I don't have my blue wire connected at all and it's still giving me the amp overload message. I suspect this message is some kind of general wiring error and not an actual overload of the internal amp. Kinda like when a program in windows pops up "program exe stopped working" and there's no info beyond that.
@@gilbertgarcia4303 I eventually found the reason. Turns out I was connecting my regular speakers to the RCA connectors which are meant to run through an amp. The manual was printed in such a way that the relevant info was on the rear side of all the diagrams page. I have a feeling the original manual was roadmap style and meant to be folded but then was revised to be book style. Once I fixed my wiring, everything worked fine and the error has not returned. Far as the parking break stuff goes, I didn't want to mess with any of my brake system out of caution of not wanting to mess up the thing I may need in an emergency. Connecting the wire to ground will register as "parked". I have this connected to a toggle on my dash so it isn't bypassed, just adapted. Same goes for the mute. Both can be run to a switch that grounds to the radio's metal chassis. Wiring the camera to be powered by the tail markers instead of reverse let's the driver monitor any load being carried. If I'm carrying a lawn mower in my Sedan, my bumper mounted camera supplements my otherwise blocked rear view. Wiring to the markers gives me peace of mind that I can be seen anytime my camera is powered and won't be powered if my car is off. I know I unloaded some mind-barf, but I feel like the safety options have room to improve and I did what I could to improve them.
@@rustyshackleford5166 on my speakers I still don’t have them connected and no rcas connected and still comes up. Whenever I hooked up the power and ground just to the harness it’ll still come up with nothing else connected to it. Sometimes I turn it off and on and it’ll work for 30 min max then the message comes up.
@@gilbertgarcia4303 Sounds like something is overheating then. If you have room in the radio bay and a few spare bucks for a PC fan, I'd say wire up a fan to help cool the radio. I didn't use a harness for my radio since it was hard to find. I used the service manual and a test lamp, wire stripping tool and some barrel plugs from a hobby shop to mate all the endings. I'd say double checking with your service manual to be sure the wiring harness isn't the issue. (Should be available online in PDF form)
Have you ever tried the trick where u hold the left bottom corner for 10 secs and then bottom right for 10aeconds? They say it works and no need for wiring changes
@@josephabaddi8226 didn't see the suggestions part. Try making a video on adding remote wire cutoff switch or adding led bass knobs. There wasn't many videos on the nvx brand led voltmeter bass knobs
Weird how I don’t have subs and just a stock amp with stock speakers and I still got the message
Same
@@colbyreaume8416 same did you do anything to fix it? I have no subs and just stock amp
Same !! Shit plays no sound but works and everything
Thank you for this video! Helped me fix my issue at the very end.
I don't have my blue wire connected at all and it's still giving me the amp overload message.
I suspect this message is some kind of general wiring error and not an actual overload of the internal amp.
Kinda like when a program in windows pops up "program exe stopped working" and there's no info beyond that.
I have my wiring wired correctly and still have that message too, remote wire not connected to anything
@@gilbertgarcia4303 I eventually found the reason. Turns out I was connecting my regular speakers to the RCA connectors which are meant to run through an amp.
The manual was printed in such a way that the relevant info was on the rear side of all the diagrams page. I have a feeling the original manual was roadmap style and meant to be folded but then was revised to be book style.
Once I fixed my wiring, everything worked fine and the error has not returned.
Far as the parking break stuff goes, I didn't want to mess with any of my brake system out of caution of not wanting to mess up the thing I may need in an emergency.
Connecting the wire to ground will register as "parked". I have this connected to a toggle on my dash so it isn't bypassed, just adapted. Same goes for the mute. Both can be run to a switch that grounds to the radio's metal chassis.
Wiring the camera to be powered by the tail markers instead of reverse let's the driver monitor any load being carried. If I'm carrying a lawn mower in my Sedan, my bumper mounted camera supplements my otherwise blocked rear view.
Wiring to the markers gives me peace of mind that I can be seen anytime my camera is powered and won't be powered if my car is off.
I know I unloaded some mind-barf, but I feel like the safety options have room to improve and I did what I could to improve them.
@@rustyshackleford5166 on my speakers I still don’t have them connected and no rcas connected and still comes up. Whenever I hooked up the power and ground just to the harness it’ll still come up with nothing else connected to it. Sometimes I turn it off and on and it’ll work for 30 min max then the message comes up.
@@gilbertgarcia4303 Sounds like something is overheating then. If you have room in the radio bay and a few spare bucks for a PC fan, I'd say wire up a fan to help cool the radio.
I didn't use a harness for my radio since it was hard to find. I used the service manual and a test lamp, wire stripping tool and some barrel plugs from a hobby shop to mate all the endings.
I'd say double checking with your service manual to be sure the wiring harness isn't the issue. (Should be available online in PDF form)
What kind of relay do I need?
Great info. Thnx!
Not even using the blue white wire and im getting thus message
i have after market subs and a 500w amp connected and it gave me this message, will i have to take out the stereo and fix this?
Have you ever tried the trick where u hold the left bottom corner for 10 secs and then bottom right for 10aeconds? They say it works and no need for wiring changes
Does only pioneer do this that often?
how about AMP ERROR message?
I have a pioneer dmh-160bt and it’s showing the white screen. Can this be repaired?
Maaaan mine to or the pioneer logo with dots all over or just blank screen ..some times it’s happens not always
How did u okay videos was it on a usb stick or can I mirror ur phone like TH-cam and so on
i have a da360dab the sub out is not working sub only works wens it plugged into the rear out? is the sub out faulty?
My pioneer stereo keep saying turn off the power amplifier IC? What does that mean?
My friends is doin the same thing ..I'm thinkin the remote wire but idk
Can you link the more expensive bypass? Thank you fit this video
www.ebay.com/itm/281345136450
@@AcuraAudioGarage thank you so much!
The Pioneer DMH-2660NEX is not listed as compatible head unit in the description. Do you have any other suggestions? Thank you!
@@josephabaddi8226 didn't see the suggestions part. Try making a video on adding remote wire cutoff switch or adding led bass knobs. There wasn't many videos on the nvx brand led voltmeter bass knobs
Can u mirror off iPhone ?
Do you have anything for a 2013 TL advantage audio
Does it have the ELS system?
Where did you buy the switch at?
amazon basic switch