I would only use this amp at 4 ohm more than likely. It draws low amps until you open the resistance up below 4. So on a factory setup (battery and alternator) this would work well at 4ohm without having to upgrade
have had one for 6 months mxd8000.2 it is rated for 2 ohms stable. ran it at half an ohm and guess what, it didnt blow. theyre a awesome amp i think a big part of them failing is heat, they use a lower heat solder that fails when the amp is around 200 degrees, if youre running a amp up to that temp any amp will fail.
Taramps got Bass nobs almost 1 year all ready they sold desperate but they do have in fact they got 2 models one to control all the setup of the amp and the single one
have had one for 6 months mxd8000.2 it is rated for 2 ohms stable. ran it at half an ohm and guess what, it didnt blow. theyre a awesome amp i think a big part of them failing is heat, they use a lower heat solder that fails when the amp is around 200 degrees, if youre running a amp up to that temp any amp will fail.
I haven’t heard of any failures on them so far. And they take the dyno beating like a champ. Better than a lot of other brands fullbridges. All the guys I know running them love them.
Marts is just a brand. Some of the amps are made in Brazil and others in China. The one in the video is Chinese just like sundown fullbridge ones. The Brazilian ones are made by powerus, or uses powerus board design, those are some of the best amplifiers ever to graze the market. Now the Chinese fullbridge are known to be problems because they use lower quality internals. Sundown, b2, marts, ds18 and allot of companies get bad rep from those Chinese boards.
Can u do a review with the 12.6 volt ratings?...i have a 19 fusion with a 130amp altenator i just did the big 3 and ran 0 gauge ct sounds wire im having trouble deciding on the amp i want to go with i been looking at this amp its gonna be pushing 2 12 inch american bass xr 12s
Another great review, and marts V2 has some major changes for the win!!!!
When will you get this back in stock?
I’m running a Marts mxd3000.1 v2 thing hits hard only been running for a few days love it so far will give up date down the road
$50 bass knob only 200 is the amp. Impressive amp and review thanks man 👍🤞
Thanks for watching!
Fantastic efficiency - I buy oversize and run at 4 or 2 ohms for max efficiency.
The amp doing 90% at 4ohm is exactly what you want to see. impedience rise will keep it around 4ohm anyway. Perfect for 1000w rms subwoofer
Very nice move with the bass knob. Amazing how so few components can make 3k watts 👌
I would only use this amp at 4 ohm more than likely. It draws low amps until you open the resistance up below 4.
So on a factory setup (battery and alternator) this would work well at 4ohm without having to upgrade
Just so u know, here in the US we can open our electronics without voiding warranties. It's a major misconception they want us to believe lol.
Any amp?
All the Brazilian amps need way way better controls for the gain and crossovers all of those should be metal and way better quality.
You should do a Trinity audio 3k or even better the 1500.8
Wish we had them in norway. Shipping and vat to norway is expensive as fuck...
really love that bassknob and size.
Be cool to see v1 13500 dyno
I was gonna get a 13500 from them but seen to many of their amps fail ended up with a old crescendo 12k for about the same money
have had one for 6 months mxd8000.2 it is rated for 2 ohms stable. ran it at half an ohm and guess what, it didnt blow. theyre a awesome amp i think a big part of them failing is heat, they use a lower heat solder that fails when the amp is around 200 degrees, if youre running a amp up to that temp any amp will fail.
I know a lot of guys running them with no issues.
Taramps got Bass nobs almost 1 year all ready they sold desperate but they do have in fact they got 2 models one to control all the setup of the amp and the single one
Powerus makes the best full bridge Brazilian by a lot no 1 compares to powerus they glue everything down inside and way over build their amps
Seen to many of these marts amps fail. There all a hard pass for me
Nice grammar! SMH
Prove it!
have had one for 6 months mxd8000.2 it is rated for 2 ohms stable. ran it at half an ohm and guess what, it didnt blow. theyre a awesome amp i think a big part of them failing is heat, they use a lower heat solder that fails when the amp is around 200 degrees, if youre running a amp up to that temp any amp will fail.
I haven’t heard of any failures on them so far. And they take the dyno beating like a champ. Better than a lot of other brands fullbridges. All the guys I know running them love them.
Marts is just a brand. Some of the amps are made in Brazil and others in China. The one in the video is Chinese just like sundown fullbridge ones. The Brazilian ones are made by powerus, or uses powerus board design, those are some of the best amplifiers ever to graze the market. Now the Chinese fullbridge are known to be problems because they use lower quality internals. Sundown, b2, marts, ds18 and allot of companies get bad rep from those Chinese boards.
I had this amp for 2 days and it is stuck in protect mode. With just the positive negative and rem hooked up goes into protection.
Can u do a review with the 12.6 volt ratings?...i have a 19 fusion with a 130amp altenator i just did the big 3 and ran 0 gauge ct sounds wire im having trouble deciding on the amp i want to go with i been looking at this amp its gonna be pushing 2 12 inch american bass xr 12s
Thank you
Most of these amps are similar layouts audio pipe , sundown, and few more
Great video. Lol😂 break the seal
I got one
I’m really thinking about going with Marts Over Taramps !!!
They are solid amps
marts invented taramps but they separate i switch to marts from taramps and m very happy on decision
👍👍👍...
👍👍
I hate to say , but these amps are crap mine last 20 mins before it died. Bought a cheaper amp off amazon and been happy ever since
this is your bad luck. Sorry to say
What amp you get ????
This is a bad sound digital knockoff they use the bottom of the barrel cheapest of the cheap parts for these