Bardwell does a better job with journalistic integrity than almost any TH-camr and certainly most big outlets. This is why you're one of the most beloved creators in this hobby!
It's actually so refreshing to see someone admitting when they are wrong, and factually correcting things and moving on. I think every hobby needs a Joshua Bardwell, and FPV community is lucky to have you. As a noob to this hobby, your content is absolutely essential to avoid tons of mistakes. /me is off building your 5" drone :)
“If” DJI somehow enabled remote ID in their products, they would have to make it so they user could enable/disable it. This is because many people are using their products (goggles/air unit) in sub 250g drones for recreational purposes where RID is NOT required by the FAA.
I’ve mirrored my phone to the tv 📺 no cables , plan to add a tv into my trunk mounted . Or even put on a table . This works I flew outside watching my home tv .
In winter if the goggles are too cold, they fog also from the heat of your face. I use hand warmer to warm the lenses if they are too cold and are getting foggy.
Another important point missed. O3 system needs an armed signal to output full power. Same for upgraded vista type AU as well. This makes O3 system useless for wings without a FC.
FYI I believe that that the newest beta firmware (the one that gives you backwards compatibility with vista) for the goggles (and therefore likely the air unit) might disable the ability to use the hacks, so we might lose that as the firmware updates roll out.
@@andytroy oh okay, sick news! No way they would be selling O3 in EU without any - user config way against the rules - option to increase for normal range.
This is understood. Just goes to show that we're all learning about this new product together and while we might encounter some concerns, it's great to discover solutions and get best results later on
@jan doodle strange how ya keyboard warriors always think they know what's best for someone else. Seek knowledge instead of spreading vitriol. I love my job, quitting the rat race was the best decison i ever made.
A quick and dirty way to share the video via HDMI is screen sharing via a Chromecast dongle. You can also use an Android TV box for an HDMI out. Runs all the apps needed, including analog apps like FPV viewer. You can also plug up an OTG analog receiver right to the box.
@@JoshuaBardwell I'm also curious if you were to use a USBC dongle that has HDMI out but also a USBC 5gbps input instead of sending the signal USB c to usba to USBC like you did in your video
The reason HDMI dongles don't work with DJI Fly is because the goggles and phone have to reverse the USB host and gadget roles due to the Android Accessory Protocol. Fly should work if you plug the dongle into the Goggles side, but obviously HDMI won't do anything like that.
One thing that you didn't get wrong but didn't mention is if you are new to HD and have bought into the new system with Goggles 2, unless you bought the goggles from DJI directly you will be stuck staring at your 03 air units sitting on your bench until mid January because DJI decided to withhold their retail partners stock until then. Guess they are hurting for money and really needed to get those initial sales....🤦♂️
Hey Joshua, please include the link for the USB-dongle you are using on Android devices for HDMI out with affiliate link. I am not the only one who would go for it after watching this video I believe. Cheers!
Hey Joshua would it be possible for you to make a video about the current dangerous issues with O3 and Goggles 3 with latest firmware to warn all people who did not notice about the fail of connection during flights? I got that problem several times like many many other users. If DJI won‘t warn there customers so it is really important that we pilots help each other out! Thx and keep up your really amazing job here on TH-cam.
After testing the 03 today, i was pleased with the goggles dvr view and also the penetration of the video signal, it was not going blocky in the trees where my vistas usually do, the image in the goggles had no jitters but the footage from the 03 air unit had jitters when using rocksteady, i read that this can because the esc's are at a similar frequency, i have 16bit esc on my aircraft so it is not possible to change this as they are not 32bit, well i think this may defeat the object less stabilized video with stabilization on! also the 03 seemed to stop my gps from finding satellites where i had no problem of getting a link with my previous vista, this maybe down to the gps module mounted above the camera and maybe The 03 camera is giving out noise where as the old camera did not affect it. I may upload a comparison video of the dvr and the 2.7k 60fps recording with the inbuilt 20gb storage so not an sd card issue. I hope these issues can be rectified, don't want to think i have wasted money and time.
hope Next product idea for used with the new DJI O3 Air Unit : a little box receiver multi O3 Air Unit (for the strong immersive spectators) with : -- max : 4 receiver internal, each receiver must pairing on one slot on box. -- output : 4 hdmi 2.1 for individual screen. -- 1 Gigabit Ethernet PoE for diffuse 4 stream full resolution 1080p 120fps. (network and use OBS for example, and can setting the iso, speed frame, optic ? because bidirectionnal information ?). -- box dimension : smallest bossible. - no screen, no other else ... for better low prices plzzz 😁😁 DJI you ROCKKKKS
I'm glad I got the information I was curious about. The part about nuclear and the part about the output of Jimmy Lee will be the biggest issue. I watched the video well.
There seems to be a bunch of small features that they should implement i.e clean video output option. I guess feedback is just provided via a support ticket.
Love it that you corrected mistakes and added info. Seems that the new beta killed the hack again. Won't buy it if it can't be hacked... Just had a thought: If you update or active the Air Unit using a VPN "being" in the US shouldn't the Air Unit think to be there and switch to FCC?
Very helpful and appreciative of all the work you do. Some thoughts on hacking the unit to obtain additional channels and cautionary tale. The frequencies these units operate at is within the wireless networking range and has been limited to what appears to be non-overlapping or least interfering frequencies. Either you could be causing your neighbors to become very annoyed with you, or perhaps negatively affect your own wifi without even realizing it IMO
There is latency information in that srt file. Below the timestamp, there is a “DiffTime” and that is the latency. Actually the timestamp itself shows the latency, you just ise the second timestamp and minus the first one.
It seems like only the goggles can truly know the final latency since only they know when a packet was finally received. But in the other hand, only the vTX knows when a packet was sent, and it's not like they sync their clocks or something. It's a bit of a mystery.
Mads has shown in latest firmware even with FCC hack you don't get full output power outside of the States. You can't go around it because DJI app checks your sim card to see where you are.
please detail your discovery on hdmi signal out from o3 air unit / V2 goggles to a monitor or second pair of goggles : how to what other devices are needed. thank you
Hi Josh, is the O3 exclusive with DJI's goggles? I'm new to the game and want to put together a high quality FPV camera that can function also for action filming. 1. Can you use a third party video receiver with the O3? like a Moneagle monitor? 2. Are there any video systems that are encrypted / secured end to end? I don't like the idea of anyone tuning in to my vtx and spying on me. Thank you
You can only use the DJI Goggles 2 and DJI FPV Goggles V2 with the O3. Nothing else. The O3 air unit is not encrypted as far as I know (maybe it is I'm not sure) but the O3 system doesn't have "audience mode" where anybody can tune in. You have to manually enable the option to broadcast your signal to viewers.
@@JoshuaBardwell Thank you for your quick response. Well that nips the O3 in the butt for me. FPV world is a bit confusing. Thanks for you videos. They're helping. Can you please help point me in the right direction. I'm looking for a digital FPV camera VTX system that is high end (4K) and has a 2 or 3 axis R/C tilting gimbal. Similar to Mini 2's camera, but better, and can fit in a 4" quad LR cruiser. Have you seen anyone hack the video feed out of an action camera to VTX as a FPV feed, while the camera records 4K video to a microSD? Is video transmission secure? Can anyone tune into your drone's broadcast channel? I'm looking for vtx privacy. Thanks again. You rock dude
Very helpful in-depth info, the O3 is very interesting indeed! Been a while since I was serious about my fpv setup but this one's making me so curious.
MadsTech said that the FCC hack doesnt work on the latest beta firmware... and that the channels you can see are not related to the transmit power... this is VERY confusing. perhaps you can dig more into this.
DJI's Fly app doesn't work without their controller. If you are using your own controller you are SOL for a live feed. Correct me if I'm wrong, but I can't get it to even acknowledge the goggles 2 and 03 Air unit.
I get a feeling they are not going to fix the lost bind bug - because, if they port the vista and air unit connection to the V2 goggle firmware, they likely ration that you should not need to boot into the older DIY side OS anymore. 🤷♂️
Wonder why there is gps coordinates that are all 0’s at 19:17 when you show the set file from the o3 air unit.. so they planned something to give it the gps info in the future.
6:34 that "something" is actually nothing. It's just the way old AU/Vista pairing works. Only the goggle ID is used. A little different than newer gens where pairing is two-way.
Great video Joxhua! I have noticed that the DJI FPV Remote Controller 2 will work with the DJI O3 Air Unit however the Expo/Gain and Button options are not selectable. This makes it very difficult if not impossible to fly with the DJI FPV Remote Controller 2 and I am forced to install my Crossfire system.
My goggle2 hAve active a fan for fog. I remember the first white dog goggles dji had. I am one of the persons that couldn’t use it. Cause I sweat a lot in my face. This is a none existing problem in the goggles 2. (Not the small ones to the Avata) but the bigger that was with the dji fpv Drone 😊
O3 died just after 3rd short flight. Light (GREEN/RED) turns on and quickly turns off. It was working fine (activate/update/bind/link).O3/Goggles V2/RC2 link went off and LED light on O3 unit turned off. Now when powered on via FC (GEPRC F722 40A AIO, 6S battery) - LED on O3 comes on for a split of a sec, goes off and then nothing. My drone got crashed because O3 got off while in the mid of the flight, i lost goggles video feed. Then if i remove the battery and plug it back in the green light comes and goes in a second. Connecting O3 directly to the computer via USB cable (same computer, same USB port/cable that used to work before): 1. O3 LED turns GREEN for 2 - 3 sec 2. While the LED is on, Windows Device Manager shows "Unknown device" 3. O3 LED turns off 4. Unknown device disappears from device manager 5. DJI Assistant 2 does not see O3 anymore 6. O3 internal storage does not show up in Windows file explorer 7. O3 get a little bit warm (not hot) if I keep it connected to USB cable This exact same problem someone else had and posted on DJI forum. and now i m having the same issue. Who else do have? any fixes?
Josh Prince of FPV could you do a DJI round up? I have a set of goggles v2 and I dip in and out of the dji news is there still firmware updates that people shouldn't do like in the past or is it all safe now??
That is the srt file for the air unit. What about the file for goggle's recording? Perhaps the goggle's recording has the latency and the other records on a separate srt file?
That's what I'm telling you. There isn't one on the goggles. Except if you are using V2 goggles then it's there as usual. But on Goggles 2, it's not there.
I appreciate you bardwell cause you can man up and be honest. So when I say this it doesn't apply to strictly bardwell. All these people doing reviews are in such a hurry do drop there video for views and product link in description. I get it this is how you make your money. But ooofff I feel horrible for the people who rushed right away on stuff and then had issues. Like the avata drone. Glad I have patience but then again I'm always behind catching up. May not be such a bad thing. Again props to this man for making another video but to late for alot if there's things now that's a deal breaker
Hi great video BTW, I have a crazy question, is it possible to use this camera as an action camera only, without video transmission. and powered from the USB C port, I like the size of this unit and it would be great to mount the camera on a helmet and stick the main unit on the side of the helmet and power through a USB connection, and the price is great, so is it possible to opperate this without goggles. In other words power up and start recording from your phone ??. Also would the on screen data be recorded or can it be turned off on the internal video recording. Thank you in advance.
Great video, thanks for this. One question, at time 20:20 the explanation of the FOV does not line up with what you are showing. maybe I am mistaken, but I'd be grateful for some clarification here. What I am noticing is the FOV changes when you arm if using > 60fps. For example, if I am in 4:3, 2.7k, 120fps, when I arm, the image FOV goes down (zooms in). If I select 100fps it zooms less, and at 60fps there is no zoom, the image looks same as when not armed. The same is true if using 1080, 120fps crops most, 100fps less, then 60fps does not crop at all. Again, this only happens at the moment you arm. after you disarm, 10sec later of so and it goes back to wider FOV. Has anyone else noted this. I am running o3 firmware 01/02.00.00 (latest as of MAR 10. 2023) , on V2 googles (firmware 01.06.00.00).
People are suspicous of DJI for a reason I was forced to update my mini 2 around october 2022 and my altitude was limited to 500 meters. no limits exsisted beforehand.
There are too many comments to check, but if you can get video to your phone, can you cast your phone to a TV? I have a 55 inch TCL Roku TV that I can cast Apple devices like iPhone and iPad to it. So essentially I can cast the goggle view if it's appearing on my iPhone, correct?
After putting the code in cli in betaflight, to use the osd the quad did not recognise my crossfire receiver no matter what uart it was on, I figured I'll try my crossfire on sbus then it recognised the receiver, so having to use crossfire on sbus.
Great video. The power difference between FCC and CE affects both Controller and goggles or only one of them? Which one? I’m about to buy a cinebot30 O3 in ELRS version. Tks, brother!
Regarding the video out for the o3 unit is this only for android as I’ve tried and tried on iPhone and just get device not supported on the v2 Googles🤔
again, so great review, but i'm still a bit confused if the goggles 2 are supporting the DJI Air Unit and vista? in some quite recent other review, it is claimed it is not supported, even on DJI website if i'm not wrong.
the FCC hack does not work on the DJI Goggles 2 with consumer firmware - mads tech taked about it in his new video unfortunately .. deal breaker for me in the EU!
When this first came out I guess I assumed that they were a standalone video transmission system that could be used on any fpv platform. Be it a drone or an airplane or even a radio controlled car. I would imagine that it can be done but could this be used with just the goggles for video transmission while using say another company's radio and receiver on a car?
Yes you can use another controller and receiver. But if the O3 is not connected to a flight controller it won't go to full power and performance will be poor.
really enjoy these much more in-depth videos. It shows just how much DJI dropped the ball on so many aspects. I'm still rocking the V1's, I have plenty of vistas and replacement cameras and seeing how DJI is being waaaaay too Apple, I won't be buying anymore DJI products for some time.
Hi, my airunit O3 is very hot, I can't figure out how powerful it works. I have the FCC hack installed. The power meter showed ~4w in lower state mode and ~12w without it. Can I see the transmission performance in some software? I didn't observe dynamic power changes. The power consumption doesn't differ when in close proximity, even when the signal has almost disappeared. I don't like this approach because why should my airunit O3 operate at maximum power when it's only 5 meters away from me?!
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
The healthy dose between honesty and accountability is so hard to judge. Don't ever beat yourself up you're appreciated.
i would really appreciate a 20 minute video off fardwell beating himself up. 2 minutes would also be very wel recieved.
Bardwell does a better job with journalistic integrity than almost any TH-camr and certainly most big outlets. This is why you're one of the most beloved creators in this hobby!
He makes a lot of efforts to sell and makes money - and we all know it. He is an influencer of the mainstream “DJI”.
And he also has a great sense of humor 😁
It's actually so refreshing to see someone admitting when they are wrong, and factually correcting things and moving on. I think every hobby needs a Joshua Bardwell, and FPV community is lucky to have you. As a noob to this hobby, your content is absolutely essential to avoid tons of mistakes. /me is off building your 5" drone :)
“If” DJI somehow enabled remote ID in their products, they would have to make it so they user could enable/disable it. This is because many people are using their products (goggles/air unit) in sub 250g drones for recreational purposes where RID is NOT required by the FAA.
You are the best gift to FPV
I’ve mirrored my phone to the tv 📺 no cables , plan to add a tv into my trunk mounted . Or even put on a table . This works I flew outside watching my home tv .
In winter if the goggles are too cold, they fog also from the heat of your face. I use hand warmer to warm the lenses if they are too cold and are getting foggy.
Good tip.
Building my first drone, didn't know anything abt drones a week ago but now I'm building my own, couldn't have done it without Bardwell.
Another important point missed. O3 system needs an armed signal to output full power. Same for upgraded vista type AU as well. This makes O3 system useless for wings without a FC.
FYI I believe that that the newest beta firmware (the one that gives you backwards compatibility with vista) for the goggles (and therefore likely the air unit) might disable the ability to use the hacks, so we might lose that as the firmware updates roll out.
Purely speculative
Don't worry, there will be new hacks
@@creationlabsinc.189 Check out mads tech, he shows that the hack doesn't increase the power as it did on earlier firmwares. I'm pretty bummed.
@@aviatoFPV Check his comment underneath the video, he says he got it working again
@@andytroy oh okay, sick news! No way they would be selling O3 in EU without any - user config way against the rules - option to increase for normal range.
Thanks for the updates, Joshua! 😊
Stay safe there with your family! 🖖😊
You will always be the man. That will never change.
This is understood. Just goes to show that we're all learning about this new product together and while we might encounter some concerns, it's great to discover solutions and get best results later on
If you make it an hour n a half long, i'll still watch it all 🙌
@jan doodle I'm full-time FPV. I watch bardwell while I work. Seek knowledge so you wont be ignorant 👍
@@jandoodle6769 someone sounds jealous about their life choices 🤣
@jan doodle strange how ya keyboard warriors always think they know what's best for someone else. Seek knowledge instead of spreading vitriol. I love my job, quitting the rat race was the best decison i ever made.
Missed opportunity to say “I’m Joshua bardwell and I learned something today” 😂
0:21 I watch 5 hour podcasts, hit me with the longman 💪🏻
Thanks. I'm the sort of guy that likes to deep dive into specs, so this is great.
A quick and dirty way to share the video via HDMI is screen sharing via a Chromecast dongle.
You can also use an Android TV box for an HDMI out. Runs all the apps needed, including analog apps like FPV viewer. You can also plug up an OTG analog receiver right to the box.
This may work for casual viewing, but for those looking for a high quality feed, including professionals using DJI FPV on set, it's not usable.
@@JoshuaBardwell Oh, I totally agree and that's why I prefaced quick and dirty. Lol
@@JoshuaBardwell I'm also curious if you were to use a USBC dongle that has HDMI out but also a USBC 5gbps input instead of sending the signal USB c to usba to USBC like you did in your video
The problem with the adapter is that the USB host device switches when the DJI fly app is used. It's not about the speed.
Cameras mounted on stiff 36 inch long 18 ga spring wire can absob all the vibration . I always use a silicone o ring to mount it .
Thank you for the clarification. Good to know more about the O3.
Surely DJI will update the HDMI so you can have a clean feed? Makes sense for broadcast
The reason HDMI dongles don't work with DJI Fly is because the goggles and phone have to reverse the USB host and gadget roles due to the Android Accessory Protocol. Fly should work if you plug the dongle into the Goggles side, but obviously HDMI won't do anything like that.
Do you think this new system will be your new daily driver?
Ohh yeah 😃😃 My o3 is arriving tomorrow... And I am happy that I have DJI RC PRO remote to have clean feed from V2 thru HDMI ))
One thing that you didn't get wrong but didn't mention is if you are new to HD and have bought into the new system with Goggles 2, unless you bought the goggles from DJI directly you will be stuck staring at your 03 air units sitting on your bench until mid January because DJI decided to withhold their retail partners stock until then. Guess they are hurting for money and really needed to get those initial sales....🤦♂️
Order from DJI, they ship super fast.
@@fpvgiggles and you get 1% back for future orders
DJI hurting for money lol
Hey Joshua, please include the link for the USB-dongle you are using on Android devices for HDMI out with affiliate link. I am not the only one who would go for it after watching this video I believe. Cheers!
Hey Joshua would it be possible for you to make a video about the current dangerous issues with O3 and Goggles 3 with latest firmware to warn all people who did not notice about the fail of connection during flights? I got that problem several times like many many other users. If DJI won‘t warn there customers so it is really important that we pilots help each other out! Thx and keep up your really amazing job here on TH-cam.
I think what you said about the v2 goggles not having a fan is incorrect.
I was thinking the same thing. I have a pair of V1's and V2's and both have a fan. It's hard to believe the Goggles 2 were designed without a fan.
The new goggle 2 have no fan.. v1 and v2 have a fan 👍
I think you said the screws were M2 on the air unit. I believe they are M1.6 used to replace with longer screws to screw the air unit to frame.
After testing the 03 today, i was pleased with the goggles dvr view and also the penetration of the video signal, it was not going blocky in the trees where my vistas usually do, the image in the goggles had no jitters but the footage from the 03 air unit had jitters when using rocksteady, i read that this can because the esc's are at a similar frequency, i have 16bit esc on my aircraft so it is not possible to change this as they are not 32bit, well i think this may defeat the object less stabilized video with stabilization on! also the 03 seemed to stop my gps from finding satellites where i had no problem of getting a link with my previous vista, this maybe down to the gps module mounted above the camera and maybe The 03 camera is giving out noise where as the old camera did not affect it. I may upload a comparison video of the dvr and the 2.7k 60fps recording with the inbuilt 20gb storage so not an sd card issue. I hope these issues can be rectified, don't want to think i have wasted money and time.
NOTE: using V2 when you switch back to Vista type air units you can not use audience mode until you bind with a Vista.
The in-goggle view shown seems to match the wide FOV not the normal. Is this what you meant?
I am waiting for the OS 4 which is supposed to be cross compatible with HDZero.
hope Next product idea for used with the new DJI O3 Air Unit :
a little box receiver multi O3 Air Unit (for the strong immersive spectators) with :
-- max : 4 receiver internal, each receiver must pairing on one slot on box.
-- output : 4 hdmi 2.1 for individual screen.
-- 1 Gigabit Ethernet PoE for diffuse 4 stream full resolution 1080p 120fps. (network and use OBS for example, and can setting the iso, speed frame, optic ? because bidirectionnal information ?).
-- box dimension : smallest bossible.
- no screen, no other else ... for better low prices plzzz
😁😁
DJI you ROCKKKKS
No fan is a deal breaker for me. Kinda sucks was going to get them.
Props (no pun intended) for the updated video 😊
Bardwell da goat
Excellent video.....Thank you.
Is the O3 compatible with DJI FPV goggles V1?
I'm glad I got the information I was curious about. The part about nuclear and the part about the output of Jimmy Lee will be the biggest issue. I watched the video well.
There seems to be a bunch of small features that they should implement i.e clean video output option. I guess feedback is just provided via a support ticket.
Love it that you corrected mistakes and added info.
Seems that the new beta killed the hack again. Won't buy it if it can't be hacked...
Just had a thought: If you update or active the Air Unit using a VPN "being" in the US shouldn't the Air Unit think to be there and switch to FCC?
Nope, the DJI app checks your carrier and stuff, you can't activate without sim card.
@@aviatoFPV Dang!
That makes no sense since activation is done on pc and doesn't require you to plug in your phone. Right?
Very helpful and appreciative of all the work you do. Some thoughts on hacking the unit to obtain additional channels and cautionary tale. The frequencies these units operate at is within the wireless networking range and has been limited to what appears to be non-overlapping or least interfering frequencies. Either you could be causing your neighbors to become very annoyed with you, or perhaps negatively affect your own wifi without even realizing it IMO
There is latency information in that srt file. Below the timestamp, there is a “DiffTime” and that is the latency. Actually the timestamp itself shows the latency, you just ise the second timestamp and minus the first one.
Are you sure?
How is the air unit supposed to know the latency at the receiving end?
If you look at them, 33-33-34ms, it just tell you the delta T between log entries
It seems like only the goggles can truly know the final latency since only they know when a packet was finally received. But in the other hand, only the vTX knows when a packet was sent, and it's not like they sync their clocks or something. It's a bit of a mystery.
Mads has shown in latest firmware even with FCC hack you don't get full output power outside of the States. You can't go around it because DJI app checks your sim card to see where you are.
Yikes.
Does USB out work with DJI RC-PRO controller? Thank you for your video
please detail your discovery on hdmi signal out from o3 air unit / V2 goggles to a monitor or second pair of goggles : how to what other devices are needed. thank you
I think that HDMI adaptor does not give enough power to give you hdmi out. You might have different results with a more professional monitor
Hi @JoshuaBardwell
Thx for the great update
Potato / Avata same issue when switching, always needs to rebind...
Cheers
Evel-Knievel
Hi Josh, is the O3 exclusive with DJI's goggles? I'm new to the game and want to put together a high quality FPV camera that can function also for action filming.
1. Can you use a third party video receiver with the O3? like a Moneagle monitor?
2. Are there any video systems that are encrypted / secured end to end? I don't like the idea of anyone tuning in to my vtx and spying on me.
Thank you
You can only use the DJI Goggles 2 and DJI FPV Goggles V2 with the O3. Nothing else. The O3 air unit is not encrypted as far as I know (maybe it is I'm not sure) but the O3 system doesn't have "audience mode" where anybody can tune in. You have to manually enable the option to broadcast your signal to viewers.
@@JoshuaBardwell Thank you for your quick response. Well that nips the O3 in the butt for me. FPV world is a bit confusing. Thanks for you videos. They're helping. Can you please help point me in the right direction.
I'm looking for a digital FPV camera VTX system that is high end (4K) and has a 2 or 3 axis R/C tilting gimbal. Similar to Mini 2's camera, but better, and can fit in a 4" quad LR cruiser.
Have you seen anyone hack the video feed out of an action camera to VTX as a FPV feed, while the camera records 4K video to a microSD?
Is video transmission secure? Can anyone tune into your drone's broadcast channel? I'm looking for vtx privacy.
Thanks again. You rock dude
Very helpful in-depth info, the O3 is very interesting indeed! Been a while since I was serious about my fpv setup but this one's making me so curious.
MadsTech said that the FCC hack doesnt work on the latest beta firmware... and that the channels you can see are not related to the transmit power... this is VERY confusing. perhaps you can dig more into this.
WTFOS fixed the binding bug on vista side. On o3 still need to rebind
Enjoying remote id apparently
DJI's Fly app doesn't work without their controller. If you are using your own controller you are SOL for a live feed. Correct me if I'm wrong, but I can't get it to even acknowledge the goggles 2 and 03 Air unit.
I'm sorry but that's wrong. I have had it work lots of times but I don't use the controller at all.
Nice work of the corrections man 💪 Lots of good additional info in there too. Going to be a useful video to refer to when mine arrives. Cheers 🙏
What has better range: O3 Air Unit + Goggles V2 with aftermarket antennas, FCC and 1200mw hack or O3 Air Unit + Goggles 2 with stock antennas?
How cool is it to know that you're one of the world's most helpful people for those in the FPV hobby?
Ever thought about doing a proper review on walksnail now it’s on good firmware and pretty much half the price and weight.
I wish you would have tried a c to c cable on the v2 goggles to use digiview.
I think I did, didn't I? The V2 goggles work with Digiview.
I get a feeling they are not going to fix the lost bind bug - because, if they port the vista and air unit connection to the V2 goggle firmware, they likely ration that you should not need to boot into the older DIY side OS anymore. 🤷♂️
Interesting take
Great update video this system keeps surprising me.
Hello.Is the lens of the camera replaceable?
Thats Joshua Bardwell right there, and i learned something today
Wonder why there is gps coordinates that are all 0’s at 19:17 when you show the set file from the o3 air unit.. so they planned something to give it the gps info in the future.
Small fact about the antenna's: they are keyed.
6:34 that "something" is actually nothing. It's just the way old AU/Vista pairing works. Only the goggle ID is used. A little different than newer gens where pairing is two-way.
It's a stupid bug that should be fixed.
Not all the camera settings you would expect...no way to flip the camera 180 if you install it upside down
Great video Joxhua!
I have noticed that the DJI FPV Remote Controller 2 will work with the DJI O3 Air Unit however the Expo/Gain and Button options are not selectable. This makes it very difficult if not impossible to fly with the DJI FPV Remote Controller 2 and I am forced to install my Crossfire system.
Well now I feel stupid. Ignore my post I haven't used Betaflight for a while.
21:30 The 4:3 footage got mislabeled as 4K60 here. But it is marked 2.7K60 on the phone card, and you do point out afterwards 4:3 can't do 4K.
Good catch.
For Dji o3 unit googles 2 is better option for you Joshua?
My goggle2 hAve active a fan for fog. I remember the first white dog goggles dji had. I am one of the persons that couldn’t use it. Cause I sweat a lot in my face. This is a none existing problem in the goggles 2. (Not the small ones to the Avata) but the bigger that was with the dji fpv
Drone 😊
The bigger ones are not goggles 2 they are v2 goggles. I'm talking about the smaller goggles 2 that came with Avata.
O3 died just after 3rd short flight. Light (GREEN/RED) turns on and quickly turns off. It was working fine (activate/update/bind/link).O3/Goggles V2/RC2 link went off and LED light on O3 unit turned off. Now when powered on via FC (GEPRC F722 40A AIO, 6S battery) - LED on O3 comes on for a split of a sec, goes off and then nothing.
My drone got crashed because O3 got off while in the mid of the flight, i lost goggles video feed. Then if i remove the battery and plug it back in the green light comes and goes in a second.
Connecting O3 directly to the computer via USB cable (same computer, same USB port/cable that used to work before):
1. O3 LED turns GREEN for 2 - 3 sec
2. While the LED is on, Windows Device Manager shows "Unknown device"
3. O3 LED turns off
4. Unknown device disappears from device manager
5. DJI Assistant 2 does not see O3 anymore
6. O3 internal storage does not show up in Windows file explorer
7. O3 get a little bit warm (not hot) if I keep it connected to USB cable
This exact same problem someone else had and posted on DJI forum. and now i m having the same issue. Who else do have? any fixes?
Yall finally got me , just ordered the DJI Goggles 2 😂
The rebind problem to me is like DJI just trying to annoy the V2 users, force them to switch to goggle2, it really doesn’t like a bug
The 2 systems share the same memory space, and it overwrites each time you change. They're likely to fix it this update
Hello! does it have a built-in microphone? transmits the audio to the glasses? Or just record it. Thank you and very good your video!
No, it doesn't do either.
What the heck is that on your V2 lenses 04:05 Also cool strap, what is it? 04:20
Josh Prince of FPV could you do a DJI round up? I have a set of goggles v2 and I dip in and out of the dji news is there still firmware updates that people shouldn't do like in the past or is it all safe now??
Now that Butter can roll back firmware, it seems like there's no risk of locking yourself out of Root.
That is the srt file for the air unit. What about the file for goggle's recording? Perhaps the goggle's recording has the latency and the other records on a separate srt file?
That's what I'm telling you. There isn't one on the goggles. Except if you are using V2 goggles then it's there as usual. But on Goggles 2, it's not there.
@@JoshuaBardwell ah ok thanks for the clarification 👍
I appreciate you bardwell cause you can man up and be honest. So when I say this it doesn't apply to strictly bardwell. All these people doing reviews are in such a hurry do drop there video for views and product link in description. I get it this is how you make your money. But ooofff I feel horrible for the people who rushed right away on stuff and then had issues. Like the avata drone. Glad I have patience but then again I'm always behind catching up. May not be such a bad thing. Again props to this man for making another video but to late for alot if there's things now that's a deal breaker
Hi great video BTW, I have a crazy question, is it possible to use this camera as an action camera only, without video transmission. and powered from the USB C port, I like the size of this unit and it would be great to mount the camera on a helmet and stick the main unit on the side of the helmet and power through a USB connection, and the price is great, so is it possible to opperate this without goggles. In other words power up and start recording from your phone ??. Also would the on screen data be recorded or can it be turned off on the internal video recording.
Thank you in advance.
That’s a bit much bro.
The camera does not power up from USBC.
Great video, thanks for this. One question, at time 20:20 the explanation of the FOV does not line up with what you are showing. maybe I am mistaken, but I'd be grateful for some clarification here. What I am noticing is the FOV changes when you arm if using > 60fps. For example, if I am in 4:3, 2.7k, 120fps, when I arm, the image FOV goes down (zooms in). If I select 100fps it zooms less, and at 60fps there is no zoom, the image looks same as when not armed. The same is true if using 1080, 120fps crops most, 100fps less, then 60fps does not crop at all. Again, this only happens at the moment you arm. after you disarm, 10sec later of so and it goes back to wider FOV. Has anyone else noted this. I am running o3 firmware 01/02.00.00 (latest as of MAR 10. 2023) , on V2 googles (firmware 01.06.00.00).
People are suspicous of DJI for a reason I was forced to update my mini 2 around october 2022 and my altitude was limited to 500 meters. no limits exsisted beforehand.
There are too many comments to check, but if you can get video to your phone, can you cast your phone to a TV? I have a 55 inch TCL Roku TV that I can cast Apple devices like iPhone and iPad to it. So essentially I can cast the goggle view if it's appearing on my iPhone, correct?
Any idea on what the max range is?
After putting the code in cli in betaflight, to use the osd the quad did not recognise my crossfire receiver no matter what uart it was on, I figured I'll try my crossfire on sbus then it recognised the receiver, so having to use crossfire on sbus.
and Joshua (too) did learn something today ;)
Great video. The power difference between FCC and CE affects both Controller and goggles or only one of them? Which one? I’m about to buy a cinebot30 O3 in ELRS version. Tks, brother!
You can definitely use gyroflow with the hero 6. I do it all the time and gyroflow works much better than reelsteady.
Yeah same with me. Hero 7 no problem with gyroflow
Regarding the video out for the o3 unit is this only for android as I’ve tried and tried on iPhone and just get device not supported on the v2 Googles🤔
Same here 🤦♂️
That's what I'm hearing. Only android is working at this time.
Can confirm video out works on iphone now from my testing
@@420ICUP hey, how did you end up getting it to work on iphone? thanks
again, so great review, but i'm still a bit confused if the goggles 2 are supporting the DJI Air Unit and vista? in some quite recent other review, it is claimed it is not supported, even on DJI website if i'm not wrong.
It is not currently supported but it will be supported soon, expected by the end of December.
the FCC hack does not work on the DJI Goggles 2 with consumer firmware - mads tech taked about it in his new video unfortunately .. deal breaker for me in the EU!
V2s do have the power to record OSD. If WTFOS can do it dji can do it easily
looks like u forgot to drop an amazon link for the device that connects to phone to give HDMI output.
amzn.to/3EcsyAr
Hey Mike does it still work? I have an RC PRO but it won't connect to my goggles 2 like your video.. Any tips to get this working?
When this first came out I guess I assumed that they were a standalone video transmission system that could be used on any fpv platform. Be it a drone or an airplane or even a radio controlled car. I would imagine that it can be done but could this be used with just the goggles for video transmission while using say another company's radio and receiver on a car?
Yes you can use another controller and receiver. But if the O3 is not connected to a flight controller it won't go to full power and performance will be poor.
really enjoy these much more in-depth videos. It shows just how much DJI dropped the ball on so many aspects.
I'm still rocking the V1's, I have plenty of vistas and replacement cameras and seeing how DJI is being waaaaay too Apple, I won't be buying anymore DJI products for some time.
Can you provide some example of this? What’s did they drop the ball on
Always the best🔥
Did you update your V2 FPV goggles with DJI's firmware? Are you no longer using the wtf fpv hack?
"FPVknowitall... I don't actually know it all, it's just a brand" -- actual Joshua Bardwell quote
Hi, my airunit O3 is very hot, I can't figure out how powerful it works. I have the FCC hack installed. The power meter showed ~4w in lower state mode and ~12w without it. Can I see the transmission performance in some software?
I didn't observe dynamic power changes. The power consumption doesn't differ when in close proximity, even when the signal has almost disappeared. I don't like this approach because why should my airunit O3 operate at maximum power when it's only 5 meters away from me?!