Yale Assure Smart Lock - Factory Reset
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2019
- ❤️❤️ Please Subscribe. It would be very helpful ❤️❤️❤️
Where to get a deal on Nest x Yale Lock Lock: www.amazon.com/gp/product/B07...
Factory Reset Yale
1. Remove Back Plate
2. Remove Battery's
3. Remove two screws
4. Find and hold White Reset Button
5. Add Batteries (While holding Reset)
6. Release Reset Button
7. Add Master Code to confirm Reset - แนวปฏิบัติและการใช้ชีวิต
![ถ้าพี่วุ้นท้อง แป้งจะท้องไปด้วยกัน !!!! [ดูคลิปเต็มหน้าช่อง] #Short | PANG ORNHIRA](http://i.ytimg.com/vi/FeyEnVMwitA/mqdefault.jpg)
This just solved a weeks-long frustration with our new lock. Thank you for this essential information!
Happy I could help you!
Super helpful thank you for posting this. And an extra thank you for not having a 5 minute intro lol.
Glad it was helpful! And no problem!
Thank you so much. Just saved me so much time. I have an older model (physical keys on the key pad). There is a hole with a reset button inside so I just held the button down with a toothpick and did what you did. Worked perfectly! Thanks again!!!
Awesome so glad I could help!
it was very helpful. thanks
Awesome to hear! Glad I could help.
Thank You!
You’re welcome!
This is very helpful. We just bought a condo with a Yale combination lock that also has a key, but were not given the master code. Does the entire assembly have to be removed completely from the door, both inside and outside in order to reset the master code? The lock appears to be synced to a Vera controller, but we were not given the login information for the Vera controller either. Suggestions please.
Dave if you can get to the reset button without removing everything I would do that. For the Vera part of the question you will need to repair or resync the lock now that it has been reset. If you don't have the log in information did they leave the hub there? Because their might be a way to reset the hub and start from scratch. That would be my suggestion
Thank you verry much.
You are welcome!
Video is informative and accurate. It helped solve the issue of the lock always turning the wrong way.
Thank you for your feedback!
Thank you
You're welcome! Happy I could help!
Hi how to set time bound or one-time usage guest codes in ydme 100 nxt. The local technician doesn't know how to do it. Pls help. As on website it is mentioned that you can set time bound or one-time usage guest codes
Hello, I am not sure either I know it is in the YDME app but have not been in there in a while.
I just bought a house with this lock in place, but the bolt doesn’t retract far enough when the code is entered. Is there a way to make it retract more - 3mm or so?
Hey Robin watch this video about 40 seconds in and it shows how to resolve that issue th-cam.com/video/KomAAPhQT5c/w-d-xo.html
Did you ever resolve this? I'm having the same problem
my lock's dead bult did not move, could not open the door after i enter the code. what should i do? do a factory reset? how to fix this problem? thanks
I’d first check batteries if no power not but to do to fix it
Anyone have trouble with it constantly reading lock jammed? The strike hole seems fine. It beeps five times but doesn’t even try to do anything. We have tried three sets of new batteries
Sometime the weather plays a factor and the door. You might have to push or pull on the door to get it to work correctly.
Can you meet one with Spanish subtitles please 🙏
Vill that is a great idea let me see what I can do for you!
Hey Vill I went ahead and added it should be updated now!
Thank you, I will try. And I let you know.
What's the rehanding process
The rehanding process is teaching the deadbolt which way to go when syncing this lock it will be the first step after the sync and Yale will do it.
How do you reset the network module
This should reset the network module as well. I know I've had a few times where it has taken me multiple trys. I apologize if this does not help.
@@TheSmartHomeHelper it doesn't reset the network module for zigbee. I found out that for zigbee you have to activate "exclusion mode" to reset the network module on these Yale locks.
Thank @trunolimit did not know that good to know!
What if my lock does not have that white button? I must have an old lock, is there another way to reset it??
I wish I could see a picture of it I am not 100% sure I am sorry
I did my resets but the deadbolt opens the wrong way. You never finished your instructions on how to reverse it if this problem occurs? EJ
If you have app this is how it is done:
Select the three line menu bar then tap on Home. Open Settings (gear icon), then select on Lock Settings. Scroll down and find the option Calibrate Lock. Follow in-app recalibration instructions.
If no app the recalibration is an option after you type in the master code. I can't remember the number but I believe it is 1. I'm sorry I could not be more help here.
Pretty fn lame that you need to tear this apart. Engineering at its finest.
I agree 100% wish there was just an easy reset button!!
Thank you
You're welcome!!!! Thanks for comment!