How to replace the rear brake discs and pads Megane mk2 🚗

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Needed parts:
- Brake discs : bit.ly/discsbole051001en
- Brake cleaner : bit.ly/brakecleaneren
- Brake pads : bit.ly/padsbol1021en
- Copper grease : bit.ly/coppergreaseen
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Rear brake rotors and pads on a Renault Megane mk2.
Discover the world of UseTool EN
Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your Megane mk2 : maclede12.co/toolboxCLASOS3050en 🏆🤖💣
- 30mm socket
- Torx E16 socket
- Big flat head screwdriver
- 15mm spanner
- Socket wrench
- Wheel lug wrench
- Torque wrench : maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS...
- 13mm socket
- T-handle wrench
- Paper towel
- Piece of tissue
- Hammer
- Wire brush
- Brake caliper windback tool
🔝💪Safely lift your Megane mk2 with the hydraulic jack: maclede12.co/jackCLASOH5304en and axle stands: maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝
- Hydraulic jack
- Wooden peg
- Axle stand
🚗📢💡 RESOURCES 💡📢🚗
Usetool's warnings
- Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.
- Drive smoothly and avoid sudden braking for the first 50 kilometres or so to avoid glazing the new pads.
- Make sure to check the stability of your vehicle before starting the operation.
- Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.
Usetool's infos
- When replacing brake rotors, you also need to replace the brake pads. This is a mandatory procedure.
- What do we mean by "glazing new brake pads"?
- Break pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective.
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : • How to (PROPERLY) lift...
- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : • ASTUCE : Pneu crevé ? ...
Space Race by tubebackr | / tubebackr
Music promoted by www.free-stock-music.com
Terms and conditions of the offer : www.mister-auto.co.uk/operati...
Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.
0:00 Intro
0:11 Remove the pads
2:10 Remove the rotor
3:21 Replace the rotor
5:11 Replace the pads
6:44 Tips

[@UseTool_EN]

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

[@florinb3040]

Thank you. This is a great video, really made for beginners.

[@awmawm6995]

5:28 - Break calipper rubber on piston was broken!

[@Paul-jk9lz]

I’m doing my step sons new car now it’s his first so it’s not brand new but I have rounded one of the bolts off and having endless trouble getting it off. The top two bolts had blue lock tight and where hard enough but the bottom two or at least the one I got off has red lock tight which is definitely living up to its expectations I’m done for today the fight continues grrrrrrrrrr

[@mauronald4752]

Wrong, the torque for the nut is not 280 Nm but 175 for sedan car and 220 for estate car