Ultimate LightBurn Rotary Setup Tutorial for Perfect Engravings
ฝัง
- เผยแพร่เมื่อ 6 มิ.ย. 2024
- In this comprehensive tutorial, I dive deep into the art of rotary engraving using LightBurn. If you're looking to achieve perfect engravings on cylindrical or spherical objects like bottles, tumblers, or rings, this video is your go-to guide.
What You'll Learn:
-The essentials of rotary engraving setup in LightBurn.
-Differences and applications of roller and chuck type rotaries.
-Step-by-step guide to calibrating 'mm per rotation'.
-How to accurately measure and input object diameters.
-Tips for aligning and securing different types of objects.
-Importance of test engravings for perfect results.
⏰ Timestamps:
00:00 - Introduction
00:28 - Key Settings To Note
00:44 - Rotary Settings Panel
01:15 - Chuck Type Rotary
02:01 - mm per rotation
03:31 - Aligning the rotary
04:32 - Testing Trick
05:04 - LightBurn Masterclass Course
05:28 - Roller Type Rotary
06:16 - Always Do
06:36 - Trick to engrave sloped surface
07:11 - Roller vs Chuck
🔗 LightBurn Masterclass Course: landing.mellowpine.com/lightb...
🔗Join our Facebook Group: groups/mellowpinelasers
🔗 Laser Engraving Glass Bottles: • Glass Bottle Laser Eng...
If you found this video helpful, remember to hit the like button and share your thoughts in the comments. Don't forget to subscribe for more laser-related content. Thanks for joining us, and stay tuned for more exciting laser projects ahead! 💡🚀
#MellowpineLasers #DIYAcrylicSigns #LaserCrafting #AcrylicSignTutorial #lightburn - แนวปฏิบัติและการใช้ชีวิต
your the only person that explained the setting perfectly thank you so much.
Very helpful video in a very useful format. Thanks!!
Glad you liked it. 😊
Super helpful video! Just assembled and started running my new Atezr L2 24W with roller rotary and Lightburn. Newbie question 1: Any advice on how to properly set the Origin (current position? user? absolute?) so I can avoid crashing into the rails. Second question: how does Home work when the rotary is in use? Thanks so much.
Nice work Mellowpine
Thank you for the appreciation 😊
Super vidéo. Va beaucoup m'aider pour instaler mon chuck ycr 1 ortur. Merci
Heureux que vous ayez trouvé la vidéo utile! 😊
Another great video my friend. I noticed at 7:24 you were etching the white coffee mug without anything sprayed on the mug and getting the black Mellowpine LOGO. Do you mind telling me your Speed/Pwr LPI settings for the black logo on the white mug?
Thank you so much. I used white spray paint on a white coffee mug which is why you couldn't see the coating. I used 80% power at 65 mm/s and 254 LPI on my 20W diode.
@@MellowpineLasers Thank you sir! What did you have to use to remove the paint?
I didn't let the paint dry for too long, some 10 minutes and engraved it. It came off with some paint thinner.
Your video was very informative. Thanks I am new to engraving. I purchased a creality falcon2 22w. I'm trying to engrave a softball. I set-up the rotary laser. When I go to frame it doesn't frame the same as the test ln laser tool. Can you help? Thanks in advance
You should be able to calibrate your rotary using the steps in the video. But if your laser frames properly during the test and doesn't frame the same after you exit the rotary setup, then make sure you have Rotary Enabled in LightBurn after closing the Rotary Setup window.
Can I use a Rotary from XTool and roller from XTool on the ORTUR laserMaster 3 OR laser pro 2 S2 I have the pigtail, but I'm not sure if it's compatible. Somebody gave me their X Tool rotary & Chuck . I just need to know if it's compatible it's a five pin connector, but only using 4 wires center pin is not being used between the five pins.
It should work. If it doesn't you would have to rewire the connectors and match the correct pairs. Shoot me an email at mail@mellowpine.com if you need any help.
My last letter looks different... why could it be?
Will the laser power parameters be the same for different materials if using rotary setup?
More or less the same but it would be good if you could use low speed settings on rotary. Say you engrave at 40% and 20mm/s on a rotary you can lower it to 20% at 10 mm/s. High speed can produce jerky movement in some cases.
But you should try to keep a good balance or else your engraving time would be longer
Hi Sir ,
Can you please tell me which machine is best for bottle and steel
For glass bottles a CO2 laser would be easier. However, if it is not a production environment you can make do with a diode laser. For steel, a fiber laser is the ideal choice but diode can put marks on steel as well. If it's coated metal, any laser can remove the coating to put your design on the material.
You can choose any laser that has a rotary accessory support.
Sir ,
Greetings!!
THANSK FOR THE REPLY.
I plan to buy a sculpfun Pro Max S30 20 W with rotary. It can work please suggest.
Okay, so I just got my Longer Rotary roller in the main and lightburn won't allow the test or print. LaserGRBL does, however its not printing properly. Why can't Lightburn allow the rotary to be set as active (Enabled)?
Which laser machine are you using ?
I've watched your video over and over and when I press start on my Lightburn app (Gwieke Cloud Pro 2), the red error light immediately turns on. I can't figure out what I'm doing wrong. Please help me troubleshoot :)
Hi,
Are you facing the issue only when using the rotary setup in LightBurn or do you face the same issue in the Gweike Cloud software as well?
I have my rotary connected to my laser but when I got to the rotary setup it wont let me click the ok button or the test button. Do you have any ideas or pointers you are able to give me?
What laser and rotary are you using?
I am using a TTS 55 pro 5.5 watt laser with a Creality rotary kit pro. @@MellowpineLasers
I am using a TTS 55 PRO 5.5 watt and i am using a Creality Rotary Kit Pro.@@MellowpineLasers
Of the top of my head, it might be because the wiring configuration is wrong.
I want to learn how to use lightbrun
You can join my Lightburn Masterclass Course to learn everything about Lightburn and much more:
landing.mellowpine.com/lightburn-masterclass-course?TH-cam&
Thank you, this helped a lot. Supper confused about “mirrored” images, turning on or off does not always help. Masking tape idea definitely s game changer!