I came here just for the pro tip! I couldn't figure out why they weren't releasing on my 2nd time of doing it now. Thank you for saving me a lot of time and frustration!❤🔥
THANKS T.T ‼️ The owner of the company I work for asked me to swap out the tire on his Himiway . Greatly appreciate you posting this, just cut down on having to figure it out, lil more confidence in doing it to. Again many THANKS 👍👍
Glad I could help. I know you’re probably not adding liners, but this video might help in the removal of the tires as well. th-cam.com/video/V936CyOfee4/w-d-xo.html
I’ve used your videos in the past to help repair my Himiway. I just want to make a comment regarding you removing the part about using a persuader to tap the rear axle loose. I do not have the strength to align and remove the tire properly. I had no choice, but to use to a persuader. Your original video explained how to do it properly without ruining the threads, that should still be in there as an option so people know how to do it properly if needed. Thanks again for sharing your knowledge.
I appreciate your feedback. It is better if you can align the flats and work the axle out of the dropouts. For your reference keep the nut on the axle and “hit” that nut in lieu of the threads. Use a rubber mallet if at all possible.
Thanks for redoing this video. I watched the first one you did and was looking for that one and then saw this one which you just posted a few hours ago, perfect timing. I have put 1700 miles on my Himiway and now it’s time for a new tires. Well done.
Glad it was helpful! I can’t disagree with you. To be honest, I have always sent my wife home to get the truck so I could fix the issue at home in my garage. It’s just easier.
Hey! Well I did it. All your videos helped so much. I even replaced the disc bc it wears unevenly bc the caliper doesn’t cover it all the way. Have to figure out a modification for that. I noticed that the screws for the old disc and the new one were very sensitive. A number of them had to be removed with a drill. Have you noticed that? Was wondering if I was using the wrong sizing I’m thinking of getting a newer bike like the Escape and have both so I have a back up in the event of a flat. I did pretty well, over 3000 miles before my first one. And I just replaced tires too. Do you prefer the equivalent LYNX or Magicycle
I didn’t have any issues with replacing brake rotors. The screws came out without too much encouragement. The Lynx and the Magicycle Ocelot are pretty different. The Magicycle has a couple glaring issues. The first is, if your a taller rider (6’ or over) the seat post doesn’t go down in the tube very far and it can cause problems. If you’re under 6’ it shouldn’t affect you. The second thing is both good and bad. It has a LOT of power. Not so much that it is scary, but enough to just fly up hills. The problem lies in “ghost” pedaling. Because of the power you very quickly end up ghost pedaling as the motor powers thru. That being said, I simply love riding this bike. it’s easy on and off and has nimble steering. It’s a fun ride! The Lynx out of the box is a really nice bike. Great power, easy on and off with a nice sitting position. I really haven’t had too many issues with it at all. My wife has been riding it a lot and loves it. I don’t think you can go wrong either way.
Thankyou for all the helpful videos you post. I have a question. The harness connection to the wheel is seized up. What caused this and how do I loosen this up or most I totally replace the harness?
For the cruiser, I know that Himiway have used two different connectors over the years for that connection. I have heard of them seizing. And I can only think of a couple reasons that might happen. The first, and least likely, would be dust, dirt or debris working its way in and causing the issue. The second reason, and most likely, would be the connector overheating and basically melting together. In the latter case the connector would need to be replaced.
Very good and detailed video Tim. How do you like that Kobalt wrench? I have a couple of Crescent wrenches but they aren't made like the original ones. Quite a bit of slip with them.
I haven’t had any real issues with it. You see me adjusting it a lot in this video, but that is due to the right and left axle nuts being different sizes and not because it loosens up. And I do like the rubberized grip, it makes it very comfortable to use.
As far as I know you need to contact support for those replacement parts as the pinouts to the controller are specific. Beyond that you would need to find a motor, rim , controller and probably screen combo.
Tim - I've tried the rubber mallet , and watched You turn that axle. I can not get anything to work. I'm afraid of snapping off the axle if I try any harder. What a mess !!
@@TinkeringTurtle Thanks buddy. It was a major breakthrough as I'm sure You know from Your Own adventure !! Keep up on those great videos. I'm so close to popping on a Himi Zebra/
Speaking of changing over time, I was wondering if you can answer some questions about the Himiway Cruiser that is shipping out at this time. I've read in a few places, not official sources, that the bike now has the Bafang motor and the connector appears to have only three conductors, leading me to believe that it's sensorless, and the motor wires are now larger gauge??? Also, the speed limiting screen, "LS" on my bike had a factory setting of 32kph and only goes up to 40kph. I'm good with that speed limit, but was curious if that was common now??? Thanks
Hi Victor, I can’t speak to the motor or wiring as I don’t have one of the new bikes. For the speed limiter, I have heard for over a year now that the Himiway bikes are limited to 25 mph (40kph). Sorry I can’t give you more info.
@@TinkeringTurtle I can confirm that changing the wheel size diameter in the controller is a way around the factory speed limit on bikes with the 40kph limited software version. It also gives a false speed reading and odometer measurement, but if you just want to go faster.......I chose the 24in diameter option and the local speed monitor clocked me at 28mph while reading 24mph on my display, whereas the factory setting only achieved around 22mph on the same neighborhood radar sign. It feels plenty fast for a large, heavy bike with marginal braking power. :)
I have BIG Problems with the rear tire. Two people have replaced Blown Tubes during the last year. After each job, the motor makes "Struggling Sounds". Today, 6/26/23 the bike shakes so much that I am uncomfortable riding it. Suggestions? I would email you but I have failed at figuring out how. HELP!
Sorry to hear that. This may sound odd, but I would check the connectors between the controller and the motor. It sounds like that connection isn’t fully seated. Pull the connector straight apart, do NOT twist. Check both sides for dirt or debris…make sure it’s clean. When putting it back together make sure to line up the arrows on each side of the connector, then push them straight together. Make sure it is fully seated. Hopefully that will straighten everything out.
@@TinkeringTurtle YOU ARE THE BEST!!! Took it apart. Wiped it down. Put it back together. Took a Quick Ride. No Noise. Total Smooth. (That means that the two people that changed out the rear tire tubes never connected properly? Total Power not received by motor? Let me know.). Now...what happens when I take my next Ride. :0
Most likely they didn’t push it together all the way. So the connection possibly was “arcing” (for lack of a better term) and that intermittent connection gave you the stuttering affect. I am hopeful that your next ride will be smooth as butter! Enjoy the ride. 👍
@@TinkeringTurtle Not so Fast My Friends...2nd Ride, Shutter Sound back. Brought it back, Unconnected and Re-Connected. Third Ride. No real noise. Stay Tuned. Comments welcomed. It's one of those things that try to make it "Do It" for a Repair Tech and it won't...
Error 25 is a brake abnormality. Removing the rear wheel and putting it back on shouldn’t affect that particular error. Unless you somehow messed up the rear caliper. Typically error 25 means the brake handle isn’t returning to its normal resting position. Error code 25 is a brake fault. Typically this is because the sensors in the brake handles are not closing. I always advise people to do a brake adjustment…this ensures the brake handles are returning to their full resting position when released. Brake adjustment video: th-cam.com/video/iHc-N9AjuDQ/w-d-xo.html After that, if the issue persists you will need to determine which brake handle is causing the issue. With the bike off unplug one sensor at a time and restart the bike to see if the error is gone. Repeat for the other side to determine where the fault is coming from. These plugs pull straight apart, DO NOT twist. Make sure to line them up correctly when re-inserting. When you determine which sensor is causing the issue, follow this video to adjust them. (Make sure to loosen the set screw before tightening or loosening the sensor) Brake sensor adjustment video: th-cam.com/video/ZbfRf89XFr0/w-d-xo.html Hope this helps
I would like to see the video where You used the persuader ( hammer ) because no matter what I do I can't get the wheel to come off My Himiway Cruiser.
Make sure you follow the tip in this video to align the flats of the axle with the dropouts before using the persuader. Also consider using a rubber mallet instead of a hammer like me. But do keep the nut on to protect the axle threads. Original video: th-cam.com/video/o6vYylpkX8c/w-d-xo.html
@@TinkeringTurtle Thanks much. I did try to align the axle even with the dropouts but it doesn't seem to turn even when locking on with vice grips. I let it all go last night and will be attacking it again this morning. Wish Me luck.
@@TinkeringTurtle Finally !!! With much persuasion it's off. Now for tube , tire and liner remount - - Thanks for the push I needed. The rubber molt just bounce off too. The good ole hammer did the trick.
I came here just for the pro tip!
I couldn't figure out why they weren't releasing on my 2nd time of doing it now.
Thank you for saving me a lot of time and frustration!❤🔥
Glad I could help!
Bravissimo amico ingegnere....
Grazie per i video,la precisione,il filmato buonissimo.
Thank you!
THANKS T.T ‼️
The owner of the company I work for asked me to swap out the tire on his Himiway . Greatly appreciate you posting this, just cut down on having to figure it out, lil more confidence in doing it to. Again many THANKS 👍👍
Glad I could help. I know you’re probably not adding liners, but this video might help in the removal of the tires as well.
th-cam.com/video/V936CyOfee4/w-d-xo.html
Awesome video! Thanks for the follow up on the axel nut adjustment! Just got a flat on the rear Escape tire. Great timing.
Very glad it helped!
I’ve used your videos in the past to help repair my Himiway. I just want to make a comment regarding you removing the part about using a persuader to tap the rear axle loose. I do not have the strength to align and remove the tire properly. I had no choice, but to use to a persuader. Your original video explained how to do it properly without ruining the threads, that should still be in there as an option so people know how to do it properly if needed. Thanks again for sharing your knowledge.
I appreciate your feedback. It is better if you can align the flats and work the axle out of the dropouts.
For your reference keep the nut on the axle and “hit” that nut in lieu of the threads. Use a rubber mallet if at all possible.
Thanks for redoing this video. I watched the first one you did and was looking for that one and then saw this one which you just posted a few hours ago, perfect timing. I have put 1700 miles on my Himiway and now it’s time for a new tires. Well done.
Glad it was helpful!
What ??? New tires at 1,700 miles ?? I have 4300 on My Himiway Cruiser and am just now changing the rear only. What are You riding on ?
Thanks TT. I was having the worst time trying to get that wheel off. Great advice!
Glad it helped!
Awesome step by step, just the things I needed to hear. Thank you Tinkering Turtle
You are so welcome!
Thank you Turtle. Always so helpful. God bless you.
You are so welcome
That was super helpful, thanks!
Glad it was helpful!
Really informative video, thanks. I still wouldn’t like to remove the rear wheel at the roadside to repair a puncture. 😀
Glad it was helpful!
I can’t disagree with you. To be honest, I have always sent my wife home to get the truck so I could fix the issue at home in my garage. It’s just easier.
Great video ,I would just like to add ,taking pics to have something to check if your not sure of something.
👍
This is my second flat wanted to see your videos again
Awesome. We just got our second flat in two years as well.
Tim I’m about to attempt this on the Escape and I’m feeling confident and nervous lol.
Take pics before you start, so you have a reference when re-assembling. You got this!
Hey! Well I did it. All your videos helped so much. I even replaced the disc bc it wears unevenly bc the caliper doesn’t cover it all the way. Have to figure out a modification for that.
I noticed that the screws for the old disc and the new one were very sensitive. A number of them had to be removed with a drill. Have you noticed that? Was wondering if I was using the wrong sizing
I’m thinking of getting a newer bike like the Escape and have both so I have a back up in the event of a flat. I did pretty well, over 3000 miles before my first one. And I just replaced tires too.
Do you prefer the equivalent LYNX or Magicycle
I didn’t have any issues with replacing brake rotors. The screws came out without too much encouragement.
The Lynx and the Magicycle Ocelot are pretty different.
The Magicycle has a couple glaring issues. The first is, if your a taller rider (6’ or over) the seat post doesn’t go down in the tube very far and it can cause problems. If you’re under 6’ it shouldn’t affect you. The second thing is both good and bad. It has a LOT of power. Not so much that it is scary, but enough to just fly up hills. The problem lies in “ghost” pedaling. Because of the power you very quickly end up ghost pedaling as the motor powers thru. That being said, I simply love riding this bike. it’s easy on and off and has nimble steering. It’s a fun ride!
The Lynx out of the box is a really nice bike. Great power, easy on and off with a nice sitting position. I really haven’t had too many issues with it at all. My wife has been riding it a lot and loves it.
I don’t think you can go wrong either way.
Thank you :) replaced my tube using this
I’m glad it was helpful!
@@TinkeringTurtlejust used this video again to replace another tube. Love you tinkering turtle man
Thankyou for all the helpful videos you post. I have a question. The harness connection to the wheel is seized up. What caused this and how do I loosen this up or most I totally replace the harness?
For the cruiser, I know that Himiway have used two different connectors over the years for that connection. I have heard of them seizing. And I can only think of a couple reasons that might happen. The first, and least likely, would be dust, dirt or debris working its way in and causing the issue. The second reason, and most likely, would be the connector overheating and basically melting together.
In the latter case the connector would need to be replaced.
Very good and detailed video Tim. How do you like that Kobalt wrench? I have a couple of Crescent wrenches but they aren't made like the original ones. Quite a bit of slip with them.
I haven’t had any real issues with it. You see me adjusting it a lot in this video, but that is due to the right and left axle nuts being different sizes and not because it loosens up.
And I do like the rubberized grip, it makes it very comfortable to use.
@@TinkeringTurtle I might just get one of those. The ones I have give me fits!
Thank you - helpful. Is that the Grateful Dead I hear in the background. If so which tracks please?
It is a free soundtrack from TH-cam if I remember correctly.
Thank you! When I went to remove the axle nuts they appear very tight. Before I crank on it, is it a reverse thread?
No it’s a normal thread. lefty lost, righty tighty
Where can you order a whole new rear rim with the motor? Haven't been able to see any that is for sale.
As far as I know you need to contact support for those replacement parts as the pinouts to the controller are specific. Beyond that you would need to find a motor, rim , controller and probably screen combo.
Tim - I've tried the rubber mallet , and watched You turn that axle. I can not get anything to work. I'm afraid of snapping off the axle if I try any harder. What a mess !!
Sorry you are struggling. Maybe considering your concern about “snapping the axle”, taking the bike to a local bike shop would be warranted.
@@TinkeringTurtle Good leverage , strength applied slowly , patients. It moved and popped right out !!! Thanks for Your show & tell Tim .
@DYNABIKE1 I am glad you got it!
@@TinkeringTurtle Thanks buddy. It was a major breakthrough as I'm sure You know from Your Own adventure !! Keep up on those great videos. I'm so close to popping on a Himi Zebra/
Speaking of changing over time, I was wondering if you can answer some questions about the Himiway Cruiser that is shipping out at this time. I've read in a few places, not official sources, that the bike now has the Bafang motor and the connector appears to have only three conductors, leading me to believe that it's sensorless, and the motor wires are now larger gauge???
Also, the speed limiting screen, "LS" on my bike had a factory setting of 32kph and only goes up to 40kph. I'm good with that speed limit, but was curious if that was common now???
Thanks
Hi Victor, I can’t speak to the motor or wiring as I don’t have one of the new bikes.
For the speed limiter, I have heard for over a year now that the Himiway bikes are limited to 25 mph (40kph).
Sorry I can’t give you more info.
@@TinkeringTurtle I can confirm that changing the wheel size diameter in the controller is a way around the factory speed limit on bikes with the 40kph limited software version. It also gives a false speed reading and odometer measurement, but if you just want to go faster.......I chose the 24in diameter option and the local speed monitor clocked me at 28mph while reading 24mph on my display, whereas the factory setting only achieved around 22mph on the same neighborhood radar sign. It feels plenty fast for a large, heavy bike with marginal braking power. :)
Do you know where I can buy the right spokes for the cruiser?
Sorry, I am not well versed in spokes. I would likely check a local bike shop for that.
I have BIG Problems with the rear tire. Two people have replaced Blown Tubes during the last year. After each job, the motor makes "Struggling Sounds". Today, 6/26/23 the bike shakes so much that I am uncomfortable riding it. Suggestions? I would email you but I have failed at figuring out how. HELP!
Sorry to hear that. This may sound odd, but I would check the connectors between the controller and the motor. It sounds like that connection isn’t fully seated. Pull the connector straight apart, do NOT twist. Check both sides for dirt or debris…make sure it’s clean. When putting it back together make sure to line up the arrows on each side of the connector, then push them straight together. Make sure it is fully seated. Hopefully that will straighten everything out.
@@TinkeringTurtle YOU ARE THE BEST!!! Took it apart. Wiped it down. Put it back together. Took a Quick Ride. No Noise. Total Smooth. (That means that the two people that changed out the rear tire tubes never connected properly? Total Power not received by motor? Let me know.). Now...what happens when I take my next Ride. :0
Most likely they didn’t push it together all the way. So the connection possibly was “arcing” (for lack of a better term) and that intermittent
connection gave you the stuttering affect.
I am hopeful that your next ride will be smooth as butter!
Enjoy the ride. 👍
@@TinkeringTurtle Not so Fast My Friends...2nd Ride, Shutter Sound back. Brought it back, Unconnected and Re-Connected. Third Ride. No real noise. Stay Tuned. Comments welcomed. It's one of those things that try to make it "Do It" for a Repair Tech and it won't...
Hi I did this and now getting an error 25 (brake) and no power UGGH any suggestions..
Error 25 is a brake abnormality. Removing the rear wheel and putting it back on shouldn’t affect that particular error. Unless you somehow messed up the rear caliper.
Typically error 25 means the brake handle isn’t returning to its normal resting position.
Error code 25 is a brake fault. Typically this is because the sensors in the brake handles are not closing. I always advise people to do a brake adjustment…this ensures the brake handles are returning to their full resting position when released.
Brake adjustment video:
th-cam.com/video/iHc-N9AjuDQ/w-d-xo.html
After that, if the issue persists you will need to determine which brake handle is causing the issue. With the bike off unplug one sensor at a time and restart the bike to see if the error is gone. Repeat for the other side to determine where the fault is coming from.
These plugs pull straight apart, DO NOT twist. Make sure to line them up correctly when re-inserting.
When you determine which sensor is causing the issue, follow this video to adjust them. (Make sure to loosen the set screw before tightening or loosening the sensor)
Brake sensor adjustment video:
th-cam.com/video/ZbfRf89XFr0/w-d-xo.html
Hope this helps
I would like to see the video where You used the persuader ( hammer ) because no matter what I do I can't get the wheel to come off My Himiway Cruiser.
Make sure you follow the tip in this video to align the flats of the axle with the dropouts before using the persuader. Also consider using a rubber mallet instead of a hammer like me. But do keep the nut on to protect the axle threads.
Original video:
th-cam.com/video/o6vYylpkX8c/w-d-xo.html
@@TinkeringTurtle Thanks much. I did try to align the axle even with the dropouts but it doesn't seem to turn even when locking on with vice grips. I let it all go last night and will be attacking it again this morning. Wish Me luck.
Good Luck, be careful!
@@TinkeringTurtle Finally !!! With much persuasion it's off. Now for tube , tire and liner remount - - Thanks for the push I needed. The rubber molt just bounce off too. The good ole hammer did the trick.
It's almost as if something is not put together correctly...
Let me know how it goes.
sell me your bike seat I will pick it up!! the one you are not using any more Cloud-9 Saddle I can pick up today i am in Michigan
Sorry I used it on another bike, it’s not available.