for anyone who has this controller , i recommended getting some krytox 205-g0 and lube trigger hinges and spring. Makes it smooth and remove creak noises.
The mechanism on these triggers is really fragile, I got mine broken too, apparently it was factory overtighten and it broke the hinge retainer part, Gulikit really should sell spare parts.
Why did you have to remove the PCB to replace the trigger? The screws are clearly visible above the button/sticks board. My trigger just broke after very light use. Literally popped out I assume cause the spring wasn’t seated properly. So there are 2 springs per trigger???
Nope I just got a thunderbot controller I did get in contact with the company even made me make a video and send it to them in the end they never send me nothing
hi bro, just want to ask if the analog sticks can be re aligned, my copy has a misaligned right stick, its not dead centered like the left one. thanks mate.
@@revanzafares9636 GuliKit sent me the replacement parts free of charge when I contacted them through AliExpress chat and sent a video of the controller. I don’t see a listing on their Ali page to purchase spare parts though, you might need to ask them directly
I found the solution but it's a bit nasty, you need super glue and you need to apply some to the button and stick your finger on with a glove or something
One of the back paddle buttons is getting mushy. I see its plastic so its bound to happen but after only a month is annoying. Wish theyd go with a definitive version of static paddles instead of leaving it up to us to pick and choose on the fly. They need a permanent solution.
Hello, My A button is keep triggered if i hold it.. And if the A button pressed 1 time its triggered 3-4 times.. How to fix that? (Sorry for my bad English)
@@bento9858 bro i know now to fix it press mid button(the gear button) then the letter that is rapid firing I think (only a guess) apparently its a setting sometimes the manufacturer accidentally trigger or maybe even the user
So this dude is Tweakin out you absolutely don’t need to remove the pcb board if you’re just replacing triggers the screws are right out in the open just unscrew them sunsuvabitches and boom done swap in the new ones DONE
![[UNCUT]“ฅนตื่นธรรม”ปะทะ“หมอปลา-ปู่มหามุนี-อั๋นโอกิ”สะเทือนกระทรวงเวทมนตร์ Iคนดังนั่งเคลียร์I10 ตค.67](http://i.ytimg.com/vi/peMD_SAkwNc/mqdefault.jpg)
for anyone who has this controller , i recommended getting some krytox 205-g0 and lube trigger hinges and spring. Makes it smooth and remove creak noises.
I just got replecment parts for the triggers on mine been updated now to a double torsion spring
The mechanism on these triggers is really fragile, I got mine broken too, apparently it was factory overtighten and it broke the hinge retainer part, Gulikit really should sell spare parts.
ayoo, just wondering do you have any link or know if there's any shop that sells kk3 max triggers replacement? materials are very fragile
yes brooo i need that please
thansk bro you was really reallly helpful, appreciate you maked this video
Why did you have to remove the PCB to replace the trigger? The screws are clearly visible above the button/sticks board. My trigger just broke after very light use. Literally popped out I assume cause the spring wasn’t seated properly. So there are 2 springs per trigger???
my ZL trigger is done where can i get a replacement ?
Up
are you already got replacement bro
Nope I just got a thunderbot controller I did get in contact with the company even made me make a video and send it to them in the end they never send me nothing
hi bro, just want to ask if the analog sticks can be re aligned, my copy has a misaligned right stick, its not dead centered like the left one. thanks mate.
Try doing the calibration method. It resets the center.
My thumbstick broke I need a replacement. May I ask what compatible thumbstick can fit?
one of my ZL trigger broken, i did glued that part still not strong enough to stick. How can i get replacement?
i am really sorry, didnt realize that u said u got these replacement from the store u used to buy this controller
Up
are you already got replacement
@@teukugennaro2949 no unfortunately
Aaaaaand i tore my ribbon cable. that thing is tough to take out.
where you buying ZR trigger button. Plis drop the link broo
@@revanzafares9636 GuliKit sent me the replacement parts free of charge when I contacted them through AliExpress chat and sent a video of the controller. I don’t see a listing on their Ali page to purchase spare parts though, you might need to ask them directly
help, i unknowlingly put the swap the A and B button now he A button is too deep i cant remove it, what do i do? i just bought the thing
Same man 😢
I found the solution but it's a bit nasty, you need super glue and you need to apply some to the button and stick your finger on with a glove or something
One of the back paddle buttons is getting mushy. I see its plastic so its bound to happen but after only a month is annoying. Wish theyd go with a definitive version of static paddles instead of leaving it up to us to pick and choose on the fly. They need a permanent solution.
Hello, My A button is keep triggered if i hold it.. And if the A button pressed 1 time its triggered 3-4 times.. How to fix that? (Sorry for my bad English)
same problem what did you do? did you fix it?
@@o_o3557 yeah, i fix it by resetting the controller.. Press the gear and minus (-) at the same time.
But now i have a new problem, the L button (L1 on PS controller) is broken.. When i press it nothing happened.
@@bento9858 bro i know now to fix it
press mid button(the gear button) then the letter that is rapid firing I think (only a guess)
apparently its a setting sometimes the manufacturer accidentally trigger or maybe even the user
@@bento9858 did you drop it?
This shitty trigger will be done in couple of months, because they use the same trigger from gulikit kingkong pro 2.
my conteollre dorsnt tuen on any more you should have said that it has a secure before anything else
So this dude is Tweakin out you absolutely don’t need to remove the pcb board if you’re just replacing triggers the screws are right out in the open just unscrew them sunsuvabitches and boom done swap in the new ones DONE
I can't bring out the trigger plastic because of the PCB, how did you do it?
funny music