Chevy Impala Fuel Pressure Regulator Change (2000-2005)--Similar Process for Many Other Years
ฝัง
- เผยแพร่เมื่อ 11 ธ.ค. 2018
- The fuel pressure regulator is a piece of the engine that is responsible for regulating the pressure of fuel that will cycle through the engine. There are several signs you will notice if your regulator is bad or going bad. The number one sign maybe that you lose gas more quickly than normal, if this is the case, you will want to change it out very soon and this video will show you how to do that.
To Support Flashback502, please send donations to:
PayPal: www.paypal.me/Flashback502
Or
Fan Mail, Products & Donations:
Flashback502
Po Box 20201
Louisville, KY 40250
This guy makes wonderful tutorials for the impala very informative and directions a toddler could follow definitely subscribing hope to see more !
Glad could help, thanks for the comment, and thanks for sub
I've spent all day learning how to remove my throttle body, which I'm now prepared to do. Thank goodness you've shown a way to bypass that! I've just changed my regulator. The only thing I had to do differently was to back out a throttle body screw that was in the way of backing the regulator out of the engine. Saved me a lot of time. Many thanks.
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thanks. You saved me 30 minutes not removing the throttle body. Fuel pressure regulator was causing hard start cold engine, not bleeding fuel into vacuum line.
Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
Next time pull the pump relay first start the car multiple times until the engine won’t start anymore that way the engine sucked all the gas out of the lines. Then when you remove the regulator there won’t be anymore pressure in the lines. All you did was cut the fuel pump why’ll it was running but you didn’t get all the pressure out of the line
Good advice thanks Please subscribe & like and share if haven't already and check out our other helpful videos
Thank you!! The other video I watched didn't show how he got that big 15/16" (or 24mm) wrench in there. Glad you could do it with a pair of pliers. Yes, I flinched when the gas squirted out LOL! I have had O2 codes set but they went away, the gas smell and occasional leak is what got me looking. Turned the pump on, and the thing was covered in gas. Had my wife come out and turn it on so I could see where it was coming from, and nothing!! Thanks for most importantly showing us how to put it back together!!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thank you for actually showing how to do it, a lot of people that make videos on this are just like "well I already have the new regulator in but I'll tell you how I did it" as if that helps anyone trying to figure out exactly what to look for
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Exactly what I was looking for and beautifully explained and video is great. Algorithm needs to rank this much higher. Maybe add some more keywords to include the other GM vehicles and engine sizes this repair applies to. Thanks for everything!
Thanks for tips ☝ Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
this video just saved me 260 dollars, thank you so much
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thanks, best video i’ve seen yet on this
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thanks for this video. It was very helpful. Just a few minor things though: my '04 3.4 needed a T-27, not T-30. I just went ahead and replaced that pain in the a$$ bolt w/a 10mm flange head M6-1.0 x 25mm bolt, although it could've used more like a 20mm or shorter, but that's what I had on hand. The bottom fuel line fitting was stuck to the regulator and wouldn't move, so I used the 24mm wrench and a 15/16 (I didn't have two 24's) to twist the opposite way to unstick it. I had a much more difficult time than you did, but I wanted to put that out there for people that might have the same issues. Thanks again!
Thanks for info. Glad could help Please subscribe like and share 🙏.and check out our other helpfull videos.
My dude you kilt me when you said socket wrench 😂 idk why but that was so funny. Good skills tho, I used your video to verify if I got the right regulator or not, thanks man. I subscribed cause you’re funny.
Lol yea sometimes things come out funny when filming. Thanks for sub.
Great vid and explains! Thanks for sharing! 👍🏻👍🏻
Thank you sir for showing how to do this! I have a 2002 impala and I need to replace mine, it is just beginning to leak, but I know it will get worse.
Your welcome
Thank you! explained it very well..
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Nice video. Most mechanics would remove the throttle body assembly plus other lines. You showed these things can be worked around. When you removed the reg from the injector port there was a lot of fuel leaking under pressure and not leaking out of the vacuum port which meant the diaphragm was good. Most regulators on these models will leak fuel from the top vacuum line when the diaphragm goes bad. Good job.
Thanks for helpful info, yea sometimes a repair can be made harder then it needs to be. Please subscribe & like and share if haven't already and check out our other helpful videos
Thank you very much. Nicely done.
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Great video. Thanks!
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
OMG thank you so much... Single black mom couldn't afford to pay. Glad I didn't easy to do myself. Plus go take all these parts and tools I don't need.. You're Heaven sent🙏🙏💃🤗
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Excellent video I used 1/4 ratchet and torx bit in socket and taped it every thing went well
Glad could help Please subscribe like and share 🙏.
Did anybody flinch when gas squirted out ?😂
Lol Yea got me. Please subscribe & like and share if haven't already and check out our other helpful videos
Just did this on my 03 3.4L Impala. It was showing all the usual symptoms of failure e.g. hard starting, especially when warm. The symptoms abated when the vacuum line was disconnected, forcing maximum fuel pressure. I figured I'd be okay for a few days until the replacement arrived, but it was leaking gas out the vacuum port, bad. So off to AutoZone.
The correct tool to use would be a "flare nut" wrench. Too bad AutoZone didn't have one that large. TAKE YOUR TIME and go slow if you use an adjustable wrench. If you round off the nut, you'll probably have to replace the two fuel lines along with all the extra disassembly.
Definitely make sure you wear eye protection when you do this and wrap it in a sock or something when you pull it. Better have it and not need it, but it's a good habit to have a fire extinguisher handy whenever working on the fuel system too.
Thanks for info. Glad could help Please subscribe like and share 🙏.and check out our other helpfull videos.
Thanks for the RED Warnings. :-)
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Fix anything brother keep it going.
Thanks for watching, most definitely, glad could help.Please Subscribe and share if haven't already and check out my other helpful videos.
Well done, thanks.
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Did you have to loosen the bolts to pull it off ? Didn't see that part if you did
Thank you so much .
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Thank you
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
The FPR is new and I notices when checking the connection of the ETC because; my fans dont kick on till fiel temp gauge hits 3/4 on the needle. Or; just turn on the heater defrost on AC. I found that fuel was leaking onto it the ETC. I pulled the line off the top dry. Cleaned FPR dry and it is getting wet somwhere in the middle. Its late now however; if the regulator is new. It may be improperly installed. I will use your install method to take off and reinstall myself. No need for the mechanic.
Hope u get it fixed 👍🏿 please subscribe like and share and check out our other helpfull videos.
Very helpful and expertly explained.
Thank you for this awsome video. I am definitely liking, subscribing and sharing!👍🏽🔧. I'm installing a new one on my 2002 impala because it's leaking out the top but also it seems like my car is laking power and the transmission is not shifting smoothly. Should this fix this problem? I'm planning on replacing my in-line fuel filter as well.Thank you again.🛐✝️
Your very welcome, thanks for sub and like. Yes this can cause many problems.
I just changed out my impala fuel pressure regulator. I had to cherry pick your method and went beyond. I had to back out the one 13 mm bolt holding the Throttlebody to make room for the regulator to come out properly. Also I disconnected the fuel line at the connector on the other side of the throttlebody to give me some flexibility to get the bottom inlet line nut loose as it was not easy to break It loose. I ended up mutilating the old regulator to get a grip on it to break the nut loose. I’m assuming that’s why you did not do a in-process video because I think maybe you had to hack At the old regulator that you replaced, I could be wrong. Anyway I did not have to take the throttlebody off at all and the whole process took an hour.
Thanks for tips ☝
Say my torque screws stripped any suggestions on how I cam remove it without a dremel?
On the other side of the fuel rail there’s a bolt to relieve the fuel pressure. You wanna do that before you take the regulator off so you don’t squirt fuel everywhere. Other than that good video
Just did this today it was harder then i thought haha but still great video thanks for posting. Helped me alot.
Thanks for watching and commenting glad was able to help. Please Subscribe and share if haven't already and check out my other helpful videos.
whats the hose thats connected to it called? some reason mine is broken and need to purchase one.
Bravo
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
What year is that impala because mines is a 2005 and for some reason my pcv valve won’t come off because they say it’s life time and that fuel line at the bottom is the only thing I’m having a hard time with
It is a 2001, yes it can be kinda hard to get off sometimes.Please subscribe & like and share if haven't already and check out our other helpful videos
What’s that top line called when I took it off it broke... is it hard to fix?
No it's not hard to fix can get at junk yard or just buy a piece of pipe and add to broken part. Please subscribe & like and share if haven't already and check out our other helpful videos
New fuel pump. Gas is getting from the pump to the filter but not to the filter to the motor , relays are good , can i just run a fuel hose from filter to engine ?
Sorry not sure
So will the car take a few trys to turn back on after install?
Some cars may
I’m having a huge issue trying to put the fuel line back into the fuel pressure regulator
Sometimes you just have to play with it also be sure you got the right size. Please subscribe & like and share if haven't already and check out our other helpful videos
Will it cause smoke out the back?
Most likely not, that's normally your car burning oil. Please subscribe & like and share if haven't already and check out our other helpful videos
you should pull your fuel pump relay before you do that. Just saying. Also you can let the pressure out first with the valve you check fuel pressure at.
Thanks for helpful tip.
Hey what code did this problem give you??
Didn't give code just gas smell especially in morning. Please subscribe & like and share if haven't already and check out our other helpful videos
Good video not a monkey wrench it's a crescent wrench a monkey wrench is a pipe wrench.
Lol👍Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
I love when black people do car videos because they shut up and cut straight to the chase. most annoying thing ever is when people blab. idc about how much your tools cost, where you went camping, how much you weight, etc. just shut up and show me how to replace the damn part. thank you for getting to the point.
Lol Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
There's no way that nut at the bottom wasn't already loose you had the monkey wrench on for like 2 seconds... I have the same wrench and it rounded it off. UGH