Fixing up the Bobcat 751 skid steer - (part2)
ฝัง
- เผยแพร่เมื่อ 3 ก.ค. 2024
- Second part of the bobcat 751 fixes
Table of content
00:00 Intro
01:23 Temp gauge problems
11:50 Temp sensor & thermostat
26:19 Fixing the muffler
54:05 Fuel gauge
58:07 Rear lights swap
01:12:26 New horn
01:15:25 Fixing glow plugs
01:36:55 Fuel gauge (continued)
01:40:07 Rear lights (continued)
01:45:09 Master switch install
Referenced videos:
1) part 1 - • Fixing up the Bobcat 7...
Thanks for watching
Want the support the channel? Consider leaving a like/comment or subscribe, also there are the SuperThanks, Patreon or PayPal options available.
Patreon (Upcoming projects and insight) - / antspants
My PayPal Link: paypal.me/AndrisArike?country...
Supermom PayPal Link: paypal.me/MeeliArike?country....
Want to send me something? - contact me via e-mail: theevilchicken@windowslive.com
Feel free to also follow me on Instagram - / ants__pants - แนวปฏิบัติและการใช้ชีวิต
Your dry humor kills me every time.
You have that bran new free welder that has tig. An you have the mixed gas an sure you have some old wire coat hangers. That what you should have used to patch the muffler. That what tig is for.. not a dam cheap mig
Ya, he has me rolling on the floor every YT!
Need pure argon for tig. Co2 will corrode the weld and mess up the tungsten tip
I really hate to laugh at somebody's discomfort but the moment when you honk the horn in your ear make me laugh until I cried.
I laughed, too. LMAO. The cat just wondered where the sound came from.
that was such a comedic mishap :D
Another great video little bit of humor a bit of excitement blowing up the glow plug and some MacGyver MacGyver's fixing up the muffler all in all great video and entertaining keep them videos coming great job
Haha
I played it back about six times!!! The look on his face was hilarious :)
2 hours? where's the concession stand for the popcorn!! lol
Lol
for the price of admission you are required to bring your own. !!!
Working glow plugs are going to change your world..LOL
Yup
A 2 hour video on the white hobo? It must be Christmas, I’m excited to watch this video when I get home from work!
why did i read that with antspants voice? 🤨
Awkwardly good
Andris attitude towards fixing , renovating , organising his property , buying stuff , gives everyone a lesson on how to cope . The gentlman is a great example of how a mixture of humour and unemotional condemnation of products brings a cheefulness otherwise never before witnessed anywhere on youtube . i.e. makes you want yo go to Estonia and live next door to Andris . He's a real funny guy , and down to earth , if the world was full of Andrises , what a wonderfull world it would be
Thanks dude
EXACTLY!!
Can’t wait for Episode 3!!!!!!! Definitely need to get that workshop expansion project going!!!!🔥🔥🔥🔥🔥🔥🔥
well I had my sauna, kid is sleeping, I opened my beer and felt something is still missing,until I refeshed my YT feed, Im glad I bought a sixpack ;D
Lol
The windscreen washer button gave me a good laugh.
😆
Perhaps its a 'special' eye-wash function!?
Did he say “Dios Mio” at 46:50?….I laughed my ass off…..love this channel!
😅
"I need to stop being curious..." Proceeds to disassemble the muffler. I love it!!
Lol
Just watched your cabin video's back to back. I have a broken leg and need to rest it i laughed so much at your dry humor i needed to pee i will move on to your random stuff videos next.
I once came for the cabin, have no affiliations with heavy machinery but never left this channel =D
😂
You take the red handle off of the battery disconnect switch and mount it from behind. Then you only need a small round hole between the screw holes. And you can get the correct crimping tool for the large gauge ring terminal for like 30 to 50 euros. Instead of squishing it in the vise and having the cable leaving the premises. :)
Halfway through this episode and Master Blaster is firing on all cylinders. 👍
Haha
Let the weekend commence! Andris is ON!!! Take care & stay safe. Hiya Super Mum & family.
Thank you! You too!
You mean when Andrew used a chainsaw to install a radio in his truck? ..... I'm going to watch the rest of your two hour video now. Thanks for the content. It's greatly appreciated. ......
By the way, We got a 4.8 Magnitude Earthquake here in New York City and I'm still watching your video. I'll check out the News later
Yeah i saw. A traffic cone fell over
At least the Muffler came apart easy enough.
I now know more about a bobcat than I ever thought I would (or wanted to).🤣Guess I'll have to get one now. Expanding the workshop!!!! This could get dangerous! I'm all for it!😁
Lol
28:30 Some predictable Estonian cursing 😂😂😂
Obviously 😅
"You know, I should probably stop being curious." Pmsl. 😂😂
Yes 😅
@@Ants_Pants 🤣😂🤣😂
Make the workshop bigger! 😃 love these long movies, make as many episodes as you want! love to see you work / struggle 😂
Will do!
Thank hobo it's Friday
Brilliant video endless humour and work that never ends. Have a great weekend Andris
Same to you
2 hrs you spoil us Andris. Always look forward to Fridays nights with Mr Ants Pants love your scene of humour :)
😇
Sometimes I dream of leaving my office job, packing my bags, and flying to Estonia to lend you a hand. I'm not a mechanic or a builder, but your lifestyle inspires me a lot and I would like to give it a try. I think it's a beautiful thing; indirectly, you're broadening the horizons of many people, pushing them out of their comfort zone.
😅👍
I bet Ants could build a fully functional set of tracks & replace the wheels on that Bobcat. I wish the lads that invented the Arc Droid sent him one, the things he could invent & build would be unlimited. Luv the videos your humour & inventiveness never fails to amaze me, proper Red Neck Engineering .
Will do
Andrew is now my nr 2 choice after this video. love you Ant
😇
That thing was like an apartment building... ( thermostat housing ) 😂😂😂 my coffee came out of my nose!
Oh no! Anyway 😂
You can start a new business: Bobcat electrical service😂
Haha i would go bankrupt
Only man on TH-cam that makes me laugh every damn video. 😂
Whoops
Bless you when you sneezed. 🙃
😅
Frankenstein muffler! Awesome! Great job Andris!!!
😆
The white ones are your light.. The red ones are your reflexes.. :D
Close enough 😂
Gee Andris! If I pull everything apart, I won’t be able to put it back together….you’ve got guts Man!
😅
"How many issues does the bobcat have?" Yes.
There isn't a long enough list, just the word Bobcat would be a good place to start. 😂😂
All of them,famous words by that Canadian peg-leg!!!
Cant beat an ants pants video
I don't know about anyone else but that Vevor diesel heater noise would drive me crazy. 😮 But A. P. Your videos are amazing.
I hardly even notice it. But on videos it is in the foreground
Kudos to you for having the perseverance to tackle the wiring mess, I don't think I would have had the patience to do it. Love the videos man.👍
Thanks 👍
Great episode Andris. I love following your journey…as much as I love to follow F1, NHL, NFL, MLB. Just another way to say your videos are in good company.
I appreciate that!
thank you for the two-hour video!!!
The funniest shit is when you try to flip them glasses up in the beginning, laughed my ass off👍🏼👍🏼
Things broke
I would vote for the workshop expansion project 😊
Yeeeesssss, two hour video💪😊
Thanks Andris!
And have a nice weekend.
You too!
Ants, your channel is now way ahead of Camarata
Thanks for your view 😇👍
Andris "I should stop being curious"
TH-cam viewers "Noooooooo! keep being curious" 😛😛
Yes boss 👍
The long videos are the best and a third video is just fine. You have one of the best channels.
The white connectors in the switch panel are designed to connect directly to the back of the switch, explains the broken pin stuck in the connector.
The new lights need a “wedge” style globe base that will twist in, could be a T15 or T20 hard to judge the size from the video.
There might not be any short in the wiring to the light, as you tested it with globe’s installed you will get continuity from the power side to ground through the bulb.
Ok
If you haven't already, remove the bulbs from the reverse lights and retest. An incandescent bulb is a controlled short circuit. Hopefully, you can use the existing wiring. Great video as usual!
Good tip!
I had a good laughs at your antics on this video but you got there in the end as usual well done Ant.
Thanks 👍
Almost dies from glow plug testing - "This was fun, lets do it again"😂
😂
We have waited for two days to watch this video and Andris you have not disappointed, we enjoy your videos so much you get a special time where we both can watch you. When you are done with the bobcat you’re going to feel very accomplished and enjoy using it with operating gages,lights,etc. The bobcat is going to run so much better. I can imagine how long it takes to make these repairs and videoing it then editing the video’s. As viewers we want to say thank you for all of your time and that we appreciate your hard work for us and how enjoyable you are. Had to chuckle when you installed the horn lol. Have a great weekend and week. Wishing you the best always. 😊
Thanks a bunch. Comments like these make me happy
Again Andris hits it out of the park. Great video I could watch his videos every day even if they are 3 hours long the more and longer the better, man!!!!!
Lol 😅 gotta get back to work
Outstanding job on the muffler. Saved some good money you can use for other projects and videos. Love your videos.
Thanks 👍
Hello from the Netherlands.
thanks for the video Andris .
Kind regards, Hollandduck
Hey again
@@Ants_Pants hello Andris 👋
Got alot done ants,isnt it rewarding to finally exhale and look back at handywork from a finished view.we all feel ur pain on wiring jobs we curse engineers who never work on there own creations.bravo young man ur a trooper.!!!snookie pa.😊😊😊
😇
Love the glow plug job. Great that the fuel gauge worked.. Looking forward to the next episode, whenever that is. :P
Hopefully soon
Ces bon , means it’s good in French my friend! 👌🏻👍🏻👍🏻 Here in Louisiana the old people talked Cajun French, it’s like a slang French from France! If you know what I mean, my dad never taught us the language! I just know some words,Andris! I like when you’re speaking your language, even though I don’t understand what you’re saying! You’re always hilarious brother, I’m usually laughing my butt off! 🤣😂🤣
Think its good that you dont understand 😂
Certified Bobcat repairman
Soon
On the next episode of Ants Pants our favorite creator starts rewiring his troublesome Bobcat........
😂 hell NO
Unexpected stuff always shows up when you're working on something
Friday is saved
Lol
37:28 😂😂😂 yes, safety first!
Lol I love every second of your videos. It's pretty awesome mix with good knowledge, hard work, nice big machines and fun.
Glad you like them!
Doing some popcorn and watching now
Note to self: NEVER watch Andris do his thing while the rest of the family is sleeping!
I busted out laughing so hard I woke three of the five of us up @5 am! Thank you for being you brother, I haven’t laughed this hard in a long long time. You crack me up! 🤣🤣🤣
I’m loving the extra long vids too, please keep’em coming! 😉✌🏼
😂👍
Nice low key shoutout to Camarata. Thanks for the upload.
You bet
Mine is a 763 and it does not have a battery disconnect switch. Great videos, one of my new favorite channels!
Yeah, those dont come equipped with one from factory. Previous owner had put a master switch to mine 2001 753g. It's handy to know that power is really off from everything.
Thanks for confirming
The reason why disconnecting the negative is better, is that creating a short is a lot les likely.
When you disconnect the positive, you can still quite easily create a short between the positive section between the battery and the master switch, and anywhere on the frame/body. If you disconnect the negative, the only way you can short anything is between the positive and negative section between the battery and the master switch.
So yes, disconnecting the negative is objectively better. People who say you should disconnect the positive simply don't understand DC automotive wiring. They may think it's like normal house wiring, where you should disconnect the phase (/positive), but it's not. Functionally it doesn't matter though.
Thanks for this
Have a nice relaxing weekend 😇👍👍👍👍👍🙏 Novēlu jums jauku un relaksējošu nedēļas nogali
😇
Sounds like a bad ground. Common ground for the cluster. ❤
What a binge-watch, nice one
Yesssss I woke up and HERE HE IS! Much luv, Ants Pants!🥰
Hey
I really like the longer videos.
51:00 Maybe evaporating coolant spill from earlier :-D
Yup 😅
Work shop expansion, definitely. Another great video..😜👍
Ants my man, you always make my day with your humor & vids! Keep them coming bro.
Fantastic video andris, you have me in stitches as usual ,you need to watch jesse muller ripping apart his JCB skidsteer ,its covered in more crap than you can believe, love you man
Crap you say? I'm in
Man if I wasn't a continent and an ocean away I would come and help you with the wiring. I too love complaining about people's half assed repairs.
I would consider getting one of these "2 Wire Retractable Test Leads with Alligator Clips 18 AWG Test Leads Alligator Clips Electrical Test Leads Retractable Test Leads 20 FT" as described on amazon. Harbor freight had them for a while and they are amazing for extending your test leads.
I was removing the highscooler stereo "upgrade" wiring in a little pickup today. Between that and this it reminded me that I need to get my backhoe gauges working again. They have only not worked since 1996. So should be easy to fix.
Yes! Gotta watch my shows.
Thank you Ants Pants person.
No prob
Its great that you're curious...ive always wanted to see the inside of a bobcat muffler!!!😂😂😂
😁
Temperature gauge looked like it was the sensor. The exhaust repair cost you some wire, gas and electricity, and will last a long time win-win. For someone who does not know or like electrics (your words) I think you made a very good job of repairing all the electrical problems. The bobcat is made in America? Is that why your spanners won’t fit! I think the only thing metric on the bobcat is the driver 😊 Another excellent video, keep on posting.
😂😂😂😂 yup seems about right
Your a treat to watch can't wait for that new one
Wowsers, at the start with the dark Goggles, you looked like Dr. Nefario !! Awesome
😁
You made a holy muffler into an un holy one😂
Haha
ça marche ! we say in french ! Don't be me guys !!!! ahahahaha I really love your videos, your work and your personnage !! My best channel ever (work, geek, funny, ......)
Wow, thank you!
Take as long as you like I love these two hour movies once a week
All Hail "Ants Pants" 🙌🙌
When you pressed the horn button, I nearly fell off my chair at the same time I was watching you one of the ships in my local port let off their horn at the same time, it was like being immersed into the world off Ants. I'm sure manufacturers just make things complicated for their own enjoyment, just to see people's faces when they attempt to fix something. 😎👍Yay a third part.
Ohh 😂
Next time,just use a car muffler,they are cheap,there are plenty of shapes to suit your needs,and you have universal flexpipes, V bands and all you want to have a good muffler.
The bobcat output is way lower than any low power car ,so you can use basically every model you want.
I'm currently installing a OEM stock motorcycle muffler on a car,it's made of stainless steel and aluminium,sometimes they are even made of titanium,but people want to make noise so they sell those for cheap.
Ah yes
I love it when you talking about C4. I mean the military stuff. I'm veteran US Marine SC and i worked with lot of explosives. I love it.....
Send me some bro
As someone learning Estonian, when you talk to your kids I can sorta, sometimes, figure out what you’re saying.
Ohh cool
Your a very handy person try fix anything
Put index tabs with labels on the pages that refer only to Your Hobo. The Other Hobos are on their own. On the pages that have Your Hobo data/info mixed in with The Other Hobos -- use a highlighter pen on the sentences/data that refer only to Your Hobo. I do that with my car and motorcycle manuals. I'm too easily distracted anc confused as it is. I need no help with that. I also keep a magnifying glass with the manuals because you know, To See Crap With. Love your channel.
👍
Bless you
Good job as always!😊
Excellent as always. Thank you.
Keep up the good work Ant.
Always entertaining to watch.
When testing gauges, ground out the power wire at the sending unit for the gauge you are working on.
If gauge goes to full, gauge is good, if not either wire issues or sending unit is bad.
Goes for most analog type gauges.
Awesome video by the way as usual
Ok thanks
nice video
good stuff thanks
So I finished my Steak and homemade fries and unpasteurized honey and carrots somewhere in the first hour. And I kept my pants on. Cheers on another funny great vid
Keep your pants on bro 😅