Charlie Siete hey brother! Thought you would want to know if you select kid safe option for your videos it will cut off your comments section! Peace ✌🏻 My friend
I bought one in 1999 when the GT-3 first came out and it can sound thin but that depends on how you hook it up in your studio or amp setup,i still think this is a great floorboard! The clean amp models and some overdrives sound good but i use mine now just for the effects,i put it in the effects loop on my bugera 333 head and it sounds great and does not suck tone like other guitar processors do,i tried my korg ax1500g just for it's effects in my bugera effects loop and it really sucked the tone out of it and sounded dark and muddy,that being said the ax1500g sounds great in front of my bugera and also other amps for it's high gain amp model tones! The GT-3 is worth buying used if you still can find it,like i already said the GT-3 does not suck your tone in the effects loop of an amp and even enhances the high end a little bit,this i good if your amp is darker sounding but also good sounding in most amp's effects loop,I like the delay's and reverb's but the other effects also sound good.
WOW Charlie those are some amazing patches. Love these sounds. You rock and are an amazing player! keep it up dude. wow! GT-3 rocks! even after all this time :)
So glad to know that this video was useful for both of you! Remember that the sound of the preset depends on the kind of pickups you are using; for example: in all this videos i used a Strat with single coils and a very thin sound, so if you use humbuckers or active pickups maybe you'll have to modify certain parameters to get the best sound 👍
Thank you for this excellent demonstration. I have 2 questions to ask: (maybe you answer in the next episodes) Any way to emulate a pedal steel guitar ? Have you tried to use it it with a bass guitar ?
Hi Charlie... I asked this question once before ..and got and answer, but unfortunately did not have my setup to make bulk patch changes and at 67 can't remember how I did it before . Still have this wicked ole GT-3 Question is how/what method do I use to move these patches to the GT-3 once I have them downloaded to my harddrive. I have usb 3.0 as well as a midi in/out to usb cord...Much thanks , I have just about finished my all out custom soundroom I have been working on since 2006 or 7
@@Char7ie78 I went to a site "something forge" and D'L a program. I could access the box and mod some patches but could not do any backup of what was on the pedal board so could not put all the patches on it. I have not tried the original GT-3 editor yet but it is also downloadable.
You´re welcome! Yes, is posibble by following the instructions told in the page 68 of the user´s manual; you can read it here: static.roland.com/assets/media/pdf/GT-3_OM.pdf
Hey what was that patch/tone that you played for the very 1st 10 seconds before the main video portion started?! that was a killer sustaining lead tone that I have been searching for a LONG time. amazing!
Hello mate, I know this video was posted a long time ago and im still learning how to play and how to make the most out of my equipment, could you please please please make a nirvana overdrive preset and send me the specs pleasr
Ok, comprueba la ruedita de volumen que se encuentra en la parte trasera, y el volumen del master en el botoncito 'Master', y si no pues podría ser alguno de los cables que usas, comprueba que funcionen correctamente... Suerte!
PRESETS SPECIFICATIONS:
-- SOFT LEAD 2 --
COMP: FX Select: CS; Sustain 35; Attack 35; Tone 0; Level 45.
DELAY: Type: Single; DlyTime 360ms; DlyTime.F 360ms; Feedback 32; High Cut 3.00kHz; Effect Level 40.
OD/DS: Type: Natural OD; Drive 66; Bass +2; Treble -12; Level 45.
REVERB: Type: Plate; Rev Time 2.8s; Pre Delay 0ms; Low Cut 165Hz; High Cut 6.00kHz; Density 9; Effect Level 14.
PREAMP: Type: Clean TWIN; Volume 92; Bass 50; Middle 85; Treble 78; Presence 14; Master 36; Bright Off; Gain Low; Mic Set 3cm; Mic Level 100; Direct Level 0.
EQ: Low EQ 0dB; Lo-Mid f 630Hz; Lo-Mid Q 1; Lo-Mid EQ +1dB; Hi-Mid f 4.00kHz; Hi-Mid Q 2; Hi-Mid EQ +1dB; High EQ -1dB; Level +1dB.
MASTER: Level 100; BPM 63; Noise Sup. On; Threshold 65; Release 30; Foot Vol. Level 100.
PEDAL/ASSIGN: EXP PEDAL On; Target: DD-Effect Level; Min 15; Max 40; CTL PEDAL On; Target: OD-On/Off; Min Off; Max On; Source-Mode Toggle.
-- SOFT LEAD 3 --
COMP: FX Select: CS; Sustain 35; Attack 35; Tone 0; Level 45.
DELAY: Type: Single; DlyTime 380ms; DlyTime.F 380ms; Feedback 32; High Cut 3.00kHz; Effect Level 41.
OD/DS: Type: Turbo OD; Drive 2; Bass +2; Treble -15; Level 46.
REVERB: Type: Plate; Rev Time 2.8s; Pre Delay 0ms; Low Cut 165Hz; High Cut 6.00kHz; Density 9; Effect Level 14.
PREAMP: Type: Clean TWIN; Volume 92; Bass 48; Middle 86; Treble 70; Presence 4; Master 38; Bright Off; Gain Low; Mic Set 3cm; Mic Level 100; Direct Level 0.
EQ: Low EQ 0dB; Lo-Mid f 630Hz; Lo-Mid Q 1; Lo-Mid EQ +1dB; Hi-Mid f 4.00kHz; Hi-Mid Q 2; Hi-Mid EQ +1dB; High EQ -1dB; Level +1dB.
MASTER: Level 100; BPM 63; Noise Sup. On; Threshold 65; Release 30; Foot Vol. Level 100.
PEDAL/ASSIGN: EXP PEDAL On; Target: DD-Effect Level; Min 15; Max 41; CTL PEDAL On; Target: OD-On/Off; Min Off; Max On; Source-Mode Toggle.
-- BLUES LEAD 1 --
COMP: FX Select: CS; Sustain 36; Attack 36; Tone +4; Level 47.
DELAY: Type: Single; DlyTime 380ms; DlyTime.F 380ms; Feedback 28; High Cut 2.00kHz; Effect Level 41.
OD/DS: Type: Blues; Drive 15; Bass -3; Treble -2; Level 43.
REVERB: Type: Plate; Rev Time 2.2s; Pre Delay 21ms; Low Cut 165Hz; High Cut 3.00kHz; Density 9; Effect Level 17.
PREAMP: Type: Clean TWIN; Volume 93; Bass 45; Middle 90; Treble 71; Presence 13; Master 38; Bright On; Gain Low; Mic Set 3cm; Mic Level 100; Direct Level 0.
EQ: Low EQ 0dB; Lo-Mid f 630Hz; Lo-Mid Q 1; Lo-Mid EQ +1dB; Hi-Mid f 4.00kHz; Hi-Mid Q 2; Hi-Mid EQ +1dB; High EQ -1dB; Level +1dB.
MASTER: Level 100; BPM 120; Noise Sup. On; Threshold 40; Release 55; Foot Vol. Level 100.
PEDAL/ASSIGN: EXP PEDAL On; Target: PRE-Volume; Min 78; Max 93; CTL PEDAL On; Target: MANUAL-On/Off; Min Off; Max On; Source-Mode Toggle.
SFX: FX Select: TR; Mode: Tremolo; Wave Shape 50; Rate 76; Depth 53.
-- SHIMMER 1 --
MOD: FX Select: HR; Voice 1-Voice; HR1 Mode Mono; HR1 Pitch +12; HR1 Fine 0; HR1 PreDly 0ms; HR1 Feedback 39; HR1 Level 100; Direct Level 40.
COMP: FX Select: CS; Sustain 33; Attack 33; Tone +5; Level 50.
DELAY: Type: Single; DlyTime 520ms; DlyTime.F 520ms; Feedback 58; High Cut 3.00kHz; Effect Level 64.
REVERB: Type: Plate; Rev Time 6.3s; Pre Delay 6ms; Low Cut 165Hz; High Cut 4.00kHz; Density 9; Effect Level 89.
PREAMP: Type: JC-120; Volume 50; Bass 52; Middle 67; Treble 40; Presence 13; Master 54; Bright Off; Gain Middle; Mic Set 3cm; Mic Level 100; Direct Level 0.
MASTER: Level 100; BPM 120; Noise Sup. Off; Threshold 30; Release 50; Foot Vol. Level 100.
PEDAL/ASSIGN: EXP PEDAL On; Target: RV-Effect Level; Min 28; Max 89; CTL PEDAL On; Target: HR-HR1 Pitch; Min +12; Max +24; Source-Mode Normal; ASSIGN 1 On; Target: HR-HR1 Level; Min 100; Max 55; Source: CTL PEDAL; Mode Normal; Act.Range Lo 0; Act.Range Hi 127.
-- SHIMMER 2 --
MOD: FX Select: HR; Voice 1-Voice; HR1 Mode Mono; HR1 Pitch +12; HR1 Fine 0; HR1 PreDly 13ms; HR1 Feedback 1; HR1 Level 10; Direct Level 100.
COMP: FX Select: CS; Sustain 40; Attack 40; Tone +12; Level 50.
DELAY: Type: Single; DlyTime 520ms; DlyTime.F 520ms; Feedback 51; High Cut 3.00kHz; Effect Level 45.
REVERB: Type: Plate; Rev Time 6.1s; Pre Delay 6ms; Low Cut 165Hz; High Cut 3.00kHz; Density 9; Effect Level 56.
PREAMP: Type: JC-120; Volume 50; Bass 51; Middle 76; Treble 57; Presence 7; Master 51; Bright On; Gain Middle; Mic Set 3cm; Mic Level 100; Direct Level 0.
MASTER: Level 100; BPM 120; Noise Sup. Off; Threshold 30; Release 50; Foot Vol. Level 100.
PEDAL/ASSIGN: EXP PEDAL On; Target: RV-Effect Level; Min 20; Max 56.
Charlie Siete hey brother! Thought you would want to know if you select kid safe option for your videos it will cut off your comments section! Peace ✌🏻 My friend
I appreciate this video. I've had one since 2003, i'm about to dig it back out. Thanks.
Charlie, maestro.
¡Qué grandes patches creas para nuestro cacharro!
Sabes si habrá un tutorial de como usar bien este pedal o algún video donde lo expliquen?
yeah! just bought a second hand gt3. this videos are going to help me a lot, many thanks!!
I bought one in 1999 when the GT-3 first came out and it can sound thin but that depends on how you hook it up in your studio or amp setup,i still think this is a great floorboard! The clean amp models and some overdrives sound good but i use mine now just for the effects,i put it in the effects loop on my bugera 333 head and it sounds great and does not suck tone like other guitar processors do,i tried my korg ax1500g just for it's effects in my bugera effects loop and it really sucked the tone out of it and sounded dark and muddy,that being said the ax1500g sounds great in front of my bugera and also other amps for it's high gain amp model tones!
The GT-3 is worth buying used if you still can find it,like i already said the GT-3 does not suck your tone in the effects loop of an amp and even enhances the high end a little bit,this i good if your amp is darker sounding but also good sounding in most amp's effects loop,I like the delay's and reverb's but the other effects also sound good.
WOW Charlie those are some amazing patches. Love these sounds. You rock and are an amazing player! keep it up dude. wow! GT-3 rocks! even after all this time :)
So glad to know that this video was useful for both of you! Remember that the sound of the preset depends on the kind of pickups you are using; for example: in all this videos i used a Strat with single coils and a very thin sound, so if you use humbuckers or active pickups maybe you'll have to modify certain parameters to get the best sound 👍
I like shimmer 1 charlie thats wonderful
Now we are requesting you to try and make strings
Requesting from Zambia
Love ya
Thank you for this excellent demonstration.
I have 2 questions to ask:
(maybe you answer in the next episodes)
Any way to emulate a pedal steel guitar ?
Have you tried to use it it with a bass guitar ?
Hi..! I'm affraid that I have to answer 'no' to both questions, but thank you anyway for commenting!
@@Char7ie78 thank you, though.
I use this GT3 with a Kurzweil keyboard and it really improves significantly the sounds.
I had a Boss GT6-B for the bass so long ago, and it sounded pretty cool, but I ended up selling it because I didn't use it at all
Hi Charlie... I asked this question once before ..and got and answer, but unfortunately did not have my setup to make bulk patch changes and at 67 can't remember how I did it before . Still have this wicked ole GT-3
Question is how/what method do I use to move these patches to the GT-3 once I have them downloaded to my harddrive. I have usb 3.0 as well as a midi in/out to usb cord...Much thanks , I have just about finished my all out custom soundroom I have been working on since 2006 or 7
Hi.. that's by using some program like GT3 editor or something so
@@Char7ie78 I went to a site "something forge" and D'L a program. I could access the box and mod some patches but could not do any backup of what was on the pedal board so could not put all the patches on it. I have not tried the original GT-3 editor yet but it is also downloadable.
Give it a try, it should work
Hi, thanks for this video. One question, is there the possibility of resetting the pedalboard
You´re welcome! Yes, is posibble by following the instructions told in the page 68 of the user´s manual; you can read it here:
static.roland.com/assets/media/pdf/GT-3_OM.pdf
Charlie Siete his videos are helping me, the sound of my pedalboard has improved a lot. God bless you and thank you for this great contribution.🙏
My pleasure! 😊👍 it was just that my purpose: to help GT3 users in getting good and useful sounds from this awesome gear
Hey what was that patch/tone that you played for the very 1st 10 seconds before the main video portion started?! that was a killer sustaining lead tone that I have been searching for a LONG time. amazing!
Stephen Soukup Yep, sounds cool! It's Rock Lead 3, from the 3rd part video
Hello mate, I know this video was posted a long time ago and im still learning how to play and how to make the most out of my equipment, could you please please please make a nirvana overdrive preset and send me the specs pleasr
Impossible now, sorry.. but you could try to make it yourself taking videos like this as a reference:
th-cam.com/video/g0OviDFVGQY/w-d-xo.html
Me recomendarías comprar esta pedalera en 2022?
Depende del precio.. hay marcas económicas muy buenas hoy en día como Mooer o Nux
@@Char7ie78 150 usd. Por ese precio vale la pena?
@@vmp0001 pruébala si puedes, y si te gusta cómo suena, adelante..! El precio está bien
My gt3 bosspedal..everything works..but no sound output..?.no sound not even headphone jack..help please
Ok, comprueba la ruedita de volumen que se encuentra en la parte trasera, y el volumen del master en el botoncito 'Master', y si no pues podría ser alguno de los cables que usas, comprueba que funcionen correctamente... Suerte!
@@Char7ie78 racias..ya cheque.todo ese pedo..maybe elloo power supply I think..thanku
How do you transfer the patches to a unit?
With some program like GT3 Editor, you have to connect the unit to your PC via Midi/Usb