Thank you SO MUCH! I would never have figured this out. I just cleaned my coffee cup lid. It was so gross!!! And I cannot believe how well it works now. I’m sharing this!
The best cleaning video on TH-cam, I was almost discouraged buying a contigo mug after watching other cleaning videos as they tell you to remove the whole plastic mechanism and you have to mess around with tiny little springs, So glad I watch this and seen how simple it is to clean properly A+
This is a great tutorial! I was able to wash both of my lids in 5 minutes instead of "trying" to clean them without dissasembly in 30 minutes. Many thanks!
This is mind blowing! I have been cleaning everything but the air vent for years without knowing coffee gunk was still in there. It was almost completely blocked and not letting coffee out, until now!!! Thanks for your video!
Fantastic video. I used a water pik to blast out the vent and it somewhat worked. I watched this video and the vent was still clogged after using the waterpik. This is SO much better and easier.
Thanks for showing me how it comes apart. I was FINALLY able to get the rotten milk smell out of my mug. A couple of additional tips you might find helpful- 1: its a lot easier to get the rubber grommet onto the spring while you are pressing the plunger trigger. 2: My mug had a bunch of nasty crap under the lid lock button as well. I popped it off with a screw driver. I can't seem to get it to go back on... but its not necessary for the function of the device. And I prefer having a clean mug with no lock button to a dirty lockable mug.
Thanks for the video. I usually just use my air compressor to blow out the worse of the gunk and use a small toothbrush with soapy water. But taking that seal assembly apart will be much better.
Here in Japan they have kitchen bleach which is basically a more diluted version of the regular laundry bleach. After taking it apart as this video shows, just use the kitchen bleach and it really gets those difficult coffee stains off. Just let it soak for about an hour, give a bit of a rub with a brush, and then rinse thoroughly a few times. Great video btw.
Worked great. The only slight issue i have, is that after reassembly the button is ever so slightly more out so it can wiggle from side to side. Other than that seal is still great and working better than before cleaning
Ok hopeful this might work after seeing the comments. Was about to throw this thing out before I finally saw a video that appears to get into the details and makes sense.
You sir are my hero today. I've been trying to figure out how to disassemble this thing off and on for years, and especially the past couple of weeks as I noticed it felt clogged. After I got might apart, there was a couple of centimeters of nasty gunk on that shaft. It's all soaking in a mild bleach solution right now. Don't know why I didn't think to search for a TH-cam video sooner.
Seems easy. But I'll never be able to get it back together properly. The rubberband trick was worth it all though. Can't believe I'm so thick! Is there a way to get the little silicone "plug" that you open and close when you take a sip? I've managed to get a toothpick under it but there's more filth inside the under part where two two sides of silicone meet. Any ideas on that one?
I cannot thank you enough. You saved me a ton of time trying to figure out how to do this.
Thank you SO MUCH! I would never have figured this out. I just cleaned my coffee cup lid. It was so gross!!! And I cannot believe how well it works now. I’m sharing this!
The best cleaning video on TH-cam, I was almost discouraged buying a contigo mug after watching other cleaning videos as they tell you to remove the whole plastic mechanism and you have to mess around with tiny little springs, So glad I watch this and seen how simple it is to clean properly A+
This is a great tutorial! I was able to wash both of my lids in 5 minutes instead of "trying" to clean them without dissasembly in 30 minutes. Many thanks!
This is mind blowing! I have been cleaning everything but the air vent for years without knowing coffee gunk was still in there. It was almost completely blocked and not letting coffee out, until now!!! Thanks for your video!
I'm so grateful you made this video. Thank you so much.
Thank you.
Fantastic video. I used a water pik to blast out the vent and it somewhat worked. I watched this video and the vent was still clogged after using the waterpik. This is SO much better and easier.
Omg!!! Thank you!! Holy shit!!! The best video ever!!!!!! Fast and to the point!!!!
Thanks for showing me how it comes apart. I was FINALLY able to get the rotten milk smell out of my mug. A couple of additional tips you might find helpful-
1: its a lot easier to get the rubber grommet onto the spring while you are pressing the plunger trigger.
2: My mug had a bunch of nasty crap under the lid lock button as well. I popped it off with a screw driver. I can't seem to get it to go back on... but its not necessary for the function of the device. And I prefer having a clean mug with no lock button to a dirty lockable mug.
Thanks for the video. I usually just use my air compressor to blow out the worse of the gunk and use a small toothbrush with soapy water. But taking that seal assembly apart will be much better.
kudos to you for making this video, my cup was super clogged and its now clean and working great!
You just saved me like $60 dollars from having to replace 2 of mine becauseof this! Thanks for posting this! Great video.
Here in Japan they have kitchen bleach which is basically a more diluted version of the regular laundry bleach. After taking it apart as this video shows, just use the kitchen bleach and it really gets those difficult coffee stains off. Just let it soak for about an hour, give a bit of a rub with a brush, and then rinse thoroughly a few times. Great video btw.
Thanks for the walk through.
Thank you for taking a min to make this video, I've been trying to find a decent mug and have been a little discouraged by the cleaning, not anymore 😂
Fantastic!!!! Thank you sir!!
Omg 😱 this was the best video ever in how to clean my cup THANK YOU SOOOOO MUCH❤❤❤❤😊
95 seconds and nailed it! Well done!
REASSEMBLY?!?
Ahhh! So simple when you know how! Thank you
Thank you!
Worked great. The only slight issue i have, is that after reassembly the button is ever so slightly more out so it can wiggle from side to side. Other than that seal is still great and working better than before cleaning
This worked great! Thank you. My Contigo mug works great now!
Thank you!!!!!! This thing works like new. Bunch of yuck inside🤢. Thank you again!!
This video needs more thumbs up!
Great video.. Thanks for making it.. Finally got it cleaned out.. 👍👍👍
Ok hopeful this might work after seeing the comments. Was about to throw this thing out before I finally saw a video that appears to get into the details and makes sense.
Thank you for the great video!
You sir are my hero today. I've been trying to figure out how to disassemble this thing off and on for years, and especially the past couple of weeks as I noticed it felt clogged.
After I got might apart, there was a couple of centimeters of nasty gunk on that shaft. It's all soaking in a mild bleach solution right now.
Don't know why I didn't think to search for a TH-cam video sooner.
Thank you for the video
Very helpful
impressive haven't seen a video in YT with so many views while having almost no subscribers or content , this should be a record?
So cool!!
Do you know how to pop out the locking toggle on top?
Shoot! I was hoping that you'd show how to get the two parts that you rubber-banded out of the way back in after removing. Having trouble with that.
Also, the lock/unlock switch on the top can/should be removed, so the muck under it can be cleaned out..
Seems easy. But I'll never be able to get it back together properly.
The rubberband trick was worth it all though. Can't believe I'm so thick!
Is there a way to get the little silicone "plug" that you open and close when you take a sip? I've managed to get a toothpick under it but there's more filth inside the under part where two two sides of silicone meet. Any ideas on that one?
Cual puede ser la causa de perdisa de temperatura si no esta golpeado?
Score! You can also remove the hinged assembly by lifting up the pin that is slotted and then tilting the other pin out.
What about the air vent/lock? How do I remove that?
I pulled this part out by accident and now can't fit it back in, no matter how much i tilt it. Help!!
How about the locking mechanism? Can that be disassembled?
How do i get the other piece back in? The part that seals the drinking hole
How to reassemble?
Watch video in reverse
How to clean air vent lol. Reassemble is self explqnitory
What about all the goop in the lid springs