Great video, I replaced my choke today. I did it without removing the plastic from around the fuel tank by cutting the old cable up near the handle bars and taping the old cable and the new cable ends together and pulling the new cable thru as I pulled the old cable out. Electricians call it fishing. Just make sure you tape the new and old together really good and tight. Feed the new cable in with one hand up by the handle bars while pulling the old cable out by the carb....hope this makes sense. It worked really well. Thanks for the video.
Getn ready to do the same. My advice is buy a cover for your quad and won’t have to worry about replacing the cable. Left mine out in snowy cold temps and that’s when the trouble started. Moisture plays havoc on the cable and ignition.
Thank you very much ehhh 🇨🇦 :-) Best $35.00 if ever spent! Never worked from new 20 years ago, always used carb primer to start it. That was rough and terrible in cold weather. Starts immediately and smooth like a Honda should now. I appreciate your time spent to educate us all. Well done :-)
Dale, I see in your video between minute 7:34 and 8:00 there appeared to be a small O-ring between the choke float and the spring. What is that for? Also does the new choke cable come with that? I did not see that addressed on re-install. Look forward to your comments on that.
Great video Dale. I have a 2006 and you showed me exactly what I need to do. I have the same problem and the plastic nut is broken in the same place. Thanks so much!!
Great video. My 2004 rancher carb choke plunger nut broke this afternoon while putting it back on. I am using your video to teach me how to replace that. Thanks much.
Great video buddy got mine replaced with no problems only thing I didn't like was the price Honda charged for a new choke plunger haha Great help thanks for the video
I'm having trouble getting the choke plunger to go back in the housing. It seem that the o ring is catching or the needle isn't lined up. I did lube the o ring and everything looks straight. Any suggestions?
Your Rancher is like my Foreman. Glad your going slow as to be able to watch. This Foreman had been stolen by some kids and ruined the ATV. All the plastics are in a box and so far what I had done is replace the carb, new choke cable as you had just done. New solenoid and battery. The digital meter was also ruined by heat and the protective cover was shot as well. I purchased a new one and it seems to work just fine. I'm waiting on a fuel sender as we speak then will try to fill the tank with some 93 octane. What fuel do you use??
Trying to assemble the parts at the carb end of the cable end (rubber elbow boot, clip, spring and metal elbow and nut) but uncertain about positioning of the metal elbow. Which end (little or big end) is inserted first first into the rubber boot?
I would try the little end. I didn't take the elbow apart. It has been 7 years since I did this job and haven't done one since. Sorry I couldn't give you a definite answer. Thanks for watching.
Don't know what i did wrong but i did all this and my choke don't work as it should (pretty sure i bought the wrong elbow but it threads in, don't see it making a big difference)
Hey Dale, nice video. On my dads 02 foreman (carb n choke look the same) his chike won't stay up, slips right down. Do you know if there is something to tighte to fix this?
I have 2 ATV and the coke on both of them will not stay on. I just hold in out for a few minuets. I guess that's better than driving around with the choke on. Thanks for watching.
+Dale Hobbs my friend told me I don't need to replace the whole choke cable that all I need to change is a new choke valve. I'm not sure If I should order the choke or the choke valve. What do you suggest ?
I have a 2013 honda ranche rat( rancher at ) 420. no choke. Only 2 things I dont like and I don't like a lot! #1 reverse. Too much bullsh it to shuft it into reverse. #2 steering. It dose not turn sharp enough and it extrenely stiff *needs power steering.* I have a 2016 honda trx 500 Deluxe M7 with powersteering.! And front diff lock ! Fantastic. But. Manual shift sucks and that same dam complicated reverse procedure. Wow what a difference that power steering makes. Manual shift is same as motorcycle except no clutch. Both have all wheel independent suspension.
![[UNCUT] บอสพอล แผลงฤทธิ์ บอสพระ-นักร้อง ก. โดนแฉยับ! I คนดังนั่งเคลียร์ I 21 ต.ค. 67](http://i.ytimg.com/vi/XKf6HeftoPI/mqdefault.jpg)
Great video, I replaced my choke today. I did it without removing the plastic from around the fuel tank by cutting the old cable up near the handle bars and taping the old cable and the new cable ends together and pulling the new cable thru as I pulled the old cable out. Electricians call it fishing. Just make sure you tape the new and old together really good and tight. Feed the new cable in with one hand up by the handle bars while pulling the old cable out by the carb....hope this makes sense. It worked really well. Thanks for the video.
Hi Kevin
Fishing sounds great. Would have saved me some work.
Thanks for watching.
Getn ready to do the same. My advice is buy a cover for your quad and won’t have to worry about replacing the cable. Left mine out in snowy cold temps and that’s when the trouble started. Moisture plays havoc on the cable and ignition.
Replaced the cable and was able to “fish” the old cable thru as was suggested. Good advice!
@@miked8227 Good to hear. Glad it helped.
Glad to have this available. Thanks. Had trouble getting through the outside noise though. I understand though.
Thank you very much ehhh 🇨🇦 :-) Best $35.00 if ever spent! Never worked from new 20 years ago, always used carb primer to start it. That was rough and terrible in cold weather. Starts immediately and smooth like a Honda should now. I appreciate your time spent to educate us all. Well done :-)
Thanks this is a great help im changing my choke cable in the morning . Thank you
Great video! I went to start my 2015 Rubicon this morning and the cable housing broke in two.
Good work Dale - Mine was broken like yours and Bill Shaw's - You have a nice place out in the country!!
Thanks and thanks for watching.
Oh man, thank you so much for posting a video on replacing a choke cable! Very, very helpful and just the information I needed. A+
Remy Martin
Thanks for watching.
Dale, I see in your video between minute 7:34 and 8:00 there appeared to be a small O-ring between the choke float and the spring. What is that for? Also does the new choke cable come with that? I did not see that addressed on re-install. Look forward to your comments on that.
Excellent video. Even I replaced the choke cable on my 2004 Honda by following this great example. Thanks!
Thanks for watching.
Great video Dale. I have a 2006 and you showed me exactly what I need to do. I have the same problem and the plastic nut is broken in the same place. Thanks so much!!
Bill Shaw
Thanks for watching.
Great video. My 2004 rancher carb choke plunger nut broke this afternoon while putting it back on. I am using your video to teach me how to replace that. Thanks much.
Happy I could help. Thanks for watching.
Great video, thanks for doing that, feel better about changing my cable tomorrow. Cheers
Vancouver Island Real Estate Pros
Thanks for watching.
Great video buddy got mine replaced with no problems only thing I didn't like was the price Honda charged for a new choke plunger haha Great help thanks for the video
Thanks for the tips buddy. Helps out alot!
Thanks for watching.
AWESOME !! you did a great job!!
Well done ! To the point with everything you need to know.
Thanks for watching.
Thank you for posting this. Very exact and informative. I need to do this to a unit I just picked up. Will save me a lot of time figuring it out. A+
Thanks for watching.
I'm having trouble getting the choke plunger to go back in the housing. It seem that the o ring is catching or the needle isn't lined up. I did lube the o ring and everything looks straight. Any suggestions?
Great instructional video Dale. Thank You
Randy Cross
Thanks for watching.
Your Rancher is like my Foreman. Glad your going slow as to be able to watch. This Foreman had been stolen by some kids and ruined the ATV. All the plastics are in a box and so far what I had done is replace the carb, new choke cable as you had just done. New solenoid and battery. The digital meter was also ruined by heat and the protective cover was shot as well. I purchased a new one and it seems to work just fine. I'm waiting on a fuel sender as we speak then will try to fill the tank with some 93 octane. What fuel do you use??
I use non ethanol fuel I think it is 59 octane. I'm at around 6400 feet above sea level so I can use the lower octane.
Thank you for this. It was extremely helpful and perfectly done
Thanks and thanks for watching.
Trying to assemble the parts at the carb end of the cable end (rubber elbow boot, clip, spring and metal elbow and nut) but uncertain about positioning of the metal elbow. Which end (little or big end) is inserted first first into the rubber boot?
I would try the little end. I didn't take the elbow apart. It has been 7 years since I did this job and haven't done one since. Sorry I couldn't give you a definite answer.
Thanks for watching.
@@DaleHobbs39 Thanks for your reply, Dale
great video Sir, thank you
Thanks for watching.
Your video was helpful and on target thanks.👍👍👍👍😅
Keonne Williams
Thanks for watching.
Don't know what i did wrong but i did all this and my choke don't work as it should (pretty sure i bought the wrong elbow but it threads in, don't see it making a big difference)
I'm missing my "choke mechanism" - the part the cable connects to at carb in... any idea about a part number for this? thanks
You should be able to find that portion at any online store. Partzilla out of Albany has a wide stock of parts.
@@Smalltechguy thanks - I was able to order it as part of a kit - cheers
totally awesome. funny and informative
Hey Dale, nice video. On my dads 02 foreman (carb n choke look the same) his chike won't stay up, slips right down. Do you know if there is something to tighte to fix this?
I have 2 ATV and the coke on both of them will not stay on. I just hold in out for a few minuets. I guess that's better than driving around with the choke on.
Thanks for watching.
tighten the 17mm nut right under the choke pull
What spark plug uses that ATV? Help plis
Thank you for the video
Thanks for watching.
Thanks... good teaching.
Glazart Ishaq
Thanks for watching.
Nice camera work.
Mike Starkey
Thanks
great video. thanks so much for sharing. I have a new one coming from Ebay
+fixnfool 1 Great ATV. I'll put a video up showing we putting the snow plow on it.
I have Honda rancher 350 .do i have to pull the choke when starting a 4 wheeler
Yes until it has warned up.
Thank you
Great video
Thanks for watching
Great video...will help me to replace on mine
Thanks
+Blou MichelB Thank you.
Very good information. Please do something about the background noise.
Daniel Maguire
The background noise is a problem. I have upgraded my editing software and can filter out most of it. Thanks for watching.
Thanks helped a lot 👍🏼
Your welcome. Thanks for watching.
+Dale Hobbs my friend told me I don't need to replace the whole choke cable that all I need to change is a new choke valve. I'm not sure If I should order the choke or the choke valve. What do you suggest ?
If the cable isn't hard to move in and out and it moving the valve, then just replace the valve.
great video. My problem was needle was stuck in carb. WD40 did the trick on that though.
+Outdoorsnomad 03 Thanks for watching. WD40 and carburetor cleaner will fix darn near anything.
put year and model in title or description, thanks
2005 Rancher ES
Automatic transmission is by far the best system and honda is oddiles and gobs above the rest of the ATVs.
I have a 2013 honda ranche rat( rancher at ) 420. no choke.
Only 2 things I dont like and I don't like a lot!
#1 reverse. Too much bullsh it to shuft it into reverse.
#2 steering. It dose not turn sharp enough and it extrenely stiff *needs power steering.*
I have a 2016 honda trx 500
Deluxe M7 with powersteering.! And front diff lock ! Fantastic. But. Manual shift sucks and that same dam complicated reverse procedure.
Wow what a difference that power steering makes.
Manual shift is same as motorcycle except no clutch.
Both have all wheel independent suspension.
Most Hondas are easy to bypass the reverse stuff research it❤
⁸8iiiiii