Pawel, could you please make a video about those confusing servo numbers? I always spend most of time configuring servos and always do it mostly by experimenting and guessing. Thanks!
@@kermetsShared timer is related to FC board, so nothing can be done by software unfortunately. For me the most confusing part is S- outputs vs Servo number vs servo order numbers. Sure there is a reason for it, but video tutorial would be helpful :)
I understand everything but one, I have an omnibus f7 v2 controller. To what pin on the PCB do I have to connect the servo if it wants to use it as a load drop mechanism, controlled by a switch, or as a lighting switch. I know that you can probably use a pin for LED, but can I use, for example, pins to communicate with GPS? or some other?
Hi there I am using a hglrc f722 fc for I nav I would like to change the mixture output as motor output comming on s7 and s8 how to do mixer remapping?
Would it be possible to use inav to output servo movement based off a telemetry value? I would like to make a scale instrument panel that uses servos in the instruments to move based off of altitude, speed, and vario. I wonder if it's possible
@@FPVUniversity How can i do that? I am trying to use a RC channel to move a mechanism controlled by an external ESP32 board and i have only the UART port to communicate.
Pablo man, I have an S1100 running F405 Wing. I have both motors counter rotating. Also have 150+ MPH. I need to know how to use differential thrust. PLEASE link me a video or somehow I can figure this out. Thanks! Your the best!
How about a tutorial on how to add satellite view to iNav mission planning (waypoints), I fly in an area where there are no indicated roads but Sat. view would allow planning. I have tried and no success other then I have a Bing license.
This is something that needs more attention in iNav...... So S4 is connected to Servo mixer 6 which will control Channel 8.....wtf we need to start at servo 1 not "0" and maybe put the motor outputs on a different line I guess you cant do this if you have a REAL plane using four servos and only four outputs like omnibus F4? Cheers....Merry Christmas Happy New Year
Its the computerised world where things start at "0" and even the Omnibus F4, has 6 (six) servo outputs, at least my pro/V3 , pwm5 & 6 .....( not soldered the pins?) But I use S5&S6_SS and no servos.
Thanks for another tutorials! I literally had to deal with this yesterday, and now I wish I waited.
👑
Pawel, could you please make a video about those confusing servo numbers? I always spend most of time configuring servos and always do it mostly by experimenting and guessing. Thanks!
yes I agree servo output should start at "1" not "0"
and be great if you could use the unused motor output for servo ?
@@kermets this for unused motor output is usualy not possible due to hardware limitations, timers
Thanks yes I did hear that and wonder if it was still the case....
@@kermetsShared timer is related to FC board, so nothing can be done by software unfortunately. For me the most confusing part is S- outputs vs Servo number vs servo order numbers. Sure there is a reason for it, but video tutorial would be helpful :)
This is well... complicated topic. Next Configurator release will fix it a little but it is as it is
Fantastic, Pawel! Thanks a lot! 😃
It's going to help me a lot!
Ty 4 explaining so well and quickly I didn't know what CH forwarding was/did ima noon with FC soft ware
I understand everything but one, I have an omnibus f7 v2 controller. To what pin on the PCB do I have to connect the servo if it wants to use it as a load drop mechanism, controlled by a switch, or as a lighting switch. I know that you can probably use a pin for LED, but can I use, for example, pins to communicate with GPS? or some other?
But what is the physical pad connected to s4? How do I cross check that before I plug in the servo... Don't wanna fry it 🤔
In inav configurator software by clicking mixer icon But what about the rc throttle to able to control motor by using your transmitter please
Hello. Why my signal from ts16s to inav (matek f411-wse) is discret. For example: 1000, 1275, 1425, 1500, 1575, ... How can I fix it?
Hi there I am using a hglrc f722 fc for I nav I would like to change the mixture output as motor output comming on s7 and s8 how to do mixer remapping?
Would it be possible to use inav to output servo movement based off a telemetry value? I would like to make a scale instrument panel that uses servos in the instruments to move based off of altitude, speed, and vario. I wonder if it's possible
You can use Programming framework for that. Use Logic Conditions to set GVAR to value based on telemetry and assign GVAR to servo output.
@@FPVUniversity Thanks for such a timely response! Greatly appreciated! I'll try it this weekend. Can't wait!
how did you set 25 as a motor function pls tell me how
im trying to set a arm switch and my motor server is pluged on s5 not s1 for motor. how do i switch s1 motor to s5 for motor
Excellent
Can I forward stuff to UART?
You can output SBUS stream for all servos on an uart, yes
@@FPVUniversity How can i do that? I am trying to use a RC channel to move a mechanism controlled by an external ESP32 board and i have only the UART port to communicate.
Nice video but I have an issue , i can t assign a servo to output 2 like in your video even if I m deleting the second motor. Can someone help me ?
Pablo man, I have an S1100 running F405 Wing. I have both motors counter rotating. Also have 150+ MPH. I need to know how to use differential thrust. PLEASE link me a video or somehow I can figure this out. Thanks! Your the best!
How about a tutorial on how to add satellite view to iNav mission planning (waypoints), I fly in an area where there are no indicated roads but Sat. view would allow planning. I have tried and no success other then I have a Bing license.
Thanks For The Info.
100👍 thanks 👊👊💪💪
This is something that needs more attention in iNav......
So S4 is connected to Servo mixer 6 which will control Channel 8.....wtf
we need to start at servo 1 not "0"
and maybe put the motor outputs on a different line
I guess you cant do this if you have a REAL plane using four servos and only four outputs like omnibus F4?
Cheers....Merry Christmas Happy New Year
Its the computerised world where things start at "0" and even the Omnibus F4, has 6 (six) servo outputs, at least my pro/V3 , pwm5 & 6 .....( not soldered the pins?)
But I use S5&S6_SS and no servos.