Golf Cart WHEELIES | Built 420cc Golf Cart Build Pt. 5

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ก.พ. 2019
  • Today we continue wiring turn signals and brake lights for our street legal golf cart, as well as cut a piece of plywood for a seat. Then we got for a test drive, and with a little help, our 420cc golf cart does wheelies!
    Thanks for Watching!
    RSVP FOR MINI MAYHEM SPRING 2019: goo.gl/QBMPNN
    Facebook: goo.gl/VR6mh2
    Instagram: bit.ly/3T8njaF
    ----------------GO POWER SPORTS PARTS IN TODAY'S VIDEO---------------
    420cc Stage 2 kit: goo.gl/gra2F7
    Go kart throttle cable with mounting bracket- never rig another throttle cable again- call for availability!
    Go Power Sports: bit.ly/3QKyODE
    NEW MERCH: www.cars-cameras.com/
    Equipment we use: www.amazon.com/shop/carsandca...
    The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
    Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 870

  • @CarsandCameras
    @CarsandCameras  5 ปีที่แล้ว +82

    Wheelies (with a 'lil help)! Looking forward to seeing you guys at Mini Mayhem Spring 2019!

    • @rogermarshall8991
      @rogermarshall8991 5 ปีที่แล้ว

      Please check my message

    • @BFTEgodswarrio5939
      @BFTEgodswarrio5939 5 ปีที่แล้ว

      Pretty sure ike has a bug that may have the solution to the problem? 🐞

    • @beboglen2
      @beboglen2 5 ปีที่แล้ว

      Ike has a Instagram? N i send u a massage on Instagram

    • @lancebowers6591
      @lancebowers6591 5 ปีที่แล้ว +1

      Paint it metallic blue, or silver

    • @Scratch-athon
      @Scratch-athon 5 ปีที่แล้ว +2

      Channel is getting pretty boring guys,best of luck..but I can only take so many disappointing video before I gotta go..

  • @draggonhedd
    @draggonhedd 5 ปีที่แล้ว +24

    Just go get an "electronic" blinker module at the autozone. They work regardless of LEDs.

    • @sergeantspeed5941
      @sergeantspeed5941 5 ปีที่แล้ว

      I did this to my 99 tahoe when I switched the fronts to LED switchbacks. A simple signal relay swap and they work just fine without resistors or anything

  • @Halbostfriese
    @Halbostfriese 5 ปีที่แล้ว +96

    What about a volt meter on the dashboard? Since that 420 doesn't have a charging system it'd be useful to know your battery level.

    • @polaris6644
      @polaris6644 5 ปีที่แล้ว +14

      They should get an alternator and connect the belt to the rear axle

    • @nothanks2994
      @nothanks2994 5 ปีที่แล้ว +2

      @@polaris6644 definitely

    • @jamesblanton9364
      @jamesblanton9364 5 ปีที่แล้ว +3

      Absolutely needs an alternator, no doubt in my mind dude.

    • @LeObsidianCraft
      @LeObsidianCraft 5 ปีที่แล้ว +2

      customvideo454 not with the billet flywheel

    • @polaris6644
      @polaris6644 5 ปีที่แล้ว +1

      @customvideo454 They could but now they're really starting to get into fabrication just to mount the coil. They should just DO an alternator. Would charge while coasting and might help braking

  • @StupidEarthlings
    @StupidEarthlings 5 ปีที่แล้ว +98

    So.. you have no rear turn signal when brakes are on?
    Heck, itd be easier just to add amber colored lights on separate circuit for turn signals..just sayin..

    • @Timmy6216
      @Timmy6216 5 ปีที่แล้ว +10

      I fully agree with you these guys should just add a another light to the rear end and run just brakes for one light and run blinkers for the other it would be the simplest of way to do it and the most cost-effective

    • @flavxer7345
      @flavxer7345 5 ปีที่แล้ว

      I agree as well, just add two just like the front ones but isolate them to the flasher circuit only, and that would fix it.

    • @buildingtrades7070
      @buildingtrades7070 5 ปีที่แล้ว +2

      Agreed...Use rear trailer led lights. All in one, brake, turn, and back up lights. This way when you put a reverse box in from "go power sports" you can have back up lights also...

    • @buildingtrades7070
      @buildingtrades7070 5 ปีที่แล้ว +5

      And replace those front lights to bigger ones, to fit the body opening.

    • @justineller2059
      @justineller2059 5 ปีที่แล้ว +7

      I agree but they have been hacking stuff more and more every video I will be fine is cool and all but it only goes so far

  • @UraTrowelie
    @UraTrowelie 5 ปีที่แล้ว +88

    Without Ike, this channel would be called Cameras.

    • @user-el4ii7zq6l
      @user-el4ii7zq6l 5 ปีที่แล้ว +5

      Wish I could find a good camera guy and editor.

    • @salmonisyummiyeet163
      @salmonisyummiyeet163 5 ปีที่แล้ว +2

      Lmao

    • @rugger8787
      @rugger8787 5 ปีที่แล้ว +2

      i i just come for ike any way

    • @n1r0lanynonmouse6
      @n1r0lanynonmouse6 5 ปีที่แล้ว +1

      @@rugger8787 Did you ever notice that Ike gets to do all the first test rides? He is like a crash-test dummy, aside from being all the brains and technical knowhow on all the modifications they do.

    • @jamesblanton9364
      @jamesblanton9364 5 ปีที่แล้ว +5

      John's learning heaps and definitely has his place on the channel, i like him, but there's no doubt who's the mechanical master and i'm sure both John & Ike would agree.

  • @insertname290
    @insertname290 5 ปีที่แล้ว +11

    First minute of the video johns gotta go and say “it’ll be alright”... you meant “it’ll be fine”... it’s alright though bud, we all have bad days... haha

  • @crankysports
    @crankysports 5 ปีที่แล้ว +57

    almost broke my finger clicking!! That thing is gonna be so cool ripping around your town. You should Letter it up with vinyl "Cars and Camera" decals. or at least a big "It'll Be Fine" on it :)

    • @bradleyj.fortner2203
      @bradleyj.fortner2203 5 ปีที่แล้ว +2

      Agreed. But, I'd keep the smiley face.

    • @crankysports
      @crankysports 5 ปีที่แล้ว +2

      @@bradleyj.fortner2203 I agree :) keep the smiley too

    • @froggersgarage5127
      @froggersgarage5127 5 ปีที่แล้ว +4

      Custom licence plate saying it'll be fine would be cool

    • @noonecareswhenalltheydo
      @noonecareswhenalltheydo 5 ปีที่แล้ว

      froggers garage ITLBFINE for 8 letters, or ITLBFIN for 7. I don’t remember how man NC allows on vanity

  • @cannonballrepair7940
    @cannonballrepair7940 5 ปีที่แล้ว +1

    Anyone running a surface grinder while watching this great video?!?!
    Good job guys! I want to see the face on people when y’all leave out from a light on the back tires!!

  • @jasonkurt8696
    @jasonkurt8696 5 ปีที่แล้ว

    I love how you guys problem solve your issues rather than just giving up. Speaks a lot to your character. Watching you inspires me to keep looking for a solution to the problem. Keep up the content! Looking forward to Wednesday!

  • @ninjabob8170
    @ninjabob8170 5 ปีที่แล้ว +13

    Wire a resistor in-line to get the turn signals to work with a standard relay. 👍🏻👍🏻

    • @georgeduckworth4452
      @georgeduckworth4452 5 ปีที่แล้ว

      What size? That's the important parts lol

    • @dwerg85
      @dwerg85 5 ปีที่แล้ว

      George Duckworth keep going bigger until it works. Or figure out what load the relay wants and calculate which relay you need.

    • @unclemuir
      @unclemuir 5 ปีที่แล้ว

      Then diodes to prevent the feedback problem.

    • @georgeduckworth4452
      @georgeduckworth4452 5 ปีที่แล้ว

      @@dwerg85 lol I know this. Ohms law is calculated in my head constantly. It's part of my job.

    • @sergeantspeed5941
      @sergeantspeed5941 5 ปีที่แล้ว

      Or instead of needlessly wiring resistors in until it works, buy an electric relay.
      People love to make work needlessly complicated

  • @alangee79010
    @alangee79010 5 ปีที่แล้ว +1

    Train horns man! You guys have come a long way with that cart. 👍👍👍👍

  • @robertjames7869
    @robertjames7869 5 ปีที่แล้ว +1

    So I see the video is posted for 32 minutes with 5.7k views already when I come across it. A ratio of 3 views a second, pretty outstanding.
    "It'll be fine " definitely applied from when you two first launched this channel.

  • @kenbergren3903
    @kenbergren3903 5 ปีที่แล้ว +1

    Keep having fun and building kool stuff. Wheelies and a burn out, life is good : )

  • @tyrellcalloway3066
    @tyrellcalloway3066 5 ปีที่แล้ว +2

    I found y’all a couple years back y’all inspired me to build my first go cart keep up the good work it’ll be fine

  • @Knee-ko
    @Knee-ko 5 ปีที่แล้ว +1

    Love John's cackle as Ike's lying flat on his back at the end of the vid. Ike - you have to rig up some payback.

  • @tomjoslin4571
    @tomjoslin4571 5 ปีที่แล้ว

    Just add another Orange light above the red one for the turn signal like a car. Get an LED flasher. Looks like a lot of fun! Nice job guys!

  • @arprecisionmodshop-1446
    @arprecisionmodshop-1446 5 ปีที่แล้ว +3

    You boys be careful on that thing. I've put a cart just like that so hard on its side dicking around. Reverse 180s, it was all fun and games until it hooked up mid turn. Luckily didnt get hurt, but keep that in mind! Another great video, keep up the good work.

  • @kipgriffin8779
    @kipgriffin8779 5 ปีที่แล้ว +1

    Ike flat backed while u drive off was priceless.good job guys. Id love to come hang out with u guys one day .kip from Clyde NC

  • @garypaisley
    @garypaisley 5 ปีที่แล้ว +2

    For a moment there I thought Ike had accidentally let the smoke out of the electrical wiring system. Well done lads!

  • @Mike-xt2ot
    @Mike-xt2ot 5 ปีที่แล้ว +1

    Make all your town eco people love you by putting a flexible solar panel on it to charge your battery when sitting. Lol

  • @speckledjim_
    @speckledjim_ 3 ปีที่แล้ว

    Aw man if I could spend my days messing with engines and karts, what a pleasant life that would be
    That's why I love you guys, you live a life that I could only dream of

  • @EliKazmaier
    @EliKazmaier 5 ปีที่แล้ว +4

    Awesome video!
    Can't to see the inspection video!!

  • @andywarren17
    @andywarren17 5 ปีที่แล้ว

    John looks like a kid on that thing lol. It's coming along awesome guys.

  • @lylekehrer6159
    @lylekehrer6159 5 ปีที่แล้ว +1

    Man, you really don't think about wheelies and skidding when it comes to golf carts. This definitely will be a golf cart that'll stand out!

  • @a.j.sgarage9637
    @a.j.sgarage9637 5 ปีที่แล้ว +2

    Reminds me of when we had golf cart races at camp. The owner hosted it. It got a little too competitive. We had all of the fat guys standing on the backs for traction, wound up just doing wheelies. Had strings hooked up to the throttles so it actually got full throttle, and then we got them up to 40mph

  • @brendankahljr.6719
    @brendankahljr.6719 5 ปีที่แล้ว +1

    Ike cracks me up. "It'll be fine! *finger points*" "We got Hazards..." "Let me think...let me think. *smirk*" LOL.

  • @jamadeus13
    @jamadeus13 5 ปีที่แล้ว +34

    That looks fine all right. You guys should hook up with Grind Hard Plumbing. Would be awesome to see their Barbie Jeep Crawler at Busco Beach.

    • @donny_flips2317
      @donny_flips2317 5 ปีที่แล้ว +4

      Jonathan Amadeus yessss

    • @georgesalisbury5093
      @georgesalisbury5093 5 ปีที่แล้ว +4

      also quad ricers with kramers golf cart

    • @rogerbushong3464
      @rogerbushong3464 5 ปีที่แล้ว +5

      Quite a ways from North Idaho to Busco Beach.

    • @jamadeus13
      @jamadeus13 5 ปีที่แล้ว +4

      @@rogerbushong3464 Roadtrip!

    • @georgesalisbury5093
      @georgesalisbury5093 5 ปีที่แล้ว +1

      @@rogerbushong3464 they live in north Pennsylvania

  • @Calthecool
    @Calthecool 3 ปีที่แล้ว +1

    That gas tank peeking through the seat is so funny.

  • @pontiacpanic79
    @pontiacpanic79 5 ปีที่แล้ว +1

    Such a awesome build, I love this channel. Can’t wait to see the golf cart making parts runs.

  • @Zzeke
    @Zzeke 5 ปีที่แล้ว +2

    If you go back to the auto parts store, they will have blinker modules that are digital and made for LED lights. They don't cost a whole lot more..... your panel lights did the trick! I can appreciate the not giving up... Wiring turn signals is much easier than folks realize, you'd cause yourself more trouble trying to pull it out of a motorcycle or something than what you just did. Good work.

  • @SportbikerNZ
    @SportbikerNZ 4 ปีที่แล้ว

    Great series. Loving it.

  • @Ruggedpig
    @Ruggedpig 5 ปีที่แล้ว +2

    Would love to come to the mini Mayhem. but it'd be a 4100 K Drive :( you guys need to come up with an event on the West Coast .love the content boys keep it up!!!!

  • @ryanwelch64
    @ryanwelch64 5 ปีที่แล้ว +3

    Yeeeeaaaasss, I think I’ll be able to come to the meet for my birthday!

  • @ricerneon399
    @ricerneon399 5 ปีที่แล้ว

    I watch your videos at 0.25 speed it prolongs my happiness 👍

  • @sweeneysweeney1901
    @sweeneysweeney1901 5 ปีที่แล้ว +3

    That thing looks like it takes off pretty good guys. 👍

  • @urielsalas9265
    @urielsalas9265 5 ปีที่แล้ว +3

    Hold on tight Ike, Hahaha nice bail.

  • @zachstevens7549
    @zachstevens7549 5 ปีที่แล้ว +1

    Loving this build! Keep up with the good work!

  • @desmondauffrey7823
    @desmondauffrey7823 5 ปีที่แล้ว +2

    That looks like soooooo much fun

  • @froggersgarage5127
    @froggersgarage5127 5 ปีที่แล้ว +2

    It looks and sounds so sweet keep up the good work and great content

  • @fabianmurray7230
    @fabianmurray7230 5 ปีที่แล้ว +1

    Love how you learn we learn too good job guys.

  • @rickyaderholt4119
    @rickyaderholt4119 5 ปีที่แล้ว +1

    Hahaha the end was funny. Who couldn't love you guys? Thanks for the video

  • @troycrowder9942
    @troycrowder9942 5 ปีที่แล้ว

    super nice job on everything you have done on the golf cart i like its nice all the way down to the smiley face lol good show guys

  • @andersonkl4v349
    @andersonkl4v349 5 ปีที่แล้ว +1

    This golf cart is my favorite build only because ive been thinking about a 670 on one
    Keep up the good work love the videos

  • @drewalsup9200
    @drewalsup9200 5 ปีที่แล้ว +1

    This is such a cool project! Maybe you guys eventually throw a lift on it with bigger offroad tires. And keep the yellow you dont see many yellow golf carts and it looks awesome. This is what people did before all the side by sides got popular. Lifted golf carts are fun and also make great pit vehicles and you can offroad them too

  • @shawntl
    @shawntl 5 ปีที่แล้ว

    Looks like a blast have fun and be safe

  • @oskarsigns
    @oskarsigns 5 ปีที่แล้ว +1

    This is turning out really cool!

  • @aldricracette4813
    @aldricracette4813 5 ปีที่แล้ว +2

    That thing is going to be bad ass

  • @codyswilley
    @codyswilley 5 ปีที่แล้ว

    I live this build. I think I'm going to build a golf cart this summer. I have a good body and frame. Can't wait to see it done

  • @krawlr
    @krawlr 5 ปีที่แล้ว +1

    You need the euro car trailer adapter for the lights. (cars with a separate amber turn signal bulb) That will let a brake light blink when the turn signal is on.

  • @prodrift101
    @prodrift101 5 ปีที่แล้ว

    I think you need a relay in series on the circuit where your switched 12v for the illuminated brakes is run through. That way your foot provides constant 12v to a relay that switches on/off for one side only when the turn signal is activated.
    Love these videos, I watch them every week. I’m a mechanic similar to Ike and I enjoy watching the creativity.

  • @bobbyraytalksabouteverythi7883
    @bobbyraytalksabouteverythi7883 5 ปีที่แล้ว +1

    I WANT one!!!!! Great video guys!

  • @frogglidd1951
    @frogglidd1951 5 ปีที่แล้ว +2

    Love the billed

  • @olds97lss
    @olds97lss 5 ปีที่แล้ว +1

    I love that you guys put your mistakes in there. Keep on keeping it real boys!
    Really think you should have geared it up a bit more.

  • @lbzhonest5984
    @lbzhonest5984 5 ปีที่แล้ว

    Wicked cool direction of the channel guys!

  • @jefferyrightmire9520
    @jefferyrightmire9520 5 ปีที่แล้ว +1

    You guys are lucky. Be safe but keep up the great stuff.

  • @kennethberkley4633
    @kennethberkley4633 5 ปีที่แล้ว +1

    You guys are awesome

  • @mattvaughan5466
    @mattvaughan5466 5 ปีที่แล้ว +32

    They make a flasher with a ground wire that will fix your turn signal problem

    • @castlemania08
      @castlemania08 5 ปีที่แล้ว +2

      Load resistors

    • @Fourcycle
      @Fourcycle 5 ปีที่แล้ว +1

      Right. That way they can make a flasher circuit that's independent of the load and the flash rate won't change with the load. Adding load resistors in parallel with the LED's when using a 2-wire flasher will work, but that's a kludge that may go well with this build ;o)
      To have turn signals and brake lights work simultaneously, try using one of those trailer light converters for foreign cars which have independent brake and turn bulbs / filaments. (One can also design one using XOR or XNOR gates and drive transistors, but that's... Nevermind.)

    • @castlemania08
      @castlemania08 5 ปีที่แล้ว

      Fourcycle why is life so complicated 😂 sometimes it's easier to just run independent indicators rather than combined with the tail/brake lights. It's a bit more work but it's simple circuitry

  • @trevornelson7524
    @trevornelson7524 5 ปีที่แล้ว +2

    Nice work boys.

  • @cameronhowell1614
    @cameronhowell1614 5 ปีที่แล้ว +1

    Last clip 100% 💯

  • @Legoman585
    @Legoman585 5 ปีที่แล้ว

    Definitely one of the coolest projects so far

  • @MrWoodie42099
    @MrWoodie42099 5 ปีที่แล้ว +1

    Cant wait for mini bike mayhem

  • @Nathan-gc1zy
    @Nathan-gc1zy 5 ปีที่แล้ว

    Sounds good looks fun keep up the great videos

  • @wheeln24-79
    @wheeln24-79 5 ปีที่แล้ว +13

    Should just buy a turn signal and brake light kit for a ezgo. They have them on Amazon for like $150. Wiring harness, lights, everything in one kit. Wouldve saved so much headache on Ike's part and it's all plug and play.

    • @twinturbotaj
      @twinturbotaj 5 ปีที่แล้ว +2

      Try the Tusk Enduro lighting kit replacement wiring harness (and components), from RockyMountainATVMC. Cheaper, LED blinker relay option. Brake/tail all wired correctly. It doesn't really matter if motorcycle or other, extend wires if needed. [The tricky signal/brake situation on the golf cart is easiest fixed with separate blinker lights in the rear.] *that Enduro harness includes wiring for two brake light switches and horn. I guess they also sell the T-Rex universal harness for UTV's slightly more expensive.

    • @tristensmart5740
      @tristensmart5740 5 ปีที่แล้ว

      I found a switch made by gm on eBay it only like $20 but it doesn't come with lights they already have the lights tho

    • @KeatonsCarlott
      @KeatonsCarlott 5 ปีที่แล้ว

      Too expensive. China bike outlets have these or in peices for max 80$

  • @theupscriber65
    @theupscriber65 5 ปีที่แล้ว

    John's voice finally dropped! Congratulations young man.

  • @fillg
    @fillg 5 ปีที่แล้ว +1

    Loved the ending :)

  • @andrew753951
    @andrew753951 5 ปีที่แล้ว

    Badass badass idea for a Deadman switch brake light

  • @peterk.2772
    @peterk.2772 5 ปีที่แล้ว

    That cart looks like fun. I can imagine a stereo system, a cooler, and a charging system, getting installed. Add some better tires with grip for off road use. Now you have a street legal beach buggy. That cart is way too fast for the golf course!

  • @jimmyunknown5466
    @jimmyunknown5466 5 ปีที่แล้ว +1

    Awesome!

  • @geecee4
    @geecee4 4 หลายเดือนก่อน

    Cool golf cart!!

  • @stephenparker8460
    @stephenparker8460 5 ปีที่แล้ว +1

    We need a update on John's truck. I see he bought some doors👀

  • @jaked5651
    @jaked5651 5 ปีที่แล้ว

    SHould have totally gone to summit racing and bought a column turn signal switch! Next level

  • @moonshineXXX
    @moonshineXXX 5 ปีที่แล้ว +14

    Hi Guys! Why don't you install a real muffler? It should sound a lot better, just a suggestion...

    • @jiimmyboy63
      @jiimmyboy63 5 ปีที่แล้ว +3

      The tubes are for testin' purposes only. Once they get it inspected they'll fix it... it'll be fine.

    • @salmonisyummiyeet163
      @salmonisyummiyeet163 5 ปีที่แล้ว +1

      They put the conduit on to pass inspection, then they will go to a straight pipe. After all, LOUD PIPES SAVE LIVES!!!!!!!!! Lol

    • @Fourcycle
      @Fourcycle 5 ปีที่แล้ว

      Almost new Harley take-off mufflers are cheap on eBay.

    • @superkart66
      @superkart66 5 ปีที่แล้ว

      Run the exhaust through a 4 cylinder car muffler, it will be quiet but have very little restriction

  • @richscott2090
    @richscott2090 5 ปีที่แล้ว +1

    It's getting there.

  • @ncdiesel2399
    @ncdiesel2399 5 ปีที่แล้ว

    Cant wait untill that thing is done you guys need to do some street racing!!

  • @fader2701
    @fader2701 5 ปีที่แล้ว +1

    thanks for the video

  • @brycebodwell6316
    @brycebodwell6316 5 ปีที่แล้ว +1

    Have the highs that y’all already have just as break lights and get 2 yellow lights for blinkers and wire them separately from the break lights like on motorcycles. They have the single break light in the center and then the blinkers off to the sides.

  • @Nordspets
    @Nordspets 5 ปีที่แล้ว

    Love this project! Just on3 tip for u guys, predrilling. Makes life hell-of-alot easier!

  • @Bigade51
    @Bigade51 5 ปีที่แล้ว

    Drill out and tap left hand thread wont back out bolt and wont need tack welding . Cool vids guys keep em up .

  • @christopherdebrusk8857
    @christopherdebrusk8857 5 ปีที่แล้ว

    Hey guys tech tip For you:
    Briggs & Stratton has a specialized tool to remove the valve springs, it doesn’t work on any other engine but Briggs & Stratton!!
    If you can find a set taking apart any Briggs & Stratton engine even with basic hand tools can take less than 7 minutes.

  • @billwatson5828
    @billwatson5828 5 ปีที่แล้ว

    Hey guys don’t forget to add rear view mirrors might not pass inspection if you leave them off. Saw your house Friday. Keep up the good work. Can’t wait till bosco beach on the 13th.

  • @joehall1114
    @joehall1114 5 ปีที่แล้ว +1

    In order to get brakes and turn out of one LED use a tail light converter they use for trailers

  • @hybiepoo
    @hybiepoo 5 ปีที่แล้ว

    With the brake lights, put them through a normally closed relay (also called a changeover relay) for each side. Then connect the left side relay trigger to the left indicator wire and the right side relay trigger to the right indicator wire. That way, when the indicator flashes, the normally closed relay will open, cutting power to the brake light. When the indicator turns off, the relay will close again, turning the brake light on. So you will get the brake light flashing with the indicators. And because of using a normally closed relay, the brake lights will work normally when the indicators are off. The brake lights will flash opposite to the front indicators, but that shouldn't really matter. To clarify for the relay. Pin 85 to GND, Pin 86 to indicator wire. Then cut the brake light wire and connect one side to Pin 30 and the other side to Pin 87a (normally closed)

  • @LoneRevD
    @LoneRevD 5 ปีที่แล้ว +2

    Ya know for like 50 bucks you could have got all the stuff in a turn signal kit to fit a UTV/buggy, lights, relay, flasher off Ebay (probably amazon I didn't bother, it'll be there). I'm sure it'll be fine....

  • @quinndowdell2785
    @quinndowdell2785 5 ปีที่แล้ว +1

    Big fan of u guys and I follow on the gram good video

  • @cassiusdante2216
    @cassiusdante2216 5 ปีที่แล้ว +1

    Put a piece of fuel line on your drill bit. That will keep your drill bit from going thru the hole you are drilling to far . The golf cart looks great.

  • @themanwithapan9313
    @themanwithapan9313 5 ปีที่แล้ว +1

    I think it would be really cool with a transmission! cool project!

  • @hybiepoo
    @hybiepoo 5 ปีที่แล้ว

    You can put a ballast resistor across the indicator lights to draw some more current, or there's some flasher cans that are designed especially for LED installs.

  • @regganshark6922
    @regganshark6922 5 ปีที่แล้ว

    You guys should double stack your head lights it would look way cooler, keep up the great content

  • @mowler8042
    @mowler8042 5 ปีที่แล้ว

    Turned out great...would be fun to see a 4wd build someday.

  • @ezzavala2308
    @ezzavala2308 5 ปีที่แล้ว +1

    I love your vids

  • @edwardwerick2420
    @edwardwerick2420 5 ปีที่แล้ว +2

    What a great ending to this video! Talk about LMAO! Hey, a little welding--it'll be fine!

  • @CoopersProjects
    @CoopersProjects 5 ปีที่แล้ว +1

    I converted my 83 Honda CB650 to LED lights, I changed the flasher to an electronic flasher. sold as "led signal flasher" they are also adjustable to change flash frequency.

  • @msack6904
    @msack6904 5 ปีที่แล้ว

    Oooohhhh, looks like a 76 or 77 camaro in the drive.....need a video on that car!!

  • @SIXPACFISH
    @SIXPACFISH 5 ปีที่แล้ว

    Well done, Isaac! When you fall off, always lay there like you're dead. It's much funnier.

    • @isaacitllbefine7231
      @isaacitllbefine7231 5 ปีที่แล้ว +1

      At my age its best to wait to see if i really hurt myself or not. Lol

    • @SIXPACFISH
      @SIXPACFISH 5 ปีที่แล้ว

      @@isaacitllbefine7231 I hear that, young feller.

  • @johngr9516
    @johngr9516 5 ปีที่แล้ว +1

    Get a trailer light module which will give you the turn signal function with the brake light

  • @robin1651
    @robin1651 5 ปีที่แล้ว +1

    They make for trucks where you can have turn signals and brakes lights front and rear and I believe they are about $40.00 dollars.

  • @owenbame1131
    @owenbame1131 5 ปีที่แล้ว +2

    Yall need more subs

  • @TIGFab97
    @TIGFab97 5 ปีที่แล้ว +1

    You can also put a resistor in the led

  • @dream2sea
    @dream2sea 5 ปีที่แล้ว +1

    Going to my first Mini Mayhem in April!!! 🏎

  • @hpmower
    @hpmower 5 ปีที่แล้ว

    A proper universal turn signal switch that mounts to the steering column would allow signal on one side and brake light on the other. Pretty simple set up with hazards can be bought for around $20 on ebay