PELICAN BASS RAIDER 10e MODIFICATIONS Overview {Bass Catching Machine}
ฝัง
- เผยแพร่เมื่อ 12 ธ.ค. 2019
- This is a very customizable and fun boat to have. This video goes over the mods that I've done to this boat to make it a bass catching machine. Watch and see MUST HAVE modifications as well as cool fun mods that make a long fishing day comfortable and efficient. The mods included are boat flooring, rod holders, upgraded seats, gore camera pole, boat paddle as well as equipment used on the boat.
Tap that like button and subscribe to our channel to stay up to date for future videos
Check us out on Instagram: / bass_brothers_fishing
Floor Mat: amzn.to/3ac6WDc
Seats: amzn.to/2Zoa0rY
Marine Battery: www.walmart.com/ip/EverStart-...
Gramin Striker 4 Plus Fish Finder: amzn.to/2U7MDRI
Minn Kota Endura Max 55lb. Trolling Motor: amzn.to/2Uvhtm2
Paddle (4ft): amzn.to/2J88mCE
Velcro for Paddle: amzn.to/2QBUuVj
Anchor: amzn.to/33AAXdo
Battery Charger (New Model): amzn.to/2Urg93P
PVC Camera Pole: 1-1/2-IN X 5-FT SCH40 PIPE
Date Filmed: December 13, 2019
#bassbrothersfishingdmv #pelicanbassraider #pelicanbassraidermodifications - กีฬา
Great boat mods. I like the floor your put in yours. We are having some issues with ours moving around on us. Thanks for the shout out on the rod holders. Have a great season. Fish on!
Thanks Vance. It's a nice floor. Comfortable enough to fish bare foot. One thing though is the mat at the back of the boat can blow out if windy while your driving so I normally put the one in the car lol... You guys motivated me to do mods on the bass raider. So thank you!!! Stay safe out there.
Which sealant did you use to protect the wood? Based on your advice, I am using one piece of plywood, 11/32, BCX. I ripped the width to 20&1/2 inches. The length is 96 inches. Now, I need to treat the plywood. Thanks in advance. I really enjoy your videos.
Nice job! Thank you!
Great video and extremely nice build on this boat! I’m restoring a 2013 I bought new. It’s sat for quite a while, so it’s good to see your boat for some new ideas.
Another outstanding video. Thanks!! Really helpful.
Thanks
Wow…I’m doing my very first (somewhat) deep dive into getting something for pond fishing. This vid was perfect.
Awesome info.
Thanks.
~RESPECT~
Thanks. This is an awesome little boat
Great video!!! I just bought a pelican bass raider 10e from academy. Thank you for the mods !!!
Thanks Rory. It's a great boat. Enjoy your new toy 😉🚤🚣♂️🎣🐟💯
Great vid, excellent advice on the Oars it’s a must, I’m buying another one so I have 2.
Oh yean man that Oar has saved us a couple times :). I prob should buy another one too!!!
Thank you for doing this informative video
Thanks Billy for watching and leaving a comment.
Thank you. Great information
Thanks.
Nice boat, Sir. I have that same model. You just can't beat these Pelican's. Tight lines!
And they cost much less than a good kayak. Bang for the buck is awesome. Tight lines. 🎣🎣🐟🐟🚣♂️🚣♂️
Excellent mods. I just got the 10e and am looking forward to these upgrades/mods. Just finished the floor and picked up a scupper drain yesterday, that's next. I really appreciate you listing the parts and sources you used, saved me much time. Thanks again!
No prob. 👊🏾
Just got one for Father's day ordered some stuff already on the way thanks for you videos it helps me out so much 👌
That's excellent Rob. Man, that's the prefect Father's Day gift. My wife bought me mine. Best gift she ever gave me :). Enjoy it and be safe out there.
I have the Pelican Bass Raider 8, Just upgraded to the Bass Raider 10E. Looking forward to getting this boat on the water, catching some bass, and also making some of your mods. Thanks for sharing. Good luck on the water.
Congrats on your new Bass Raider James. Enjoy the mods and the season. stay safe out there.
Great video. Nice garage setup you have as well. I have the same mods for my 10e. I have also drilled holes on the top of the side decks for rod holders. Doesn't leak and works great.
Thanks George. I think it's just a matter of time before I drill holes in the boat for future mods. Thanks for sharing.
Absolutely love this video! I been considering getting one as well in the near future and it's always nice to see how other Pelican owners rig their boats. Once I get one, I plan on having a stern mount trolling motor with a fishfinder/gps and with a nice floor board like you have!
Excellent Gian. You won't be disappointed.
Nice job
That a cool little boat if your stuck fishing from the bank like I am that's a good way to get out there and target the fish that you are missing enjoyed the video keep the vids coming tight lines man 👍😁
Absolutely. This is a very affordable way to get out and costs way less than a good fishing kayak. Thanks for watching and leaving us a comment.
Thanks for sharing.
No problem. Thanks for watching.
Here I am commenting on a 2 1/2 yr old video because the creator commented on my question in a Facebook group today. Glad he did and for watching this!! Love the included links as I was wondering today where/what to do with the paddle. Great timing universe!
Awesome man!!!
Good stuff.
Thanks.
Such a cool little boat. I am picking one up this weekend and doing many of the mods you have. I want to add a power pole micro as well.
Ah man. Very cool. You'll love this boat. I cant stop stressing how great of a boat this is. Enjoy the mods and getting out on the water in 2020.
Great Video ! I just got my Radier 10E
I am going to use a couple of your mods !
AWESOME!!! Congrats on your new boat.
@@BassBrothersFishingDMV No , Thank you, some great ideas !!!!!!
Thanks
Thanks I need the info for the water plug I have a tracker pelican pond prowler I like the idea of the drain plug planning to do one on boat 😉
Like your pelican, just got one from bass pro. Did some modifications as well. Going to hit kent island this week.
It's a great little boat.
I just ran into your channel. Great vids on the boat mods and you guys are fishing fools! You're slaying those fish.
Here's an idea for the plywood deck. This will work if it's 1/2", which it looked like (not 1/4"). Not sure if we can post a link here, so go to Home Depot's site and plug in 7/16 in galvanized panel sheathing clip. You might be able to buy to buy them loose or maybe at an Ace. Or if you know guys that build houses...
Keep 'em coming.
Awesome thank you!
Nice vid, like the mods. Have to love the Pelican Bass Raider.
Absolutely Sir. It's a really cool boat. Thanks for watching and subbing.
@@BassBrothersFishingDMV Very cool boat. As you mentioned in the vid, we do our mods on our channel as well, Fishing With Vance. I'm working on my bass raider 8E currently. Lots of fun to mod!
@@mikemiller163 cool. You guys inspired me with modding the boat. Sub'd to your channel. Im a fishing with Vance supporter 👍🏾💯
@@BassBrothersFishingDMV Thanks bud. Here in Pa still cold enough no fishing(at least how we do) and we are itchin to get out there. Hopefully in a couple weeks the bass raider will be cruising across the water. Fish on!
@@mikemiller163 same here. MD is also tough in the winter. My last catch was in November lol. I'm dying. Spring is on the horizon though.
Thanks for all info. I'm looking forward to getting one soon I hope. The price is right, but I guess everyone is getting one, or they have slowed production. 2020 has really been odd! Going to go watch your other videos now.
Production probably slowed down with COVID.
I like I like that you kept it very nice and simple nice mods how about making a video you doing some fishing
Thanks Daniel. Check out the other videos on this channel. Most of them is fishing from this boat. Thanks for watching.
Very good mods👍🏼
Thanks Bill of Rights. You are one of the people who inspired me to mod this boat. Do you still have your Pelican Bass Raider?
I sold it to fund a job boat modification. Sometimes I miss it.
@@borfishing7690 I hear you loud and clear. I'll be checking out your Jon Boat Mods.
Good job! I'm considering a purchase but but am leary about stability and balance issues! Can you enlighten me? Thanks!
What kind of
Velcro did you use for the oar
God information, I'll be purchasing the Pelican very soon. My question is: Why not treated plywood?
Just got a pelican bass boat and I’m so anxious to try it out. Im in the DMV, Im a fishin deva. Just put rod holder’s and lights on my boat
Congrats on your new Bass Raider. Where in the DMV do you fish?
You indicated that the back rod holders are 2" PVC with a 3" Reducer. Just want to double check that as the main pvc doesn't look quite that large from the video. Thanks very much for sharing your mods and the products you use. Just bought my 10E and am hoping to make many of the same mods!
Steve.... good eye. I just re-measured it and the main pipe in 1-1/2" not 2". The reducer is 1-1/2" x 3" thanks for catching that. I'll update it in my description. Congrats on the boat. It's such a fun boat to fish from. Enjoy and be safe out there.
Do you need to register that boat? I’m also in Maryland and only plan to use a trolling motor
Great video. Where/how did you mount your transducer? I see it on your trolling motor? I'm contemplating buying one of those Scotty mounts but would like to avoid drilling holes in the boat.
I used hose clamps to mount it on the trolling motor. I too didn't want to put holes in the boat
Thanks for the video. Where did you put the transducer?
Installed it on the trolling motor using hose clamps. This way I didn't have to put any holes in the boat. 😃👍🏾
Cool mods! I’m thinking of getting a little boat like that to use in smaller lakes and ponds. I really like all the mods you can do to make them fit your style of fishing. The GoPro mount setups are pretty sweet too. If I get one, I’ll probably add a pushpole as well for shallow water areas.
Did you do anything to help protect the hull? I saw on BassGeek’s channel that he coated the pontoons to prevent wear.
Hey Tim. Thanks for watching and leaving a comment. It's a great little boat. I didn't but that's probably not a bad idea. I try not to drag it or crash into things too much to wear the bottom out.
I followed your lead and added a 11/32 plywood floor which I protected with spar varnish. I then added glued down marine carpet. I get a little spongy feel when standing up and moving around. Was wondering if you experienced the same with your 1/4 inch plywood. Really enjoy your videos.
That's NOT 1/4" it's 1/2"!
Any problems with the anchor being clipped to the handle yet?
Nice video. I heard that it can be a pain when you have to drain it when water gets in. Do you find that your having to drain it a lot? Have you considered a casting deck or do you find the boats floor height good enough to not needing one?
Thanks Shane. It is a pain to drain it when water collects in it. It doesn't happen allot but it all depends on how you store your boat and how bad the rain storm was. I'm planning to put a scupper drain in it soon. I'll put a video out when I do it. I also show myself having to drain it SMH. Casting deck would be nice. Probably do one over the winter or in the fall. IT's not needed but may be nice to have. Stay tuned.I'll do a review of that as well.
I have the SunDolphin 10e version, basically same thing but I can assure you have a paddle on the boat is huge. I have the 30lb thrust minn kota and it will run your battery dry (and I have the same battery as you) in 5hrs of run time. If you have 2 people on the boat you're lucky to get 4hrs, assuming you're traveling from the dock to your fishing locations a little down the water. I'm seriously considering the 5hp motor for mine. I fish on little seneca a lot too (I'll holla at ya if I see you) and you know from the dock to those good spots you can run the battery pretty dry.
We've run on Seneca lake for 10 hours with one battery. It all depends how much you stay on the motor. Is the Sun Dolphin rated for a 5hp outboard motor? The bass raider is only rated for a 3.5hp.
@@BassBrothersFishingDMV yea it's virtually the same design. the wind really affects it, upgrading to a 55lb minn kota this spring, that should be more efficient. See ya on the water!
What about an anchor trolly like they have on kayaks so you can adjust ur anchor point on the fly to adjust for wind or current and keeps ur boat in perfect position, u still only need 1 anchor. I have a sundolphin sportsman 8' (lil brother of this) and it works fantastic for Pike fishing in Alaska.
That's a great idea. May need to look into that. I may need to downsize my ass anchor though. I use a 15lb pound anchor and it does pretty good holding the boat still with two people in it. What do you use?
Show a vid of your floor install please
I know you are trying to keep it cheap but since you are using electric troller I highly highly recommend getting a Dakota 54 AH battery, they're freaking AWESOME, 20 lbs, last all day, super fast recharge, long long life with 11 year warranty with charger included. They cost like $500 but wholly hell you can go all day.
So trye. Litgium is my next move for the bass raider.
This might be a dumb question but does the trolling motor go on the front or the back of the Pelican boat?
You can put it in the front or back depending on the trolling motor you have
Great video! I just grabbed the exact same gym floors, I found mine at Home Depot while looking for work supplies…how are they holding up?
They are intended for interior use but for 10$ I said I’m sure it will be fine 😂
Love the channel bro!
Not sure about the home depot ones but mine are holding up great. 100 % satisfied. I've gotten them wet multiple times and they dry off nicely if you leave them outside or out in the sun. I've replaced some of them only because they flew out the boat while trailering the boat lol.
Great video I was able to get a lot of good info for mods. On your trolling motor which length of the shaft do you recommend between the 36” or the 42”? Thank you in advance for any response.
@Lucky Cg. I recommend the 42" which is what I use. This works great for sitting and standing fishing. 36" would be too short for me standing at 6' 1"
@@BassBrothersFishingDMV Thanks
Well, you've answered my questions previously asked on first video I saw. I'd like to know where you place your transducer for the fish finder, the angle most likely downward, but, thinking boat drag when loading?
Being that the mat is removable, how do you transport? Thanks brother!
The transducer is mounted to the trolling motor. I haven't had any problems dragging it on the bottom. Its protected by the rudder on the trolling motor. I transport the boat with the mat in the boat. Sometime I'll take out the last piece of the mat if it's a really windy day just to make sure it doesn't blow out while driving. Another thing I do is lay the trolling motor in the boat while transporting. That ensures that mat doesn't fly out while driving as well. Note: I anchor the trolling motor in the boat with cord that connects to the front handles of the boat just as an extra measure. The seats also protect the trolling motor from flying out the bat :).
@@BassBrothersFishingDMV Thank you
I have one of these Bass Raiders not where i can measure the inside but i`m sure it is longer than 8 ft. if i`m not wrong that`s the longest of plywood comes is 8 ft. Definitely need a Paddle . I use a Solar Panel on mine but i don`t fish 12 or 14 hr. . i like your front rope hookup
Thanks Chuck.
Your wood floor looks thicker an quarter inch.Are you sure ? Do you leave the paddle on the side of the boat while trailing ? What brand trailer ? Thanks
I actually think it might be 3/4 inch. I leave the paddle on the side 24/7 even trailering it. the velcro is very strong and my straps hold it down too. it's a trailer from northern tool. I did a vid on the just the trailer on the channel.
Any chance you have the dimensions for the wood floor? Great boat, thank you for sharing!
Sure. Total length is 8 feet long × 19.5 inches wide. I cut the board into two 4 foot pieces on mine. The idea of having two 4 foot pieces is for ease of moving it in and out of the boat without removing the seats but it really doesn't matter. I will probably try one 8ft piece once it's time to put new boards in.
Great video homie,
Good job with mods. If you haven't done so, check out Lithium iron phosphate 12v batteries, they're much more powerful, last way longer, charge much faster, they can be used down to below 90% of battery power. Lead acid is only dafely usable to about 60 % of its rating, go below that and you will do permanent damage. It will only last about 2-3 years. The lithium can be purchased in any amp hr configuration to suit your needs. The biggest pro is weight, my Renogy lifep04 100AH battery weighs 29 lbs. The initial cost is high, I paid $900, but they can last upwards of 20 years. If you factor that against lead acid, there is no comparison. A 200AH Relion batteryvweighs in at 60 lbs. There are very few cons, if you can afford to get one, do it. You'll be much happier in the long run
I agree with you. In considering it for when I replace these batteries which will be this winter. Gotta convince myself to take the hit though $$$
@@BassBrothersFishingDMV Did you replace the batteries that winter and why? Shouldn’t you have gotten at least 4 years of usage???
@@David-lf2ne I did replace them. I got 3 years out of them which is more than I heard they could do.
@@BassBrothersFishingDMV WOW! 3 yrs.. Didn’t know. This will be my first deep cycle battery.
I've always wanted better seats in mine. Yours look really comfortable. My main issue is that I've worn through the bottom of mine from 10 years of dragging it. Have you or anyone else done repairs to these?
Great, informative video as usual. Thanks.
Sydney... Thanks for the commenting. I've seen Zoffinger post a video using plastic welding to repair the hull on his pelican bass raider. Video link th-cam.com/video/SvqdSyaFxq4/w-d-xo.html. Not sure if this will work for you but check it out.
I just watched it. I'm thinking that the bottom of a pail would work for me. I live in Vermont so I have at least 4 months to think about it. Thanks for the link!
@@scottbrown7314 all good. Good luck.
tell me more about the gopro, is it good and what kind of pictures do you get
Gopros suck honestly. I use them anyway but it comes with allot of headaches.
What product did you use to treat the wood floor?
Spar Urethane - Oil Based
What kind of sealant would you recommend for the wood floor piece?
I used a generic one like Thompson waterseal or Bhear from home depot.
Awesome thank you!
You've helped convince me to get one of these bad boys! Have a kayak but need to upgrade to something with more space. Can you tell me how much draft the bass raider has? Seems like maybe just a few inches? Also, my lake has a bunch of lily pads...how maneuverable would it be on some lily pads?
It's one of the best purchases I ever made. I deliberated over getting a kayak myself but decided on the Bass Raider for the ease of standing up and you get so much boat for the money. Not sure what you mean by draft. It does great in lily pads. Get a strong enough trolling motor and you can plow right through it. I've done it myself :)
Bass Brothers Fishing DMV Great to know, thanks! Draft would be how much of the boat is underwater, or distance from water line to bottom of the boat. Only concern now will be horsing this thing in the back of my truck after fishing with a bad back. Sadly my lake is hand launch only and I got no room for a trailer!
@@neilstevenson7518 ok thanks for teaching me something. Fortunately this boat can be hand launched and rooftop mounted. We just put out a video this morning on loading it rooftop. Hope it helps. We also put a video out on a DIY boat dolly just for those situation where its hand launch only. Good luck.
Awesome, I'll check out the video. A dolly would do the trick for sure. Can't wait for it to warm up here in MD, lots of great fishing spots this will be perfect on. Thanks again sir!
Have you thought about screwing a little bracket of sorts on the subfloor to go in-between the ribs on the side of the boat?
I haven't. Not sure what that would do for me. Please explain.
@@BassBrothersFishingDMV just to keep that one piece of wood from moving forward on you
I'm looking at this boat for myself does it ever take on water
Nah, it takes on more water in my driveway from heavy rain storms than on a lake.
What battery you used for your depth finder?
I use the Bass Pro Shops XPS Xtreme Performance Series
Power Series
Model XPS1280 12V8AH
HX 12-8
How long does the 29 group battery last you? Rough Hourly that is.
It last anywhere from 8 to 12 hours depending how windy it is an how much you stay on the motor. Anchoring helps to extend the life of the battery for sure.
How long is your shaft on the minn Kota
42"
What is the seat height ( floor to where your butt sits). Also where and how do you mount your transducer? Thanks
These seats sit you 17" off the floor of the boat. The transducer is mounted to the trolling motor which was important to me to not bore any holes in the boat.
In the video I think you said you used 1/4 inch plywood? Looks more like 3/4 inch. Getting ready to do this upgrade and think about weight. What did you actually use?
You are correct. It's 3/4"
Thanks for the quick response. I really enjoy your conversational approach to your TH-cam updates. They are very informative and very much appreciated.
Here’s a suggestion put a 12” x 12” 12 volt solar charger to keep your battery charged during use!
Not a bad idea. Might need to try that out.
I just got my 10e and getting ready to do the floor modification. When you say "treat the wood" what exactly does that mean?
You should coat it with a wood sealant.
@@BassBrothersFishingDMV
Like a polyurethane coating? or could you tell me what product you used?
@@jackwebb5917 There's several different ones out there. This is the one I used
BEHR Premium 1 gal. Clear Transparent Waterproofing Exterior Wood Finish
www.homedepot.com/p/BEHR-Premium-1-gal-Clear-Transparent-Waterproofing-Exterior-Wood-Finish-50001/301060429
Don't forget to do at least two coats.
@@jackwebb5917 just spray both sides and the edges with flex seal 👌
Did your boat come with a declaration of orgin original or did you have to call Pelican to get one. Also, how hard was it to register it. I live in CA. DMV here are requesting a title like copy.
I bought it from Dick's and yes it came with a declaration of origin. I had to get Dicks to sign it over to me though. after I got it signed registering it was a breeze.
Thanks for the reply, bought mine from Bass pro shop CA. they didn't know the process so I had issues at the DMV. Called Pelican had them email me a DOA with the info already typed, now have to go back to the DMV hopefully that will be sufficient. I'll keep you posted in case others have issues.
How much range do you get roughly with your battery and motor combo?
I've gotten several 12 hour days on one battery. But keep in mind that if you are driving around allot or fighting wind all day, that will decrease the time. Even with that said I typically get at least 8 hours even with wind. All depends how much you move around. Best thing to do is buy two batteries if you can. I've never used up two batteries in one day.
@@BassBrothersFishingDMV Great info as I have the same trolling motor( 55 lb thrust) or a 35 lb. to use on my new-to -me 8’ Pelican. I doubt I’ll be fishing over 4 hrs. at a time. You said “ I’ve gotten several 12 hr. days on one battery”. Meaning before needing to charge it?
You got to join the "Pelican Bass Raider & Bass Hunter Style Boats" Facebook group...tons of mods...probably any question you want answered is there for a pelican bass raider and similar boats. I have a few post with pics of my boat on there as well. Hope to see you there.
Hey Lonnie. Done. Thanks for letting me know.
@@BassBrothersFishingDMV You are welcome!
36 or 42 inch trolling shaft? Does it matter?
oops, I just saw that you answered 42 inch already for someone else. Is that uncomfortable when you operate it while sitting?
@@johnstauder4207 not at all. Plus we stand allot.
Why don’t you put treated wood in the boat?
I've heard that treated wood deteriorates certain metals so I try to stay away from it.
I noticed you didn't have the red and green lights or that white long light in the back. Is that enforced state by state? also great video! The anchor does it wear on the handle?
I don't fish this boat at night but if I did those lights would be needed by law. It's a coast guard requirement for all states. The anchor doesn't affect the handle much more than scrapes but it still rock solid on the boat.
How come you didn’t decide to add a casting deck?
At the time casting decks on pelicans weren't as popular. Now that I've has the boat for a while that will probably be my next project on it. But I think I'll build it differently than others have.
@@BassBrothersFishingDMV thanks for the reply! I’ll be looking out for that video!
Velcro stuck on with 3M?
It has its own backing.
The floor mats you can buy at Harbor Freight (get with coupon). I did 2 layers thick.
Nice.
Juan - I’ve seen those mats. Are/were you satisfied with them?
@@David-lf2ne yes, nice and soft to walk on. I believe there 4 to a pack at Harbor Freight. If you have a hard bottom boat you will be glad you have them and easy to clean.
@@juantomas3630 I remember the package stating they are closed cell foam.
@@David-lf2ne they could be, they work good for me and the price is good when on sale.
Do you have to license this boat?
Yes. But check your state. In MD I had to license it.
Your pwr issues are because you're using Starter type battery when you should be using Deep Cycle battery!
I'm using deep cycle
wished i found this video earlier..
Basically
Basically
Basically
Basically you need a thesaurus
Basically
Send me one!!!
@@BassBrothersFishingDMV www.thesaurus.com/browse/basically
@@FranklinHicks-qs4gs Basically I'm saying thanks.
@@BassBrothersFishingDMV a thesaurus doesnt do much good if you dont read it