Refilling Camping Gas Canisters - 5 Essential safety tips

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ม.ค. 2025

ความคิดเห็น • 24

  • @nazaninnaderi3783
    @nazaninnaderi3783 4 หลายเดือนก่อน +2

    One of the absolute best informative videos on refilling gas canisters. Specially the part about vapor pressure of different gas types.

  • @yonallb
    @yonallb 11 หลายเดือนก่อน +7

    Best video on refilling canisters I have found. Than you for making this.

  • @DavidDoyleOutdoors
    @DavidDoyleOutdoors ปีที่แล้ว +13

    Good video. I would add the follow if you want to be really safe
    1. Don’t refill to more than 80% capacity, especially the larger size canisters
    2. After refilling, submerge into water to check for leaks, make sure it’s dry before using again.
    3. Mark RI, RII, RIII etc with each refill, I limit mine to 10 refills
    4. Don’t put a winter blend gas into a canister for a regular blend. Winter blends have more propane

    • @bigskies2202
      @bigskies2202  ปีที่แล้ว +1

      Great tips thanks @DavidDoyleOutdoors

    • @crazysquirrel9425
      @crazysquirrel9425 ปีที่แล้ว

      I have not seen a winter blend (specifically labelled that way) in the USA.
      All blends sold in stores are butane/propane blend.

    • @DavidDoyleOutdoors
      @DavidDoyleOutdoors ปีที่แล้ว +1

      @@crazysquirrel9425 they’re not labelled as winter blend but are designed for lower temperatures by using a higher percentage of propane and sometimes replacing the butane with isobutane, for example Coleman Xtreme which can operate at -27C, but these blends will have higher pressures, so it’s important to refill the right type of canister

    • @MG-bs5mr
      @MG-bs5mr 6 หลายเดือนก่อน +2

      ​@@DavidDoyleOutdoorsI'm going to try refilling a 70/30 cannister with a 60/40 cannister (funnily enough the Coleman one you mentioned).
      I'm only going to refill it to 80% though.
      That's a really good idea re submerging it in water.

  • @bigpapanoodle
    @bigpapanoodle 4 หลายเดือนก่อน +1

    As a newbie to refilling gas canisters I found this video to be a very helpful approach to staying safe. Not going to attempt it until well versed in the subject.

  • @helenrandle6868
    @helenrandle6868 7 หลายเดือนก่อน +4

    Really helpful video, thank you

  • @easabhal
    @easabhal 8 หลายเดือนก่อน +5

    Useful info, many thanks

  • @ivankiss3207
    @ivankiss3207 4 หลายเดือนก่อน +1

    7:10 A few drops of WD 40 in the creases of the can to prevent rust.

    • @bigskies2202
      @bigskies2202  4 หลายเดือนก่อน

      Good shout thanks Ivan. I like to give the tools a drop but never really.thought about it for the canister stored in the shed!

  • @andrewdouglas5020
    @andrewdouglas5020 ปีที่แล้ว +2

    Thanks for the advice point worth making and noted👍👍👍

    • @bigskies2202
      @bigskies2202  ปีที่แล้ว

      Thanks Andrew. Yes, I did read some forum posts out there offering dodgy advice on this such as pure propane refills, so I thought so.

  • @andrewvickers4487
    @andrewvickers4487 ปีที่แล้ว +2

    Great video thank you

  • @JoshuaJohnsonOutdoors
    @JoshuaJohnsonOutdoors ปีที่แล้ว +1

    Nice video Big Skies - I really like the graph you made, showing vapour pressure vs temperature. I'm guessing you have some sort of technical background? Cheers.

    • @bigskies2202
      @bigskies2202  ปีที่แล้ว +1

      Thanks Joshua. Yes, I think that really illustrates the significant rise in pressure with heat. Definitely something to be aware of. As for technical background I dabble a bit in anything and everything!

    • @JoshuaJohnsonOutdoors
      @JoshuaJohnsonOutdoors ปีที่แล้ว

      @@bigskies2202 I was thinking about doing an experiment video, intentionally trying to explode a canister in an overheat scenario (safety precautions in place obviously). I've made some content somewhat similar to your own video in the past. I actually found your's on the stovaholics fb group.

    • @bigskies2202
      @bigskies2202  ปีที่แล้ว

      I will watch with interest. Stay safe!!

  • @MG-bs5mr
    @MG-bs5mr 6 หลายเดือนก่อน

    Thanks for the great video but I have a quandary.
    Can I refill a 70/30 cannister from a 60/40 cannister?

    • @bigskies2202
      @bigskies2202  6 หลายเดือนก่อน +1

      I couldn't say for sure and wouldn't want to open myself up to guarantees. However the vapour pressure of 60/40 versus 70/30 is going to be something like 10% higher at normal temps. Given the operating range of temperatures the canister is designed for will almost certainly have some leeway I suspect you would be fine with a canister in good condition but would have to make your own judgement. A check on the gross weight of the canisters will give an idea on how much steel is in them. I.e. are the 60/40 built heavier.

    • @MG-bs5mr
      @MG-bs5mr 6 หลายเดือนก่อน +1

      @@bigskies2202
      Thanks for your reply.
      No worries, I wouldn't hold you to anything 👍
      Strangely the 60/40 gross weight is 351g whereas the 70/30 one is 381g.
      I'm in Scotland so it's likely I wouldn't be subjecting it to relatively high temperatures.
      The 70/30 cannister I'd be refilling is practically brand new, I purchased it last year.
      I think I'll give it a shot but maybe only try filling the 70/30 cannister to approximately 80% the first time.
      Thanks again for your response 👍

  • @aspmos
    @aspmos ปีที่แล้ว

    safety advice with rusty canisters?

    • @bigskies2202
      @bigskies2202  ปีที่แล้ว +1

      Hi Aspmos. Absolutely an important point which is specifically addressed as point #4. 7:00.