Bro, this video came in clutch! I had no idea about setting up the wiring for the LOC, every other person was connecting it to the head unit but I have a 2012 Audi S4 with MMI interface. Had no idea how to wire it up but this video helped so much because I’m running almost the exact same setup
Check out the speaker that sounds blown from the terminals, from the looks of the video, it looks like the left speaker is pushing, and the right speaker is pulling, on the terminal of the speakers make sure all speakers are connected correctly. The speakers should either be pulling together or pushing together, 🤔 I might be wrong and the speakers are probably wires correctly but, it doesn't hurt to check bro. 👍
It’s not blown on the back of your converter. There are two flathead screwdriver holes. You’ll stick your baby screwdriver in it and turn it left to right one is for your left speaker. One is for your Wright speaker. That’s why one of them was flexing in the other one wasn’t All you have to do is stick a screwdriver in there flat and tune it out on both at the same if you have one a quarter the way you turn the other one a quarter of the way don’t turn them all the way up or you’ll stretch your voice coils and tear shit up. Just wait till after you turn it on then mess with them, turn them out but know your subs are not blown or they wouldn’t be working right now Guys, you guys should know that all these people are comment that I read I can’t believe you guys would even say that if he had ran to the back of the CD player like you probably should’ve it wouldn’t they would just play you wouldn’t have to do all the extra tuning
Yellow is power, I hooked mine to the positive side of factory speaker. blue is remote, I also hooked it to the positive side of factory speaker and grounds aren't hooked to anything. Works fine for me
Can someone for the love of Christ tell me how to put in a LOC on a 2014 Nissan maxima with a factory Bose amp? Every video is a different freaking answer contradicting the last one…please damn it thank you…I have a Rockford Fosgate powered sub
Bro, this video came in clutch! I had no idea about setting up the wiring for the LOC, every other person was connecting it to the head unit but I have a 2012 Audi S4 with MMI interface. Had no idea how to wire it up but this video helped so much because I’m running almost the exact same setup
Check out the speaker that sounds blown from the terminals, from the looks of the video, it looks like the left speaker is pushing, and the right speaker is pulling, on the terminal of the speakers make sure all speakers are connected correctly. The speakers should either be pulling together or pushing together, 🤔 I might be wrong and the speakers are probably wires correctly but, it doesn't hurt to check bro. 👍
Definitely the issue
Will that work on any type of converters?? For any amaps to subs?
Thanks for this video I needed this today and it worked perfectly
great video! This is the video for LOC. You did it best
If you don’t know, learn. Blind can’t teach the blind
Good video. One for the new guys. About to try and wire my Acura tl sh awd 6 speed manual
Ima try this on my mercedes benz e350 sedan 4matic automatic
Followed damn near all your steps but the pac & amp is staying on after I turn off the truck . Any ideas why?
lol incredible sound
It’s not blown on the back of your converter. There are two flathead screwdriver holes. You’ll stick your baby screwdriver in it and turn it left to right one is for your left speaker. One is for your Wright speaker. That’s why one of them was flexing in the other one wasn’t All you have to do is stick a screwdriver in there flat and tune it out on both at the same if you have one a quarter the way you turn the other one a quarter of the way don’t turn them all the way up or you’ll stretch your voice coils and tear shit up. Just wait till after you turn it on then mess with them, turn them out but know your subs are not blown or they wouldn’t be working right now Guys, you guys should know that all these people are comment that I read I can’t believe you guys would even say that if he had ran to the back of the CD player like you probably should’ve it wouldn’t they would just play you wouldn’t have to do all the extra tuning
Hey. Can I use this adapter for active subwoofer alpine SWE-815? I dont have rca in my radio
I have a 2020 jeep compass latuide how will i do that with the wires
Where did you hook the yellow the blue and a black wire on the converter
Yellow is power, I hooked mine to the positive side of factory speaker. blue is remote, I also hooked it to the positive side of factory speaker and grounds aren't hooked to anything. Works fine for me
Where did u take the 12V+ to the remote from?
The amp power
I have a 2008 a6 with bose can i do this
So you don't use power or remote?
100 bucks & you still got ripped of lol dayum
Hooked up right just not tuned out
Don’t cut and splice your RCAs!!!
Can someone for the love of Christ tell me how to put in a LOC on a 2014 Nissan maxima with a factory Bose amp? Every video is a different freaking answer contradicting the last one…please damn it thank you…I have a Rockford Fosgate powered sub
U can fix the blown speaker
Now it’s blowed bc of runn it like that 2 long
You khmer?
Amp is under power
How?
Not blowed
Your Polarity is wrong.
How do you fix that?
Stop shaking the camera about the place it's so difficult to see what you are doing
Useless video.
Please dont do this the way he did!!
I love how every video I watch everyone has their own "easy" way to do it but it never seems to be consistent haha