ฝัง
- เผยแพร่เมื่อ 24 เม.ย. 2021
- In this video you can see how I changed the stock thermal pads (of poor quality) of my MSI RTX 3080 Suprim X with the high quality thermal pads from:
-Gelid -GP-Ultimate
-GP-Extreme
and some
Thermalright Extreme Odyssey 1.5mm.
On the backplate of the card all the thermal pads are 3,5mm in thickness (height), like you can see in the video.
Since I didn't have the 3,5mm size I combined 3mm + 0,5mm, but you can also do 2mm + 1,5mm .
On the front of the card, as you can see in the video, you will only need 2mm and 1,5mm thermal pads. You will find all the other sizes in the video.
From my point of view this mod is a must! The stock thermal pads from the factory are of poor quality and the GDDR6X memory of the RTX 3080 runs insanely hot, over 90 degrees Celsius!
Now after I changed the thermal pads, the temps of the memory do not exceed 76 degrees Celsius in full load!
If you are not able to change the thermal pads on your own, take the card to a professional ! .....or do it ON YOUR OWN RISK!
I AM NOT RESPONSIBLE FOR ANY DAMAGES OR HARM YOU MIGHT DO TO YOURSELF OR TO YOUR GRAPHIC CARD FOLOWING MY VIDEO OR MY ADVICE ! :p
Thanks for watching my videos ! - เกม
Legend! Even listing the sizes of the pads so we can pre-cut them in the right thicknesses to save down time by cutting the pads beforehand. You sir, deserve a massive thumbs up. 👍
Your feedback is "gold" for me. Thank You!
Are the thicknesses the same for the 3080ti version?
@@mixobox2334 do you only need one box of each size pad ?
Here are the times for the pad sizes, might help somebody too!
2:51 Thermal pads for the backplate area.
10:45 Thermal pads for the front area.
And of course, nice video!!
Thank you!🍻
@@mixobox2334 Hi, for a full replacement you will need 1 piece of 80x40x2mm, 2 pieces of 80x40x3mm and an additional 100x100x1.5mm?
Finally my pads arrived. I was hopping that the temperature would drop 20°. But if it lowered 10º would be something.
Before: Mem +950, PL 56%, fan 90%: 90000 MH/s, mem temp: 102º
After: Mem +950, PL 56%, fan 90%: 93000 MH/s, mem temp: 66º
Then: Mem +1100, PL 65%, fan 70%: 98000 MH/s, mem temp: 70º~72º
Much more then 20º!
Thank you MixoBox for that amazing video.
Those are like 4w pads
This is the best thermal pad replacement video I've seen on any card. Thorough and easy to follow. Nicely done.
Thanks a lot buddy, I really appreciate your comment🍻
A very big thank you to putting this guide up, it made the task very easy. I bought a 120x120 square of thermalright odyssey in 1.5mm and 2mm thickness, I still have enough left to replace the memory pads if they deteriorate over time.
Before I changed I was down to 80hm at 106°. Now I'm at 101.5mh at 68°! Incredible, that's almost 40° improvement.
Thanks for showing the whole process in detail and even the measurements for the pads, really nicely done o7
Thank you!
I just want to stop by your video and say Good Job for using that tracing paper to map out your graphics card! That's exactly how I changed the thermal pads on my Xbox and installed a new SSD into it!
Bravo!
Thank you so much for this, I was looking on everywhere and couldn't find it.
Thanks!🍻
This was a massive help, thanks man. Mine were 110 all the time, now sitting at 90c at 50% fan speed. The oil was a bit frustrating to remove, but so worth it. Feel so much better during photogrammetry calcs.
Thank you and nice job!
will changing pads only at the back plate also work?
Thank you sir, this is insane. I was skeptical at first but I'm now sitting at 80C from 100-106C, WORTH IT!
Good job bro! 👍
The superfly guy sent to take us to a MH/s high. Blessings comrade your efforts are appreciated. Perfect info and nice Video edit skills and presentation style.
Thanks for all the effort you went through. This video was worth it. Best of its kind.
Some real proper information without a single a world 👍 Legend 100 💯 !
Thank you m8, I really appreciate your feedback!🍻
Went from 96 to 70 degrees , very good tutorial! Thanks alot
Great video! In the process of replacing my pads now and I’m very thankful for your detailed shots and measurements!
Figured I’d throw this out there for anyone spending FAR too much time trying to clean the leftover pad residue from between the heat sink fins.
After removing the old pad, wet down a q-tip in some Goof Off/Goo Gone/other adhesive solvent. Push/roll the q-tip down the length of the fin and the leftover material should let go and come off in a single piece vs. having to scrape and clean small chunks at a time.
I found isopropyl alcohol didn’t do a good job as a first step if there was leftover pad still left on the surface.
Definitely use alcohol as a last cleaning step to remove the Goof Off though.
Can't explain how much this video has helped me. Thanx a lot 👍👍
Thank you !
I also renewed the thermal pads of my Gigabyte Aorus 3080 master card with thermalright 12kw pads. It used to work at 110 degrees before and now it does not go above 80 degrees. I won exactly 30 degrees. Meanwhile, the ambient temperature is about 30 degrees.
He guided me for my supremacy I was thinking of. Good job. Thanks.
Thank you for sharing. You 2 made a good job! Like I said, the cards should come like this (with good thermal pads and good temps) from the factory! And not force us to pay extra money on top of the already high card price..but hey what can we do?!....besides doing their job ourselves😅
@@mixobox2334 Your welcome :)
It is disappointing that manufacturers use such bad thermal pads. Gigabyte stock pads were terrifying. 110 degrees for the first use. Even if we send e-mails to producers, nothing will change. We have to add an extra 50 Euros to the money we give to the cards ...
Did the same today 108c to 78c and 25% less fan speed used 1.5mm and 3
@@FireTwo Good Job m8!
@@m_emre_b do you maybe have a link for a tutorial to do it on a gygabyte waterforce aio 3080?
Well thats just saved me a load of messing around thank you sir! Awesome video 👏
Лучшее видео по замене! Особенно полезна карта прокладок с размерами! Прошу выложить фото этих размеров для быстрой печати!
Awesome video, amazing detail!
Thanks!
THANK YOU SO MUCH!! GPU went from throttling at 80MH to getting 100 MH with 78C mem temps. The stock pads really are terrible aren't they. I only bought one 1.5mm pad and one 0.5mm pad pack because that's what you showed but I made it work. For anyone planning ontrying this, get (gelid):
Two 3 mm
Two 0.5mm
Two 1.5mm
Two 2.0mm
but which sizes with Lenght and Width Please
@@krikorkelendjian3051 just the sizes he used, u can measure the pads already on there
good vid, did it, swapped only gddr pads for gelid 15mkw and pasted gpu with kryonaut, now card in just internet surfing is 4c above ambient and nbminer 1300 mhz dropped from 98 to 68c
Excellent job buddy
Thanks m8!
-20 celsius when mining . Thermal grizzly 8w/mk pads used. Thanks for the tutorial!
Thanks,thats a very useful video!
Thanks man great work
Mixo! I have 4 of these to complete. You are a legend! we need more people like you in this world. Also you can buy the msi warranty sticker online encase you need it ;) Legend
Thanks m8. I really appreciate your comment🍻
@@mixobox2334 love ❤️
Replaced my pads today. These are my findings...
Before:
Optimized High Setting: PC would crash
Optimized Medium Setting: 96-98 degrees (prior to buying a new case i was getting 98-102 degrees.
Fans were @ 100% most of the time
‐--------------------
After:
Optimized High Setting: 84-88 degrees
Fans no higher than 45%
Drastic changes on my end, i can only assume a 20-25 degree drop in temp and a much quieter PC in general.
Thank you for this sir!
thank you so much! i went from 100-108°C on the mem to around 80°C!!!
Awesome stuff, thanks!
You're welcome!
Excellent Video thanks for being so detail oriented even giving us a chance to write down the sizes. I am curious to know what the improvement was in temps?
Thanks. It was like aprox 30 degres Celsius lower temps on the memory.
Excellent video quality, and the results are amazing. This make me think, i have 3070 ti suprim x, the the cooling system is identical. I can hardly believe that msi did not put quality Thermal Pads :( what a shame. Edit: It looks like i have diffrent size for pads
Thank you.
Thanks for the informative video! BTW, is there any reason why you didn't also use Gelid pads for the front?
Fantastic video. You have no idea how many gpus you have saved during these 15mins. I am always confused tho how much thermal paste should be put on a gpu itself? Is it easy to apply too much?
Once again fantastic job sir! GPUs lives matter!
I love you, great info
Just a little tip for MSI cards, you can peel off the sticker with tweezers since the sticker is bigger (6mm) than the actual screw. :)
Great video mate, really helpful. I have one question, how many of these pads did you go through? Im looking at purchasing 3x 1.5mm and 3x 2mm. Would the be sufficient?
Thanks so much MixoBox! I really appreciate you sharing and posting this. I also wanted to share my experience in the comments as others had really helped me with their posts.
I had horrible temps when mining (108 degrees+ at 90Mh/s. Fans 100%, ambient temp 23/24 degrees). It seemed to be getting worse and harder to get the temp down to a level where I wasn;t panicking about damaging the card. So, I bought one 120x120 2.0mm and one 120x120 1.5mm of Thermalright Extreme Odyssey pads (which was more than enough and covers all the thicknesses and lengths you need). I also got some Thermal Grizzly Kryonaut.
Taking apart wasn't too challenging - I used little pots to keep the screws in as I disassembled the card - obviously using your video to guide. I really took my time - super slowly - prepared my workspace, tools and and cotton buds etc. I started off using calipers just to make absolutely sure I my card had the same dimensions - they did. I also got two pieces of card and placed the original, removed, thermal pads in the same placement as the card for reference, which turned out to be a wise move later.
I cut the pieces to size and applied, cleaned everything with 99.7% Isopropyl alcohol. The Thermal Grizzly Kryonaut was extremely thick and sticky so smoothing it out nice and neatly was very difficult. Also I was getting tired and impatient, so made a real mess of it. I reassembled anyway and fired her up. TechPowerUp was showing that temps were maxxing out at 110 degrees, so the card throttled there, and hash-rate was poor. I knew I must have done something wrong, didn't want to damage the card and switched off immediately.
So... I had to open up again. Prime candidate for where I went wrong was the thermal paste application - I made such a mess of it and I was sure over-applied. I ordered some Arctic MX-5 and decided I'd reapply no matter what but didn't want to use the Thermal Grizzly (it was like thick glue). My other fear was "Did I definitely remove the transparent plastic from the thermal pads before reassembling?". It's the kind of thing I expect of myself when tired and impatient. But no, there was no film on any of the pads.
Then I saw it. ONE pad was completely missing!! I spotted it on the video, then checked my board of the original pads and there it was - my replacement pad was sitting there with it's plastic film one (I'd placed them side by side on the board as I went). What an idiot! I missed an entire chip. It was the number 5 pad (15mm x 12.5mm) for a chip on the board right below the NVIDIA processor. I felt so stupid.
Card back in and I was praying...
Now I am mining at 97Mh/s. Memory temp is at 78 degrees and staying firm with memory clock at 1100MHz.
I'm going to experiment as now it's all open to new settings. But I'm so so pleased.
Thanks again. And thanks to all the people who added their experiences as it really helped me.
Wow! Good job m8. Thank You for sharing with us your experience! For sure it will help others 🍻
Hey man, very nice how-to was very thankfull to see how easy it is.
But would it be possible to tell me the exact amount of cooling pads you had used and which type? I tried to figure it out by myself by calculating the size of the areas, but I think I made a mistake, because the amount seems to be huge!
Thank you.
Top. top video. The fact that any top tier card doesn't come with the absolute best thermal pads is a joke. It's really weird that they see this as an area to cut corners. I would rather it came in a plain box with no RGB but with the proper thermal pads. Thanks again.
Your words are so true!
@@mixobox2334 my thermal pads arrived this morning. 😁. Exciting.
Oh nice, enjoy the process! 🙂
@@mixobox2334 I will follow your video and diagrams. Thank you so much.
@@mixobox2334 It worked so well thank you so much. Legend status.
Awesome vid; would like to see you do the 3080 Gaming X Trio as well if you have it, the VRAM temp is horror on this one, I have to keep it at -502MHz to not go over 100 deg.
Msi Gaming X Trio I have it only in 3060Ti "flavour" .....but the 3080 Suprim X and 3080 Gaming X Trio have the same layout ......ex: If you search the waterblock for the MSI Gaming X Trio is the same for this 4 cards : 3080/3090 Gaming X Trio, 3080/3090 Suprim X !😉
@@mixobox2334 what about the ti?
What a video. I've both 3080 and 3080 ti Suprim X so I was wondering if you had any encounter with the Ti variant. I will order the pads accordingly to this information so might have to double the order :/.
What is the thickness of the thermal pads on the memory? In the video you measured them to be 2mm but on the package ( the gelid one) was written 1.5mm. What should I get for mine?
Hey great video, can you tell me how much exactly of total surface of pads do i need?. I did watch video but cant tell exactly. Will one piece of 120x120 be enough
Hi @MixoBox, this is great video...!
I have 3080 Ti MSI SUprim X, is it same thickness for the thermal pad?
please let me know.
My reach 98C for now..:3
Nice video thanks.. Is it the same for the suprim X 3090 ?
Awesome Video! Could you maybe post the dimensions so I know how big the termalpads need to be before I buy way to much :)
Edit: I would like to know how much I need to buy to cover all
How the core temps are holding after 8 months now as I read some complaints about performance degradation using this paste after few months due to pump out effect. similar goes for wet pastes like MX-4 and NT-H1.
Thank you for this excellent video. I'm not sure I trust myself to pull this off (pun intended) but maybe a little bit down the road. I find it unbelievable that MSI uses crap-pads on this card which is supposed to be the upper echelon. It adds insult to injury.
It's not only MSI that used bad thermal pads! 😉
Hello man,someone before said me that i've to buy 2mm thin thermal pads,or 3mm only like in your video?One more questions,how temperature have changed after u replaced the stock pads?
hi, is it possible to remove the fan shroud without taking the cooler off the board? my side rgb has gone weird, i want to see if its connected properly. seems like loose connection but only the side/edge rgb
Hello, one question, I have a 3080ti suprim msi, are the thermal pads the same size as in this video or do they change? Why do I need to change the thermal pads?
thank you sir
Are pads on backplate necessary for 3070 version and how long till it’s needed to do this generally?
Just building a system.and looking at this card. Is there any cards with decent Thermal Pads. The cards cost so much, you would think wou wouldn't have to do all this extra work!?
Thank you very much for the work, very well explained. What thermal paste do you use for the core?
Thank you! I used Thermal Grizzly Kryonaut.
@@mixobox2334 I have 2 year old Kryonaut re-capped or sealed, still good?
Is that 1 x 120x20x0.5mm, 1 x 120x20x1.0mm, 1 x 120x20x1.5mm, 2 x 85x45x2.0mm, and 2 x 85x45x3.0mm that you ordered? Also, you mentioned you used 0.5 and 3.0 on the backplate for 3.5, where did you use the 1.0 on? Saw someone on reddit use 1.0 for the VRMs. Is that where you used it on?
Hi MixoBox, first of all thank you for the video !! I wanted to ask you if that thermal pad are the same on the MSI RTX 3090 Suprim X ?
Atleast on the front of the card I say the pads are 100% the same
@@mixobox2334 Thank's dude
What are the chances of my msi 3080ti suprim being identical to this in thermal pad sizes and teardown etc ?
СПАСИБО БОЛЬШОЕ!!!!!
My Suprim X 3080 maxes out it's VRAM temps at around 92-93c, which is ok. It's less while gaming.
No need to change anything, thankfully. Bought it back in December.
Not bad, id still like lower though for the longevity of the card
@@j.b.7133 that's the worst i've seen, just a few times. And that was during summer. It mostly sits around 80-85 during my regular gameplay sessions.
Now my VRAM reached 88 degrees max when mining, thanks a lot !
Good job m8!
How many MH/s do you get at that temp?
@@drScorp1on 98!
@@FetidBreath that's quite good! Congrats!
can you tell me what settings do you use to get 98 mhs? and what miner please!
Interested in doing this but trying to figure out pads. So far been recommended gelid, frosty ice cube plus, thermal grizzly, and thermalright. With so many options should I choose the cheapest if they all have the same thermal conductivity?
Yea, the pads are already kind of expensive...so buy the cheapest from the ones you mentioned.
I tought the Suprim series is the king of all series, very weird that the thermal pads are not a good quality.
Hey, I might buy this GPU used. How do I know wether I need to replace the pads? Was replacement necessary in your case? How did you know? Thanks!
You used 1.5 gelid pads instead of 2 that was drawn from ur outline?
Can you make a pdf copy of those 2 sheets posy online please thanks for the videp
Great video! One question: is it necessary to use 3,5mm pad on back side, stacked with two pads (3+0,5mm or 2+1,5mm) when on this side all pads are with the same thickness? In my opinion it would be enough to use one no stacked 3mm pad instead of two.
Thanks, You can use 3mm but I can't assure you it will do the same job as the 3,5mm ! Try it and tell us your result 🤪
Did the 3mm do the job?
did you stack thermal pads? one 3mm and 0.5mm? to make a 3.5mm?
Why are you replacing the pads on the backplate with effectively the same thickness? If the idea is to increase cooling, wouldnt you want to replace the 3.5mm pad with a 2mm pad?
This video is amazing great work, well presented I’ve got 6 of these to do
Thank you
It’s a shame you don’t have a ASUS Tuff I’ve got one thermal throttling bad
I have an Asus 3080 Tuf, the tems are better stock vs stock MSI Suprim x. When I have time(I hope soon) I will make the video😉
@@mixobox2334 I’ll wait till then before tackling the TUF, the thermal pads turned up today so will tackle the suprim X
This week the sooner the better
@@robertball3301 Have fun m8! 😁
so where are the result before and after ?
electronics spray removes way more way better. and you dont have to risk snagging anything on any of the chips. you should try it. wd40 contact cleaner or crc electronics cleaner. I have both and they both work fine. you just need to let the card sit in a open area overnight so it all evaporates and you end up with a pcb that looks like it just rolled out of the factory....Perfection.
Is using 2 thermal pads stacked on eachother ok? Seems like it wouldnt be
You are the best!
I plan to change my thermal pads for 3090 Suprim X and I found this video 😀💪🏻
Can I mix thermal pads or they need to be in one piece? For example for 3.5mm can I add 2+1+0.5mm?
I think you can do that, but I only mixed 2 pads with different size(3mm+0,5mm)
@@mixobox2334 I successfully changed my thermal pads on 3090, and I had right sizes for everything. Temps went from 105°C to 90-85°C 🙂
@@mixobox2334 hello so for the 2mm u put a 1.5 mm ?
Hello Aleksandar, does the dimensions and heigh for the pads are the same for the suprim X 3090 ?
thank you1
I have had my 3080 suprim X for about 3 months now. At the start I was getting 100mh at around 92° which I was happy with. It's got steadily worse though and I am now at around 90mh at 102°. Every few days it seems like I need to pull the clock back to stay on top of temps.
Has anyone else experienced this sort of degredation on stock pads? Will new pads eg thermaltake or gelid degrade the same?
Also I can see 6w/mk pads are about half the price of the gelid ones, is 6w/mk enough of would you recommend the more expensive pads?
If i did just the back plate (1st part of the video) would that bring down the memory temps ? Or would i need to do them all ?
Changing the thermal pads only on the backplate will make a small improvement in lowering the temps.
The problem is that you are measuring the thickness of the pads and not the actual gaps themselves. The stock pads are probably more compressible, thus the actual gap can be smaller than those f.e. 3.5mm that you've measured on the back.
What problem? The Vram temps improved with more than 20 degrees celsius!! Cheers
How do you remove the warranty sticker on the screw?
Try to measure again pads 1,7,9 again with vertical caliper you will find the hight is 1.0mm check hight of vrm and sink you will see or easily use vertical caliper
hi, are the dimensions the same for msi rtx 3080 gaming from?
What is the difference between the 12W/mk thermal pads and the 15W/mk ones and which do you recommend if you get both models? I have 3 3080 and I need to change them urgently !!
The higher the better. If 15W/mK is not significantly more expensive, pick those
bonjour , pour la 3080 ti suprim x c'est la même chose ? Merci
i have same card and I've seen some people say u can use a 3mm on this,i bought only 3mm because some people said 3mm also it's good and i close the backplate with only 3mm the it had huge space between pad and the pcb ,and i added 0.05 that i had left from other cards and you CANNOT use 3mm at all barely touches the top of the smd's like 0.01~0.02 don't even try to use the card with 3mm ,used grizzly but the material its too hard for it to go in between the smd's so its doesn't touch the surface well, i pressed it a bit but didn't do much difference, it's a bit more stable i managed to raise the clocks at 1000+ mhz from 850, before it would had crashed if i had tried to put it at 1000mhz+ the temperature fell like 4-6 degrees, couldn't find 3.5mm anywhere changed the pads only on back of the vram, not on the sides also, because i didn't had enough 0.5mm.
Changed my pads, sold as 17w and 20w ,was some cheap chewing gum.
left side on cooler the pad was 1mm and the next was 2mm, weird enough. and the last one one the right side 1mm
in this video all 1.5 mm or 2mm
This is so tempting to do but voiding the warranty is stopping me from doin this.
I have a question, i have same card, does replacing thermal pads only on backplate is worth ? i mean my junction temp is 92 while gaming, core 75
I don't really want to open up the card more then once ......so I change all the stuff in one go. Cheers
Thanks for this very useful video! With the help of this video I did pad replacement today for my 3080 and 3090. Went from 106C to 76C while mining on my 3080! Very happy with the result. Results were not that spectacular for the 3090 tho, only about 10 degrees less then before from 108C to 98C but still not bad. I had to stack a lot of pads on the 3090, might have something to do with it.
How much different are the pads on the 3090 to the 3080?
Amazing video. Aren't there thermal pads of 3.5mm?
I didn't find them on Amazon( Geil, Thermalright..)....but you can find other brands on Aliexpress in 3,5mm.. but I don't know how is the quality for other brands...
I see this is the 10GB card. Can someone confirm if the pad sizes are the same for the 12GB card?
yeah I’m gonna have to do this too - that VRAM likes to get toasty..
How much improvement to expect on a MSI RTX 3090 Suprim X where VRAM reaches 90°C thanks to fans trying hard to maintain it there?
My silent BIOS works fine, though the fans ramp up to 2000rpm to maintain 90-92°C on VRAM and 80-82°C on GPU under heavy load.
They didn't go that high during winter though, max rpm was about 1500 back then. Now I have ordered enough Gelid GP-Ultimate pads to make this upgrade on my card as well. It'll take a while for the pads to arrive though.
Since we have to use 2,0mm with 1,5mm for the backplate, did anyone tried to combine the pads with paste between 2,0 and 1,5mm ones? Does this give any boost to the efficiency?
I say at least 10°C improvement and more if you do it right. You don't need to add termal paste between two layers of thermal pads, don't over complicate things😉
Great video, I must be doing something wrong calculating the number of thermal pads, ¿how many of each type did you buy? Greetings
In the beginning of the video you ca see that there are much more thermal pads that you will ever need for just 1 card...."If you are planning to get the same pads, get 3PACKS of 85x45x1,5mm(combined total 255x135x 1,5mm and 2PACKS of 80x40x2mm(combined total 160x80x 2mm). So on the back of the card to make the 3,5mm you will combine the 2mm+1,5mm." Have fun!
@@mixobox2334 Thanks a lot, I will buy it and some more in case
@@mixobox2334 Hi, I have follow your video steps perfectly, thanks, no problem at all, but my vram temps are nearly the same. I have seen other video of 3080 suprim and seems to use other pad thicknes, for example here --> th-cam.com/video/H3pkLYqquj4/w-d-xo.html
Even, in the ekwb 3080 suprim backplate, they only use 2mm and 1 mm pads.
¿how is it posible if some of the originals are 3,5 mm
Thanks in advance, greetings
@@clamatac So you changed the thermal pads and your temps are still the same and very high?(How is your oc...undervolt of the card? How is the airflow of the case...the ambient temp.?) Now to answer your questions....:
1. In the video you linked, he only talks about one thermal pad size(2mm) and at the time he says "2mm pads" the camera is focused on the memory modules of the card ! So he only refers to the Vram pads(the most important pads for our problem " for high VRAN temps!"). You should see improvements with only as little as changing the memory pads! This is of course true only if the stock thermal pads are trash and your VRAM temps are very high!
2. The thermal pads for custom waterblocks/back plates are not 100% the same with oem pads..... Because the gaps between the back plate or waterblock can be offset from original ones....only the size (length and width) and the placement on the pcb is the same as original not the hight/thickness! I hope I aswered your questions and made it more clear for you. Cheers m8!
@@mixobox2334 Hi, all the thermal pads have been changed. Before the change for not having thermal throlling I had to have full open case with 75% fans in order to have vram at 106-110º C. Now at least have similare results with the case closed. So it is working better but not as I espected.
Was there any specific reason why you used two different brands? I see someone else replied they just stacked thermalright…
I bought what they had in stock..no other reason.
Great video! Was so excited to see the sizes and thickness listed, that I didn't even notice I'm looking at a 3080 video and I have 3090's
Do you know at all if their pads are the same?
Well done again on the video and thanks for it. 😎👍
Anyone here know if the backplate thermal pads size is the same with the RTX 3090 Suprim X?
Should be the same! 🍻
hi, can you list the quantity and size of pad to use? i planning buy but don't know how mamy pcs?
Hi, as you can see in the video I used Thermalright and Gelid pads, in 85x45x1,5mm and 80x40x2mm size . If you are planning to get the same, get 3packs of 85x45x1,5mm(combined total 255x135x 1,5mm and 2packs of 80x40x2mm(combined total 160x80x 2mm). So on the back of the card to make the 3,5mm you will combine the 2mm+1,5mm. Have fun
@@mixobox2334 Mixobox you legend. Pin this to the top mate. It's too helpful to be hidden away. Thank you so much.
Anybody tried putting in a thermal grizzly carbonaut pad instead of thermal paste?
Thank you SO MUCH @MixoBox, I won between 20 -24 °C (from 96-100 to 72-76) in memory temp @100% in the same conditions (fan speed @60 rpm, optimize:lite in nicehash), thanks to you and your video, very helpfull !!! I used for those who want to do the replacement only thermalright pad, 120x120, one sheet of 1.5mm and one in 2.0mm. Enough for the whole graphic card, (I used 3/4 of both sheets). Again, a big THANK YOU, and even if it is sad to pay for that, it worth it :). I wish it will last long time, have you seen some degradations in terms of memory temp over time ? I have seen it with stock pad in one month only, hope it will be not the case with new pads...
Thank you for your feedback! I really appreciate it! My temps where like yours when I did the change(with 22-24 abient temps), now my max mem temps are 77-80 degres Celsius with 90% fan speed, but the ambient is 28-31 🤪. So even if is some degradation ...is minimal, like 2-3 degres.🍻