2004 Chevy impala fuel filter replacement : Philadelphia
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- In this video I will show you how to replace a fuel filter on a 2004 Chevy impala with a 3.4 L engine.
Tools needed:
Fuel filter housing bracket 13mm (1)
Monkey wrench
Fuel line nut size 16mm (1)
Always remember for better, faster service QuickFix Auto
Please follow us on Facebook at / quickfixhere
Subscribe to our Channel here!
Instagram @quickfix_here
Thank you for posting this. You have been a huge help with my new to me impala. I would like to have seen you been a lil nester with the fuel that spilled out on the ground. Lol. But your mechanical knowledge was a huge help. Thank you
Thanks for the post dude, every little bit helps, thanks again!
Excellent at home service.
Ive been to that exact area in Philadelphia before, lovely place
Fuel filter changed. Now, change the right directional bulb. lol
(It was blinking pretty fast)
Nice video. I was able to follow all of the steps perfectly.
Unfortunately my fuel line is rusted on the bolt connecting to the filter. Do you have any tips? Or maybe the name of this fuel line?
2001 chevy impala 3.4lt
Try Freeze-Off by CRC
Thanks for the video. Any rust buster fluid works to help break loose the rust. I spray the rusted nuts and let it soak while I do an oil change... About a half hour. Also, I check the rubber O ring on the fuel line at the discharge end of the old filter. New filters come with new O rings most of the time. Old bad O ring will cause a leak. Also place a basin under the car to catch the leaking gas when changing the fuel filter.
Helpful video, would this probably be the same process for a 2010 model?
Does your impala have long shifts from 1st to 2nd gear
That’s what I was curious about mine does
@@BDDbeau Don't they all? My has been doing it for about 15 years even after multiple transmission filter changes. It is probably a solenoid as erratic and hard shifting can occur from a failed transmission pressure control solenoid. Even when repaired they tend to fail that is why I've just ignored mine for about 150,000 miles.
So at the 4:53 point where you press in other side and release...you did not prep/ disengage that prior with the special disconnect ring tool? So these Chevy's just push in and release ?
I knew it was fairly simple, just wanted to do it right... It's either the filter or fuel pump cause I got no pressure at the Schrader valve
Thank you so much bro seriously thank you my I know this sounds childish but I’ve been wanting to be one with my car and I’ve been wanting to learn how to change the fuel filter so thank you
My pleasure I am glad I could help!!
QuickFixHere it’s funny I just watched how to do the radiator flush as well I did it today and it was perfect thanks again
My pleasure man! I truly appreciate you taking the time to comment seriously!
Great video
Awesome video thanks for help!
I have an 04 impala the won’t start in the mornings it will backfire sputter turn on then turn off, once I get it started and get to driving it is fine the rest of the day.
Good job !
Forgot take fuel relay fuse off during process
Fuel catch pan for that gasoline. Lots of details over looked.
I'm surprised that you didn't prime up the fuel pump 3 times prior to starting the car. Good video, but lots of safety precautions were over looked.
Why did you do it Mizzou car not running right was it putt putt putt putt putt putt putt
You need to unplug your fuel relay fuse and then run the car until it dies to relieve the extra pressure in the fuel line. and get a little better control of that wrench
Can u help me find out a part
The line under the super charger ? I searched it up but nun specific is coming up
My car smell like gas in the inside in it keeps cutting off🤔I wonder if this is the problem? I have in 04impala
Could be that or your catalytic converter
That sounds like your cat, or could be evap system leak
Plus it keeps causing me to waste more gas I wonder if its the fuel pump or the fuel filter
That would come off alot easier if it was changed regularly like it should be.
Need to edit this video down to 4 or 5 minutes, to much fluff...
Yeah lol