iNav Auto Launch 🤖🛫 How to and Demo of Procedure
ฝัง
- เผยแพร่เมื่อ 25 พ.ค. 2020
- 🔥 🔥 🔥 🔥 FULL SETUP AND LINKS IN DESCRIPTION BELOW ⬇️ ⬇️ ⬇️ (Click 'SHOW MORE'👈🏻 )
A quick and simple guide and demo of how I configure use AutoLaunch in iNav. These settings with very minor adjustments have worked with a 100% success rate on 5 different models, which all varied in shape, size and weight. Both wings in this video are running iNav version 2.4.0
********* IMPORTANT: Please pay attention to the prerequisites detailed at 3:00 **************
ZCon iNav Diff ► tiny.cc/ZConDiff
AR Wing Diff ► tiny.cc/AR900Diff
Build Log of ZCon on my FB page here ► tiny.cc/ZConBuild
☕️ 👋🏻 Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :) ► tiny.cc/BuyAdamGaCoffee
🔵 Follow me on my Facebook page for updates, build logs, chat, random pictures & vid clips that don't make it to TH-cam: / adamgdoesfpv
📷 Follow me on Instagram @adamgdoesfpv ► tiny.cc/AdamGonInstagram
Sites I get my awesome FPV goodies from:
✅ Banggood ► tiny.cc/BanggoodFPV
✅ RMRC ► tiny.cc/RMRC
✅ AtomRC ► tiny.cc/Atom-RC (Use coupon 'AdamGdoesFPV' for $10 off)
✅ Amazon ► tiny.cc/Amazon-FPV
✅ HobbyKing ► tiny.cc/HobbyKing
========AR Wing Setup========
In the Air:
-AR Wing - Kit (version I have) ► tiny.cc/ARwingKit
-AR Wing - PNP with electronics and ply winglets (version I don't have) ► tiny.cc/ARwingPNP
-FPV cam (16:9) ► tiny.cc/62gv0y
-2200kv motor ► tiny.cc/t4gv0y
-6x4 prop ► tiny.cc/u5gv0y
-RC Timer 30a ESC ►tiny.cc/rfiv0y
-3S 4000mAh Multistar 10c ► USA link: amzn.to/2zsMtYQ - UK link: amzn.to/2ypGDat
-Matek F405 FC ► tiny.cc/F405
-8M M8N GPS ► tiny.cc/wwyh7y
-FrSky Rx ► tiny.cc/ubl96y
-5.8ghz Video transmitter ► tiny.cc/3wiv0y
-Rear LED's ► tiny.cc/wxiv0y
-Foxeer Lillipop Vtx Antenna ► tiny.cc/Lollipop5g8
-HD Camera, Runcam 2 ► tiny.cc/k4cv0y
On the Ground:
-Taranis ► tiny.cc/f6cv0y
-Eachine Diversity Monitor with DVR ►tiny.cc/ehfv0y
-Foxeer 5.8 antenna ► tiny.cc/Foxeer5g8antenna
-VAS 5.8g Pepperbox ► tiny.cc/VAS5g8Pepperbox
========ZCon Setup========
In the Air:
-56" Ritewing ZCon ► Only available if you email Chris at Ritewing directly: ritewing@hotmail.com The ZCon is the same kit as the Recon but with extended wings. You can check out the Recon here: tiny.cc/RWRecon
-Matek F765 Flight controller (Running iNav) ► tiny.cc/F765
-Badass 2826 1030kv motor ► tiny.cc/Badass-2876-1030kv
-Hitec HS225MG Servos ► tiny.cc/iiww8y
-Predator 4 FPV cam ► Discontinued. New Favourite FPV cam = tiny.cc/Ratel-2
-9x6E APC prop ► tiny.cc/9x6APC
-Hobbywing 80a ESC ► tiny.cc/80aESC
-Tiny GPS Rx ► tiny.cc/220GPS
-1.2ghz Video Transmitter ► tiny.cc/kwcv0y
-1.2g Video antenna buried in wing ► tiny.cc/SideFeedAntenna
-Dragonlink Micro RX ► tiny.cc/DragonLinkRx
-2 x 4,000mAh 5S in parallel ► tiny.cc/5S-lipo
-DJI Osmo Action HD camera (1080 60 with RS on) ► tiny.cc/DJIosmoAction
-Sandisk 64gb V30 Micro SD ► UK Link: tiny.cc/SanDiskV30UK - USA Link: tiny.cc/SanDiskV30USA
-Rear LED's ► tiny.cc/Orange12vLED
On me:
-Taranis Transmitter ► tiny.cc/f6cv0y
-Dragon Link V3 tx ► tiny.cc/DragonLinkV3tx
-SRH771 diamond antenna ► USA link: amzn.to/2gG50ZU -
UK link: amzn.to/2yiHpZo
-Fatshark goggles ► tiny.cc/o7cv0y
-FuriousFPV True-D Rx module ► tiny.cc/n9cv0y
On my Groundstation:
-K&F Concept Tripod ► 🇺🇸USA Link: tiny.cc/GS-Tripod-USA 🇬🇧UK Link: tiny.cc/GS-Tripod-UK
-1.2 ghz VAS Pepperbox antenna ► tiny.cc/6adv0y
-Singularity CP Antenna 1.2g ► tiny.cc/SingularityCP
-2 x RMRC 1.2ghz VRx ► tiny.cc/hbdv0y
-Eachine Diversity Monitor with DVR ► tiny.cc/ehfv0y
-Diversity Demon ► tiny.cc/ubdv0y
-DVR ► tiny.cc/9cdv0y
-Turnigy 5000mAh 3S ► tiny.cc/2ddv0y
-25mw 5.8ghz repeater vtx (to send the video signal wirelessly from my 1.2ghz ground station to my goggles) ► tiny.cc/cedv0y
-Digital Volt Meter ► tiny.cc/gfdv0y - บันเทิง
Wow, that massive ZCon launch was super smooth
Yes I love this wing! it's a beast
Thanks Adam, I appreciate when one of the hobby masters shows in detail how it works behind the curtain!
Thanks I appreciate your kind feedback :)
Note: Please remember that these are the settings that have worked for me on many different planes/wings... but this doesn't mean they will be suitable for every plane out there. For further information on the LAUNCH mode parameters, please check out the iNav Wiki CLI page here: github.com/iNavFlight/inav/blob/master/docs/Settings.md do a cmd/ctrl + F and search the term "Launch". TIP: Go into the CLI tab on your configurator and type "get Launch" and it will display all of your current launch settings and the allowed value ranges. I understand there are many different ways we can and do use this mode and its mostly down to personal preference. I hope this guide helps you achieve easy stress free launching :)
Love all your videos! You definitely don’t get as much attention as you deserve! Please keep it up!
Thanks Jonny, I appreciate the feedback :)
No you are no a inav expert, but you save my plane 100%.
Haha glad to hear it 😄
Thank you man for the simple and to the point tutorial
Thanks for watching and commenting.
Exactly what I was looking for. Thank you!
Glad I could help!
Great video Adam, extremely helpful for anyone wanting to get their autolaunch working successfully with a wing. :-)
Cheers! Hope it helps people out :)
Wow man! What a brilliant video! Thanks very much for sharing this!!!
Glad you enjoyed it! Thanks for watching :)
Adam, great tutorial and overall video look. Always awesome.
Thanks :D
Great video. I have been tearing my hair out trying to figure out why my auto launch was not work and watched your video to see that you have to have your launch idle at 0. I am so excited to take my AR Pro for its maiden. Thank you!
Glad it helped. Good luck with the maiden
That's a useful little explanation of autolaunch and basic settings there, cheers! I'm normally a Vector man, but I have bought a F705 a couple of months ago to try in a mini Talon. Maybe now's the time!
I've grown to really like iNav now... so much that I even consider taking out my expensive APs to replace them with Matek boards :-0 Good luck with it :)
Busy with a similar build and love the content.
Thanks again Pete!
Thanks, another excellent tutorial video from you.
Thanks :) hope you find it useful!
Super cool video, thanks for sharing your knowledge mate 👍
You’re welcome. Thanks for watching and commenting 😃👍🏻
Awesome lil tutorial, thanks for sharing!
Thanks for the comment, glad you found it useful!
This is just the video I needed. Almost finished with my flying wing build
Thanks and good luck with the maiden and AutoLaunch :D
@@AdamGdoesFPV thanks mate. It's my first ever model... just hoping it doesn't crash!
Just brilliant 👌 Adam so clear easy going to have no problems now thanks to you.🏆🏆👍 Big wing looks awsome.
Thanks for the feedback Pete :D the big wing is possibly my favourite plane right now!
@@AdamGdoesFPV been looking at the one you got but not shore on postage and stuff are you Instagram at all.
Depends where you’re based. Postage was about $50 to Ireland I think. Not on Instagram but have been thinking about creating an account
Wow that was such a nice view at your launch spot!
Yeah I love this location! Up on a hill for great reception, mountains, rivers, lakes 😎
Thank you. Excellent work.
Thank you, I hope it helps you out!
today is my maiden on wing, hope all i learned from your videos works, thanks 👍
Good luck 👍🏻
Thanks. I needed this video.
Glad it was helpful! Thanks for the feedback :)
very clear information. two thumps up.
Glad it was helpful! Thanks
Thank you, Great tutorial.
Thanks for the feedback 🙌🏻
Thx great job. I needed this video.
Good to hear that it helps :D Cheers
I liked your setup. Soon I will launch my AR 900 Wing for the first time, I will tell you the results. Thank you very much!
Thanks and good luck 👍🏻
Thanks for exemplifying that !
You're welcome, hope it's helpful. Thanks for commenting
great informative video Adam.
Cheers mate 😁
Great video, Thanks
You're welcome :) Cheers
Thanks for the vid! Finally a nice and clear instructions of how to do it and how it should behave step-by-step. I was afraid I will need to throw it with motor spinning...
You're welcome! Glad it was helpful :)
awesome!!! very helpfull, thank you
Thanks :D glad it was useful!
that is so sick mate!
Thanks Brian :D
WOW VERRY NICE
Thanks 🤗
top vid pal testing on wing tomorrow
Good luck, I’m sure it will go well 👍🏻 cheers 😊
Adam G does FPV went well. Now just need to sort out the crossfire failsafeing on 500mw at 500m out
😱 that sounds like something’s very wrong. UHF should be 10km + without thinking about it.
Thanks for the video Adam, i learned more about auto launch. I have my own auto launch program set up on my radio (no flight controller) which works very similar to this. However, i recently purchased at F411wte for my Dart xl and decided to try Inav 5.1 Thank you
Enjoy 👍🏻 iNav adds to the fun of flying 😃
Great video - you are my inav inspiration I need to finally get my cov19 lock down project finished - Basil
Thanks and good luck with your project! :D
@@AdamGdoesFPV hey last weekend we had an FPV event - i was rippping it with my inav wing - thanks for these tips..
Interesting!
Thanks for watching :)
Thanks!
You're welcome!
Great video.
I started with inav 2 year's ago and have yet to use it.
I put it on FX 62 but then fitted to ar900 last year still not flown.
That’s a long time to wait for your first flight after installing it 😅 iNav actually works really well these days, it gets better the more you get to know it as it’s still not the most user friendly system out there
Auto launch is great for those of us that fly alone. I always had trouble throwing the wing or plane, then trying to grab the controller.
It’s one of the best features of having an FC
Great video Adam! I am building a (DJI) FPV plane with Inav. Works great!
Nice 👍Not tried DJI but I hear good things. For me it just won't cope with some of the routes I love to fly :(
Excuse me, is DJI building planes? That's new to me and I was waiting for it, DJI were already late for planes!. Thanks
@@dmctec5943 Haha... DJI and planes. Maybe after many years. I use a DJI FPV HD system on a Extra 300 ans a Tundra V2 with heat tracking. Its realy great and a lot of fun.
@@Ard1400 WOW" That's top, very nice. Greetings
Great video..Please make a video also for mini talon setup or tutorial..
Hi and thanks for your comment. My Mini Talon is running a MFD Autopilot so it's not running iNav. Cheers
Thanks M8!
No problem! :)
Hi Adam,thank you for that video! It's so helpfull! Just one question-what stabilised mode do you using right after launch? Thank you a lot!
Thanks, glad it was useful 😃 I just use Angle mode for stabilisation. I switch to manual as soon as I have my goggles on and transmitter ready 👍🏻
Launching that Zcon looked tricky...thank God for Autolaunch....Works every time on my little Z84, I have a 30 second climbout...
Yeah the ZCon's not the easiest to grab hold of and because of that it feels super heavy! Autolaunch makes it an easy job though now. I guess the timeout is just personal choice, i just felt 5 seconds was a bit too short. Cheers
Great video. I used to have auto launch always on as well but have a bad habit of accidentally disarming the plane in the air.
Hi Sam, I'd be interested to know how having Autolaunch permanently enabled caused you a problem with your disarming in the air? Cheers
@@AdamGdoesFPV I wasn't able to re-arm. I was flying a C1 Chaser and gliding. I bumped the arm switch and tried to re-arm and nothing happened. I was over some trees next to a river and the only way I could get it to re-arm was to go into a dive over the river.
Sam S but having auto launch always enabled caused you an issue re arming?
@@AdamGdoesFPV Yup, when I disarmed it put it back into launch mode when I re-armed. The motor would not spin up. Once I put it into the dive I think it crossed acceleration needed to spin the motor for take off. After that it was fine and flew as normal. I wish I had the dvr from that flight but it was last fall/winter. Since then I have started putting launch mode on the momentary switch on my QX7 and it works good. Just hold the switch up, arm and then set the throttle position and then let go of the switch. If you arm but don't set the throttle position it will cancel launch mode.
Awesome video! Well explained parameters. Say if my plane is quite heavy, can i adjust the launch so its already at full throttle before i throw it? I doubt my Sonic Modell Binary will glide quite as nicley out of my hand thats all.
Thanks :) And yes you can configure the nav_fw_launch_idle_thr so that it throttles up to your desired level before you even throw it. Make sure you read about what this does and how to use it on this page here: github.com/iNavFlight/inav/blob/master/docs/Cli.md
Informative video. My AtomRC Swordfish is dipping the left wing durning auto launch. The first two fights it worked liked expected, but now the aircraft wants to roll to the left. I did have a couple of mishaps with the ground prior to the auto launch roll issue and wondering if that may have done something to the FC boards. May try and replace the FC. Thanks for the video!
Glad it was useful. I’d suggest check over the mechanical parts for damage or lose linkage etc first. Maybe worth re-flashing the FC before replacing it
I'm trying to setup a zohd dart 250 but my autolaunch just nosedives into the ground. The motor does spin up when I throw it but it just doesn't seem to move the servos. RTH and loiter work perfectly. It does seem rather nose heavy in manual mode, but it’s perfectly balanced.
Sounds like it’s either underpowered/too heavy or you’re not throwing it hard enough.
nice.. now my question is... if you need it to climb at a certain angle to clear obstacles, how would you do that? the place i fly from there's houses at the end of the field that I would obviously need to clear
You can set you climb angle by adjusting the following parameter in your CLI tab: nav_fw_launch_climb_angle the default is 18 degrees. If you increase this angle just make sure the throttle is high and that your plane is capable of this. Too high angle and not enough power could result in an instant stall. Hope this helps. Cheers
Thank you for providing your guide for us. Is there a link for the 3D print files you use to hold your flight controller?
Thanks for watching and commenting. I designed the F722 / F765 mount myself and you can find it here: tiny.cc/F722orF765mount. The F405 mount I found here: www.thingiverse.com/thing:3218887
@@AdamGdoesFPV Thank you
Great video as always Adam. Just installed my F722 into a Talon GT, no maiden yet, still waiting on bits from RMRC. Would any setting be different with a standard airplane (v-tail)? Complete newbie with iNav. Took me 1/2 day to learn how to arm the blinking thing. 😂 cheers again!
The launch settings don't need to be any different because it's a V tail. In fact the Talon GT is one of the models I used these settings on with 100% success. You can see it auto launch at the start of this video: th-cam.com/video/eaOTkcW53qQ/w-d-xo.html The general setup on the mixer tab is where you need to set it to V tail. Made really easy in iNav now as it's one of the standard templates. Cheers :)
Adam G does FPV , great to know, I did see the mixer setting for nano talon - v-tail , id imagine it’s the same setup. Thanks as ever for your reply, it’s very much appreciated as always! Cheers 🇮🇪
my first (ever) INAV auto launches will use two aircraft, the AtomRC Swordfish, and XFly A-10 Dual 50mm. Would "Your" settings do well with these aircraft? I'm concerned about the EDF motors. Should i ramp them up even higher for the launch?
Thats something you'll just need to have a guess at, all depends on how much power the plane has for it's size and weight. good luck :)
Best thing i ever put on my Ar900...Activate launch mode, set throttle just over half, slight wiggle to get motor going, then throw...what more could you want.
You should do it they way I demo in this video without the wing wiggle at the start. It’s simpler and also there are reasons why the wiggle can cause issues on launch 😊👍🏻 thanks for watching and commenting
At 5:32, it appears ACRO was the mode it entered after auto-launch completed. Is that the stabilized mode you set? Thanks. ( You mentioned angle mode but the screen showed ACRO).
Not sure if I just switched modes fairly quickly after the launch finished there but I normally set post launch mode to 'Angle' so that I can trust it will maintain altitude.
Hi all the trim have to be on center position or no
Yes. Using iNav you shouldn't use the trim adjustment on your transmitter like you would traditionally. You use Autotrim in flight for it to set the servo centre position. If you adjust the trim it could quite possibly prevent you from arming or cancel autolaunch as it will think you are moving your stick.
Do you like iNAV more than Ardupilot? I've never used either, so I'm not sure if iNAV is better for certain things versus Ardupilot.
Hi Nick, I think it's just a matter of opinion. I've not used Ardupilot so I cannot really compare them. The understanding I get is that Ardu is a fair bit harder to get your head around, less user friendly, but it appears people believe it's better performing and I believe it's more advanced in its functionality in some areas such as autonomous wp missions for example. iNav has come a long way since I first tried it over 2 years ago, back then I was a bit unsure, but now I've come to really like it and trust it. This is partly due to the introduction of the excellent Matek flight controllers which I highly recommend! Cheers
@@AdamGdoesFPV Yeah, I bought a Matek 765 for my Skyhunter, so I'm glad you recommend them. I'll be sure to revisit this review once I'm done with the rest of the build.
@@joslinnick The 765 is the best one too. I'm about to buy one for my next build :)
Hi, Adam. What is the buzzer specification you used. How is the config with the fc?
My question is because my beeper keep beeping all the time since I connect the battery
Hi, I never used a buzzer with iNav so can't help you on that one sorry.
Does your diff suitable for dart 250g?
I can't see why my launch settings wouldn't work on a Dart250
I'm using inav 5.1.0 and I'm having some difficulties configuring it. My name is Jesse and I speak from Brazil
Hi Jesse, I suggested some settings for you, default is mostly ok, just adjust the throttle values to suit your setup
Hello budy, how are you? Do you have any presets for the air wing pro?
Hi, default settings are pretty good. I'd increase the timeout to 10 seconds, set idle throttle to 50% and Launch throttle to around 85 if using PNP. This is if yours is an average weight
When I get a computer again ☕ Is on me !
Cheers, much appreciated
Hi Adam. Sorry to ask a dumb question but I'm in need of your help!. I have built a flying wing but I'm very tight on space inside the fuselage and have been forced to put the esc very close to the receiver and flight controller.
Is it bad practice to have the receiver, flight controller and receiver too close together? Do I need separation between all three of these ? ( esc, fc and receiver)
Is with those components I would have liked to keep the rx away from the ESC. It might not be an issue though, just see how it goes 👍🏻 if you put them this close together I guess there’s no other option. Must be a small wing?
@@AdamGdoesFPV it isnt too small. 1m span, but the inside compartment for mounting stuff is pretty small.
I'm running the dji digital fpv system , so the vtx and rx are in one unit. The system is commonly used in quads where things are crammed relatively close together so I'm hoping it will be ok....cant be sure
Ah that should be fine 👍🏻
I'm asking you to help me, have a problem with autolaunch. After steps : arm engine, put throttle to value after launch procedure - engine go at once to this value of throttle and not to idle. In my case this value is 1200. All other parameters are like in your case. Thanks for answer.
You need to set 'idle throttle' to 1000 so that it doesn't spin up when you move the throttle stick
What is stabilize mode on the iNav configuration
I use 'Angle'
Hi, I have the same settings on a tbs but I don't get the autolaunch display in my goggles only Hor or stab ??? I am using mates 405 v4. any ideas. Cheers wayne
Hi Wayne. Autolaunch text appears on the OSD item ‘System Message’. Check you have that configured on your osd and it’s not overlapping with other items.
@@AdamGdoesFPV Thanks Adam, I made a rooky mistake , i reflashed the board and this setting reset and i missed it lol.Thanks
Hi
I think I'm doing something wrong regarding info from 4:46
I get this when trying to set 0:
# set nav_fw_launch_idle_thr = 0
### ERROR: Invalid value. Allowed range: 1000 - 2000
Any advice?
Thank you
Sorry my text is not very clear, I mean 0 as in 0 throttle. For values in iNav CLI 0 throttle is 1,000. This is also the default value for this field. Hope this helps 👍🏻
Do you need to put reflex on the wing even on nav launch mode being active? Or the flaps should remain neutral on launch?
Hi, you should NOT add reflex to the wing for launch... doing so would in fact cancel launch mode. Nav Launch is designed to maintain an upward angle in degrees and adjusts the control surfaces automatically to active this. nav_fw_launch_climb_angle is set to a default of 18 degrees and I have not changed this in my settings. Just do what I did in the video and trust it ;-)
Adam G does FPV Thank you very much for your response. Highly appreciate the gesture.
Raffman 42 you’re welcome 😊👍🏻 good luck with your auto launch
Adam G does FPV Btw i forgot to ask you if you set manual for takeoff on auto launch or you were set to air mode?
Also what setting did you put on your PID Tuning in regards to Max Pitch Angle and Max Roll Angle values?
Thanks again Adam
@@raffman4266 My default mode is Manual and that was on when I use Auto Launch, and I don't activate air mode ever on any of my fixed wings. Everything that I have changed from default can be seen in my diff file here: tiny.cc/AR900Diff
Hi, I can't set nav_fw_ idle_ thr to 0, it says min is 1000. Does 1000 equal 0?
Yeah that wasn’t explained well by me. 1000 is 0 in iNav terms 👍🏻
hello sir..how to find sound pack for inav mode?
open-txu.org/amber-sound-pack/
any recommendation for sonic modell pro 1000
Honestly, most normal models launch well on stock settings. Maybe add some idle throttle to help with the initial throw. Good luck
@@AdamGdoesFPV i have done all that and idle or not it fucking sucks its too big of a model too be thrown . a quick bump start and throw works every time im done listening to people that shit cost me more then 6 props and 1 arwing pro. shake and over head throw works every time and now fucking up trim or you plane with do a back flip in auto launch!!
@@AdamGdoesFPV my sonic modell 600 work great with the shake and throw always has with stock settings too ... if it works dont change it! i have and it was not worth it!
do one for the Drak
Works on my mini Drak too. Just haven’t recorded a video of it 😊
well I put the same serrings on my AR900 and Nano Drak Wish me Luck
i shake and throw i change my settings im going to try and do 0 motor delay and motor idle up and a arm timer so i can throw out in front of me..... most of the time i throw over head and i shake then throw and it works just not and pretty
Much better to use idle instead of the shake method. You can even add idle delay too if you like, so when you move the throttle stick up to start launch, it can wait a number of seconds before the motors actually start the idle spin
@@AdamGdoesFPV i like the idle delay but like i said i did all this and the plane dose not like it when i throw and have it start! It has to be bumped and thrown at the same time and it works every time stock settings only 1600 for launch throttle
Is airspeed sensor necessary for inav auto launch
No not at all. It does absolutely nothing other than show as a data item on your OSD.
@@AdamGdoesFPV so if i dont have airspeed it will cause no problem rather than giving just speed data
And how does it know that it has been thrown in the air for auto launch
@@aesatishchaudhary5933 no because iNav doesn’t use it in any way at all. All it does is gives the pilot info. I have no airspeed 6 out of my current 7 iNav planes
@@aesatishchaudhary5933 Accelerometer. Nothing to do with airspeed
Nice review!
And as allways, very saturated and bright video!
Thanks :D Colours in Ireland for you, I even turn down the saturation on the FPV cam from default! Cheers
wow. no torque roll on launch. I need to have idle throttle quite high for my models not to spiral into the ground right away on auto launch
Have you tried launching without throttling you before the throw?
@@AdamGdoesFPV yeah, but it is quite heavy. maybe I should try it again now that it is trimmed out
👍👀🇭🇷
😁🛫
Inav auto Launch aka how to let dumb autopilot kill your plane 9 out of 10 times 🤣🤣
I’ve used auto launch on 15+ models hundreds of times. 100% success rate 👌🏻 if it’s killing your planes 9 times out of 10 you’re doing something very wrong.
That's brilliant! Was nervous about launching a big wing with this mode. But if you can launch the big Z with it, my behemoth should work as well.
This would probably be better than the bungee I am currently using
Far better than bungee... because it's just added kit to take to the field, more time setting up and packing away and you'd need more space. Autolaunch ftw!