Thank you for enjoying the video! I am stoked that you found it useful, we are always here to help. Did the video help you get your own backup camera install up and running?
@@crutchfield It certainly clears up a lot of doubt that I had a few hours ago. I'm waiting for my new BOSS BE920WCPA to come in (ordered at Crutchfield of course !) and will start to hook it up pretty soon. I intend to had both AFT and front cam so your video is just what I was hoping to find as a source of information. Thanks for sharing this.
This is the most helpful video for wiring up a backup camera! I’ve watched dozens and this really simplifies it and makes it easy to apply to a specific vehicle.
Really a well Handle the video with all steps on how to do it by yourself thanks for your kind help us to solve this particular item and this is my question do you have a great resolution camera
A improperly called solar generator is all im using. Runs the cameras for weeks. Its lithium iron phosphate so not going to fireball like lithium ion. Bypasses parking mode that doesnt catch everything cause theyre on all the time. Just have to monitor the sd cards sooner. I have a 2 channel Thinkware f200 pro set front and back and 2 Garmin mini 2s on the sides. I dont have to worry about a dead battery on the vehicle. Just charging the generator every other month.
I watched so many videos about hooking up the electronics for the reverse camera, and they were all pretty terrible. This one was easily the best. I was starting to lose hope on getting this done in time for a trip I was going on. I am not the most skilled electrician, and this video helped me make it all make sense in a very easy to understand way. Thank you so much!
This is literally THE BEST video for backup camera installation. Most videos don't go nearly into the detail of the head unit connection. Why? Because they aren't good videos. You guys do an amazing job! Now, if I could only find where the trigger wire for my 2014 Camry Hybrid is located. Any tips would be greatly appreciated!
I just spent 2 hours looking for a 12v ignition source in my engine bay for a bumper cam. After hearing your explanation I realized I can just power it at the other end of the wire at the headunit. Crutchfield is unmatched when it comes to aftermarket car electrics, thank you!
Just like many others said, this is the BEST video for reverse camera wiring. There are so many videos out there that do not explain properly, but your video is super helpful. Thank you so much for the informative content!
Just FYI for people doing this the first time. If you use the reverse wire ground rather than a chassis ground you will probably get lines or snow on your monitor. I've done it, then did it correctly after seeing the degraded picture. Exception to the running the wire to reverse. If you have a canbus system, like in a Jeep, the canbus box knows when you are in reverse and tells the stereo to shift to camera even if you don't have a camera installed or any 'trigger wire'. Makes them easy to install if you have an adapter box. You need one for your steering wheel controls anyway.
Thank you, going to try this and see if my image quality improves. Although in my case i'm getting a decent picture but strange colours. Anything green (such as trees/grass) is appearing reddish/purple
OMG!! Hours and hours looking for a video that would explain why my rear view camera wasn't working. Finally this video made my camera work!! Phew! Sir, you're a life saver! I was about to give up and return my system back to Amazon thinking maybe the unit was defective. I installed it precisely that way the instructions said and camera did not want to work. The instructions never mentioned anything about the "convenience wire". That was my issue. Since it makes no mention of it, and in other TH-cam videos for that matter, I didn't bother with it. This video made everything make sense. Thank you so much!
I am happy you found our video helpful for your situation. We provide lifetime Technical Support for all products purchased, as well as Mastersheet vehicle-specific instructions when available for your specific vehicle. This is a huge reason to shop with us instead of big-box retailers that are not specialists in the gear they sell.
purchased my gear from CF. Installed everything else except for the reverse camera. Rainy weather an garage availability was making me lazy. Had this great video pop up in my YT Feed. Will be procrastinating less to hook up the reverse now. Thanks.
I absolutely love Crutchfield, because they give every explanation of how to hookup aftermarket parts to every car system I've used so far. I've been using and learning from them for over 10 years, and not been disappointed yet.
@@crutchfield I had a SEICAN 9" double din computer unit on my CHARGER RT 07 and just bought a rear cam. I couldnt figure out why I didnt get a video feed until I watched your vid. I completed the install today and got those 3 red wired hooked up properly (I had forgotten to power the cam). Thanks to your video !
That is heartwarming to hear. I am stoked that our video got you sorted, exactly what we love! Thank you for your kind words and I hope that you continue to enjoy our content. Now that you are up and running, how do you like the radio and camera upgrade?
Seriously!!! I bought this used car a few days ago. the last owner put in a Jenson CAR910x and it was a mess... I was sure that I had fixed everything, but the cam would not work. read a bunch of wire diagrams and watched a bunch of videos. But yours somehow cut thru the confusion and I now have a back-up camera!! Thanks
Just bought a head unit and backup camera from crutchfield for my 2006 4runner. Their customer support team and these videos have been incredibly helpful! Beyond impressed with these guys!
Another terrific guide from Crutchfield! I've been dealing with them since the 80s. There is no better source for car technology knowledge or deals than Crutchfield.
Perfect video. This is a real person talking about what his headline states. Some of these videos morons want to talk about their vehicle in which they are installing a camera in. And no stupid music. Great job. Oh, and you spoke clearly.
@@crutchfield can I ask you something? Your way worked exactly. My digital screen goes into black mode but it says "no signal". When I put it into drive it goes right back to the radio as it should. Why would it say "no signal"? I relocated the ground wire just in case it was that but still nothing.
Sounds like you may want to double check your video connections and camera settings on the radio as well. If you got the camera and/or radio here, you can call our Tech Support, Their direct number is on your invoice.
Thank you so much! I am usually knowledgeable about this kinda stuff, but out of the 2 options offered by my camera manufacturer, but i was really confused. You set everything straight.
Plenty of tutorials say tap to the reverse light. But that's not the only solution!!! Appreciate this video explained many ways to wire. Very knowledgeable!
Omg thank you so much for this explanation! I was so frustrated with the limited instructions for my back up cam and couldn't figure out why the head unit wasn't switching to my camera when putting the car in reverse. Seems like it's gonna be about a thirty minute fix to attach those convenience wires. Forever grateful.
This was a great video. Your the only one who explained how I can have my reverse camera work with a trigger for reverse and constantly running at the same time. This is fantastic for a split android screen and if I wanted it hooked up two way's so I can record the back of my car 24/7 while driving then still switch to rear camera for reversing when triggered.
I'm new to the backup camera thing I just bought a boss 7" floating screen and I've watched a dozen videos and this is by far the most incredible walk through ever this video alone needs one million likes hands down
@@crutchfield your welcome havnt put the camera up yet been sick but once over it i will be watching this video again for sure thanks and keep up the good content
Well, I am surprised that more folks are not talking about the wireless transmitters ... one of which I just installed in my car and I saved me all the disassembly of the interior body panels and wiring that darn wire through the length of the car !!!
Late to the party, but I can strongly recommend not to use the convenience wire as a power supply feed. They are typically too long too thin therefore too high resistance for passing enough current for some cameras.
Outta the 10 videos ive just watched- this hands down is the most dumbed down explanation to help out anyone in wiring up that reverse camera. I praise you for your lesson oh mighty one 😆😅🙏🙏
This just saved me so much time and stress. The instructions I got with my stereo told me to connect the reverse trigger wire to a wire behind my dash which would take a lot of effort. It's nice knowing I can just tie it in with the reverse light used to power the camera.
Super clear and concise and helped me complete an installation that has saved multiple parking frustations! I wish all videos were done this well. Thank you.
Thank you Chris, like Devin said a year ago, this video is the best on TH-cam if not the best anywhere Also CRUTCHFIELD is fabulous for electronics for your home or automobile Good Luck!!
Getting mine installed was a PITA, camera manual had no hints on what to use that little trigger wire for, and the head unit manual said it would automatically switch to the camera when 'hooked up to backup lamp circuitry.' I know my electrics, so I THOUGHT I understand what they meant. After watching countless videos already, I decide to check with the guys I bought the system from. Lo and behold, I now have it wired correctly! Now to get that stubborn plate screw out...
Chris, very well done and informative... Look forward to more videos from you! VERY glad you went through the different variations so people could see why others may have done or said what they did. You DA MAN!!!!
Man! this is the most comprehensive video I've ever seen and luckily the first video I clicked on! What a wealth of Information! Thank you for this great and incredibly informative video I learned so much from this! Most definitely subscribing to this channel!
I am happy that you found our video useful! Thank you for the kind words. We try hard to take the guess work out of performing your own installs, we are do-it-yourselfers too!
Thanks for explaining the convenience wire and the reverse trigger wire. The trigger wire was labeled "rear camera power" on my Boss radio and that slowed me down a lot. Need to mention to turn the camera function on in radio's "Camera Settings" menu.
Tomorrow's project, rewire my reversing camera that I only just installed myself, last week. I've been looking for how to view it at any time and not just when in reverse. Cheers for the extremely helpful video 👍🏼
This is really quite clear and comprehensive video with clarity. May be , the narration could be added with circuit diagrams . How to go for 2 cameras on oncord plus ?
Thanks Crutchfeild, This makes it so much easier to understand what all the wires are and for and all the different ways to get set up. 2 Thumbs up from me Down under "
THANK YOU!! I was going nuts wondering what that little wire is for and where it goes, and why the heck it only works in reverse lmao. Now I know what to do to fix this. Thanks again! By the way, you need to do the second setup to be able to see the camera while adjusting parking lines... If you have it for reverse only setup, you'll have to be in reverse to adjust them in setup
This might be the only video (or any instruction) that noted the black wire from the camera’s power cable doesn’t need to be tapped. I always wondered if it could be chassis grounded, but everything else I’ve read/seen states to tap into the black wire on the reverse lamp. This should make it a lot less confusing on my next install.
Sorry, I'm more confused now than I was before. I'm just trying to hook up a backup camera to my Jensen CAR710X. I bought both from Crutchfield a couple of years ago, along with the wiring harness service. I'm just getting around to putting in the backup camera now. The radio installed just fine and works ok; it even looks for a backup camera when I put my Tahoe in reverse. However, the trouble is the camera wiring. I know about tapping into the backup lights, but this Tahoe doesn't have a convenient way to hide the power wire so I'm looking for a way to do it without using the backup light to power the camera. My 18-pin connector has the Camera in wire (yellow female RCA) which has that red convenience wire you mention. Can I just hook up the super-long camera RCA line (that has a convenience wire at both ends) to the one up at the head unit? Do I also need to use that reversing wire if the head unit is already looking for the camera when I put the car in reverse? Thanks. I hate wiring stuff so I was thinking with the harness service it would just be plug-n-play, and it isn't.
Sorry to hear your installation isn't going easier. Our Tech Support can help you get things wired and working. Please give them a call at your convenience. Their direct number is on your invoice. They are available: Monday-Friday: 9 am - 8 pm est Saturday-Sunday: 10 am - 7 pm est Thanks!
I’ve ordered everything needed for my dodge caravan 2016 from your site it’s nice to see a company with tutorials and telling me we can help you thank you for a great video
It is never a good idea to attempt to cut and splice RCA video signal wires. If you need to extend the length of the RCA video cable from your camera to your radio, you can use the T-Spec V10 RCA Video cable (available in 3-foot, 9-foot, and 20-foot lengths) in the first link below and the T-Spec RCA barrel connectors in the second link. www.crutchfield.com/I-rYALc166/p_120V10R9V/T-Spec-v10-Series-Video-Cable-9-foot.html www.crutchfield.com/I-rYALc166/p_120RCABFN/T-Spec-RCA-Barrel-Connectors.html
Thank you for the info bud, you explained everything about the subject. However the way I run mine as it's a camper with a tow hitch is multiple power connections, one on the reverse lights, one from the dash switch and one by a switch next to my bed, mine displays on my Android phone and tab as I use my Galaxy Tablet for everything including my Head unit. I leave all switches off that way it is just a reverse camera, if I'm towing I use the dash switch and if I am in remote locations at night my security sensor lights and my surround cameras come on, the horn pips to wake me up and my tablet shows everything going on around my van. A bit of an overkill for the norm but living on the road is a long way from normal. Thank.
dude..I could not figure out what the hell I was doing wrong. I searched through aftermarket forms for my made in China pos radio, Watched other vids, I tried everything. I had given up on it. Then I watched halfway through this guy's video and figured it out. Thank you
This answered my questions exactly!!! Thank you so much. I had just finished wiring my radio and harness together and of course I only had my purple wire (Reverse +) left. My radio has a second harness (for Audio/Video input for camera and Media player) and I was trying to figure out if I'd be hooking into the reverse circuit, or powering from the head unit (since there was another power and ground line on the second harness). Now I know the differences. Thank you again.
@@crutchfield Yes I have a Boss radio that came with a backup camera. I haven't installed it yet but the radio comes with a power wire specifically for the camera, so my plan is to use that
Would it be possible to connect the red camera wire to the purple wire and then splice the red camera wire together with the accessory wire or would that be dangerous?
@@crutchfield I have a 2012 Audi A3 8P.I asked about the canbus option since my car has this and you didnt refer to this system and I was wandering if you sell a compatible device and how the installation differs from a regular system.Cheers👍
Hi, it is a great video explaining what and how to do it! I just want to know how to do it if you use a canbus in the middle, hope you can help me! Thanks
Excellent! :-) I've bought a cheap camera for my 2-DIN Pioneer, as I don't need some 4K or HD resolution. Or not something even close to it. ;-) But the camera came without any good installation guide. Your video has to be best to explain different scenarios. As well it is not locked to a special brand. So thx again! Greetings from Norway! :-)
I really appreciate this video and the simplicity of it. I installed my unit using the method of powering from the reverse light. However, after working for a few weeks, whenever I put the car in reverse it blows a fuse and dash lights switch off (and car won't start). I'm not sure if I need to change the power source of the rear camera or it was too much for too long on the fuse (7.5a that keeps blowing). Any help would be appreciated!
We provide lifetime Technical Support with any order, if you purchased your gear from Crutchfield do not hesitate to call us with your order number handy and we would be happy to help you troubleshoot.
Question! Can I connect red wires from 2 camera video cables to hot stereo input wire? Thank You for the clear instructions! You can also run a wire for the back up camera all the way back to the reverse tail light wire along with the video cable!
Will it work if you just connect the convenience wire to the trigger wire on the head unit, and the other end convenience wire to the camera red/power (grounding the black) without taping into the reverse light? Another way of asking is will the head unit provide the power for the camera
The trigger wire on the head unit is an input. It doesn't provide power output so no you can't do what you are asking. However most Android head units and some others have both a reverse trigger input to tell the head unit your car is in reverse and also has a camera power output which will send power to the backup camera to turn it on.
Very good video. The only thing i couldn't resolve yet is... I connected the red wire to power of camera to the trigger wire but it didn't work because actually the head unit has a specific wire for 12v camera. I will connect that one, but i don't know where i can connect the trigger wire. Could i connect together as a three connects? Thank you 😊
I'm sorry to sound like a crutchfield fan boy but DAMN NICE VIDEO. Answered some questions very well that the thousands of other videos skated around on. Kinda tapped the issue than got distracted by a shiny light and abandoned it abruptly. Thank you
Literal only person on TH-cam who can explain anything to do with backup cameras clearly for beginners. Thank you
Thank you for enjoying the video! I am stoked that you found it useful, we are always here to help. Did the video help you get your own backup camera install up and running?
@@crutchfield It certainly clears up a lot of doubt that I had a few hours ago. I'm waiting for my new BOSS BE920WCPA to come in (ordered at Crutchfield of course !) and will start to hook it up pretty soon. I intend to had both AFT and front cam so your video is just what I was hoping to find as a source of information. Thanks for sharing this.
Excellent! Thanks for shopping with us! 😃 If you run into any issues with the installation, just let us know!
Yeah
Good. I am at the right place! 😃
The clearest connection video yet. This guy is an unsung hero!
Chris is an absolute BALLER in my mind. We are so happy that you enjoyed the video and found the information useful. 🥰
this actually is the only video on youtube that explains the stupid red wire coming out of the video cable. thank you so much
You're welcome. It's great to hear that you found it helpful! 🙂
ikr. I just need to know what the red wire do before I hooked up.
I guarantee no one else explained wiring this well as this young man,
Thank you for the kind words, we appreciate it!
Young 😂😂😂😂
This is the most helpful video for wiring up a backup camera! I’ve watched dozens and this really simplifies it and makes it easy to apply to a specific vehicle.
Thanks, Devin. Glad we could help. If you need anything further, please us know.
Real talk you are a goat for this video . The help is so useful
Really a well Handle the video with all steps on how to do it by yourself thanks for your kind help us to solve this particular item and this is my question do you have a great resolution camera
Thank you! I indeed wanted to comment the same!
A improperly called solar generator is all im using. Runs the cameras for weeks. Its lithium iron phosphate so not going to fireball like lithium ion. Bypasses parking mode that doesnt catch everything cause theyre on all the time. Just have to monitor the sd cards sooner. I have a 2 channel Thinkware f200 pro set front and back and 2 Garmin mini 2s on the sides. I dont have to worry about a dead battery on the vehicle. Just charging the generator every other month.
I watched so many videos about hooking up the electronics for the reverse camera, and they were all pretty terrible. This one was easily the best. I was starting to lose hope on getting this done in time for a trip I was going on. I am not the most skilled electrician, and this video helped me make it all make sense in a very easy to understand way. Thank you so much!
Glad we could help!!!
This is literally THE BEST video for backup camera installation. Most videos don't go nearly into the detail of the head unit connection. Why? Because they aren't good videos. You guys do an amazing job! Now, if I could only find where the trigger wire for my 2014 Camry Hybrid is located. Any tips would be greatly appreciated!
I just spent 2 hours looking for a 12v ignition source in my engine bay for a bumper cam. After hearing your explanation I realized I can just power it at the other end of the wire at the headunit. Crutchfield is unmatched when it comes to aftermarket car electrics, thank you!
We are glad this helped!! What vehicle did you install this gear into?
Just like many others said, this is the BEST video for reverse camera wiring. There are so many videos out there that do not explain properly, but your video is super helpful. Thank you so much for the informative content!
You're welcome, KJ! Hope your installation goes well.
Just FYI for people doing this the first time. If you use the reverse wire ground rather than a chassis ground you will probably get lines or snow on your monitor. I've done it, then did it correctly after seeing the degraded picture.
Exception to the running the wire to reverse. If you have a canbus system, like in a Jeep, the canbus box knows when you are in reverse and tells the stereo to shift to camera even if you don't have a camera installed or any 'trigger wire'. Makes them easy to install if you have an adapter box. You need one for your steering wheel controls anyway.
Curious what model years the Canbus system started?
Thank you, going to try this and see if my image quality improves. Although in my case i'm getting a decent picture but strange colours. Anything green (such as trees/grass) is appearing reddish/purple
Finally, a thorough explanation of wiring it 2 different ways.
OMG!! Hours and hours looking for a video that would explain why my rear view camera wasn't working. Finally this video made my camera work!! Phew! Sir, you're a life saver! I was about to give up and return my system back to Amazon thinking maybe the unit was defective. I installed it precisely that way the instructions said and camera did not want to work. The instructions never mentioned anything about the "convenience wire". That was my issue. Since it makes no mention of it, and in other TH-cam videos for that matter, I didn't bother with it. This video made everything make sense. Thank you so much!
I am happy you found our video helpful for your situation. We provide lifetime Technical Support for all products purchased, as well as Mastersheet vehicle-specific instructions when available for your specific vehicle. This is a huge reason to shop with us instead of big-box retailers that are not specialists in the gear they sell.
purchased my gear from CF.
Installed everything else except for the reverse camera.
Rainy weather an garage availability was making me lazy.
Had this great video pop up in my YT Feed.
Will be procrastinating less to hook up the reverse now.
Thanks.
You're welcome! Keep us posted.
Still never got it done….what a lazy POS you are
I absolutely love Crutchfield, because they give every explanation of how to hookup aftermarket parts to every car system I've used so far. I've been using and learning from them for over 10 years, and not been disappointed yet.
💙 thanks for shopping with us! What's your favorite car system or component you've installed over these 10+ years?
This is GOLD ! Straight to the point, no commercials....and clear explanations. Right on !
Glad you found it helpful. Are you planning an installation?
@@crutchfield I had a SEICAN 9" double din computer unit on my CHARGER RT 07 and just bought a rear cam. I couldnt figure out why I didnt get a video feed until I watched your vid. I completed the install today and got those 3 red wired hooked up properly (I had forgotten to power the cam). Thanks to your video !
That is heartwarming to hear. I am stoked that our video got you sorted, exactly what we love! Thank you for your kind words and I hope that you continue to enjoy our content. Now that you are up and running, how do you like the radio and camera upgrade?
Seriously!!! I bought this used car a few days ago. the last owner put in a Jenson CAR910x and it was a mess... I was sure that I had fixed everything, but the cam would not work. read a bunch of wire diagrams and watched a bunch of videos. But yours somehow cut thru the confusion and I now have a back-up camera!! Thanks
That is amazing to hear, thank you for letting us know!
Just bought a head unit and backup camera from crutchfield for my 2006 4runner. Their customer support team and these videos have been incredibly helpful! Beyond impressed with these guys!
Thanks for the kind words! We hope that you enjoy the new setup!
Another terrific guide from Crutchfield! I've been dealing with them since the 80s. There is no better source for car technology knowledge or deals than Crutchfield.
Thanks for the kind words and for shopping with us for so many years! 😃
Perfect video.
This is a real person talking about what his headline states.
Some of these videos morons want to talk about their vehicle in which they are installing a camera in.
And no stupid music.
Great job.
Oh, and you spoke clearly.
Thanks! It's great to hear that you found it informative. 😃
@@crutchfield can I ask you something?
Your way worked exactly. My digital screen goes into black mode but it says "no signal".
When I put it into drive it goes right back to the radio as it should.
Why would it say "no signal"? I relocated the ground wire just in case it was that but still nothing.
Sounds like you may want to double check your video connections and camera settings on the radio as well. If you got the camera and/or radio here, you can call our Tech Support, Their direct number is on your invoice.
Thank you so much! I am usually knowledgeable about this kinda stuff, but out of the 2 options offered by my camera manufacturer, but i was really confused. You set everything straight.
You're welcome! It's great to hear that you found it helpful! 🙂
I’m so glad to see Crutchfield still afloat. I used to get the magazines when I was an installer back in the late 90’s.
We're still going strong! 🙂
Plenty of tutorials say tap to the reverse light. But that's not the only solution!!! Appreciate this video explained many ways to wire. Very knowledgeable!
Glad we could help!
Absolutely the best explanation installing these rear cameras! Can’t get any easier and comprehensive than this!
Thanks! Hope your installation goes well.
Omg thank you so much for this explanation! I was so frustrated with the limited instructions for my back up cam and couldn't figure out why the head unit wasn't switching to my camera when putting the car in reverse. Seems like it's gonna be about a thirty minute fix to attach those convenience wires. Forever grateful.
Thank you for watching the video, and I am happy that it was able to provide you with a fix for your install. Keep us posted on how it works out!😍🤞
@@crutchfield Turned out exactly like it should! Backup cam comes on instantly when put in reverse now 👍
Thank you...Finally someone who shows what that little red wire is good for!
You're welcome! Glad our video could help :)
This was a great video. Your the only one who explained how I can have my reverse camera work with a trigger for reverse and constantly running at the same time. This is fantastic for a split android screen and if I wanted it hooked up two way's so I can record the back of my car 24/7 while driving then still switch to rear camera for reversing when triggered.
We are glad it helped!!
Thank you for this! It really helps to see the components laid out like that to understand how they work together. Great job explaining.
You're welcome! If you need anything further, please let us know.
I'm new to the backup camera thing I just bought a boss 7" floating screen and I've watched a dozen videos and this is by far the most incredible walk through ever this video alone needs one million likes hands down
Thanks for the kind words! We're glad to hear that you found it informative. 🙂
@@crutchfield your welcome havnt put the camera up yet been sick but once over it i will be watching this video again for sure thanks and keep up the good content
Well, I am surprised that more folks are not talking about the wireless transmitters ... one of which I just installed in my car and I saved me all the disassembly of the interior body panels and wiring that darn wire through the length of the car !!!
This was 8 minutes well spent. Crutchfield always doing it right, thank you for making this so simple to understand!
Late to the party, but I can strongly recommend not to use the convenience wire as a power supply feed. They are typically too long too thin therefore too high resistance for passing enough current for some cameras.
What's the alternative then?
Run some twin 3mm alongside it.
@wozzatherockdog1778 thanks!
wow finally someone who can thoroughly explain this simple wiring , was lost and this made it simple thank god.
It's great to hear that you found it helpful!
Outta the 10 videos ive just watched- this hands down is the most dumbed down explanation to help out anyone in wiring up that reverse camera.
I praise you for your lesson oh mighty one 😆😅🙏🙏
This just saved me so much time and stress. The instructions I got with my stereo told me to connect the reverse trigger wire to a wire behind my dash which would take a lot of effort. It's nice knowing I can just tie it in with the reverse light used to power the camera.
It's great to hear that you found the video helpful! 🙂
Thank You! I am adding a backup to my wife's car, and this was exactly what I needed. I should have known to look here first. You guys are the pros.
You're certainly welcome! It's great to hear that you found the video helpful! 🙂
Super clear and concise and helped me complete an installation that has saved multiple parking frustations! I wish all videos were done this well. Thank you.
You're welcome! We are glad it helped
Very resourceful. Been watch videos for weeks, and this is the best one so far. Especially for those who are new to wiring.
Thanks, Joma. Hope your installation goes well.
Thank you Chris, like Devin said a year ago, this video is the best on TH-cam if not the best anywhere Also CRUTCHFIELD is fabulous for electronics for your home or automobile Good Luck!!
Thank you, Ron!
Getting mine installed was a PITA, camera manual had no hints on what to use that little trigger wire for, and the head unit manual said it would automatically switch to the camera when 'hooked up to backup lamp circuitry.'
I know my electrics, so I THOUGHT I understand what they meant.
After watching countless videos already, I decide to check with the guys I bought the system from. Lo and behold, I now have it wired correctly!
Now to get that stubborn plate screw out...
Way to go!
Best made video on backup camera install. Nothing is left out, exactly what I need. Thank you
Thanks, Anthony. Good luck with your installation!
want to add a backup camera to my wifes care, this is a very clear explanation , thank you
You're welcome, Walter. Hope your installation goes well.
Thanks for the educational video sir. Unlike other videos, yours also explained how each wire works. I almost bought a new rear cam 😂
You're welcome! It's great to hear that you found it informative! 🙂
Is it ok to tap into the cigarette, lighter ground I don’t really use the cigarette lighter ?
By far the best explanation of the issues to look for when wiring a back up camera. Thank you.
Thanks, Richard! Glad we could help. If you need anything further, please let us know.
Super clear, very thorough and easy to understand backup camera wiring video!
Thank you so much!👍
You're welcome. Hope your install goes well.
This is why I buy all my car electronics from Crutchfield. I once asked them to price match and they did. Instant sale!
Thanks for shopping with us! 🙂
Thank you for breaking this down so thoroughly. Very easy to get the basics of back camera wiring. Very much appreciated 👍
You're welcome, Joshua. Hope your installation goes well.
Great video, host does a perfect jobs explaining the whole circuit
Thank you! 🙂
This is the best backup cam wiring video on yt.
Thanks! How did your installation go?
Chris, very well done and informative... Look forward to more videos from you! VERY glad you went through the different variations so people could see why others may have done or said what they did. You DA MAN!!!!
Thanks for the kind words! It's great to hear that you found the video helpful. 🙂
Man! this is the most comprehensive video I've ever seen and luckily the first video I clicked on! What a wealth of Information! Thank you for this great and incredibly informative video I learned so much from this! Most definitely subscribing to this channel!
You're welcome and welcome to Crutchfield! Glad we could help.
Perfect work I looked all over the instructions and TH-cam you are the only one that nailed thank you
I am happy that you found our video useful! Thank you for the kind words. We try hard to take the guess work out of performing your own installs, we are do-it-yourselfers too!
Thanks for explaining the convenience wire and the reverse trigger wire. The trigger wire was labeled "rear camera power" on my Boss radio and that slowed me down a lot. Need to mention to turn the camera function on in radio's "Camera Settings" menu.
Tomorrow's project, rewire my reversing camera that I only just installed myself, last week. I've been looking for how to view it at any time and not just when in reverse. Cheers for the extremely helpful video 👍🏼
You're welcome! Good luck with your re-wiring.
@@crutchfield it worked a treat, cheers. Got my front camera hooked up too so I can better navigate those tricky 4WD lines 👌🏼
🎉, Great news! Way to go!
This is really quite clear and comprehensive video with clarity. May be , the narration could be added with circuit diagrams . How to go for 2 cameras on oncord plus ?
Thanks Crutchfeild, This makes it so much easier to understand what all the wires are and for and all the different ways to get set up. 2 Thumbs up from me Down under "
We are happy to know that this video helped!!
This is the only person which explains everything
He's great, I agree! I am delighted that you found his video helpful.
THANK YOU!! I was going nuts wondering what that little wire is for and where it goes, and why the heck it only works in reverse lmao. Now I know what to do to fix this. Thanks again!
By the way, you need to do the second setup to be able to see the camera while adjusting parking lines... If you have it for reverse only setup, you'll have to be in reverse to adjust them in setup
Glad we could help! Hope it's all good from here and you enjoy your setup.
Man answered all my curiosities on why it wasn’t working 😂 great video brother thanks for taking the time to make it.
You're certainly welcome! We're glad to hear that you found it helpful. 🙂
this is called professional youtuber !! thanks bunch
Awesome video. Haven't done this kind of work in ages and now there are so many more options than 4 speakers and power. LOL! So informative!
Welcome back! What type of setup are you planning?
This is extremely high-quality instruction, thank you.
Jesus thank you!
This is the best video on this PERIOD!
Cleared up my confusion
Thanks, J'Are! Glad we could help.
about to start this on my own car, this video helped IMMENSELY. Thanks!
We are glad it helped!! Hope the install was a success!!
the only place on the internet where i could find nice instructions
Glad we could help! 😊
Excellent explanation, grateful to have found your channel. Thank you for making our lives easier 😊
Welcome, R DONIS! Glad we could help. Hope your installation goes well.
This might be the only video (or any instruction) that noted the black wire from the camera’s power cable doesn’t need to be tapped. I always wondered if it could be chassis grounded, but everything else I’ve read/seen states to tap into the black wire on the reverse lamp. This should make it a lot less confusing on my next install.
That is awesome to hear! We are happy that you found the video helpful. 🥰
Man this is a great video. Made my hooking up my back up cam so much easier. Thank you
You're welcome! It's great to hear that you found it helpful! 🙂
I wanted to come back in here and give a second like to this. THANK you so much for this... It was a breeze after this guide.
That is awesome! So glad we could be of help! What vehicle did you do the install on?
Sorry, I'm more confused now than I was before. I'm just trying to hook up a backup camera to my Jensen CAR710X. I bought both from Crutchfield a couple of years ago, along with the wiring harness service. I'm just getting around to putting in the backup camera now.
The radio installed just fine and works ok; it even looks for a backup camera when I put my Tahoe in reverse. However, the trouble is the camera wiring. I know about tapping into the backup lights, but this Tahoe doesn't have a convenient way to hide the power wire so I'm looking for a way to do it without using the backup light to power the camera. My 18-pin connector has the Camera in wire (yellow female RCA) which has that red convenience wire you mention. Can I just hook up the super-long camera RCA line (that has a convenience wire at both ends) to the one up at the head unit? Do I also need to use that reversing wire if the head unit is already looking for the camera when I put the car in reverse?
Thanks. I hate wiring stuff so I was thinking with the harness service it would just be plug-n-play, and it isn't.
Sorry to hear your installation isn't going easier. Our Tech Support can help you get things wired and working. Please give them a call at your convenience. Their direct number is on your invoice. They are available:
Monday-Friday:
9 am - 8 pm est
Saturday-Sunday:
10 am - 7 pm est
Thanks!
This was wonderfully concise. Thank you for such a clear video
You're welcome! It's great to hear that you found it helpful. 🙂
I’ve ordered everything needed for my dodge caravan 2016 from your site it’s nice to see a company with tutorials and telling me we can help you thank you for a great video
Thank you, Sean! Hope you enjoy your new setup and will let us know whenever you need anything else.
thanks someone who actually told us something useful
You're welcome! It's great to hear that you found it helpful. 🙂
Great job man, after watching dozens of videos i wish i would have ran into this one sooner! Thank you so much!
You're welcome, Elvin. Hope your installation goes well.
My cam wire from the radio head is to short to make it to the license plate cam mount. Can I cut the wire and solder on extra wire to make it longer?
It is never a good idea to attempt to cut and splice RCA video signal wires. If you need to extend the length of the RCA video cable from your camera to your radio, you can use the T-Spec V10 RCA Video cable (available in 3-foot, 9-foot, and 20-foot lengths) in the first link below and the T-Spec RCA barrel connectors in the second link.
www.crutchfield.com/I-rYALc166/p_120V10R9V/T-Spec-v10-Series-Video-Cable-9-foot.html
www.crutchfield.com/I-rYALc166/p_120RCABFN/T-Spec-RCA-Barrel-Connectors.html
Thank you for the info bud, you explained everything about the subject.
However the way I run mine as it's a camper with a tow hitch is multiple power connections, one on the reverse lights, one from the dash switch and one by a switch next to my bed, mine displays on my Android phone and tab as I use my Galaxy Tablet for everything including my Head unit.
I leave all switches off that way it is just a reverse camera, if I'm towing I use the dash switch and if I am in remote locations at night my security sensor lights and my surround cameras come on, the horn pips to wake me up and my tablet shows everything going on around my van.
A bit of an overkill for the norm but living on the road is a long way from normal.
Thank.
Sounds like you have everything covered with that setup!
Great video as always. I wish we had Crutchfield here in the UK. I love your tech articles.
Thanks! It's great to hear that you found it helpful! 🙂
@@crutchfield I find you helpful, but we need you in the UK! 🇬🇧
Even if we can't ship you any gear internationally Rik, we can still hangout?😎
@crutchfield of course! Been binge watching all your videos to help with my basic install. Much love for what you do! 💛
💙
Thank you so much for this comprehensive video on wiring methods!!
You're welcome, Otis. Hope your installation goes well. If you need anything else, please let us know.
I never comment on videos. But this was so to the point and helpful. Thanks
You're welcome! It's great to hear that you found it helpful. 🙂
dude..I could not figure out what the hell I was doing wrong. I searched through aftermarket forms for my made in China pos radio, Watched other vids, I tried everything. I had given up on it. Then I watched halfway through this guy's video and figured it out. Thank you
Glad to hear you're all set! If you need anything further, please let us know.
This answered my questions exactly!!! Thank you so much. I had just finished wiring my radio and harness together and of course I only had my purple wire (Reverse +) left. My radio has a second harness (for Audio/Video input for camera and Media player) and I was trying to figure out if I'd be hooking into the reverse circuit, or powering from the head unit (since there was another power and ground line on the second harness). Now I know the differences. Thank you again.
You're welcome! We are glad to know that this video helped you get up and running
You gave me ideas i didnt know i could do, thank you crutchfield!
We are glad this helped!
This video is so helpful, thanks so much. My radio comes with power for the backup camera so now I know how I want this wired.
You're welcome, Freddie. Are you planning to use a specific backup camera?
@@crutchfield Yes I have a Boss radio that came with a backup camera. I haven't installed it yet but the radio comes with a power wire specifically for the camera, so my plan is to use that
Okay, cool. Hope your installation goes well and you enjoy your new radio/camera.
Would it be possible to connect the red camera wire to the purple wire and then splice the red camera wire together with the accessory wire or would that be dangerous?
We do not advise deviating from the install instructions with any camera install.
finally figured out why my backup camera wouldn't automatically trigger when put in reverse....I didn't connect that extra wire. Thanks!
You're certainly welcome. It's great to hear that you solved the problem! 🙂
Excellent video,much appreciated. My car has Can bus system,how does that differ? Apparently you dont connect to reverse wire!
Thanks, Fernando. The best wiring option will come down to the radio and camera you use. Do you have specific models in mind?
@@crutchfield I have a 2012 Audi A3 8P.I asked about the canbus option since my car has this and you didnt refer to this system and I was wandering if you sell a compatible device and how the installation differs from a regular system.Cheers👍
Are you hoping to add a camera to the factory radio or an aftermarket radio?
Hi, it is a great video explaining what and how to do it! I just want to know how to do it if you use a canbus in the middle, hope you can help me! Thanks
The best options will depend on the aftermarket radio and camera you're using. What brand and models do you plan to install?
Excellent! :-) I've bought a cheap camera for my 2-DIN Pioneer, as I don't need some 4K or HD resolution. Or not something even close to it. ;-) But the camera came without any good installation guide. Your video has to be best to explain different scenarios. As well it is not locked to a special brand. So thx again! Greetings from Norway! :-)
We are glad that it helped!!
Thank you guys, you saved me from calling your tech support line, the video answered all my questions! YAY Thank you !
YAY!! You're welcome!
I really appreciate this video and the simplicity of it. I installed my unit using the method of powering from the reverse light. However, after working for a few weeks, whenever I put the car in reverse it blows a fuse and dash lights switch off (and car won't start). I'm not sure if I need to change the power source of the rear camera or it was too much for too long on the fuse (7.5a that keeps blowing). Any help would be appreciated!
We provide lifetime Technical Support with any order, if you purchased your gear from Crutchfield do not hesitate to call us with your order number handy and we would be happy to help you troubleshoot.
Question! Can I connect red wires from 2 camera video cables to hot stereo input wire?
Thank You for the clear instructions! You can also run a wire for the back up camera all the way back to the reverse tail light wire along with the video cable!
You can connect the reverse trigger wire to a backup lamp circuit still.
What's the benefit of connecting the black wire to the chassis ground compared with using the ground wire from the lamp circuit?
Be sure you wire the camera for its own ground to the vehicle's chassis to provide for the best and safest power current.
Wow over 5 year having a boss camera that comes with my amp collecting dust on the garage and you just save that cameras life 😅😅😅gracias
Anytime!! 😃🤣
Excellent explanation of the wiring options.
Thanks! We hope this helps any do the install themselves and has helped you too
Thank you for making such a detailed video! You really helped me with connecting my backup cam
You're welcome! We are glad it helped
Will it work if you just connect the convenience wire to the trigger wire on the head unit, and the other end convenience wire to the camera red/power (grounding the black) without taping into the reverse light? Another way of asking is will the head unit provide the power for the camera
What brand and model camera do you want to install?
The trigger wire on the head unit is an input. It doesn't provide power output so no you can't do what you are asking. However most Android head units and some others have both a reverse trigger input to tell the head unit your car is in reverse and also has a camera power output which will send power to the backup camera to turn it on.
Great job, thank you for explaining this in a very simple way.
You're certainly welcome. We're glad that you found it informative. 🙂
Very good video. The only thing i couldn't resolve yet is... I connected the red wire to power of camera to the trigger wire but it didn't work because actually the head unit has a specific wire for 12v camera. I will connect that one, but i don't know where i can connect the trigger wire. Could i connect together as a three connects? Thank you 😊
Hi Rachel, the reverse wire generally connects at the radio. Be sure to refer to and follow your camera specific instructions.
I'm sorry to sound like a crutchfield fan boy but DAMN NICE VIDEO. Answered some questions very well that the thousands of other videos skated around on. Kinda tapped the issue than got distracted by a shiny light and abandoned it abruptly. Thank you
Thanks so much!! We're happy to help folks understand this and glad you enjoyed the video! 😄
Thank you for this amazing video! Very detailed and helped me wire my camera to my head unit. While both wiring diagrams did not help this video did!
You're welcome! Glad your installation went well.
Why not use a spdt switch to determine where the + 12v comes from? Either the battery for always on or the tail lights for backup only.
Each camera will specify the recommended options.