 ปีที่แล้ว +1

    omg thank you. Saved me a trip to the gunsmith.
    i couldn't get my slide back on the frame so i tried this and it worked like a charm.
    you're a god among gods.

    • @MosinVirus
      @MosinVirus  3 ปีที่แล้ว

      Thank you. I am glad I could help.

  • @freddo7330
    @freddo7330 2 ปีที่แล้ว

    8 years later & your video is still helping/informing the culture! God Bless Patriot🫡

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว +1

      Thank you. I am glad the video is still relevant.

    • @Heikin-Ashi-Larry
      @Heikin-Ashi-Larry หลายเดือนก่อน

      Search “how a Glock works” and look for the video by Matt Rittman. You’re welcome.

  • @LexTheLionLocc
    @LexTheLionLocc 8 ปีที่แล้ว

    i had a 75% understanding of how the trigger group works and now 100%. Im very happy to run into your vid.

    • @MosinVirus
      @MosinVirus  8 ปีที่แล้ว +1

      Glad I could help. Thank you for watching.

  • @linda5797
    @linda5797 8 ปีที่แล้ว

    this is the best up-to-date that is out there yet for how the Glock actually works excellent job

    • @MosinVirus
      @MosinVirus  8 ปีที่แล้ว

      Thank you very much.

  • @pauliedweasel
    @pauliedweasel 2 ปีที่แล้ว

    Great Video! I had a fuzzy idea about how the Glock trigger mechanism worked before this but this video makes it clear as day, Thank You.
    This video should be used by Glock to teach users an armorers about the gun.

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว +1

      Thank you very much for this great feedback. I am really glad the video helps.

    • @pauliedweasel
      @pauliedweasel 2 ปีที่แล้ว

      @@MosinVirus I’ve seen other videos about how the trigger bar and connector interact but yours was the first to the relationship between the cramming surface on the slide and the connector, that relationship had never dawned on me. I’ve sent this video to my older son who’s a LA County Sheriff’s Deputy and a senior range instructor at their Wayside training facility. Glock is an approve sidearm for the sheriffs and my son has a Glock so I think this video will be helpful to him.

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว +1

      @@pauliedweasel thank you. I do hope it helps people understand how the system works.

    • @pauliedweasel
      @pauliedweasel 2 ปีที่แล้ว +1

      @@MosinVirus It’s perfect!

  • @robinsage1964
    @robinsage1964 ปีที่แล้ว

    Thank you for this well thought out explanation, I am a gunsmith of 30 years and this helped me.

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว +1

      I am glad the video was useful. I am by no means a gunsmith, but I try to do some stuff on my own.

    • @robinsage1964
      @robinsage1964 ปีที่แล้ว

      @@MosinVirus Well I used to work at Krebs Custom and built all his production guns which were STI 2011s and some race guns as well and I am more then convinced nobody could ever call themselves a Master Gunsmith because gun design is always changing and we will all learn what these goofy engineers put together for us to stump us. Never quit and you are talented for sure.

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว +1

      ​@@robinsage1964Thank you very much, sir.

  • @relixfour8727
    @relixfour8727 7 หลายเดือนก่อน

    helped me fix my 9c1 while modifying the trigger, you're a legend to this day

    • @MosinVirus
      @MosinVirus  7 หลายเดือนก่อน

      Thank you very much!

  • @nascarFergie
    @nascarFergie 6 ปีที่แล้ว +1

    Once again I find myself needing the brilliant mind of this firearm genius. You helped with the Beretta 92 and now the Glocks. Thanks again for all the advice and tips.

    • @MosinVirus
      @MosinVirus  6 ปีที่แล้ว

      It is my pleasure. I am very glad the videos help.

  • @carloelia3380
    @carloelia3380 2 ปีที่แล้ว

    I want to say thanks to the author of this video for taking the time to explain things for those of us who are newbies to the DIY frame building world. Not only is it for us to know how to build, but also to know how exactly everything works. This way diagnosing and troubleshooting will be something that you can do in a breeze for yourself. As opposed to scouring the web for troubleshooting fixes and throwing a bunch of repairs at something that may not be necessary. Thanks again to the author of this video it was appreciated.

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว

      It is my pleasure. I will be resuming making videos soon. The work on the house is done and I am almost ready to finish a workshop in the garage. Then videos will be getting made and uploaded.

  • @Mntoyaz
    @Mntoyaz ปีที่แล้ว

    I am a new Glock owner. Thank you for the detailed video on how the slide and the lower interact with each other. 👍🏼👍🏼

    • @MosinVirus
      @MosinVirus  ปีที่แล้ว +1

      My pleasure. I am glad the video helped. Congrats on getting your first Glock

  • @krumpchaos
    @krumpchaos 9 หลายเดือนก่อน +1

    I stumbled across this by accident, been trying to figure this shit out for a while, thanks so much for this video, hands down the best on explaining this

    • @MosinVirus
      @MosinVirus  9 หลายเดือนก่อน

      It is my pleasure. I am glad I could help

  • @cjeje8145
    @cjeje8145 11 หลายเดือนก่อน

    C'est assurément la meilleure vidéo sur le Glock. Merci de nous aider à comprendre le fonctionnement de nos armes et des possibilités d'améliorations sans gréver la sécurité. Encore bravo. ( de France )

    • @MosinVirus
      @MosinVirus  11 หลายเดือนก่อน +1

      Merci beaucoup. je suis heureux que la vidéo aide les gens du monde entier.

  • @aglock10glock34
    @aglock10glock34 6 ปีที่แล้ว

    I appreciate that you like to understand how the mechanism works, that is how I got my start. A lot of time went into my design. However, you embarrassed me and yourself with all of the "ok, right, ok, yes, see, ok, right". Mr. MosinVirus you are now in TIME OUT. You are not allowed to handle any of my pistols for six months. Sincerely, Gaston Glock.

    • @MosinVirus
      @MosinVirus  6 ปีที่แล้ว

      Yes, I have actually been working on what I say and don't say in the videos. Some I had to repost because I used to say "Ok" a lot. It is difficult to talk to the camera... I just molested another Glock last night. Sorry, you were too late.

  • @DangerousWillie
    @DangerousWillie 5 ปีที่แล้ว

    I bought a used Glock online & have been having trouble with the trigger resetting on some shots. Thank you for this video. I'm hoping that you helped me fix my problem.

    • @MosinVirus
      @MosinVirus  5 ปีที่แล้ว +1

      If the trigger spring is kicked off to the side (look down into where it is connected to the trigger bar) that would cause issues with reset for sure.

  • @m118lr
    @m118lr 4 ปีที่แล้ว

    THIS is a great, very well produced vid explaining the design behind the striker-fired GLOCK. Straight-forward and comprehensive...

    • @MosinVirus
      @MosinVirus  4 ปีที่แล้ว

      Thank you very much.

  • @checkitout1311
    @checkitout1311 4 ปีที่แล้ว

    I can't thank you enough. Your detailed explanation was one of the best I've ever seen. My compliments.

    • @MosinVirus
      @MosinVirus  4 ปีที่แล้ว

      Thank you very much. I am glad you liked the video.

  • @jessegscott2984
    @jessegscott2984 5 หลายเดือนก่อน

    This is very good. Easy to understand and very thorough. Cannot thank you enough. 5 stars+

  • @Sooch694
    @Sooch694 10 ปีที่แล้ว

    I appreciate your patience and care of detail in this video. I'll watch it and refer to it often. I have a 2nd gen Glock and am beginning my way around the the inside. I've noticed there are videos of people who modify theirs, some quite a bit. Two requests please. 1) a disassembly video and 2) a video that says STOP, DO NOT MESS WITH THAT! Thanks again, MV

    • @MosinVirus
      @MosinVirus  10 ปีที่แล้ว

      Thank you for watching. I actually have a complete disassembly video of the Glock. You should find it on my channel. I do try to at least in the comments bring up things people should not do. Though Glocks are very forgiving. There are only a few things I know for a fact to make it less safe - polishing the end of the trigger bar that contacts the striker lug, trying to jig up DIY pre - and - post travel stops, and light striker springs.

  • @williamsisko503
    @williamsisko503 7 ปีที่แล้ว

    Was having a problem with my trigger resetting on a Glock I built. Excellent explanation. This helped me big time. Thanks.

    • @MosinVirus
      @MosinVirus  7 ปีที่แล้ว

      Glad I could help.

  • @dominickvessia1847
    @dominickvessia1847 10 ปีที่แล้ว

    Excellent, Understanding the function and correlation of parts is critical. I wish more reviewers made the effort. It was informative and will be extremely useful. Thank you

    • @MosinVirus
      @MosinVirus  10 ปีที่แล้ว +1

      Thank you for watching. Glad you enjoyed the video and it is always nice to see comments like yours. Thank you.

    • @joserrodz
      @joserrodz 9 ปีที่แล้ว

      +MosinVirus
      Just purchased a Glock 26 Gen 4 and looking for all Info related to Glock. Found your excellent video and had to praise you on probably the Best Audiovisual Presentation on the Glock Trigger System ! Not only you explain its parts but also show how each interacts with each other and as a whole ! Nice narrative with clear diction. Thank You !

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว

      joserrodz thank you very much for watching and your great comment.

  • @bottomknockinbaja6092
    @bottomknockinbaja6092 2 ปีที่แล้ว

    Fantastic video! I just replaced my trigger connector and noticed that it does pushover when it resets. I thought for sure I did something wrong and I've been searching for info andl found your video and now know that everything is A-OK!. Thanks for your great video it helped a lot.

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว +1

      My pleasure. I am glad the video helped.

  • @tianlamian
    @tianlamian 3 หลายเดือนก่อน

    Thank you so much for making this video your explanation of the firing pin spring and trigger spring helped me diagnose a weak reset issue i was having with a secondhand g19, it sends the previous owner used a lighter firing pin spring so when i swapped the timney trigger out for a stock one, the reset was too weak

    • @MosinVirus
      @MosinVirus  3 หลายเดือนก่อน

      @@tianlamian i am glad I could help and great job solving that issue.

  • @dbeeksci
    @dbeeksci 4 ปีที่แล้ว

    You are correct, understanding the working mechanism is important before you proceed with altering the anything. That was a very helpful video. Thank you.

  • @randallhouse2772
    @randallhouse2772 9 หลายเดือนก่อน

    As a gunsmith….. you did a good job on this video !!

    • @MosinVirus
      @MosinVirus  9 หลายเดือนก่อน

      Thank you very much.

  • @mvalens8162
    @mvalens8162 7 ปีที่แล้ว

    Nice job. I've had a Glock for 20+ years and had no idea how the mechanism worked. It goes bang and I was happy with that.

    • @MosinVirus
      @MosinVirus  7 ปีที่แล้ว

      True. There is no need to really get into it. I just like to see how they work even if I don't plan on doing anything to the mechanism

  • @gregm1343
    @gregm1343 5 ปีที่แล้ว

    Best explanation I've found yet I actually understand the function and possible alterations and problems etc I feel I have a good grasp now where 20 minutes ago I didnt have a clue what made it work or how to make changes to it

    • @MosinVirus
      @MosinVirus  5 ปีที่แล้ว

      Thank you very much

  • @barbarashea7358
    @barbarashea7358 9 ปีที่แล้ว

    Excellent breakdown. Did have to watch a couple times to get understanding but that's on me. Helped me understand my non-reset issue after polishing some parts. Thanks.

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว

      Glad you liked it.

  • @richardcabral9863
    @richardcabral9863 4 ปีที่แล้ว

    Your Explanation is better than the animated one by Glock. Thank You Outstanding especially for guy that owns nothing but 1911, Now I own Glocks. Richard

    • @MosinVirus
      @MosinVirus  4 ปีที่แล้ว

      My pleasure. I actually have a few Glocks too.

  • @GordonGridley
    @GordonGridley 7 ปีที่แล้ว +1

    This is exactly the video I needed to figure out what I did wrong installing my pyramid trigger, and helped me understand what it does compared to the factory trigger system. Very well explained and demonstrated. Thank you!!

  • @ChoochContrino
    @ChoochContrino 7 ปีที่แล้ว +1

    You make the most informative gun related videos. Well done, again.

    • @MosinVirus
      @MosinVirus  7 ปีที่แล้ว

      Thank you. Glad they are useful.

  • @mechovan
    @mechovan 10 ปีที่แล้ว

    Very good explanation. I always polish the connector surface you referred to as a matter of practice, but never actually thought about how the Glock trigger reset works. I just knew that the trigger felt better when I included the edge of the connector in the polishing.

    • @MosinVirus
      @MosinVirus  10 ปีที่แล้ว

      Thank you for watching. Glad to help.

  • @luciankristov6436
    @luciankristov6436 4 ปีที่แล้ว

    This helped me fix my Glock. thank you man. My connector reset arm wasn't cramming back far enough

    • @MosinVirus
      @MosinVirus  4 ปีที่แล้ว

      I am glad the video helped. Thank you

  • @NATES84
    @NATES84 9 ปีที่แล้ว

    Best explanation I have seen of what happens .What a fascinating chain of events have to occur ",elegant" thinking like an implosion bomb construction .More Glock video info please .Will have to check for the trigger reset you highlighted .

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว

      Thank you for watching. Glocks are truly the most amazing pistols due to their simplicity of design and yet high reliability and accuracy.

  • @alexbeer4705
    @alexbeer4705 2 ปีที่แล้ว +2

    Good job dude!! Only “certain” people wouldn’t be unable to understand your detailed explanation. Again! Good job 👍

    • @MosinVirus
      @MosinVirus  2 ปีที่แล้ว

      Thank you very much

  • @OreGear
    @OreGear 9 ปีที่แล้ว

    Excellent video! I sat down a couple days ago trying to try figure this all out myself and gave up. This explanation was all I needed! Great work!

    • @MosinVirus
      @MosinVirus  9 ปีที่แล้ว

      OreGear Thank you very much for watching. Glad you liked the video.

  • @rickpalluck5398
    @rickpalluck5398 5 ปีที่แล้ว

    Anytime I need a additional information,I can always depend on you to steer me in the right direction.Thanks for another very informative video

    • @MosinVirus
      @MosinVirus  5 ปีที่แล้ว

      My pleasure. Glad the videos help. I hope to be done with the house soon so I can continue making these kinds of videos