Let's Do This Properly This Time | P2015 Fix | MK6 GTI Intake Manifold Replacement

Even with the other video, I'm still out less than an OEM manifold. Start with the cheap stuff and work from there. Would have loved for the lever arm to have just needed the clamp but new manifold it is!

[@scottjacobsen2889]

I’m telling you mate, If you keep this channel going, I think you’ll blow up.

[@Mk5Lance]

Tick is completely normal. Evap thing on the front of the manifold, can put your finger on it and feel it actuating with every tick. Nothing to worry about.

[@rkqvlogs6243]

The tick is the evap purge valve it’s pretty normal from what people say and cheap to fix.

[@SacredMomentsPhotography]

I used the same intake and 6 months later still running great

[@TheParkingLotMechanic]

Good to hear! Mine is doing well so far!

[@TinoR626]

Not sure where your getting your info from but you can run the IE, HPA and SPA intake manifolds with the stock pcv system. IE requires you to buy an install kit and the parts are in the kit as for HPA and SPA its built into the manifold. The only 2 that don't allow it out of the box would be the cts and the ecs tuning manifold

[@KrustyMuffin5]

How's that URO manifold running 6 months in? Any estimate on the mileage you've put it through so far? I've been pretty curious how the different brands (URO, Bremmen, 1A Auto, etc) run vs OEM.

[@talltrippin4732]

Yeah I have a p2015 and my cars running real rough. I’m about to order a manifold and spend 2-3 hours attempting to replace it

[@talltrippin4732]

I’m doing this job now and it’s driving me fucking nuts lmao I got so mad and I removed damn near every coolant hoses bc my hands are big and I couldn’t reach anything. I still have to get that support bracket on the backside and I was wondering how you managed to get it out man I’m so annoyed with this car and myself.

[@alexboi3633]

I have a 2015 a3 with a p2006 and p2015 code. It’s a brand new manifold and a brand new runner sensor by the oil filter. I still have both codes after swapping that sensor. Anything you can think of?

[@PS2luvr]

Can you link the manifold you used?

[@chrisguadalupe8731]

You would need an ie or a custom tune if you went with the upgraded intake.

[@bristly3676]

Yes, as a recommendation for a tune, ie has one for there manifold, but I strongly recommend getting a Cobb access port and getting a stratified tune

[@TheParkingLotMechanic]

I might want to venture into the custom tune segment down the road to get her on the dyno and really maximize my mods!

[@korey420]

That bottom support bracket.Held me up for 2 hours trying to remove mine.. Needless to say I did not install that bracket back... 😂

[@westonstaufenberg7278]

I believe it's there to keep the manifold from vibrating too much or something

[@korey420]

@westonstaufenberg7278 that's what the 8 bolts and nuts that hold the intake manifold on would do..lol.. and the throttle pipe is literally attached to the block that attached to the TB
Over engineering imo.. Germans do alot of that lol

[@lirimhas1622]

What are those long screws under the injectors?

[@KrustyMuffin5]

Longer studs/bolts that help keep the fuel rail mounted and aligned to the head. Each one has a 10mm nut that keeps the fuel rail pinned when installed.

[@nikolaskane4978]

Hey just letting you know you don’t need a catch can they include a hose that runs from the manifold to the pcv

[@TheParkingLotMechanic]

Not all performance manifolds have the port unfortunately. I probably should run one anyways.

[@nikolaskane4978]

@@TheParkingLotMechanic the IE one comes with it I was running it with the stock pcv for a couple months until I found a catch can on Facebook marketplace for cheep

[@nikolaskane4978]

@@TheParkingLotMechanic if you get the IE manifold and plan on goin port injection they sell a manifold for port injection and all you gotta do is get the plugs from precision raceworks to block them off if you don’t wanna use them or you can get the one for port meth and you just put the little plugs in to block it off

[@TheParkingLotMechanic]

I see the kit IE offers which would be nice. Just still costs so darn much!

[@nikolaskane4978]

@@TheParkingLotMechanic ya it’s stupid expensive

[@ail67]

Anyone have p0441 error? Idk how to solve it, it’s says purge flow

[@TheParkingLotMechanic]

That's a new one to me. Check the forums?

[@ail67]

@@TheParkingLotMechanic they say replace the purge valve
I’ve replaced it but still
I will check the plugs
O2 sensor also
First and second band

[@joedeleon8376]

I think I’ve seen your ride around WR?

[@TheParkingLotMechanic]

That's where I be so I bet you have!

[@ethanbryan1724]

Cost me 2500 to do this 😭

[@TheParkingLotMechanic]

That sucks! Doing it yourself is only marginally better XD

[@banging35hzs]

I'm sure a performance manifold requires a custom tune

[@TheParkingLotMechanic]

It does. Just adding to the cost that I don't have XD

[@JuliaPeterson]

Good video until the Jesus loves you, im not even religious. was about to subscribe until i saw that

[@chayanesanabria5104]

So what if you're not religious? This isn't even a Christian Channel.. it's a car Channel dude.. either way telling someone Jesus loves you should not be looked at in a negative light.. what is wrong with you

[@scottjacobsen2889]

Mate, except people for who they are. Basically the guy is just trying to be nice to everyone. You should be grateful if anything.

[@JuliaPeterson]

@@chayanesanabria5104 If i tell you to worship the Devil, are you going to be offended?
Probably, because you don't believe in it, much the same as i don't believe in Jesus.
Pushing your beliefs on someone else has no place on TH-cam

[@chayanesanabria5104]

@@JuliaPeterson please tell me exactly wen i pushed my beliefs on someone? ....ill wait
I even stated that it wasnt a christian channel ..just the fact that he unfollowed the channel cuz he said "god bless you" was weird..dont have to believe in Jesus to take it as a nice gesture but i guess to each is own..