What's Inside a Quest Velomobile? 🤔
ฝัง
- เผยแพร่เมื่อ 18 ก.พ. 2019
- Quick look at what's inside a Carbon Quest velomobile made by Velomobiel.nl.
en.velomobiel.nl
How and why I cut the Quest in half: • I Cut My Velomobile in...
Thanks for watching! Please subscribe: th-cam.com/users/saukki86?sub_...
My shop with velomobile & recumbent T-Shirts & more: www.saukki.com/shop
My bikes:
Velomobiel.nl Quest Carbon: en.velomobiel.nl
Azub Max: www.azub.eu
My blog: www.saukki.com
Twitter: / saukkico
Instagram: / saukkico
#saukki #velomobile #whatsinside - กีฬา
Thank you for sharing this video. I'm currently building for my own and I was stuck around the structural, internal designe. It clears my mind really well.
Saukki, So glad you were unafraid to open it up! I comment on your videos only occasionally because my wife and I always watch your channel on TV rather than the computer, but I had to for this one! You have provided a better view of the interior of a velomobile than I've seen anywhere else, and I've seen a LOT of velomobile videos (and stills) while doing research for my homebuilt (which is finally finished after 2 years and 3 months). Thank you for another great, informative video!!
2 years and 3 months. lol. I know exactly what that is like... No. I have not finished yet and it already seems like 2yrs 3mths.
Attachments are done with windshield adhesive. Dow chemical w.a. on ebay/$10. Also get the primer that comes with it. Use on anything shop or home too. Theo told me years ago.
Thank you! Unobstracted view on the inner workings! That is a dream come true! What a wonderful sight.
Eycept for the dirt ;) but that way we see, that you are really using it!
I hope you'll get new clamps soon" And hopefully by then the weather clears up so it is time to ride again :)
Very nice getting such a good view inside your velomobile
this was the first time I heard or seen some thing like this. This is really cool
A Fab upload. Thanks Saukki. Would have been nice to see the access to the steering parts, but that may be on another video yet to find. :)
Thanks Saukki, a very good vlog. J.
wow amazing video. can you please show how the steering works? I guess it is is hidden underneath? I want to buy the joystick steering collumn. that looks great!
Great vid. Mine crank base lil’ longer, i put 4 clamps on my crank base. Re-up w/theo.
Instead of sealing it up again with silicone. Maybe get a then rubber lining to use as a Sealer. Then you can easily access inside but just unbolting. But I’m not sure if that would give enough stiffness to the velo as silicone might.
The new design on the bottom bracket clamps is much better.
Its rely interesting to see interior like this, thanks Saukki . Can you make some noise testing with different roads, or maybe some other way. Perhaps comparison with trike, if its possible?
Did you put it back together again? What if you had 2 long zippers a long the sides that is designed to hold the top piece down to the bottom parts, and then there could be some "teeth" (bolts with no nut) to prevent the top from moving back/forward and to the sides?
Could you tell us what the specifics on the gearing is? like how manny front and rear and the sizes of the cogs? Thanks.
I have change the clamps at the crank with stainless steel
Can you send me a link where I can buy a pair? I am also wanting to upgrade to a larger chain ring.
th-cam.com/video/tbDiASTRaow/w-d-xo.html By turning the small bolt in the blue block, brightness can be adjusted (on the switch low light setting).
Cool to see the guts of the quest.! I always wondered how the bell was set up.
Will the Quest be one or two colored after top part is painted?
Same color than before. We are going to paint only the spot with the crack.
Does the velomobile itself comes with the racing hood?
Not this one. You have to buy it separately.
My clamp is broken too. Can you tell me how to get a new one?
Just contact Velomobiel.nl. They will sell you new one.
00:04 WELCOME TO THE HYDRAULIC PRESS Channel
Upgrade the bell to a truck air horn! :D
Saukki, how much does your Quest velomobile weigh?
In race condition with the racing hood it’s about 32 kg.
@@TheVelomobileChannel So are most of the bolts used in the construction made of steel or alloy or titanium? If they are steel, have you considered replacing critical ones with titanium and less critical ones with alloy?
combien pèse un machine comme ça 🤔
Personally for several thousand Euro's, Pounds I would want far more comfort and specs. What happens if they get competition who give that at lower prices, they'll be blown out of the water; I'm not sure how much that cost to make accounting for labour and materials but I reckon a Chinese guy will be working it out right now, because if I were them, I would be.
can I ask a question
Please do
@@TheVelomobileChannel is there a to put a blue tooth speaker in it for music or a gps
Nathan Lutz yes, I do use a JBL Flip 3 bluetooth speaker inside my Quest. I just have to turn the volune up to almost max, because there is quite a bit of noise inside the velomobile. For gps I use Wahoo Elemnt Bolt bike computer.
ite alan koulussa tekeen pitkänä projektina 4 pyöräistä pyörää
Kannattaa lueskella nojapyorafoorumi.fi rakenteluosiosta vinkkejä esim eturipustusten tekoon, niin saat heti ohjausgeometrian oikein. 😉
@@TheVelomobileChannel juu suunnittelin jo ohjausta on mulla kuitenki pyörien teosta kokemusta👍👍👍👍👍
Goofy ahhhh car