MSI Trio RTX 3080 Thermal Pad Replacement
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Tear down of the MSI Trio 3080 to replace the memory thermal pads. I averaged 104c memory temps in hwinfo at 98.5 mhs before and 74c at 100.5 mhs after replacing the thermal pads.
I used 1mm FujiPoly pads on the memory modules. Used a 60mm x 50mm size pad from amazon. 17.0W/mK
Not Using Hive OS? It's easier than you think and it's free to start!
hiveos.farm?ref=342706
Looking to invest?
Coinbase - www.coinbase.c...
Binance.us - accounts.binan...
If anything in the video helped or inspire you, consider a donation.
Eth - 0xd2A81b935C60D45A74A347C74fE76e374B63BD18
I just found this video, there is a gap between the memory and the heatpipes. 20c colder after the fix. Maybe you can try it aswell and show it in a video with the 17w/mk pads. th-cam.com/video/6m1w6y8I8oU/w-d-xo.html
this makes a lot of sense
Would be real nice to know the damn sizes…
Does this apply to the RTX 3080 Ti - MSI Gaming X Trio?
The Ti is suppose to be more similar to the 3090 from my understanding.
@@alaric3000 you should use 1.5mm or peraphs 1.0mm termal pads for memory...I've tried 2mm but its too big and get bad gpu temperature ...
Bro don’t use arctic silver !!!!!!! It doesn’t last long and it separates! It’s rubbish replace it with kryonaut extreme
I just added 1 thermal pad in between the heatpipes and the metal plate and I went from 110c to a steady 90c and I'm getting 100megahash
What pad size did you use? I ordered a 1.5 knowing that I may need to shave a bit down on the end of it where the pipes are closer.
What size I have some 1mm
For achieving 100 MH/s, what bios are you using and what overclock values? Thanks.
@@kamranki stock bios and I seen this card has issues getting 100mh on hive so I’m not sure what os you use but ok hive it gives around 80s
@@sheffrespawnz7235 Reply to the previous questions as well you dork
Id rather watch a 20 min vid were you talk about what you are doing and why. We all know how to stick stuff to things.
I also changed all the thermal pads and applied new thermal paste on this same model and the difference is quite noticable. Mine was maxing out at 98°C with 90 MH/s earlier. After pad replacement, it maxes out at 76°C now. I don't think the cooling system design is bad on this card. It's just that it ships with rather average quality pads. Changing them with higher quality pads makes all the difference.
What was the thickness of the pads? I watched a video where the uploader claimed MSI used 1mm 1.5mm and 2mm pads. Can you confirm that?
@@skmoyuncuportali Yes, different areas of the card use different thickness pads. Give me your gmail and I will try to send you some diagrams.
Hey man! Just purchased the thermal pads you used on this video. Unfortunately, the pad size is extremely small and theres need to be cover on all the vram chips. Was using one sheet of 60mmx50mm enough to cover all chips? thanks!!
Does anyone know if the 3070Ti uses the same size pads?
Did you find an answer or try anything? I have 1.5mm coming today that I'm going to try
@@sulkyvirus8676 sorry I haven’t done the repad yet. I ordered a bunch of sizes, I just ended up moving a few weeks ago and haven’t gotten around to it. How did it go for you?
Hi, I have msi 3080 gaming z trio LHR, and get 68 mh/s, can I flash suprium bios and get better hashrate? Alos need to replace pads? Thanks bro
epic music
mine dropped from 100c to 76c using Wovibo Thermal Pad 15W /m.k very cheap 9usd for 1 piece
Buenos días, haces ayuda ONLINE yo te pago por USDT si me ayudas a cambiar por favor
I used 1.5 pads and went right to 100c lol. Guess 1mm pads is what we are using yea?
howd you solve the power limit issue with the trio? i know they have PL issues and you have to flash the bios to something like the suprm x or even evga ftw3 bios.
I flashed the Suprm 3080 bios. I use 107 power limit and 1150 memory. Gets 99.5-99.8 in windows. Sadly the card under performs in HiveOS.
This has actually been fixed. There is a new bios you can update too in dragon center. It’s a new Trio 3080 and not flashing a different cards bios. Try it out and let me know if you get to the elusive 100 mhs.
@@Danielstarwars9 really? i just been running it just like you have on the 107-109 PL for about 2 months now without any issues. ill have to look into it. thx for the heads up
@@APxKP I don't know if there is another one again, but the latest 1 I installed a few weeks ago through Dragon Centre still has the same problem (it adds Bar support). If you don't set the power limit to 102% the core throttles to about 800-900MHz. You have to set PL to 102%, then use a Core Clock curve to set the core voltage to about 725mv and 1350MHz, then use CTL+L to lock that in. That will limit power usage to about 230-240W and give you 96-99MHps card dependant. Without thermal pad replacement, or a cold air flow (15c or less), the VRAM will start to overheat though. Its a pain in the butt though, I have no idea what MSI were thinking with this cards BIOS.
@@Danielstarwars9 I have tried this, but it bricks my card. I have to reset it with CMOS. Does this work with a b450? I have already flashed a new bios and have the resizable bar and such. Please respond.
So 1mm pad for the front and 2mm for the back. That’s correct ?
is 1mm the ideal thickness of the thermal pads for the VRMs?
I thought I bought enough pads to replace both front and back of the memory, turns out I bought enough to choose one so I chose the side with the GPU. Capping out at 104C instead of 110C at 24C ambient so I guess that's a plus?
did you get bad quality ones?
hello friend, can you tell me what thicknesses are the thermal pads on the chip on the vrm? Msi rtx 2080 trio?
can you tell us where to allocate which pad size? I cannot find anything on internet for reference
Is it the same for the MSI Trio RTX 3090? do you have a thickness scheme of the pads? recently changed and performance got worse?!
HELP
I don’t think so. The 3090’s have pads on the back and front I believe. I would triple check the thickness. Good luck.
What background music etc did you use? trying to find it to use for a similar video of mine thanks man!
WHAT CABLE IS THE RGB??? IS IT THE RED ONE OR THE BLACK ONE NEXT TO IT. I WANT TO DISCONNECT IT
I wish I watched this video first. Went to reddit and ordered the 2mm. They do not fit. The contact with GPU is weak and instantly overheats when doing anything that needs the gpu
EDIT:: Used 1mm pads from Thermalright. Temps at junction went from 104C and 94MH/s 100% fan speed down to 90C 98MH/s and 80% fan speed. Those are decent results
would you be so kind and provide us with an amazon link please??? did you get the extreme thermalright??? i read somewhere that there was a thermal pad too hard and that i should not buy that one.... which stock thermal pads did you replace??? all of them??? just the one for the mems??? did you use the 1 mm for everything you replaced??? man im scared of messing up my gpu.... should i only get 1 mm pads??? should i buy 2 mm ones??? I have a 3080 ti gaming trio
well you done so fast i didnt understand half of it hehe
how much temperature dropped anyway?
i have same issue with my card as soon i start using it to go to 110 and wont comedown!
core ic cool thou around 601~65
Bios Suprim X
バックプレートにはサーマルパットを付けないの？
Hey, thanks for a good reference. I performed the same fix and the memory of my 3080 X Trio dropped whopping 26C while mining
I used thermalright 1mm 13W pads and TF8 paste
I heard about this product that claims to be identical but is like 40% off thermalright. Would this work? It’s called Frosty Ice Cube Plus 12.8 W/mk thermal pad on Amazon.
The memory modules themselves will run at a different temperature to the video cards GPU. Mine indicates 55C (GPU) but the memory modules are thermal throttling because they are operating at a much higher temp. (Eth mining is very memory intensive!)
Do the other thermal pads need to be replaced at all? im not referring to the back plate ones but the long strips that are different colors.
After multiple tries with 6w/mk pads I was stuck with 220w 85mhs/96 memory temps. Today got thermalright 12.6w/mk pads 1mm pads in front gpu side and 2mm pads to backplate. I'm hashing 220w 95mhs 86-88memory temps. Long story short. W/MK on thermal pads MATTER.
235w 90c memory temp 97.5mh/s. With fixed 1125core +1200 on memory overclock. 90% fan. Thermalright 12.6w/mk - can recommend 👍
@@niljake did you reflash the bios ?
@@PeBeEsTe No need for that.
Did you do the back of the memory too or not? is it the same thickness pads on the back?
its not necessary
3080ti trio same??
Hi ,i am argentina
Quais as medidas dos pads que usou?
Hola buenos días, le cambié los pads termicos y ahora cuando inicio la PC se prende el fan al 100% y luego se pone la pantalla negra. Puede ser que sea porque le cambie los pads por otro grosor y no esté haciendo tope con el GPU el disipador? Gracias
Hello good morning, I changed the thermal pads and now when I start the PC the fan turns on at 100% and then the screen goes black. Could it be because I changed the pads for another thickness and the heatsink was not hitting the GPU? Thanks
hola, lo pudiste resolver?
I just did my 3080 Gaming Z Trio today(and I'm glad I did). Difference in temperatures is huge - it went from 98C with fans at 75% to 82C with fans at 50%. Still, even with cool memory mine only manages 89mhs :(
Just need to flash the bios to the suprm 3080 bios and it will give you the ability to increase the power limit which gives the memory enough power to hit 100 ish mhs. Glhf
@@Danielstarwars9 Thank you Lord ;]]
I'm a bit wary of flashing the bios, I wish this card had a dual one. I might do it at some point though, I've only had this card for a week...
new cards usually run cool but just wait about a month. itll slowly start to creep up to close to 100c junction temp. the thermal pads they use are crap. they leak oil just like the gigabyte ones. i changed my trio pads 2 weeks ago and its been running around 82c with fans at 70.
@@MaD_fX They have fixed this with a new Bios update for the Trio 3080. Use Dragon center and update your VGA (graphics card) Bios. Should get you closer to 100 mhs.
@@Danielstarwars9 I have tried that, unfortunately dragon center doesn't find any updates. My card's bios is 94.02.42.80.DC
i followed everything step by step. My card is still only getting 85 mh any thoughts?
ive got two 3080 msi one is doing 91mhs and the other 86 rubbish cards
@@-Bigjordan did you change all the pads or just the ones he did?
@@SuperChriscb nah cant be bothered on raven coin the 86mhs card works abit better
What thermal paste did you use?
No thermal pads on back plate?
Not needed. They are 3mm but unless you change the plastic back plate to an aftermarket one it won’t really dissipate heat anyways.
Did you measure the stock pads they used? They looked pretty thin on screen.
I need to replace mine this weekend too
Use 1mm pads for memory modules.
@@Danielstarwars9 awesome thanks
@@Danielstarwars9 50 x 50 is enough or need bigger ?
1mm 50x50?
Just ordered the pads! Will try this and see if temps gets lower! Thanks for showing!
Lowered my temps from 98-102 degrees to 70 degrees! Awesome thermal pads!
@@XzXmullvadXzX which brand? did u buy 1mm or more?
@@kevinlcubas7646 1mm. The price was high but just repadding my memory modules next to the core lowered the temps to 70°C!
It was exactly this item: www.amazon.com/dp/B00ZSJQLME/ref=cm_sw_r_cp_apa_glt_fabc_EQQQCFC2RDSE28A7YSXN?_encoding=UTF8&psc=1
@@kevinlcubas7646 if you buy it, measure and cut it with care! The size of the whole thermalpad is just more then enough for all the memory modules on the MSI card :)
@@XzXmullvadXzX dam here in canada it comes to like 50 usd, is it worth it? Thanks for your help btw
Thank you for making it comprehensive and not bloated with other crap. I subbed just because of that
well, care to give the spcific of the thermal pads? what size, thickness etc
I used FujiPoly 1mm pad from Amazon. A 60mm x 50mm should cover all the memory modules.
@@lordzuckuss1100 can i use 2mm for the memory?
@@sxn.8001 I would highly advise against it. Your gpu may not get the pressure it needs from the copper plate on the cooler and could drive up your temps on the core significantly.
@@Danielstarwars9 what if i slice the 2mm thermal pad to half will it work?
@@sxn.8001 why would you ever do that.....
Is it necessary to replace it for gaming ? I don’t think so.
if you want low temps, yes.
Take away a doubt : are you adding any thermal pad or just replacing ? IThanks in advance
I mean, is your card stock at start ? Should I change any other pad ? I have 1/2/3 mm pads
I am swapping my default out of box card pads 1mm (junk) to 1mm highly quality memory pads. Just memory the other pads are fine. Good luck.
@@Danielstarwars9 ok, I'll do the same to try to make vram temps go down 👍
@@Danielstarwars9 are temps annouced in gaming or mining ? Managed to change pads but with cheap ones and it's still not good, receiving high quality tomorrow to give it another try ! Also, do you think changing backplates pad behind memory could work ? I know the backplate is some kind of plastic but..
@@briceprovost2309 it will help with changing back plate pads, but only by a few degrees C (like 1-3) from what I’ve seen. I didn’t change them myself as the ones directly on the memory made a huge difference.
Gaming really shouldn’t matter as much honestly, but mining pushes the memory hard. Use a program like HWinfo to monitor tour memory modules junction temp before and after swapping the pads.
Hey - can you list the quantity and links for the pads used?
buy thermalright