Dear MaryAnne, Your video was well lit, high resolution and clear, unlike the other two. I was able to see what needed to align. I think though, that there is a better way to install the double sprung valve into the locking yoke. It is easier to remove the locking yoke from the lid by prying its pair of axle/ bosses free of the lid and then installing the double sprung valve into that. You are not fighting the ledge in the lid, or the spring tension, or the ledge inside the lid. Then the articulated locking yoke/ double sprung valve is reinstalled into the lid (axle bosses into lid holes), reasonably easily. Cheers, John
John P. McCormack Thank you for that explanation John. I didn’t realize that! And thank you so much for your kind words. I’m glad you liked the video. It’s great that you figured out a better way. I hope people read your comment!
Thank you so much for making this detailed video! Attaching the springs to the piece was easy, squeezing and fitting it all back onto the cap was definitely the harder part. You did a great job explaining what needed to happen :)
It worked! Thanks! Your video is the best. You took the time to make it with the detailed image in focus with good lighting so I could tell exactly where the metal springs rest on the plastic nibs/ supports and how the arms swing under the cross bar.
Excellent! One additional step that helped me...I took out the other piece that you placed the first piece with springs onto. I put the piece with the springs onto it ...and then placed the whole two-piece segment back into the lid. Way easier..at least for me. Your explanation and camera work with the still moments are fantastic. Thank you for saving us $$ and from putting our beloved Westloop Contigos into the trash!!!
Thank you so so much, dear, I was struggling to fix my lid for almost 2 weeks and then I found some random videos on youtube which didn't help me and I got really frustrated. As I easily get attached to my stuff so same with this travel mug I use to bring every day to my university didn't want to lose it. And finally, I found your video and it was amazing within 2 minutes I was able to fix my lid. You are an angel to save my lucky and favourite bottle. Thanks a ton, you are an amazing person.
Thanks for the video! Just a note, if you pull the 'push to clean lever forward after you have the springs on the ledges it eliminates the need to get the notches under the cross bar and you don't need any finger strength 😉 but you got me more than 1/2 way there! 🙏
Thank you so much for that demo it was really useful. I think of myself as quite a practical person but I had put the springs upside down and I just couldn’t get it to work.
Oh my goodness! Thank you for posting this. Your video was clear, your voice was clear, and you explained and showed in detail the repair. I was not going to throw my $20 mug away...even though I found it at Goodwill for $1.99🤗 p.s. your nails are pretty
You are a lifesaver! I just did that and my cup was about a week old. I couldn't work out how the springs went back together. I was so salty. Thank you!
Haha. Thank you for letting me know that this was successful for you! You're right - most of the other videos were totally out of focus and we can't see the pieces very well!
Thank you so much! It took me about 20 goes but I finally got it! It helps to think of steps - 1. Get wires in, 2. Get plastic under black ledge, 3. Get nodes in the holes. By tipping it upwards, I had more success. Thanks again ✌️
First of all thank you very much wonderfully done with a lot of patience and good dexterity on your part. The ironic part is I've been an appliance technician for General Electric for over 30 years and I really paid attention to how it came apart but I've been messing with it for over an hour. After your video it got done in less than 10 minutes so kudos to you. John B.👍👍
For anyone struggling to get this to work, I just found it easier to get one side in place and then use a small screwdriver to work the other side's spring into position and do that side too - that way you don't have to squeeze both sides in at once while trying to keep the springs from well, springing...
Thank you for this video, it was exactly what I needed! I had a slightly easier time by holding the springs back while fitting the feet and the fingers, then letting the spring arms go into place, was able to hold the springs back with one finger while doing so. If I could 'love' this video I would.
O.M.G!!! Thanks SO MUCH for posting this. The 1st time I had to reassemble this I had taken it apart to deep clean it, so I paid close attention to what was where. This time it fell apart while I was doing my regular cleaning & I wasted 15 mins trying to figure out what I was doing wrong. This is the worst & best cup ever...LOL. And I'm bookmarking your video for future reference.
Super helpful - but here is another helpful trick, which I saw it on another video in the comments. Took me 2 minutes to fix it this way, no finger strength needed: “I popped out the larger part that swings up. "Push to Clean". Use a small screwdriver or simular tool. Just to get a little leverage on each side. When you have that part out, it is very easy to install the actual seal part with the springs, because you can get a much more favorable angle, so it can be installed with very little spring tension. After you have that spring loaded part I installed, you can install the whole unit (both prices) without much trouble.”
I want to ad my on tip to this video if you you press on the coil of spring it will cause the ends to splay out like a v. This makes it much easier to get it in
thank you so much from Italy! I was so disappointed when it happened yesterday after only the second time in dishwasher...! do you use dishwasher, I mean it happens there to you? thank you again for sharing! it was precious
![จบจนได้ ! | Black Myth: Wukong #007 [ตอนจบ?]](http://i.ytimg.com/vi/DSqvWndF0sw/mqdefault.jpg)
Very clever MaryAnne....just fixed when I was somewhat in dismay thinking I had to order a new one....cheers for you
Dear MaryAnne,
Your video was well lit, high resolution and clear, unlike the other two. I was able to see what needed to align. I think though, that there is a better way to install the double sprung valve into the locking yoke. It is easier to remove the locking yoke from the lid by prying its pair of axle/ bosses free of the lid and then installing the double sprung valve into that. You are not fighting the ledge in the lid, or the spring tension, or the ledge inside the lid. Then the articulated locking yoke/ double sprung valve is reinstalled into the lid (axle bosses into lid holes), reasonably easily.
Cheers,
John
John P. McCormack Thank you for that explanation John. I didn’t realize that! And thank you so much for your kind words. I’m glad you liked the video.
It’s great that you figured out a better way. I hope people read your comment!
Thank you so much for making this detailed video! Attaching the springs to the piece was easy, squeezing and fitting it all back onto the cap was definitely the harder part. You did a great job explaining what needed to happen :)
It worked! Thanks! Your video is the best. You took the time to make it with the detailed image in focus with good lighting so I could tell exactly where the metal springs rest on the plastic nibs/ supports and how the arms swing under the cross bar.
MaryAnne! Thanks for being so patient! This detail was VERY helpful!
Thank goodness you made a video been trying for 30+minutes until I said maybe someone had already done this before? 🥰
Excellent! One additional step that helped me...I took out the other piece that you placed the first piece with springs onto. I put the piece with the springs onto it ...and then placed the whole two-piece segment back into the lid. Way easier..at least for me. Your explanation and camera work with the still moments are fantastic. Thank you for saving us $$ and from putting our beloved Westloop Contigos into the trash!!!
this comment was essential for me! thank you!!!
@@SharadaUnicorn - I'm so happy that it helped you as well! Thank you for taking the time to say so. Made my day!
Thank you so so much, dear, I was struggling to fix my lid for almost 2 weeks and then I found some random videos on youtube which didn't help me and I got really frustrated. As I easily get attached to my stuff so same with this travel mug I use to bring every day to my university didn't want to lose it. And finally, I found your video and it was amazing within 2 minutes I was able to fix my lid. You are an angel to save my lucky and favourite bottle. Thanks a ton, you are an amazing person.
Thanks for the video! Just a note, if you pull the 'push to clean lever forward after you have the springs on the ledges it eliminates the need to get the notches under the cross bar and you don't need any finger strength 😉 but you got me more than 1/2 way there! 🙏
Thank you so much for that demo it was really useful. I think of myself as quite a practical person but I had put the springs upside down and I just couldn’t get it to work.
Oh my goodness! Thank you for posting this. Your video was clear, your voice was clear, and you explained and showed in detail the repair. I was not going to throw my $20 mug away...even though I found it at Goodwill for $1.99🤗
p.s. your nails are pretty
Watched two other videos but yours explained it the best.
Thank you so much!! Judging from the number of people who have watched this video, we are not the only ones to have this issue. Great job!
You are a lifesaver! I just did that and my cup was about a week old. I couldn't work out how the springs went back together. I was so salty. Thank you!
So well done! I fixed it, and I don't have strong fingers. Couldn't have done it without you.
Paula Crafty My pleasure! It's a great mug!
Thank you so much!
I thought all hope was lost and I needed to buy a new one!
Thank you for your very detailed video 😊
You saved me from having to buy a new mug! Thanks
I’ve been trying to fix my lid for two days now and your video just helped me finally do it. Thank you!!
I did it!!!!! Thanks SO much! Saved me buying another lid!
omg THANK YOU for this. I couldn't remember exactly what went where and this was the perfect help
Thank you so much for 1) a good explanation and 2) a video that is IN FOCUS so you can actually see the small parts and where they go/fit.
Haha. Thank you for letting me know that this was successful for you! You're right - most of the other videos were totally out of focus and we can't see the pieces very well!
This camera work and explanation was perfection. I've repaired many a home items using other peoples video's and this was fantastic. Thank you!
Thanks for your help with the assembly. Detailed and easy to follow. Clear recording and imaging of landmarks and where to go.
Thank you so much! It took me about 20 goes but I finally got it! It helps to think of steps - 1. Get wires in, 2. Get plastic under black ledge, 3. Get nodes in the holes. By tipping it upwards, I had more success. Thanks again ✌️
First of all thank you very much wonderfully done with a lot of patience and good dexterity on your part. The ironic part is I've been an appliance technician for General Electric for over 30 years and I really paid attention to how it came apart but I've been messing with it for over an hour. After your video it got done in less than 10 minutes so kudos to you.
John B.👍👍
Thanks for your message - I love what you said. I'm happy to hear you were able to fix it!
Thank you! My wife's one of these broke and I couldn't figure out how it was supposed to go together. This was a big help!
For anyone struggling to get this to work, I just found it easier to get one side in place and then use a small screwdriver to work the other side's spring into position and do that side too - that way you don't have to squeeze both sides in at once while trying to keep the springs from well, springing...
Thank you so much! I was throw my contigo Cup out.. Thanks to you I don’t have to buy a new one
I would have NEVER figured this out so thank you for taking the time to make this video, I got it together in just 3 try’s!!
Fantastic, thank you! Didn't have a clue until I found this!
Thanks for this. Had the same exact issue and couldn't figure exactly how to get it back in correctly!
Thank you for this video, it was exactly what I needed! I had a slightly easier time by holding the springs back while fitting the feet and the fingers, then letting the spring arms go into place, was able to hold the springs back with one finger while doing so. If I could 'love' this video I would.
Thanks for posting this! I was able to fix my mug by following along.
O.M.G!!! Thanks SO MUCH for posting this. The 1st time I had to reassemble this I had taken it apart to deep clean it, so I paid close attention to what was where. This time it fell apart while I was doing my regular cleaning & I wasted 15 mins trying to figure out what I was doing wrong. This is the worst & best cup ever...LOL. And I'm bookmarking your video for future reference.
Excellent!
Thank you so much for making this video, I was so relieved just now when I managed to piece the lid back together. ☺️🙏
Thank you, really helped me put my cup back together 👍👍
My pleasure! You're welcome.
Thank you so much!!!! I fixed it... I love my Contigo Cup!
Thank you very much for your instructive video, its exactly what I was looking for!
Amazing camerawork.
Thank you. Thought I was going to have to go buy new mugs today.
Oh, thank You MaryAnne for the video!
Thanks so much for your video. I am confident I can fix mine now.
Super helpful - but here is another helpful trick, which I saw it on another video in the comments. Took me 2 minutes to fix it this way, no finger strength needed: “I popped out the larger part that swings up. "Push to Clean". Use a small screwdriver or simular tool. Just to get a little leverage on each side. When you have that part out, it is very easy to install the actual seal part with the springs, because you can get a much more favorable angle, so it can be installed with very little spring tension. After you have that spring loaded part I installed, you can install the whole unit (both prices) without much trouble.”
Great! Thank you for that tip!
Very Helpful! Got mine fixed. Thank you!
Thank you young lady for posting this!!! Saved me money!!! Bless you!! Woot woot!!!
OMG.....Thank you so much!!!! I used it once and broke it! Your video is great!!!
Thanks..l been trying to figure this out for a couple hours
Hey thanks for this, you are awesome. Excellent detailed video and well presented. Thought i'd broken my cup lid for good. thanks once again
Brilliant!! Thank you! 🙏🏼 It worked a treat!
Thank you ... again! Works every time.
Thank you, it’s been driving me mad as to which ways the springs went. 🙏
you should be a cinematographer, thank you
I want to ad my on tip to this video if you you press on the coil of spring it will cause the ends to splay out like a v. This makes it much easier to get it in
Thank you very much. an excellent presentation.
Thank you!! One more fixed item, one less piece o garbage in the landfill, Amd a few buck saved!
Exactly what I needed, thanks so much!
This was a great guide! Thanks!
Video is great! Explained exactly what I needed to do.
Thank you! Very clear and easy fix video!!!
Thank you so much! It was very helpful.
thanks was very helpful i fix my coffee mug
You're the best. Thank you.
THANK YOU THANK YOU THANK YOU THANK YOU!!!!!
Saved us some money, thank you!!
thank you so much from Italy! I was so disappointed when it happened yesterday after only the second time in dishwasher...! do you use dishwasher, I mean it happens there to you? thank you again for sharing! it was precious
Your smarter than me. Thank you
Thanks! I tought I needed to get a need one
you saved my mug thanks
Thank you so much for this!
Thanks really helpful 🤗🤗🤗
Excellent. Thank you!!!!
It worked... Many thanks 😘😘😘😘😘
Solid explanation. Thank you!
Thank you so much I think that was the hardest thing ever lol
Thanks a lot! much appreciated!
Thank you! Very useful!
Many, many thanks!
Thanks. Worked like a charm!!
Thanks! It worked 👍🏼
Thanks a lot ! I was confusing with those f*** springs
Excellent!
THANK YOU!
Thank you!
thank you thank you thank you!!!
Very helpful!! Thanks!!
Life. Saver!
very informative
Thanks a lot!
Aleluya !!! Thank you I did it.
You save my cup
THANK YOU
Thanks
I love you!!!
What is the function of this?
Thank you and you have nice nails, lol
May 2024. Video seems helpful, but unfortunately says nothing about where to purchase, and how to install, a leaking cover seal.
chix 😂 it didn't break - it came apart and it's easier to reassemble than you make it appear 🙄 /191117
Ty for the video. The product is garbage.
thank you for this. that wasn't fun.
My pleasure. Hope it helped!
this is such a bad design, I regret baying mine