How to make Wireless Water Level Indicator with Alarm

How to make Wireless Water Level Indicator with Alarm
Required Components:-
1) IC HT12E & HT12D
2) 434MHz Tx & Rx RF Module
3) 1M & 33K ohm Resistor
4) 1K Resistor x 2
5) 680 ohm Resistor x 4
6) BC558 Transistor
7) Green x 2, Red, Blue, Yellow LED
8) Buzzer 5V
➡️ 1 Circuit Diagram Link :- drive.google.com/file/d/1gN24...
➡️ 2 Circuit Diagram (for Long Wire in the Tank) Link :- drive.google.com/file/d/1k-_t...
➡️ Buy online Electronic components from RoboComp.in at lowest Price in india
👉 Website Link :- robocomp.in
---------------------------------------------------------------------------------
🔴 Related Videos⤵️
▶️ How to make Water Level Indicator with Alarm using ULN2003
👉 • How to make Water Leve...
▶️ How to make Fully Automatic Water Level Controller with Alarm using BC547 & NE555
👉 • How to make Fully Auto...
▶️ How to make LOW Level and FULL Level Alarm with Level Indicator
👉 • How to make LOW Level ...
▶️ How to make Simple Water Level Indicator with Alarm
👉 • How to make Simple Wat...
---------------------------------------------------------------------------------
#electronicsproject #scienceproject #waterlevelindicator #wateralarm #bc558 #watermonitor #transistor #wireless #circuitdiagram #circuit
Thank you for Watching.....

[@ericjarvie]

Excellent but just one point someone mentioned Oil tanks in the comments below.... i am familiar with fuel level indicaters and they also use resistance however its an floats height relative to an coil that carries an measurable variable resistance as the floats height changes an resistance is measured this is what is displayed with the level indicator however normally these are double insulated or even totally isolated from the fluid environment...I think the commentator may need to consider this as even the slightest spark or arc could result in fire potential...fuel is highly flammable water is not but regardless this is excellent work thats done here and thanks for sharing i say to the uploader...

[@ElectronicBlood]

This is the best circuit I have ever seen...!!

[@michaelallen5505]

This is a bit different, but for anyone looking for a simple, free off/on switch for water level, try pulling a water level switch from an old washing machine. I used one for controlling a pump on some homebrewing equipment. It works using air pressure. There is usually a 3-level adjustment knob. Just attach the vinyl tubing on the switch to a piece of cpvc. Et voila!

[@spbhatnagar4206]

Wonderfully done. Such a useful idea for many. Thank you for sharing and a great video.

[@rola7445]

Muy buen proyecto. Te quedo invertido los cables el buffer debe pitar cuando queda vacío, solo es de invertir los cables

[@epolytechnic1199]

Good.
E Polytechnic. A technical channel.

[@anuragprojects]

Thanks...

[@breakertv4759]

Nice one...very helpful demonstration..

[@anuragprojects]

Thank you so much....

[@tamasember]

Hello!
Do you have any experience of how such a simple cable sensor behaves in the water in the long term? Scale or dirty water in the evening.

[@AzmatAli-ht1rz]

This is intermittent level monitoring like ultrasonic detectors installed for certain level's, or level switches for certain levels.
For continuous level monitoring, an ultrasonic detector is installed on the top of a tank, as the level increases, the ultrasonic waves cut results in the change of digital display.

[@brianmcdonald4805]

Good project, please link for buy 434MHz Tx & Rx RF Module? Datasheet or name components? Thank you

[@fluke196c]

nice point to point soldering. I would've reversed the colors of the leds so red shows when it's nearing capacity or use bar graph led

[@markawbolton]

I would have used a clean soldering iron.

[@iancikal]

Thank you for this awesome experiment..
now i'm think for more functionality,
Ex: Buzzer beep on 100% and 25% level, with only one buzzer..
imagine if High and Low level we got alert, that was greatly feature.

[@jumbo999614]

Did you get it to work? I'm using only one buzzer on 25% and 100%.
The problem now I have is the buzzer beeps all the time. So I don't know which one cause the buzzer to beep 25% or 100%.

[@kabandajamir9844]

So nice the world's best teacher

[@anuragprojects]

Thank you so much.....

[@matheusmendes3492]

Melhor vídeo do dia do TH-cam
Ganhou um inscrito do
BRASIL
Faz um video montado uma mesa com sensores de pra ascende led agora

[@saadmev1133]

Can i use a piece of wire as a antenna i put this tx and rx circuit in different containers plastic one in water tank with peice or wire out of it does it work???

[@shurovik2987]

Very interesting ICs....

[@dhitakka]

Hi, I am looking for a similar device. With little difference. It should start a buzzer once water level in the tank comes below a certain level.
The changes needed would be as follows:
1> Instead of 1 water tank the system should work with 8 separate tanks
2> For all the tanks, the buzzer should go off when the water level reaches dead level - say 15%
3> Each LED corresponding to that tank should start and buzzer for that should go off
4> After the buzzer goes of there should be manual button which can be used to turn it off/reset
Can you design something like this? I guess it might need more buzzers, ine for each tank.

[@Amit24981]

Awesome work... Keep it up.

[@imranfarooqi5776]

Well and Nice circuit
Please update it with auto switch off motor...

[@dominicmcmanus6810]

Nice one! Can this be used for Home Heating Oil Tank levels with the alarm going off when the tank is down to 1/4 full?

[@greg778123]

Yes just put the alarm resistor on the 25% led and use float switches
I’d use float switches with water also because in higher humidity you’ll get false positives especially when it’s in use for a long period of time

[@eeprom34]

Thanks for the useful project

[@anuragprojects]

You are welcome

[@johnmirajkar]

Very nice project good 👍 keep it up

[@anuragprojects]

Thank you so much sir

[@PK-nv4on]

Nice project 👍

[@anuragprojects]

Thanks 😊

[@valtersouzaribeiro761]

Boa tarde parabens muito bom

[@anuragprojects]

Thank you...😊

[@d.l.harrington4080]

For those that wonder about waters conductivity. Most tap water is a fair conductor.
Ask anyone that got a shock while standing on a wet floor or soil in their bare feet. The dissolved solids in the water make it more conductive. Distilled water is the least conductive.

[@user-ho6to4mo5t]

That is true. But, you should be aware that electricity used in this project is DC. I guess DC voltage doesn't give you shock...

[@d.l.harrington4080]

@@user-ho6to4mo5t Tale my word for it. DC will shock you and kill you. Not necessarily in that order. I believe the charge coming from an AED heart starter is DC.

[@michaambroziewicz2476]

@@user-ho6to4mo5t DC can injure or kill you as well as AC, the major factor is the voltage.

[@greg778123]

One thing I learned from a similar circuit is to use float switches because after a while it’s going to build up resistance and give false positives from the minerals in the water
This is a pretty cool circuit though

[@greg778123]

@@user-ho6to4mo5t actually DC is slightly more dangerous but 3.7 volt isn’t enough to shock you
EVs are around 400v and you wouldn’t want to use that high of a voltage around water unprojected that’s why they still have a 12 volt battery and equipment in the electric cars

[@user-oy4rm9kr4t]

It works. Anyhow, the whole thing will not last long because it keep transmitting data. continuously. And it will also interfering other nearby device and violate the transmission regulations.

[@ershavirafroz8358]

Does the wire corrode with electrolysis or the wire stays protected?

[@shyamalmaity6139]

Very good Technology.

[@girmaabera1435]

This is really great work! God blessed your hands 🙌 man!
Is that work for liquid chemical tankers? Please let me know.
Thanks 🙏

[@Nazmulsaidi]

No it will not. You use plastic floats for chemical.

[@priyankan2422]

Which technology is used this product?

[@chiraglotliker1095]

Sir, How much is the range (approx meters) of the RF receiver?

[@alipnar8589]

Eline emeğine sağlık TEŞEKÜRLER.

[@anuragprojects]

Most Welcome bro.... And thanks for watching my videos 😊

[@srinivasaniyengar9049]

Excellent video.

[@anuragprojects]

Thank you very much!

[@RajaR-xo1bs]

Nice work! Next version to give a low-level alarm intermittently, say few beeps every 1 minute.

[@bartronicsecurity]

Nice idea but you will jam up the frequency so car remotes and just about anything that works on 433mhz will now not work. You need to add a small timer to switch on the transmitter on for 2 or 3 seconds every 10minutes to be legal and not jam up the frequency. Also transmitting continuously will flatten the battery in the TX in a day or 2.

[@ponetwozerodrone3707]

another work of art not just a piece of electronics!

[@gregl7597]

It's garbage and a waste of time

[@ponetwozerodrone3707]

@@gregl7597 i never build any so if it work or not is not my point i consider it a work of art visually.

[@gregl7597]

@@ponetwozerodrone3707 you're still wasting your time.
Use your knowledge to build PRACTICAL things.

[@harunkaramuklu1460]

Thank you 👏👏👏👏👏👏

[@leeverink32]

is there one that can send an sms to my phone? would be great for my boat.

[@lazaroramirezmorales7311]

Excelente video. Gracias por compartir. Seria posible que publicaras el diagrama? Gracias. Saludos desde Puebla, Puebla México

[@andriuskaunas3714]

Thanks! Perfect idea..

[@anuragprojects]

Thanks and most welcome

[@aubrymacielpereirafilho3017]

Aprovado valeu muito obrigado!

[@anuragprojects]

Most welcome....☺️

[@education.online_frevryone]

Woah, that's really cool!

[@wajidyoutuber4555]

Very nice and information technology

[@anuragprojects]

Thanks

[@rob1589]

Hi there.
Where can one get hold of the RF Receiver and Transmitter Modules?
RoboComp in India don't ship or supply outside of India.
Can anyone point me to a supplier for these modules please? I am in South Africa.

[@aniljauhari3663]

Very educative & simple process BUT will you guide me from where I can get Complete fully automatic system

[@surendraarts660]

Excellent

[@felixgarcianazco9496]

MUY INTERESANTE

[@monookumar143]

How many Maximum distance between transmeter and reciver?

[@ManojVarsani]

nice video.
I have 5 diesel generators of 400kva , with 3000 liter diesel tank each. So i need i need fuel level and digital data, but i have no idea what to do. Will you suggest any circuit or any instrument so i can wach fuel data in my office.

[@generaltechnologyknowledge5165]

Very good project sir

[@anuragprojects]

Thank you so much

[@anasqai]

This bulb like a guaranteed never explode or ruined, if like this make for room type like nightlight, the size?

[@santoshwani6913]

Maine is cercuit ka ic us me or usaka isme ulta sulata galati se lagaya pura cercuit damage huwa hoga ya sirf ic change kar kar dekhu overheat huwa tha please reply

[@jasonhernandez6291]

Could this concept be converted to turn wireless turn signals.

[@Roger-mg8zh]

Amazing Thanks !! So Simple if you know how to do ..:-)

[@anuragprojects]

You're welcome!

[@EEECampus]

nice projects thanks

[@anuragprojects]

Most welcome 😁

[@balasubramaniamp864]

You are brilliant. But who will make all these.

[@RajeshKumar-vo9zq]

Sir please add automatic on,off motor circuit

[@digital210921]

What is the maximum distance between transmitter and receiver?

[@manzor9930]

I've been using a similar circuit since the 1980s to turn the water pump on and off for the house water tank. The water pump automatically turns on when the tank is 30 percent empty and turns off automatically when the tank is full.2-pair telephone wire was used for 12 volt DC current from the tank to the circuit. Now I will try to build this circuit with some modifications.
I've been using a similar circuit since the 1980s to turn the water pump on and off for the house water tank. The water pump automatically turns on when the tank is 30 percent empty and turns off automatically when the tank is full. 2 micro switches on tank and nylon cord inside the tank have been used. There is no loss of current. Now I will try to build this circuit with some modifications.
گھر کے پانی کے ٹینک کے واٹر پمپ کو آن اور آف کر نے کے لیے میں اس سے ملتا جلتا سرکٹ ۱۹۸۰ سے استمعال کر رہا ہوں۔ ۳۰ پرسنٹ ٹینک خالی ہونے پر واٹر پمپ خودبخود آن ہوتا ہے اور ٹینک فل ہونے پر خود ہی بند ہو جاتا ہے اس میں ٹینک سے سرکٹ تک ۱۲ وولٹ ڈی سی کرنٹ کے لیے ۲ پیئر والا ٹیلیفون وائراستمعال کیا ہے۔ ٹینک کے او پر2 مائیکرو سوئج اور ٹینک کےاندرنائیلون کی ڈور کا استمعال کیا ہے۔ اس سے کرنٹ کا کوئی خظرہ نہیں۔ اب کچھ تبد یلیوں کے ساتھ یہ سرکٹ بنا کراستمعال کروں گا۔

[@ishtiakkhan4110]

It's about 5-6 meeters

[@SubodhKumar-di8jc]

5, 6 m is poor range

[@s1familyvlogs43]

I made this one and its range is 30meters

[@narsingraokumbala6048]

​@@ishtiakkhan4110
20 to 30 meters inside the building,or 70 to 100 meters open air

[@tkrajan4382]

Exellent bro....!🔥🔥🔥

[@anuragprojects]

Thank you very much 😊

[@julianisida4720]

What is the component you are soldering at 9:53 minute? That component does not appear in the diagrams or component list. Is it necessary?

[@manuelgil9231]

Great, pleases please link for buy 434MHz Tx & Rx RF Module?

[@sanjayraval6011]

Important ye he underground se overhead ka distance tak work hona chahiye

[@d.l.harrington4080]

Looking for a source for the WS-TX-01 and the WS-RX-01. I like this video, but I wish authors would include part sources. Had to look at the board in the video to get a guess at the TX & RX units part number.

[@greg778123]

eBay

[@user-kv5xw5jl9k]

Good my question Sir, give the number of what you put on the + point of the led,

[@farooqhussain2576]

For how many distance it's work? and for how many days battery works?

[@rohitgurung909]

Nice project!!

[@anuragprojects]

Thanks!

[@FOREMAN2015]

How long the transmitter battery will be consumed if we put it on for 24/7?

[@julianisida4720]

Can I use a 433 MHz Tx & Rx RF in stead of 434 MHz? Tks.

[@MiguelGuatemala]

Muy bueno, pero me serviría si sonara el buzzer cuando quede 25% de liquido. Muchas Gracias

[@anuragprojects]

I have made this video on your request so please watch it soon... Link th-cam.com/video/idMgV8YTucw/w-d-xo.html

[@TravelVlogsforall]

Awesome videos hn sb, kindly spot welding k lye koi project bnain jo easy ho or acha ho jo 12Volt se chale

[@anuragprojects]

Sure sir, Thanks for watching 😊

[@prashantsharaf2986]

Background Music is good

[@anuragprojects]

Thanks

[@ahmedkamil7094]

could humidity tamper its operation?

[@snaplash]

Wanted: A wireless remote thermistor to replace the internal one on a window air conditioner. This will allow the temperature sensing to be done on the other side of the room, instead of inside the unit, which often causes short cycling.

[@reasoningtruth]

The thermocouple for my window A/C has a long enough capillary tube to unclip it from the front of the coil and put it beside and right next to the outside of the A/C. Now I can set the room temp to the room temp I want and forget about it. (It's one of those auto on/off units, so I turn it on at the beginning of summer, and it turns itself on/off as needed).

[@ZachariaKassim]

Can we tramsmit audio over the transmiter and recive via reciever ❓️

[@jimmyelectronics2264]

Sir can I replace LED s with relays

[@alikhalil7735]

Thanks my friend, is it possible to add a relay for the pump and it works when the level reaches 25%

[@gundogankazanc9241]

possible with using a pnp transistor. but you also need to stop pump when the tank is full. so you will use a start/stop circuit. you can do it with limit swithches simply or an electronic circuit.

[@memyvideos]

Ji, how to determine resistor type for led. Say I have 5volt led them what resistor to be selected

[@hamzavictor2385]

Awesome

[@anuragprojects]

Thanks bro...

[@Bianchi77]

Nice video, thanks :)

[@anuragprojects]

Thanks

[@user-wx8rw4qe5f]

Can we make a transmitter camera and a sender at the door of the house 👍👍

[@UpinkProduction]

I love it good 👍

[@anuragprojects]

Thank you so much....

[@nasirazeem5643]

❤ very good 💯

[@bobjellekjr6106]

How do you make it buzz when it's empty and not filled instead. I could use one of these for my greenhouse

[@siddharthnaithani]

you can use use buzzer last connection instead of red light.
buzzer can create lots of noise. instead of this you can automate the pump connection. so that tank automatically fill when it is going to be empty.

[@Dave_en]

You can make NOT gate using transistor so that lowest level of water touching the sensor keeps the buzzer off while open circuit (meaning empty container) gives out signal to the buzzer.

[@parashurambellikatti]

Just invert the water sensor wire sequence.

[@joseignacioarbayojaime4339]

Dear friend, I am following the video of level sensor without wiring. The instructions indicate the 434 component as transmitter and receiver and I have not been able to find it, the most common is 433, it could be replaced by this one. If so, what would the diagram look like with this substitution? Thank you

[@anuragprojects]

Hi, I am making video on 433MHz RF Module. You must have a look. Thanks for watching.

[@manaschandradas9529]

Aap ne jo zener diode led ke positive leg pelagaya uska value kya hai

[@bhagwatilallohar1341]

Sir what range

[@dimvasilevich4789]

CAST IRON SOLDERING IRON ... WOW it's many iron words) he/ god video, by new solder)

[@user-no3xr1qg3d]

What equipment a required in design a system

[@gunatg]

❤Hi,i want medium,high quality amplifier making videos and circuits, thank sir

[@sanjayraval6011]

Nice

[@reasoningtruth]

This is great! Would you show us how to make a wireless spanking machine? (The wife wanted me to ask).

[@jimmyelectronics2264]

If there are two or three systems nearby, will there be any interference.

[@embeepay1957]

is it possible to switch on and off motor
by altering this circuit

[@zeekayzafar]

Dear Sir,
If two wireless water level circuits are to be installed with two water tanks, then what is the method to vary the frequency of both, please guide me.
Regards
Zafarullah Khan Faisalabad Pakistan

[@greg778123]

I think try 333mh for the 2nd one

[@madhukarvaskoty]

At 10:00 in your video you are soldering one blue color component across all the LEDs ..what is it? Please mention it..

[@anuragprojects]

There are wire crossings, so a piece of wire has been installed for insulation. Thanks for Watching.

[@Aqeel.M]

I noticed that as well and knew what was that

[@ailtonalcantarasilva3791]

Amazing 😊

[@anuragprojects]

Thank you so much.....😁

[@user-sn1ob1uz6t]

Very very interesting sir, receiver module circuit please, I want to make it by myself for satisfaction. Or were I can get it. 🙏

[@anuragprojects]

Circuit Diagram Link is given in the Discription.. Thank you...

[@rangersforrebellion1758]

Dear BC558 is PNP transistor. But on collector you mention buzzer negative..

[@gyanusoft14]

Good job bro..I m also using this circuit as wireless power switchs for my home appliances....but pls confirm how many days transmitter battery work...as we have to regular Power on transmitter circuit..also confirm is this work from third floor to ground floor distance...?

[@luisfernandez6808]

Could you show the schematic for the switches?

[@Nazmulsaidi]

The battery will flaten out in two days. U need to use continues power source.

[@yazanayash8821]

How long this battery on tank module will survive

[@khurams3]

very nice and usefull ,
but 1 thing you don,t mention the range between transmitter and receiver.

[@anuragprojects]

Hello, Range in open space (Standard Conditions) 500 Meters with Antenna / 100-200 Meters without Antenna. Thank you so much...