THANK YOU THANK YOU! Almost no one tells you how to remove the sensor. If you don't know and it's an awkward removal in the first place... I though I was going crazy trying to remove it. Again, thanks. For others doing videos PLEASE aways tell us how you're removing the sensor when it can't be clearly seen from the direction you're looking.
@@steviekay_Z33 I only replaced one i have the other one I will replace tomorrow but also tested the signal coming out of the plug 3 wires on is the ground wich is good the second one has power but the 3rd one has not signal that is why im thinking is a fuse or relay but i don’t know ware is located it
Bro I just ordered all three sensors cuz last time I pulled codes I got the P0345 . My Z cranks and cranks and eventually will start and run normal but the idle needle is freaky AF. Now I can’t get codes from OBD2 reader not connecting to ECM . Praying I didn’t F my ECM . Waiting on the sensors . K dios me perdonara 🤟🏾
If its not your starter, battery or battery terminals, it depends on where you got the sensors, i had to get it from a legit oem parts store, the ones sold on amazon or any aftermarket it garbage
Been dealing with the same issue I was loosing my mind. The moment you said you had your slip TCS and SES light on I knew this was the fix. Thank you
No problem bro glad this video helped
Those lights being on are generally related to the steering wheel clockspring
THANK YOU THANK YOU! Almost no one tells you how to remove the sensor. If you don't know and it's an awkward removal in the first place... I though I was going crazy trying to remove it. Again, thanks. For others doing videos PLEASE aways tell us how you're removing the sensor when it can't be clearly seen from the direction you're looking.
Hey no problem i know exactly what you mean some videos just show where the sensors are then skip the removal and they have it out
I replaced my camshaft sensor but still have the same problem I think is a fuse you know ware the fuse is located for the camshaft sensor
Do you replace just the camshaft sensor? Or did you replace the crankshaft position sensor also? I advise you change both
@@steviekay_Z33 I only replaced one i have the other one I will replace tomorrow but also tested the signal coming out of the plug 3 wires on is the ground wich is good the second one has power but the 3rd one has not signal that is why im thinking is a fuse or relay but i don’t know ware is located it
@luiscruzcedeno8642 yeah replace the crankshaft sensor first to see if that's the issue
i did it and it still won’t start idk what to do
Did u find the problem?
Are you getting codes are these?
Its can be p0340 or p0335
Bro I just ordered all three sensors cuz last time I pulled codes I got the P0345 . My Z cranks and cranks and eventually will start and run normal but the idle needle is freaky AF. Now I can’t get codes from OBD2 reader not connecting to ECM . Praying I didn’t F my ECM . Waiting on the sensors . K dios me perdonara 🤟🏾
You have to get good sensors bro no aftermarket junk. Check your obd fuse and always disconnect the battery
I replaced cam and crank sensors. Now the car cranks an cranks an cranks then finally starts.. what next?
If its not your starter, battery or battery terminals, it depends on where you got the sensors, i had to get it from a legit oem parts store, the ones sold on amazon or any aftermarket it garbage
Pull out game on point hahaha. Thanks bro
😂😂😂
Could you put a link of where you bought your sensors
It was from my local parts shop