97 5.0 Ranger swap, installation part 2, first start
ฝัง
- เผยแพร่เมื่อ 1 ส.ค. 2023
- Hey! On this installment of SBS Auto, we have the 5.0 in the 97 ranger, and need to get the intakes and accessories on the engine, hook all the lines up, fill the fluids and start this thing!
- บันเทิง
Awesome swap. Im taking notes. Looking at a donor explorer right now debating on getting this started.
Chris you rock!!!!
Much appreciated! 🙏
1998 ford ranger with a ford explorer 1996 5.0 and a 5 speed transmission from a mustang by t5 . need help with wiring
Did your ranger have return style fuel rail?
www.therangerstation.com/tech/swapping-an-explorer-5-0l-in-to-a-1998-2011-ranger/
The vss should hook right up, and the nuetral safety switch i would just get rid of. Remove the pin behind the neutral safety switch with a magnet. And tie together the nss wires in the trans harness to bypass it. Then make sure u have an operational clutch safety switch.
U can delete the range sensor and rear o2 sensors if u want to.
"The EFI guy" has a youtube series about the explorer harness and how to bring the 2 fron o2 sensors furthur up in the harness for long tubes or just more accessibility.
My 97 ranger still thinks its a 96 explorer as far as wiring and ecu etc
Did you modify anything about the Ranger's harness?
Yes, i go over which harnesses i use in the video, and the changes needed. Which include the alternator harness termination, where you have to put a loop terminal connector on the white wire and run it to the large post on the alternator.
I obviously used the explorer 5.0 engine harness, which i trimmed down and removed the rear o2 sensors all the way to the ecu, also removed the transmission range sensors etc.
To learn more about the harness alterations you can watch "The EFI Guy" he has many videos about the 5.0 explorer harnesses and differences between certain years etc..
I show on screen in white text which harnesses to use.
These videos only pertain to a 2wd 95-97 ranger fyi.
The explorer 42 pin connector plugs right into the ranger body 42 pin connector.
And the only other thing is you have to connect the NSS wires in the trans harness together.
Hello friend, I am doing a swap on my Ford Ranger, I have a question for you, what headers did you use?
What heads do u have?
What year is your ranger?
4x4 or 2wd?
What transmission?
About how long did it take from removal to first start?
Well all in all took several years of gathering parts. I work 60-80 hours a week, so only was able to work weekends. And i had specific goals.
But from getting the 3.0 out and 5 0 engine in and running just about 2-3 days. 15-20 hours of work.
But i rebuilt the engine and transmission prior which adds a ton of time.
so i can use the 4.0 frame side motor mounts if i use ricks plates on the engine side motor mounts?
Sorry, restructure your question.
@@SBS_Auto i have a mazda b4000 cracked block what motor mounts do need to use to swap a v8 in it
@@gravedigger8 what year?
@@SBS_Auto 1994
@@gravedigger8 that's a completely different animal.
My videos are only for 95-97 ford rangers.
What headers are you using?
I go through the complete list of parts in the 97 5.0 intro video on a whiteboard.
For THESE gt40 heads, i used 1966 mustang tri-y headers from ebay.
These work with 96-97.5 gt40 heads only
They will not fit 97.5-2001 gt40p heads.
Man I’m trying to do this rn to my ranger I have a 1998 ranger can I ask how much you spent thinking bout goin to junkyard and getting motor
These videos won't really help for a 98+ swap.
I will be doing a 98+ swap in the next couple of months, though.
I spent around 8-10,000k, bought 4 donor 5.0 explorers, all the swap parts, ricks engine plates crossmember etc...
I have a video that is titled 97 parts list, where i go over everything needed for the swap.
98-2000 rangers are SUPER EASY but you need at the PATS security hardware, key, modules etc.. to make it work.
@@SBS_Autois the reason is it was 8-10k was cause of the 4 donors? I’m looking to do the swap to my 2000 ranger and I’m looking for a donor. If I may ask why did you need 4?
@agc9774 i got all 4 of my explorers for less than $2000.
@agc9774 i bought 4 because i wanted a ton of parts, and the different years matter for different reasons, heads, wirings, etc... and 2 of the explorers had blown engines.
@@SBS_Auto i see you have a new video looks like a 2000 ranger 5.0 swap? If so I’ll definitely be following
What lower radiator hose did you use
96 explorer 5.0
What headers do you have on it?
For a 95-97 ranger with 96 explorer gt40 heads, im using
1966 Tri-Y long tube headers.
www.ebay.com/itm/335109240439?itmmeta=01HVZHWNVEE9BBJHRG40VRPQ8C&hash=item4e06113677:g:OhoAAOSw0FJfKoik&itmprp=enc%3AAQAJAAABIBcc6H6e0ktxx4TMkxrvhUjWcFsHOf7RWuJ438Rs2QW6%2FjKJZKq0GOXbL4w%2BzxMdU%2FEgsQpjgW1TtrgrEVJBZkSB5igI15cYujbrzuvCHlchu4PdVm6pli5hg7cTA3sXnZU1LhsiWhfgUq07hFbP5Hj%2BgfpM8bP0q5lh%2FPhPNNgHCs2bVxxeUasI%2BhvZGLHhRS1HVZ41LcDYbVxvbj5LmuOpWMXTMNuB1moiYxSCnk30brqbIAltJ3fkhocY8BsZwH3JczAS6inCnau2jfc3BQSURe2Hi6hzbze9CQJzHZ3eI5QwTkjR0m4pqKSzq3Y3ECRTmO4Nuxz97uGT7T62jey9NGeE79m3k3lklSJ8aCvdVvMLWgIyvmET%2B%2FdDO4ZmGQ%3D%3D%7Ctkp%3ABFBM5t3y8d9j
These tri-y headers will absolutely not fit gt40p(4-bar) heads from 97.5-2001 explorers. Only GT40(3-bar) heads from 96-97.5
thats a diode
H'what lol
Oh the coil diode ya. It's a noise/interference canceler or whatever.
She ate a baby 😢
😭😭🤣🤣🤣🤣