***2" LEVELING KIT 2001 F 250 2WD 7.3 POWERSTROKE DIESEL, TIRES RIMS AND MOOORRREE***
ฝัง
- เผยแพร่เมื่อ 24 เม.ย. 2021
- In this videos am doing a 2" leveling kit on my new to me 2001 f 250 2wd 7.3 powerstroke diesel, not the best video but I tried my best.
front grille 1999-2004 f 250
www.amazon.com/dp/B08JYX8JXD?...
CAMBER BUSHING
ACDelco Professional 45K6525 Front Caster/Camber Bushing www.amazon.com/dp/B000S2IZ6G/...
2" Leveling kit
Supreme Suspensions - 2" Front... www.amazon.com/dp/B08BCQGR7S?...
Headlights
www.ebay.com/itm/1999-2004-Fo...
Taillights
www.ebay.com/itm/Ford-97-03-F...
3rd Break light
www.ebay.com/itm/FIT-FOR-1999... - ยานยนต์และพาหนะ
![รวมเพลงลูกทุ่ง 6 หนุ่มไทบ้าน ฮิตติดกระแส ชุดที่ 1 l มนต์แคน ไมค์ ไผ่ เสถียร ไหมไทย พี [Longplay]](http://i.ytimg.com/vi/GD2v1OjMw5I/mqdefault.jpg)
Very nice finished product!! Excellent job!
Thanks you very much sir.
Love what you did there. Nice work. Going to go that route on our 03 crew cab.
Thank you very much, good luck with your project 😊.
Bro no one can understand all of the time and energy spent putting all this stuff on there. Props.
Yes sir,it sure takes time and patience.
I did freshening up on 04 ram 2500 n brakes will probably be doing same with new 2 me 00 f250 as well but on the ram the spring spacer went on top
Very nice🇺🇸great choice on the gill you helped me make up my mind.
Yes sirrr, much better look than stock grille for sure.
@@oggarage3459 where can I get that grille?
@@tonymarie55 I bought my off of Amazon the link on the description should take you right to it, thanks have good day.
Looks so good 👌
My 01 f250 superduty has leaf springs, I run 315-75-16 on stick rims, slight rub on spring at hard right
Yeah mine rubbed on the front chrome bumper so I had to trim off on both sides but the way I did it you can't tell.
Im doing similar to mine. I have 31” mud terrains and doing the 2” and new front end and lights.
Yeah bro, the new front end gives it a fresh look, from the old yellow headlights and faded gray grille.
Looks Great
Thank you.
My friend, that look worlds better now. I got an old plain 01 350 retired work truck and want to do everything that you did here. Really want to wake up the front end look. These stock headlight as so dim I use bright option and nobody bright lights me back to complain.
Thank you very much, yes she looks way better now than she when I bought her.
I put led bulbs in stock housing and its 500 times better!
Nice work boss 💯
Thank you
Good video!
Truck looks sharp. Just ordered a slew of parts for mr 01 F250SD 2WD. Going a bit different setup with dream beams drop kits for the front and will use blocks to lower the rear. 5/7” should put it way closer to the ground.
Nice, I bet it'll look badass, I just installed the PHP Hydra chip last week and let me tell ya I love that truck even more now.
@@oggarage3459 Hydra is a add on. At this point I’m running Jelibilt tunes. Hydra sure wakes up the old 7.3. Running 238/100 Full Force sticks with a KC stage 3. It rips pretty good for a mild build.
Good video. The insulator that you trimmed was not necessarily. It’s purpose is to eliminate metal on metal contact - Coil Spring to Spring Seat. You installed 2” poly urethane leveling blocks. No metal on metal. Looking forward to seeing the truck when you get everything installed.
Thank you, the truck was done in that same video check it out at the end of the video .
Hey! I’m rebuilding my 2001 7.3 4WD. Doing a two inch leveling kit. I’m ordering a set of 17 inch Methods wheels.. thinking 285/70/17 which measures out to be a 33 inch tire on an all terrain BF Goodrich. I noticed your 305/55/20 setup is a 33 inch tire as well.. is there a little bit of rubbing?
There was a little bit of rubbing,I had to trim the front bumper a little bit all good afterthat
Thanks for the clear DIY video, as I'm about to order for my early 99, I'm from Southampton UK so totally on my own as we don't get the F series here.
Thanks for watching, am not very good at this youtube thing yet but thank you 🙏, and good luck with your project, if you have any questions I may be able to help, greetings to all the UK people.
@@oggarage3459 ha!! I'm the same on social media bud, Instagram, tictok but my kids show me, but TH-cam I use as upload all my cruise ship videos from drone.. Only had truck 3 weeks but truck number 7... Done same as you, got the 2005 grill fitted and one piece headlights, but they are a pain as have had to do alot of cutting to get to fit.. Next is the level kit then wheels, done the 6637 filter, have a Hydra chip, then exhaust after wheels but will struggle as most don't ship here... Thankfully everything works and serviced it.. One question though, can you fit a double din radio? Sure I did on my 6.8 SC dually but was 15 years ago so can't remember if direct fit.. I'll sub you anyway as interest in the trucks no matter, I also have a 09 LAPD Tahoe PPV 😁😁😁
@@cruisescape thanks for subscribing I've been trying to grow my channel but it takes a lot work,I work on cars a lot but don't film it most of the time,like my 2006 f 150 I painted with black bed liner looks good but I didn't get it on video,anyways in answer to your question yes a double din radio will fit but you have to order a double din dash kit so that it will fit nice and snugg and you might have to do a little bit of trimming, I know I had to trim some when I installed my stereo on my E350 to make it fit.
@@oggarage3459 thanks buddy, Actually I do now recall having to cut between radio and heating panel.. The cage kit, install kit will be an issue, so will have to import 😢
I thought about doing DIY videos but I normally throw shit, start swearing, etc plus I sound like an English South West farmer, 🤣🤣🤣Example, trying to remove original O2 sensors, 4 of the buggers on a LAPD Tahoe PPV as running rich on bank 1, they will not budge, like not a tiny bit and on the easy one at present, 2 more up nr manifold will be when a set it on fire 😁😁😁.
But anyway thank you and good luck growing your channel..
@@cruisescape well if I could I would send you the dash kit they're pretty cheap here and easy to get.
Nice color
Thank you.
Is the alignment still appearing to be good? Did you go up in rim/wheel size with the setup?
Yes alignment still good drives nice and straight and the rims are 20x12 - 24 offset, tires are 305 55 20, I did had to trim a little bit off the bumper because it would rub while backing up but is not noticeable .
It’s not crappy
What are the part numbers for the new shocks ?
Thanks for this crappie video! Just what I needed 👍
You're welcome 😊
I put 2in in the rear and 2.5 in the front and put 35in tires on. But they still rub when I'm turning, do yours do the same?
They did thats why I had to cut off some of the front bumper, no more rubbing.
Just wondering did putting in the spacers make your front end really stiff
No rides the same.
By any chance do you have part numbers for what you used? I am planning to do this on my 99.
Click on the description and it'll show you the parts I used.thanks .
What grill did you go with? Did you have to modify anything for the grill to fit? I have a 04 and what to change out grill
Thanks for watching, I left a link to this particular grill on the description below just click on it and it'll take you straight to Amazon. 👍it should fit a 99-2004 model, no cutting or any modification needed.
Thanks for the video. I have the same truck in the same color. 😁. What size tires and wheels did you install.
Thanks, rims are 20x12 - 24 offset and tires are 305/55/20👍
What was the camber setting or part you used for this lift...i lifted mine 2.5 inches and it has a lot of positive camber....?? Please help
Yes click on the link below and it will take you to the camber bushings I used they're ACdelco brand
@@oggarage3459 thank you I already ordered them. Hope it works.
@@XqeDiosxqe ok 👍 good luck.
Great video quick question does the truck actually sit level or does it still have some leaning look? Thanks in advance
Naw is better than it was before but still has a little bit of leaning.
@@oggarage3459 So do you think it would have been better to do more than 2"?
@The 7.3 Powerstroke guy probably but I couldn't find anything more than 2" for a 2wd.
Does that kit work on the twin I beam suspension 2wd? Thks in advance..
Yes, mine is a twin beam 2wd.
I have the same truck and wanting to fit 22x12 atleast on it do you think I could fit those with this leveling kit on 33 inch tires ?
Mine are 305/55/20, and I had to trim both sides of the bumper because they would rub.
Dang yeah I’m having a hard time finding a 4 inch lift for it 🤦🏻♂️ wanting to find a 3 inch leveling kit for front and back
@zackestes5958 If it is a 2WD, I'm pretty sure they don't make lift kits, only leveling kits. I looked everywhere and wasn't able to find any.
@@oggarage3459 yeah it is 2wd … I think I found a 6 inch lift can’t remember but that’s the only thing I could find did you have to cut a whole lot ?
@zackestes5958 Not much, it wasn't really noticeable .
What grill and what size rims and tires please?? That thing looks bad ass
Thanks rims are 20x10 - 24 offset tires are 305 55 20 the grill ECOTRIC Front Grille 2006 Style Compatible with Ford 1999-2004 F250 F350 F450 F550 Super Duty 2000-2004 Excursion New Grille Chrome Mesh Style a.co/d/3lgT970
Hey, i did the same front lift on mine. However, i have a terrible camber. I’ve brought it to the alignment shop. They can’t seem to get rid of the camber. I have the adjuster camber bushings (the big ones) my alignment shop installed them. So they are aware of what they are and what they do. Any tips for me to fix camber would be helpful. The truck is currently on jacks trying to figure it out before i just remove the lift blocks…
The camber nut I used is and ACDelco,my truck was also camber before the alignment but the shop I took it to didn't have any issues doing the alignment,she drives nice and straight.the link to the camber nut I used is in the description, am not sure if the camber nut you used is the problem it may be.
Also the leveling kit I bought was a 2" and it came with shocks that are supposed to be longer than the stock ones.
What size wheels and tires did you use and do they rub?
305/55/20, +20 offset .yes, they did rub a little bit. I had to trim the bumper a little bit.
@@oggarage3459 they look great, I just did the leveling kit on my 2wd 7.3 today, next is tires 🛞
@betotrokas it definitely changes the looks of the truck. Good luck with your build Beto.
Could u drive it right after the lift was out on?, are did u have to bring it straight to get a alignment?
I drove it to the alignment shop about 8 miles aways and it felt ok to drive .
@@oggarage3459 does the wheels look bad after ?
@@TL-mi4zq no wheels looked great.
@@oggarage3459 hello and what was the camber caster you used ?? What degrees ??
Love the fitment. What are the spec on the wheels? Thanks
Thanks,wheels are 20x12 -24 offset and tires are 305/55/20.
@@oggarage3459 thank you
@@oggarage3459 no rubbing on full locked turns?
@@boosted_e3044 it did rub a little bit but I trimmed off the chrome bumper a little bit, the way I did it you can't tell by looking at it.
How did you do the conversion to coil spring i really could use some advice I plan to do it as well
I didn't convert it to coil springs, I just added a 2" leveling kit.
Good video thank you! What camber bushings did you use?
Thanks, not the best but thank you, I used ACDelco part # 45k6525 from Amazon.
Okay cool, did you have trouble getting it aligned? And did you grind the spindles?
@@Blchamr988 no grinding at all and the shop I took it to did a good job with the alignment it drives straight as an arrow.
@@oggarage3459 that’s awesome man the truck looks bitchin!
@@Blchamr988 thank you, it definitely gave it a different and more aggressive look I think.
What size spacers do you have
You mean for the wheels?? No spacers
Sigue funcionado al cien?
No le han fallado?
A cuanto km/h lo has manejado?
Son confiables?
Buen dia
Buenos dias, todo bien hasta el momento no le falla nada yo nomas la manejo local pero estas trocas con el motor 7.3 so las mejores trocas de diesel que ay. No compres la 6.0 o la 6.4 muchos problemas la 6.7 un poquito mejor pero la 7.3 es la mejor. Buen dia.
What size tires can you fit? 35s?
These are 305/55/20 which are equivalent to 33.2x12R20 and I had some rubbing at first but all good after trimming some of the front bumper.
Do you have twin I beams or mono beams?
Twin I beam
Did your leveling kit say “will not fit twin ibeam”? All the ones I find say this. I just need to know if they really do fit
What rims and tires are those sizes please. Looks awsome
Rims are 20x12 - 24 offset tires are 305/55/20. Thanks
What size rims and tires are those?
20x12 - 24 offset and tires are 305/55/20.
how can you align it
Took it to an alignment shop.
🤙🤙🤙
👍👍🙏
Wow thanks dude you maded my day✌✌
Pretty sure you need to loosen the inner I beam bolts and retighten them at your new ride height. Otherwise the bushings are under constant tension
You think so.
@@oggarage3459 I do. Most factory rubber bushing flex with suspension movement. The center pins dont rotate in the bushings like after market urethane, or solid bushings do. Just tryin to help. If the bushings are actually under constant tension they will fail prematurely and lead to alot of noise and sloppy steering. The control arms also need to be loosened and retightened while the truck is sitting on the ground at the new ride height.
@@edjackson4389 that makes sense, thank you for your suggestion 🙏.
@@edjackson4389I’m not yet familiar with suspension work on this truck, could you give a quick explanation on where those bolts can be found? And when you retighten them, would it be when the truck is sitting on the ground like you specified with the control arms? If yes, i guess the truck is never even jacked up at all for this part and it’s just a matter of cracking the bolts loose and just torquing them back down again with the truck never leaving the ground? Long questions, but I’d appreciate any feedback
@@thejman99 It will be the inner mount bolts on the Ibeams where they pivot. I get them loose and bounce the truck by pushing on the front bumper to make sure they settle into their new position and retighten them. All this needs to be done with full weight on the front suspension (not jacked up).
What size tires are those?
305/55/20
What size tires?
They are 20x12 - 24 offset and tires are 305/55/20
Where you get that grille?
Amazon
What year and have the link?
@Angel Lopez 2001 yes link to this grille in the description below, sorry for the late response.
what size of the wheels and tires
They are 20x12 -24 offset and tires are 305/55/20.
Thx for info!!
@@sergiobueno2393 your welcome.
Did you notice a difference in the ride while driving?
Yeah a little bit rougher due to the fact that I have off road tires other than that it rides nice and straight.
Tire and wheel specs?
Rims are 20x12-24 offset and tires 305/55/20.
Please link parts
Thank you for the comment, l will try and do that today for you, what parts do you want links to?
Tanks sor 👏
I have one just like yours but I put a ford f350 differential and I stretch with it 25 thousand pounds 7.3 It is a machine for work it does not run fast they are somewhat slow to get out but the truth is that I do not change it for any of the current market 25 thousand or 27 thousand for an old engine is a beast I walk a mini 5 car trailer
@@raidelricardvxo9653 yeah they are beast trucks I love mine , I recently installed the php hydra chip on mine and it woke her up big time, she is fast very noticeable.
Half stepping lift a truck thts not 4whl. 🤯😂
It's a leveling kit bro not a lift
What size tires are those?
305/55/20.
@@oggarage3459 do they rub?
@hectoramezquita2004 they did rub a little bit. I had to trim a little bit off the bumper.