LaTrax Teton BRUSHLESS UPGRADE Tutorial
ฝัง
- เผยแพร่เมื่อ 12 ก.ค. 2023
- We're upgrading a stock LaTrax Teton from brushed to brushless!
Visit www.thobbies.com/products/tra... for the upgraded parts!
Tony's Hobbies - The Hobby Superstore!
925 Baldwin Park Blvd.
Baldwin Park, CA 91706
Phone: (626) 337-3000
Email: info@thobbies.com
Website: thobbies.com
Store Hours:**
Mon-Fr 11:00am-6:00pm
Sat 11:00am-5:00pm
Sun 11:00am-5:00pm
Our store is closed New Years Day, Memorial Day, July 4th, Labor Day, Thanksgiving, and Christmas.
Track is now OPEN, learn more here www.thobbies.com/pages/about-us
This video was super informative and to the point. Love it
I put in the same system and already had the programming card. Shimmed the differentials, put in thick, grade 3 open gear grease with moly, latrax 14t pinion with steel Hot Racing 60t spur, hobbypark aluminum center brace, steering assembly and shocks with RPM arms. I put in a regular, more waterproof Traxxas receiver box with a Spektrum 3 channel receiver bound to a DX5C transmitter. Oh, and went with a metal geared servo. A Power HD. Make sure to set the LVC for this little ESC to 3.4v to protect your lipos. It's the 6th option. I went with 2s for reliability.
As for the rest, I'll wait for things to beak before considering any more upgrades. In the middle of glueing the tires. My glued tires always fall apart, so fingwrs crossed. 🤞
4:26 helped me out bought my esc like a 7 months ago for my 1/16 erevo esc burned out bought exact same one calibrated like ur vid and dammmmmmmmmm way faster and it’s on 2s lol dammm thanks bro subed
Thank you the video
Nice! Thx for that video!
Wooooow
You mentioned about changing the connector of the ESC, did you use the one from the stock ESC or did you buy a compatible connector?
We removed the connector from the Hobbywing ESC and soldered in a new Traxxas male connector (TRA3070X). If you do this it's vital your solder joints are electrically and mechanically sound, if the joints are bad the wire can heat up and even catch fire so its recommended you take it to a hobby shop if your not confidant you can do it.
Have you had diff issues since going brushless it chews diffs
Is it safe to use a 60t spur gear with 0.8 module ? (Not 0.5)
How much the upgrades cost and can i have the name of the upgrades pieces?
If you look up LaTrax Teton RTR on our website, thobbies.com, most of the products can be found below the description in the upgrades section.
Did you swap the connector from the old ESC or where did you source it? Thanks.
We used a new connector to minimize the amount of solder joints. You can find them on our website, thobbies.com
What pinion gear did you buy and where do I get it
Its a 15-tooth pinion gear. Part number is 7039 and its available on our website thobbies.com