Best ebike accesories and upgrades for my Himiway - Tinkering Turtle
ฝัง
- เผยแพร่เมื่อ 1 มิ.ย. 2024
- Today I am giving an overview of the upgrades I have done on my Himiway as well as covering the accessories and bike tools I carry with me while riding. Below are the links to all the parts and tools I have purchased.
Edited to add: I also list a 19mm wrench below that I purchased after filming this video. I got a tip from a subscriber that the nuts on the rear tire are different sizes. One is 18mm and the other is 19mm.
Tinkering Turtle
Component links:
Wake MTB Stem 31.8 90mm 110mm 0-60 Degree Adjustable Bike Stem
amzn.to/37FA5bu
Wake Bike Stem Riser Bike Fork Stem Extender
amzn.to/34umjGJ
TruActive Unbreakable Bike Phone Mount Holder
amzn.to/3jqHX2Q
Cloud 9 bicycle seat
amzn.to/2FWt4aD
Cloud 9 bicycle seat without springs
amzn.to/3xp1Nnn
Suntour NCX suspension seat post 27.2mm (requires shim to fit Himiway)
amzn.to/40QWKcQ
Seatpost Shim (use with Suntour suspension post) 27.2mm - 30.4mm
amzn.to/2ZvO3dN
Splumzer Bicycle Shock Absorber
No longer recommended! My wife’s broke less than two years in, mid-ride.
Tannus armour inserts
tannusamerica.com/products/ta...
Lixada Bike Rear Bag Bicycle Pannier Bag Saddle Bag 25L
(I no longer endorse this bag. The stitching has failed on several seams.)
Electric Bike Company Thumb Throttle
amzn.to/443Op83
Rockbros Bike Handlebar Grips - use with thumb throttle above
amzn.to/3PNS0Qv
PACEARTH Bike bar end Mirror
amzn.to/3LLKENW
Lizard Skins Fork Boot Black
amzn.to/3AJfiRA
Rhino USA Heavy Duty Tire Pressure Gauge
amzn.to/2J4bjaK
Hopopro Mini Bike Pump
amzn.to/3mjnZc2
Park Tool Vulcanizing Patch Kit - VP-1 (One Color, 2Pack)
amzn.to/36y75l2
50 Strong Bike Tire Lever - Set of 4
amzn.to/2Ju1Ud3
Kryptonite KryptoFlex Looped Bike Security Cable
amzn.to/3od30bG
Etronic Bike Lock M6, Cable Lock 6 Feet Long Coiled Lock
amzn.to/3oiL2Vy
Short iPhone Charger Cable
amzn.to/3z7csms
Park Tool PT-09 Shop Cone Wrench 15mm
amzn.to/2VsFQBM
Park Tool PT-09 Shop Cone Wrench 18mm
amzn.to/3mASWc6
Edited to add: you also need a 19mm wrench as the rear right side nut is bigger than the left.
I found this out after filming from a subscriber.
Park Tool PT-09 Shop cone Wrench 19mm
amzn.to/2WstZEm
BELINOUS Safety Glasses, Polarized Motorcycle Riding Glasses
amzn.to/37oMlLG
Bicycle Hoist 2-Pack Quality Garage Storage Bike Lift with 100 lb Capacity
amzn.to/2TBdxQW
As an Amazon Associate I earn from qualifying purchases.
Thanks for watching, please subscribe!! - กีฬา
Your channel is a big help. My Himiway will be here this Thursday. Can't wait!
Hope you enjoy it!
I am so very glad I can help. Enjoy the ride!
I really enjoy your videos, they're very informative and helpful. Thank you and keep up the great work, looking forward to watching more!
Awesome, thank you!
I just purchased a Himiway ebike and your videos are a big help. Thank you!
Glad to help!
Thank you for your vids on the Himi. Very Himi-ful of you.
Glad you like them, my pleasure!
Enjoyed the video. Lots of good and useful information you shared. Thank you for posting.
My pleasure!
I appreciate your down-to-earth practical advice and presentation. Each accessory you showed is good guidance for what we need with our ebikes, even if we select different parts. Thanks Tim!
I appreciate that!
Just an FYI, I have withdrawn my support for the Lixada pannier bag. Less than a year in and the sewn seams on the bag are failing. To that end I have removed the link for that component from the description of the video.
@@TinkeringTurtle Fair assessment. The only way to know if an accessory has longevity is to use it. U da man!
Great tips! I just bought a himiway and need to upgrade it thank you!
Glad it was helpful!
Nice job on the accessories. I ordered several of those items for my Himiway. I’m hoping I can adjust the suntour post low enough for me. Great video, thanks!
Fingers crossed! Good luck!
Tim, that eBike hoist you and your wife have is a space saver for sure, you guys have got talent you haven't even thought about using friend. You are amazing with what you can do with your analytical mind and talented working hands, you are Blessed. Thank you for always answering my questions too.
Those are very kind words, thank you!
I’m very glad the info is helpful!
Thank You ! You are the Man ! Watch all your video's and learn ! Thank again !
You are welcome!
So appreciating you TT💯👍🏽👌🏽
My pleasure, thanks for watching!
Tim, I switched out my handlebar stem and riser to: FOMTOR 31.8 Adjustable Stem 0~90 Degree 80mm MTB Adjustable Bike Stem for 31.8mm(1.25") Handlebar Mountain Bike, E-Bike. both riser and adjustable stem in one unit. Works Great! Bought it on Amazon...
Very nice!
I have a Himiway Cruiser step-through coming so your videos are Great!
Thanks, I’m glad the helped!
'love the thought-process you've put into this video, Tim. I think I'll setup my garage with a pulley system similar to yours for when I need to troubleshoot the bike. My existing bike -repair stand is not built for the Himiway's weight. LOL! For future contents, I would love to hear/watch your ideas around extending the battery's longevity (for 30+ miles riding) via a spare battery or slaved charger. Thanks very much!
Thank you!
Interesting idea for a video. Just an FYI for you, on our cruiser and stepthru we set the PAS low and the gear as high as we can stand. If we run around 15 mph we have ridden 45 miles, switched batteries midway, and had battery bars to spare when we finished. Enjoy the ride!
Great Detail Thanks for all the info
Glad it was helpful!
Excellent video! We are new owners of Himiways and there is a lot we don't know Very helpful!!
Nice! Glad it was helpful!
TT - Thanks for this video. Outstanding. My new Himiway arrived two days ago and I'm already looking for doing some upgrades. Like you, I'm a bigger rider, 250 6'3". My wife's Himiway should be here at the end of August. We also live in Michigan and looking forward to riding during the winter months as well. We are in Milford and looking to try many of the rail to trails in SE Michigan.
Glad I could help!
You have helped a lot of people with your videos. I know this takes a lot of effort on your part. I just wanted to say thank you very much.
I appreciate that! Always glad to help.
Nice info! Thank you!
Your welcome!
Extremely helpful video. Thank you so much for uploading. I’m also a heavier/taller rider and I really appreciate the mods you’ve made to make the bike more comfortable.
Glad to help! Enjoy the ride!
Awesome Video!! Thank you!
Glad you liked it!
Another great video!
Glad you enjoyed it!
Mr Turtle you make fantastic videos ...EH!
Thank you kindly!
Randomly stubled on this, just purchased the Himiway Cobra (still about a month away from delivery) and these are some great universal upgrades, especially for us big and tall guys.
Glad you like them! The Cobra looks nice!
Thanx for the link re: hoist system! Very helpful!! Do you have the rear straps for sale? BTW... I have your battery covers and the work perfectly and add a touch of class to the bikes when on our carrier 😎.
I don't, the’re just a 1” strap 32” long with a d-link sewed into both ends. Hope this helps.
fabulous😍😍😍
I appreciate it!
Great information and I have ordered some of these accessories. I may add more once I get these installed. As of 2-7-2021, The thumb controls are out of stock.
Glad it was helpful!
Even my alternative link for the thumb throttle is sold out. I’m sure they will be restocked soon. Enjoy the ride!
I found another throttle listing if you still need one.
amzn.to/36Ruqh1
@@TinkeringTurtle Thank you, it looks like that one will work. I will get it ordered. Thanks for all of your informative videos.
Been watching all your videos, as I recently received my Himiway. Even ordered the terminal covers. Thanks for being a great resource. I do have a question though, do you have a different bag recommendation if you no longer recommend the "Lixada Bike Rear Bag Bicycle Pannier Bag Saddle Bag 25L"?
Glad you like the videos!
I replaced the “Lixada” bag with the “Rockbros” a few months ago. It’s much more expensive, but so far it is holding up extremely well. I like it!
Rockbros pannier bag link:
amzn.to/3kwcqiD
Hello, I have just purchased your Himiway model and have Tannus liners on the way. We are the same size and weight and I would like to know the tire pressures you settled on. You have done a fine job with your videos and the information has been a great aid. Thank you.
I run 25psi on paved paths (conventional wisdom is 20psi pavement, 15-20psi for dirt, 7-10psi for sand.)
Enjoying your Himiway videos and looking forward to more. Can you tell me if your regular frame bike and your wife's step through use the same battery. We are considering two bikes like yours , and wonder if we could swap the batteries at the mid point of a ride if one rider was using quite a bit more battery assist than the other. Thank you.
Yes, the batteries are interchangeable. My wife and I swap batteries on are longer rides to even out usage as I am significantly heavier than she is and she uses way less power.
One note is the keys are unique to the battery cradle (bike) but the batteries will fit in either cradle...if that makes sense.
Enjoy the ride!
@@TinkeringTurtle Thank you
Thanks for sharing,
My pleasure
Hey Tim, I saw you on a Moinyonon Fashion fork stem extender commercial!
They must have clipped my TH-cam then. I didn’t give anyone permission…😕
Great reviews! Have you found a decent hitch hauler bike rack for 2 yet? Were over in WI and just bought 2 of these. Thanks in advance!
Thanks. Unfortunately I don’t use a bike rack, I load the bikes in my truck for transport. Sorry I couldn’t be more helpful. You might check out the Himiway Facebook groups. I’m sure you can find recommendations there.
Hi Tim, outstanding incite into the bike. I've added a lot of your recommendations and all work great. My big mess up was I added some cheap semi hydraulic disk brakes...they are a lot quieter and smoother, but very little stopping power, almost dangerously little stopping. I can plan ahead to slow down, but yesterday when a bear zipped in front of me, I couldn't even lock the wheels or rapidly slow down! Luckily he was on a mission and just kept going. What's your best advice for upgrading the brakes...such a huge price jump from the $40 to the $140 semi hydro brakes. Thanks for any input, for know I think I'll go back to the noisy mechanical brakes. An 80lb bike with a 225lb rider zooming down a mountain trail is scary!
Hi Jim, to your brake question. I have not done the upgrade, my bike paths are pretty flat and I haven’t needed the extra stopping power. But from what I have read, the people that seem to be happy with their brakes are the ones that purchased from Bolton ebikes. They are the Juintech M1 hydraulic calipers…$149.
I may consider upgrading one of my bikes down the road to test them out, but I am not certain when that will be.
Did you get a flat while using the Tannus insert? I would be interested in hearing that story, Keep it up, GOOD JOB.
Yes we did. My wife picked up an inch and a half long nail passing by an industrial park. Buried I. the tire all the way to the head.
Neither Tuffy or Tannus would have prevented the flat. Slime or Flatout might have made a difference, but we haven’t put either of those in. We may in the future, but we haven’t yet.
I did a couple of posts on the flat at the time in the Facebook group. “Himiway Motorbike owners club” (if you want to search them out and get more info.
Lots of good and useful information, thanks you for that, I do not have my Cruiser yet, I like to order a Seat Post Suspension just wonder if 30.0mm will work?
Glad it was helpful!
The stock seat post size for the cruiser and stepthru is 30.4mm. Most people can’t find a suspension seat post in that size, so they purchase the 27.2mm and add a 27.2mm to 30.4mm seat post shim.
Thanks for this info! Much appreciated. I have one question regarding your wife’s bike seat/suspension upgrade....How much difference is there between the original lowest seat height vs. with the upgrade? I’m interested in the same changes to my Himi ST, but am vertically challenged and can’t afford too much increase in seat height. 🙂
I would guess about two inches. For reference my wife is 5’ 6” tall.
Nice Videos! do you have bike rack that you are using on your vehicle for your bike? if so, which one are you using?
I have a full size pick up. I just strap them in the back of the truck.
You might search thru the Facebook groups, lots of info there.
Great video. Can I ask I am about your size and I was wondering how many miles you get on 1 battery charge with normal riding. Thanks for the great content.
I am 6’ 3” tall and around 300lbs. My wife and I have done a 45 mile trip where we switched batteries at the half way point. At the end we had one or two bars left. For most of that ride we were going around 15 mph.
check out the video here:
th-cam.com/video/V5HvWfyQd94/w-d-xo.html
Where did you use the 15 MM wrench....you are my go to guy for everything Himiway....thanks for helping me out....!!!
All the links are in the description of the video. But here is the link for you!
amzn.to/2VsFQBM
Thanks again for the info 👍👍still waiting for my himiway to ship. wife's rad mini step thru was here in less than a week caint wait to get riding do u think the tire inserts work well to prevent flats sence you all put them in. Thanks
Hi Pat, since we installed the Tannus liners in our bikes we have rode approx. 1400 miles each. We have had a grand total of one flat. My wife picked up an inch and a half nail in her rear tire.
Meanwhile we have hit innumerable amounts of bike path debris that made loud noises as they pressed into the fat tire and pinch/bounced away causing no harm.
We are happy we spent the money, if nothing else it gives us peace of mind.
Thanks for the question, be sure to subscribe for future videos!
Definitely choose to go with inserts. On my second ride before Tannus a small thin chard of glass was all it took to create a flat. Since then I have confidence that those loud pops like Tinkering Turtle mentioned below won't leave me on the side of the path.
Tim, love your videos and have done many of the upgrades you recommend on mine and wife's Himiway bikes. Question, Suntour NCX suspension seat post 27.2mm (requires shim to fit Himiway) what shim size is required to fit the Himiway? Thanks
You will need a 27.2mm to 30.4mm shim. This is the one I used.
amzn.to/2IXB3W4
@@TinkeringTurtle Thanks
Hi Turtle! Thanks for all the great info. I ordered the 18mm parktool wrench but it only fits on the left side. Its to small for the motor side. Did you find this to be the same on yours.?
oh man! Your right you need a 19mm for the motor side. I just assumed both side were the same. I just ordered the 19mm for my bag and I will update the description in the video and post to the Facebook groups. Nice catch!
Here is the link for the 19mm wrench.
amzn.to/3r8kZTa
@@TinkeringTurtle lol I just ordered one too!
Tim, I'm wondering if you could add a short video, or portion thereof, on changing the front 'quick disconnect' to one of the 'skewers' so that it's not so easy for someone to steal the front wheel? I see them online, but I'm unsure of the correct length, and/or if one would be a better choice than another? Thank-you!
I will put on the list of videos I might do! Thanks!
I'm actually looking for that too and just posted about the size.
Several of your links are no longer available. Interested in updating them? Great video!! Thank you for doing this.
I’ll take a look at it when I get a little time later, thank you!
I have them updated with comparable listings. thanks for the feedback!
@@TinkeringTurtle Thank you! My bike is on order and am anxious to make many of the changes you did as soon as it comes in.
Hi Tim, I ordered the strapping and d rings, but do you have a closeup of the pattern your wife sewed on the strap to secure it to the d ring, I am trying to gauge how much of the strap overlaps the dring for strength . We sewed up some sling chair replacements this summer so I know her sewing maching will go through the strapping
TH-cam doesn’t let you post images. But the overlap is about 1 1/2” long and the pattern is a rectangle with an X going from corner to corner.
Hope this helps.
@@TinkeringTurtle Thanks again
Great video, super helpful! Please lower the music volume lol
Thank you!
I just ordered the black and white models for my wife and I , Where did you obtain the strap material that is used with the D Hook on the strap and was it just sewn straight across past the D hook. Can you also provide the length of the stapping material and size of the D Hook. Your many videos I have watched were very helpful as I narrowed down my choice for the ebikes.
Hi Edward, Thank you for your kind words!
The length of the finished strap was around 32”
I used 1” nylon strapping that I purchased off of Amazon
amzn.to/3ngt5qr
And the D-links are also 1”
amzn.to/37cZ59c
She sewed the end of the strap with an X and a box around the X. So much more than just a line. We didn’t want the bikes coming down on us or our car.
@@TinkeringTurtle I have my old bike mounted on the ceiling with hooks I have to manually lift and put in place but with these bikes heavier than the standard bike, I like the cable lift system which I will mount to my ceiling like you did, Thanks will keep watching for tips since my bikes will not be delivered to January 2021 I have to adjust the speed down like for the Pedal Assist you presented in another video so the bike does not take off on my wife
Great video! I would like a car bike rack . Don't want a hitch. Has to incorporate a trunk.
I am not sure how to respond to that...?
@@TinkeringTurtle This type: www.amazon.com/Allen-Sports-Deluxe-2-Bike-Trunk/dp/B00TRTSAZM/ref=sr_1_3?crid=308FMYYLM2P61&dchild=1&keywords=bike+rack+for+car&qid=1610971803&sprefix=bike+rack+%2Caps%2C189&sr=8-3
Looks good, let us know how it works with the heavier bikes!
@@TinkeringTurtle The manufacturer said they do not have a rack for my model car.
"Mr Turtle" - what size spoke wrench do I need for my HImiway Cruiser? The one on the included multi-tool (14?) doesn't seem to fit. Thanks in advance.. love your videos
Sorry Gregory, I don’t know. I have never messed with the spokes.
@@TinkeringTurtle Thanks for the reply. Keep the great Himiway videos coming.....
What are your thoughts on the amount of surface area between the front forks and the axle hubs coming through the front wheel? Seems to be only a quarter inch of contact not very much.
While I am not precisely sure of what your asking...I think you want to know if I am comfortable with the front tire interface with the forks.
The answer is yes. I have over 1400 miles on my bike. Paved bike paths, dirt trails, jumping curbs... no problems or concerns.
Hope this helps. Enjoy the ride!
Tim, I haven’t read everything you’ve posted about Himiway accessories. I did see your latest, question, have you considered tubeless tires?
Sprad
No, I have not considered tubeless tires. They don’t make sense to me in regards to an already heavy bike that gives you help you pedaling. Tubeless only make sense to me when you want a lower weight bike that is easier to pedal.
@@TinkeringTurtle Tim, that makes sense, I only weigh about 150 pounds soaking wet!
Six foot tall and still wear the same size close as when I was 16 years old, (born in 1962) Four back surgeries later, I’ve definitely lost a lot of muscle mass. I get by as best I can. That is the reason I started studying Ebikes, also the reason I don’t have one yet...
I will keep saving every nickel and dime until I own one, and no, I don’t ask for handouts. There were many years I couldn’t have cared about the cost. Disability pays about 15% of what I used to earn. The point is that many people have bad days and wish the check was in the mail and they could do whatever they wanted. Be careful what you wish for.
Great video!
I am having a problem and someone suggested that I ask you. I have had my bike about 2 months and had not had ay problems until recently. When I tried to charge the battery the last time the charger light stays green and does not charge. I am attempting to charge in the house, off of the bike. Any suggestions?
Sorry to hear that. The issue is likely either in the charger or the circuitry of the battery. Neither of which I am well versed in. My best, and only, suggestion is to reach out to Himiway support and get troubleshooting tips from them.
Sorry I could not be more helpful.
Sorry this question isn’t related to your latest video, but I really respect your input on Himiway issues. On almost every ride, I get the error 24 code and lose power. After a minute or so, power comes back on. I have checked and double checked to make sure the motor connectors are tight. Has this happened to you and do you have any recommendations for me? Thanks for anything you can share.
Hi Gary, sorry I don’t have any experience with motor issues. And I am not sure what a “motor hall signal abnormality” is. My best recommendation is to try to get it on video and reach out to Himiway support.
Sorry I couldn’t be more helpful.
Have you googled “error 24 motor hall signal abnormality”?
There seems to be some info on troubleshooting. This could be a bad wire between the motor and controller. Or something simple like water or debris in one of the connectors.
Good luck!
The Tannus inserts are great and..........You can ride a flat tire with them.
Then you had a VERY different experience than I did. As soon as my wife got a flat the bead popped off the rim and the back tire would not roll without binding up. They may be able to ride on a thin tire, but not with fat tires. It simply didn’t work.
@@TinkeringTurtle I was only going on the claim of riding with no air. Haven't tested that yet and that is disappointing. Gonna start taking a spare tube again assuming I get it operational again.
I definitely carry a patch kit when I ride.
Tim, I need to buy a different bike rack for my trailer hitch since the fat tires do not fit in my Thule Bike rack, What type of bike carrier do you carry the 2 Himiway bikes you have since I will have my wife's soon interested in knowing what works for you
I’m sorry I don’t use a bike rack. I have a full size truck, and strap the bikes in the bed of the truck for transport.
Sorry I could not be more helpful.
I have a question about the Tannus Armour Bundle with or without Tubes for the Himiway Escape is the 20x4.1-4.8 the right size for the Escape. I will purchase with the tubes
That is the correct size. On our cruiser and stepthru I spoke with Tannus support and they indicated that with fat tires, it is not as critical to get the smaller tubes. The stock tubes work just fine. I am assuming that the same should hold true for the Escape fat tires. I hope this helps!
@@TinkeringTurtle Thank you so much for your speedy reply. Your videos are so very helpful. I have one Escape and One Cruiser coming soon 4 weeks have gone by already. Thanks
I am wondering why you bought a 27.2 seat post and a sleeve instead of a 30.4? Great videos.
Good question!
It’s because Suntour does not produce a 30.4mm seat post. They do make a 30.9mm, but that would not fit in the bike. Be careful when ordering!
@@TinkeringTurtle Thanks for your reply, I was pretty sure you had a good reason. I had thought I had saw a seat post somewhere for a 30.4. So I will order what you used, no reason to reinvent the wheel. Like I said before great job on your videos. If more would look at all your videos it would eliminate a lot of questions. I have looked at the all twice if not more. You have certainly made my Himiway experience enjoyable, thanks.
Thanks! Good luck with the suspension seat post!
Hi Tim - how do you like your Lixada rear bag? Is it holding up well?
hi Rick, I like it.
As I said in the video, I did have my wife add a section of Velcro to the straps so I could cinch them up tighter to the rack.
And I put all my tools in one side and tore some stitches in the corner of the side pocket. Once I put half my tools in the other side it took that excess pressure of the seams.
The bags have held up well for over 1400 miles. I hope to be using them for years to come.
@@TinkeringTurtle I had a lectric bike that came with bags and they worked great I could haul 2 gallons of water in each bag with no damage to the bags. Sold that bike and ordered a couple of cruisers. Do you think the lixada bag would hold up to that amount of weight? I'm guessing not if the tools you showed ripped the bag. thanks Bob
No Bob, I am changing my mind on the Lixada bag. it has not held up well. I will be putting out an update in a future video. The lixada is a no-go.
@@TinkeringTurtle thank you for an honest opinion
Good Morn..the e bike thumb throttle control on your video, will it work on the zebra model with the updated motor they are selling for 2022?
Most likely yes. But I do not have any of the newer Himiway ebikes to verify that. Find the connector for the twist throttle on your bike and pull it straight apart, do not twist. Then verify that the connector is the same as shown on my video. Is it male? does it have 2 pins? etc.
Make sure to properly line up the connector and push it straight back together. I hope this helps!
@@TinkeringTurtle thanks for your reply..keep up the good work..love your videos
Tinkering.....have you found an alternative kickstand to the one supplied on bike....thanks.
Sure, if you search Amazon for a “40mm kickstand” you will find many options. Here is one that has good reviews.
amzn.to/3C6h1ii
@@TinkeringTurtle thank you very much for the help
What size seat post do you need for a Himiway cruiser?
I purchased the 27.2mm seat post and added a shim to bring it up to 30.4mm
Shim - amzn.to/2IXB3W4
Pedals have never come loose on a bicycle ever… so unless you change your pedals mid ride…
Flat out tyre sealant is way cheaper than the inserts, with the added bonus of no punctures, check out area 13 video on flat out…
thanks for the feedback…
Hi there .....will your thumb throttle replacement work on a Himiway Zebra?
Most likely yes. But I do not have any of the newer Himiway ebikes to verify that. Find the connector for the twist throttle on your bike and pull it straight apart, do not twist. Then verify that the connector is the same as shown on my video. Is it male? does it have 2 pins? etc.
Make sure to properly line up the connector and push it straight back together. I hope this helps!
@@TinkeringTurtle Thanks alot, will let you know how it works out...appreciate your input....
Hi....what tire pressure do you recommend for the Himiway crusier....front and back....thanks.
Recommended pressure is 20 - 25 psi. I personally run at 25 psi mostly on paved paths. If you run on softer terrain, like sand, the 10 - 15 psi may be appropriate. (or even as low as 7 psi)
Hope this helps!
@@TinkeringTurtle Thanks much
Hello Sir, Do you recommend Himiway Ebike ? There are so many upgrades, and i am sure that i dont need all of them. Just want to make sure if it is worthy for the current sale price ($1499). Please advise ! Many Thanks
When I did my research last spring I reviewed well over a dozen ebikes. For the price the Himiway had, by far, the best features. After 6 months of enjoying it, the only slight drawback is that it is tall and honestly that does not bother my wife (5’ 6”) or I (6’ 3”) at all. So yes I do recommend the Himiway bikes.
@@TinkeringTurtle Himiway web site claims that it will work with rider 5'3" ~ 6'4". I am 5'3''. Hope it will work for me. Thanks for your advise.
I think it comes down to your inseam. I would also suggest the step thru so you have more room when not seated. I know people have discussed inseam measurements on the Facebook groups. Maybe you can find more info there.
@@TinkeringTurtle Thanks so much
I have almost 7000 mile on my cruiser an would like to replace the front wheel bearings. I didn't see them on the web site, was wondering if you knew where I could fine some. I don't want to take it apart until I have replacements.
Sorry Wallace, while I plan on doing a video on the front bearings sometime in the future, I don’t have any idea how big or how many bearings are in there.
@@TinkeringTurtle I did look at the bearings and mine were just sitting in the wheel loose and can easily fall out. I just put it back together until I can get replacements as it's not a problem yet.
@@852wally I would take one out and head to a local repair shop. I’m sure they can point you in the right direction.
@@TinkeringTurtle Rainy day here in Sun City, AZ so I took the wheel apart again. There are nine balls measuring a 1/4 inch in diameter with no retainer. The cup they sit in looks replaceable. Need a thin wrench to hold the nut that go's against the bearings so you can tighten the lock nut so as not to over tighten the bearings when putting back together. 9/16 and 14mm were just a little to small. I happen to have and old tool that came with something and filed that to fit. I think I'll buy a new bike next year something a little smaller that has a big enough battery to go 40 miles at about 50% power and peddling. Enjoy your videos I'll be watching for your video on the bearings to see what you come up with.
👏Ace
Thanks
Since you no longer recommend the one advertised for your wife’s bike, is there another seat post you do recommend? I also have a ST as well.
I use a Suntour seat post, a little expensive but VERY nice!
amzn.to/3zzwcCL
For my wife I recently purchased the Ganoper. it isn’t quite as good as my Suntour but it takes the shock out of bumps and she likes it.
amzn.to/3NM4Nll
I always purchase the 27.2mm version and get a shim to fit the bike. That way it should fit in any new bike I get with the lower cost of a shim.
Hope this helps!
@@TinkeringTurtle Thanks I will check it out! Also, do you have a video explaining proper handle and seat height adjustment? I’m 5’4 and just getting into biking 🚴♀️
I don’t know if there is a “proper” handle bar height. I think it is whatever you like. I do show how to change the height in this video:
th-cam.com/video/lJzmAja-APk/w-d-xo.html
For seat height check out this video: (around 16min 50sec)
th-cam.com/video/w65sDsW7Uis/w-d-xo.html
@@TinkeringTurtle Much appreciated thanks.
@Eisha My pleasure, enjoy the ride!
Where do folks mount a cup holder on the Hemiway Cruiser?
I am assuming you mean a bottle holder...I know quite a few people get a mount that fits the four bolts on the front of the frame (meant for the front basket).
Personally I put my water bottle in my rear pack and just stop when I need a drink.
When ordering the mirror are they sold as pair or just a single mirror
Single, I think.
@@TinkeringTurtle oh ok thanks
Hi....how have you liked the seat suspension you put on your wife's bike....thanks.
It's good, she likes it.
@Doug R , one thing she is 5’ 6” tall and the seat is adjusted all the way down. FYI
@@TinkeringTurtle As always, thanks much.
I am 5' 10.5" tall. I wear pants with a 30" inseam. Will your suspension seat post raise me up too high?
The Suntour suspension seat post raises the seat approximately 3.5” over the stock fixed seat post. I hope this helps!
@@TinkeringTurtle It does. Thank you. I love your videos. My Himiway stepthru is supposed to arrive this month.
Awesome! I hope you enjoy your new bike!
have you upgraded the display to something that shows voltage and watts?
No, sorry I haven’t. I have been hoping that Bolton ebikes would put together an upgrade package. But I haven’t seen anything yet.
@@TinkeringTurtle is himiway using the same controller ?
I’m sorry, I don’t understand what your asking? Same controller as what?
Why are waiting for Bolton bikes? I thought the upgrade was for himiway
oh, now I understand. Bolton ebikes offers an upgrade kit for Rad ebikes. It included a screen, higher amp controller and an optional true 750w motor. I am hoping that they would do the same thing for the Himiway bikes. That way the parts would be matched and there would be instructions for install and settings.
What size Suntour seat post did you put in your Himiway?
I used the 27.2mm with a shim that brought it up to 30.4mm. Both components are linked in the description.
Thank you so much for the answer? Your videos are very helpful
Your welcome, and thanks.
@@TinkeringTurtle where did you get heavier spring for seat post?
From the Suntour website:
www.srsuntour.us/collections/seatposts/products/sp12-ncx-spring-kit?variant=27528526275
What size shim do I need to install it on Himiway all terrain ebike?
The Link is in the description of the video. Assuming you bought the 27.2mm suspension seat post, the size is 27.2mm-30.4mm for the shim.
Do you have a video of how to put the Lizard Skins on the shocks?
Sorry Bob, I don’t. But I can say they are pretty easy to install. The lower portion is precut to fit around the forks, and you just have to trim off the top to fit. I hope this helps!
OK no problem I was just concerned that you had to remove the forks to install.
Not at all. You just wrap it around them, there is a Velcro strip that attaches as you wrap it around.
@@TinkeringTurtle 👍😁 Thank You!
Which stem size did you use? 110mm or 90mm?
I used the 90mm. I detail the install in this video. component links are in the description.
th-cam.com/video/lJzmAja-APk/w-d-xo.html
What size seat post did you order
27.2mm plus shim. links are in the description of the video
Great video. You wouldnt happen to know how to reduce the speed of pa 1 to 5 mph vs 10. 10 is just too fast for off road.
The only way to reduce speed in any of the PAS levels, is to change the %. And if I remember correctly the lowest you can go in PAS 1 is 20%. I am not certain what that equates to in actual speed.
Looking for the item numbers and/or links to the various products, but not finding them - ???
The links are included in the description of the video. if you forward the video to 16min 35sec, I included tutorials on how to get to the description on various devices. Thanks for watching!
Sorry - ultimately found them. And ordered the Lixada pannier bag, the thumb throttle, the bar end mirror, the replacement grips (with open ends and screws to tighten), a couple of different foot pumps, a couple of alarms/horns, and the Cloud 9 seat. Unfortunately, we’ve apparently got a bad controller (1 day after the first and only good ride 🙁), so we’ve not been able to try any of them out yet. Thanks!
Btw, where are you located?
I hope you read in the description that I no longer endorse the Lixada pannier bag.
Sorry to hear about your controller, hopefully the will get that fixed quickly. I am in the West Michigan area.
How long did your bike take to ship?
Just under 9 weeks. But keep in mind that was during the longest wait times. I think that has improved to 4-6 weeks.
The spokes tool gadget they give you dont fit the spokes do they?
I’m sorry, I have never tried to use it.
@@TinkeringTurtle I dont think Himiway has either.
👍
thx
Hey Turtleman and anyone else that has an opinion about this. Hopefully my H Cruiser just came with a few bad parts, but I'm starting to woder if maybe my bike doesn't do that well in hilly areas which is what I bought it for.
Can you give us a little info, how much do you weigh?
Do you pedal or just throttle up the hills?
Do you gear down to help the motor as you climb the hill?
Will most of these accessories work for the Majicycle?
I would think so, yes. But as always double check sizes before ordering.
@@TinkeringTurtle ok, since im not mechanically inclined, im wanted to get those Park tool PT-09 shop cone wrenches...15mm, 18mm & 19mm. How do i know what size the Majicycle used? Sorry im so new to this 😊
I think a thin jawed adjustable wrench would be a better value. Thin jawed because an adjustable wrench with a normal thickness would not be able to tighten the pedals if they loosen. And it should also work well on the nuts that hold the rear wheel. Keep in mind that this tool will be kept on the bike and used in a situation out on the road.
amzn.to/3GHmgbv
@@TinkeringTurtle thank you so much for your help. This tool will do all 3 wrench sizes in one, correct? Your awesome and thanks again.
And more, it’s adjustable by spinning the cork screw piece with your thumb.
nice video, would be better if you gave the price of the items as you show them
Prices and availability vary over time. You can get the current prices by visiting the links in the description.
Can the watts be upgraded from 750 to 1000w
I haven’t seen any settings that would specifically do that.
I need a new front tire skewer. Does anyone know the size?
amzn.to/3xwBydt
@@TinkeringTurtle I'm sorry that was what I asked but I actually meant for replacing out the quick release for something else if that's possible. But thanks for the videos you've been very informative!
You can still get the size from it. Good luck with your search!
some of your amazon links don't work
Thanks for the heads up!
I went thru and updated them this morning, should be good to go.
Does anyone know how to dismiss the throttle on these bikes?
Have you unplugged it?
@@TinkeringTurtle Many times and fitted a new controller
You need to use two types of alarms
I know your not stupid just saying bike alarms are nice and if you use say a disc brake alarm and a cheap alarm that goes under the seat that will work well with your locking system
Where I live I don’t feel the need personally, but there are areas that an alarm or two is a great idea.
Hey Turtle,
Need some help
What help can I offer?
BG music too loud, unnecessary, and distracting / annoying.
sorry
I was wondering the diameter (size) of the seat post. I ordered a Cloud C9 Select seat. The original seat wobbles even when the bracket is tightened. I am thinking of ordering a DJC Bike Suspension Seat Post shock absorber damper post from Amazon $33.90. It specified they need the correct size. Do you know the size for the cruiser.
Thanks
Phil
Hi Phillip, the seat post size on the cruiser and stepthru is 30.4mm. You can also buy a 27.2mm seat post and use a shim to bring it up to 30.4mm. That is what I did when I bought my Suntour suspension seat post. Good Luck!
@@TinkeringTurtle thank you appreciate your quick response. Have a great day 👍🏼