not trying to be rude here but... cameraman is somewhat annoying sometimes imo. I'm not saying he doesn't have the right to but if he would shut it more often i'd have a better experience listening to this 😂
Also those engines take 750ml of oil and are lifan engines you can find upgrade kits for DIRT CHEAP goes up to 53mm without hoaning the cases hole a 53 with a 22mm carb and a clutch convertion kit would make that bike FAST.
Also you can check the cdi box pins should be 5 could be 4 and buy from temu (a 5 or 4 pin what the bike has) cdi unit with rev limit options i have it to and its fun af
Bro just do a video trying out different types of packing in the muffler ..should be able to unscrew that red tip and see the fiber glass packing atleast on some you can .. just an idea lol
If you unscrew the cap where the throttle cable is there a needle move it up one clip and that should stop the stalling at mind throttle.. I had the same trouble on my crf150r the middle jet is full throttle the jet you took out is o to 1/4 and the needle is 1/2 to 3/4 throttle
14:30 when it started running worse its because u had the choke ON, the sputtering sound it made when u revved it is a Rich bog, a lean bog sounds different, it runs fine with the choke OFF
U need to change main jet u was messing with the pilot jet . Also you needed to lift the slide needle down a clip or 2 if adjustable that would lift the needle for more fuel for your half throttle cutting out . The pilot jet is ur low end idle circuit and your main jet is for high end and wide open throttle and the needle in the slide is for like quarter to 3/4 throttle
Buy a nibbi 24mm carb, trust me every person iv seen, says it has improved performance, but a carb upgrade will always be your best bet for more power.
@ZoominAlways I am using the same temu exhaust on my 2019 honda crf250l rally bike and its wild for such a cheap chinese exhaust ! i will send some pics later on ahaha
Me and a friend are attempting to build a rev limiter/2 step thing. You need a small 12v battery and something to cut and attach wires. Would you guys try one?
Those exhausts are filled with some kinda fiber glass strings I have the same one, and they are actually loud if you put them on a 250. it kinda sounded like crap on that thing 😂 and your bike needs a aftermarket carb like a nibbi or even some cheap 30$ one I promise you it will make your bike run 10x better. And your exhaust may be to long now making it have less power.
I posted the giveaway on TikTok and Snapchat, and if you didn’t see it and won you would be aware cause the winner was FaceTimed on camera. I’d never scam
Bro I was just watching vids like norm and when I got to yr vid I hate to turn it up cuz it sounded like I bumped it and turned it down u NEED to invest Ina mic fr I love yr content but u need good audio picture quality is good tho
Put a better cdi box run a performance dc cdi along with a oil change and run 15w30 amsoil that thing should last and make good speed and run it on mid grade fuel
Buy a racing carburator from temu. Don’t buy something too big (for a 125cc to 150 a 28mm is good) i don’t know What cc is your’s. If you have something like a 100cc a 26 mm is not bad
Not gonna lie why y’all think he’s gonna scam y’all he’s not like that one of the coolest TH-camrs I’ve seen keep doing what your doing
Only of the camera man would stop talking. Seems like a chill camera man but he should probably stop talking so much.
@Driftme44 nah, these videos wouldn't be the same without cameraman and his commentary.
@@justinjohnson5752 his commentary? Bro he was just yapping through half the video and every now and then he would actually drop a banger comment.
@@Driftme44without the confused camera guy the videos wouldnt be the same, i love the bs he is sometimes yapping haha. "YO ITS MINT!!!"
@@Driftme44 Thats whaty makes these videos even better
That’s a lawn mower carb, get that trash off there . Swap it out
Definitely
Best bike ever, won't ever blow up
Next upgrade should be nibb carb. Definitely makes a difference
Fresh ah video
bro when you poured oil down the exhaust it looks like a 2 stroke now
yeah obviously, 2 strokes burn a lot of oil because oil is mixed with the gas. but obviously it isnt gonna be a smoking THAT much.
Camera man a swag ahh dude 😎😎
not trying to be rude here but... cameraman is somewhat annoying sometimes imo. I'm not saying he doesn't have the right to but if he would shut it more often i'd have a better experience listening to this 😂
Naaaa you're trippin it would be boring without his commentary
Wow that’s a great opinion keep it dumb shit to urself
Camera man should be silent in my opinion. Maybe the creator left his ringer on by accident.
The cameraman hate is so forced
Camera man valid !
hey i think u got a locked CDI in there because it sounds very low rpm
yup thats exactly what i was thinking too. the CDI in them are programed for children too .
You need to get a 5th scale rc car like a losi 5t or a baja5b and just abuse them it would be amazing to watch!
I love the noise, that is what is entertaining and satisfying!
best cameraman ever!
Always a good night when zoomin posts
I love your attitude, keep experimenting. This is hilarious
This is a good video I’ve been watching your videos for a long time since the moped
add race cdi that you can change the rev limiter rpm
Dude you are TWEAKING on this bike! Makes me want to binge a new hobby, great content - plastics look better without decals in the all white heh.
The cringe I felt when he put dirt in the exhaust was worse than when I see Hawk Tuah
No don’t say that, can’t compare me to that thing
Real red night stop hating
@@zoominalways It was just the noise of the rock that is now forever in the pipe that got me. I've got nothing against you.
Bro I love you content and your helmet and that was the double temu bike
I put that same exhaust on my 185S 3 wheeler an the power gain was insane ! You should put the whole pipe on !
This is such a good TH-cam name for your Channel
Also those engines take 750ml of oil and are lifan engines you can find upgrade kits for DIRT CHEAP goes up to 53mm without hoaning the cases hole a 53 with a 22mm carb and a clutch convertion kit would make that bike FAST.
Also you can check the cdi box pins should be 5 could be 4 and buy from temu (a 5 or 4 pin what the bike has) cdi unit with rev limit options i have it to and its fun af
Make a series upgrade the bike make it a beast and buy some cool grsphics and there you are my boy *sorry for spaming tho😂😅
I loved the sound of the bike when the quad was there
Bro just do a video trying out different types of packing in the muffler ..should be able to unscrew that red tip and see the fiber glass packing atleast on some you can .. just an idea lol
With the thicker pipe it needs more fuel so you either need to drill the main jet and pilot jet or just get bigger jets
If you unscrew the cap where the throttle cable is there a needle move it up one clip and that should stop the stalling at mind throttle..
I had the same trouble on my crf150r the middle jet is full throttle the jet you took out is o to 1/4 and the needle is 1/2 to 3/4 throttle
will a the temu exhaust work on a car
14:30 when it started running worse its because u had the choke ON, the sputtering sound it made when u revved it is a Rich bog, a lean bog sounds different, it runs fine with the choke OFF
i fw this guy i can wait till i get my bike imma make a yt js like him
Hello there Mr zooming always
The frp pit bike you bought I am turboing it so I can go faster and I tuned it
I put that pipe on my hawk 250 with a nibbi carb. It's loud and claps. They're made for honda crf's.
I had that same exhaust on my crf250 an Apollo rx250 lol it sounds good
fire video man
next up: big bore kit billet conecting rod and stage 5 head (from temu) oh yah and dont forget a mikuni carb from temu
Temu pwk carb and jet kit would be super cheap and easy swap.😎👍
vare cool bro keep posting i like to see your videos have a good day bro
😁
Thats husqvarna plastics?
Try drilling a small hole into the exhaust header this will make it pop and bang continuously :Ddd
The 110cc is a 125cc but with a smaller intake port so if you port the intake it turns in to a 125cc👍
That’s not how it works bud
juu ei se kyllä noin toimi
@ bruh i got a 110 cylinder on my 125 its literally the same shit just a underpowered 125
you change the oil on china bikes??
Buy a pwk 21mm carb the difference is crazy the only bad thing is you need a adapter to
Zoom try to give it a slight throttle with the vacuum hose off down hill.
U need to change main jet u was messing with the pilot jet . Also you needed to lift the slide needle down a clip or 2 if adjustable that would lift the needle for more fuel for your half throttle cutting out . The pilot jet is ur low end idle circuit and your main jet is for high end and wide open throttle and the needle in the slide is for like quarter to 3/4 throttle
Why don’t you motor swap it?
Bruh
Is not even blown bro
14:00 cameraman has siezure
you should also check out the Daytona pitbikes
real
Zoomin! Zoominalways 20:30
Do a temu mikuni carb upgrade next
Buy a nibbi 24mm carb, trust me every person iv seen, says it has improved performance, but a carb upgrade will always be your best bet for more power.
Zoomin and C boys would be crazy.
They will
@ZoominAlways I am using the same temu exhaust on my 2019 honda crf250l rally bike and its wild for such a cheap chinese exhaust ! i will send some pics later on ahaha
Me and a friend are attempting to build a rev limiter/2 step thing. You need a small 12v battery and something to cut and attach wires. Would you guys try one?
I have a similar kind of dirtbike, it popped before, but it stopped overtime. I dont know whh
we need a stunt video
cool!! it's so fun when it smoke!!
please remake the exhaust 🤐
Why does it have no clutch?🤔
try a temu carburator on the temu dirtbike
Those exhausts are filled with some kinda fiber glass strings I have the same one, and they are actually loud if you put them on a 250. it kinda sounded like crap on that thing 😂 and your bike needs a aftermarket carb like a nibbi or even some cheap 30$ one I promise you it will make your bike run 10x better. And your exhaust may be to long now making it have less power.
see if you can find cdi that raises the redline next
Did bro just scam everyone by claiming he would give away a temu dirtbike and then never giving one away?!
he sent one out directly from temu jot this exact bike my buddy got it
I posted the giveaway on TikTok and Snapchat, and if you didn’t see it and won you would be aware cause the winner was FaceTimed on camera. I’d never scam
@@zoominalways god damm it i was trying to cover your back 😂😂 i didn’t know that
Bros a real one
honestly I trust him I don’t think he would ever scam
put a 65 engine in it
And fit the pipe on but cut it down so the muffler fits
11:07 what ya doing there bud lmfao
The bikes plastics are 2016-2018 Husqvarna Tc - Fc mini replicas 😂😂
You should put a temu carb on it
The limi sounds so low rpms sounds like the choke is on
yall need to carb from temu for that temu dirtbike🤣
Bro I was just watching vids like norm and when I got to yr vid I hate to turn it up cuz it sounded like I bumped it and turned it down u NEED to invest Ina mic fr I love yr content but u need good audio picture quality is good tho
Freshie 😉
Bro I got that same silver one and it was loud asf on a 110😂
you should paint the frame black or white
can u link the temu exhaust?
Put a better cdi box run a performance dc cdi along with a oil change and run 15w30 amsoil that thing should last and make good speed and run it on mid grade fuel
you should sell bike graphics with your channel name kinda like the cboys
Dat thang sounds like a two stroke lol
love the vid
Pls drill out the primary jet and move the needle up
Buy a racing carburator from temu. Don’t buy something too big (for a 125cc to 150 a 28mm is good) i don’t know What cc is your’s. If you have something like a 100cc a 26 mm is not bad
bro u gotta buy a honda z50 or order a chinese one "monkey bike" from somewhere, they have the same engines as those bikes and they fit straight on
holy hell the geometry on that exsaust is fucked
Could of saved the decals on wax or parchment for when u want to make custom ones or want them abck on it looks like any clapped out bike now 😅
link for the bike please
that pipe costed less than 10$ to make and even less for labor and they still sell it for 60$ on temu that is overpriced
Who tf says "houyah"😂😂😂
Whislendiesel but 2 wheel but version
link for the pipe ima put it on my quad lol
get a 2 stroke and only put the oil no fuel and see what it does
put some pro lube in it and get a different carb
upgrade the carb to a 24mm or 26mm pwk
Next video on this thing I wanna see you tune the shit out of it. Just make it pop bang obnoxious as all hellll!!
Put a muffler on backwards.
140cc big bore on that thing
It seems good but i have a kayo 110
This bike needs a yx 150 or 160 bro
Wow you went from not talking and making dumb videos. To talking and making fun dumb videos. And you have grown dramatically lol
the cameraman keeps yapping about stuff that doesn't make sense, it sounds like he's trying to sound professional or something.
Hey zooming gas vid as always when am i gonna get a pin?
da pipe