I’m so glad I found this video after weeks of nothing but actuator fixes and resets it lead me to the real problem of a broken door. Don’t want to drop the whole hvac just yet so drilled a hole and pushed it door shoot and used a plastic grommets to plug the hole!
Great video. Wish I would have found it before I wasted hours trying actuator resets, etc. Used a 6mm snake camera and saw that the driver's blend door is broken. As a temp fix, I put a screwdriver in to push the door closed as much as possible to use the AC until I have a lot of extra time to take the dash and HVAC unit apart. THANKS MUCH DG!
Thanks so much, i replaced my actuator and my new actuator was clicking thats when i suspected that the door itself was stuck closed not allowing the actuator to turn. No other video online visualized the door but your video did. Not sure if i want to replace the door it looks like a lot of work
Great video. My issue is, both sides are not changing temperature. I took the actuator off the bottom/drivers side blend door and operated it manually. It moved freely, opened and closed nice and crisp. I don't think it's a broke blend door but it's giving me all the indications of one. The other issue is the passenger side is doing the same thing. I hooked up a scan tool and manually actuated the blend doors and they seem to be following the commanded value. Any help or ideas would be greatly appreciated. This is my son't truck and he needs it back on the road asap. It's a 2006 Chevrolet Silverado 1500 4X4 with a 5.3 and an automatic. I'm not looking forward to removing the dash but I'll get after it if that's my only option. Thanks in advance.
What controls the air to the top vents? Mine hot and cold works. It’s just air barely comes out of dash vents above the radio especially the passenger side and seems like air is being pushed out the bottom
Literally the only video I’ve been able to find where the door it’s self is the problem and not the actuator. Does anyone know what size screws to use when reinstalling?
I’m so glad I found this video after weeks of nothing but actuator fixes and resets it lead me to the real problem of a broken door. Don’t want to drop the whole hvac just yet so drilled a hole and pushed it door shoot and used a plastic grommets to plug the hole!
Great video. Wish I would have found it before I wasted hours trying actuator resets, etc. Used a 6mm snake camera and saw that the driver's blend door is broken. As a temp fix, I put a screwdriver in to push the door closed as much as possible to use the AC until I have a lot of extra time to take the dash and HVAC unit apart. THANKS MUCH DG!
Derick! Your new shop is awesome! Looks like a great building.
Great explanation of how this thing works. Better than all the other videos just saying bad actuators
I have the reverse of this. Left is cold, right is meh.
Same
Thanks so much, i replaced my actuator and my new actuator was clicking thats when i suspected that the door itself was stuck closed not allowing the actuator to turn. No other video online visualized the door but your video did.
Not sure if i want to replace the door it looks like a lot of work
Good job on the video too bud. Thanks this was helpful
We are here!
I think my door is garbage on my 2500 so I gotta check lol
Great video. My issue is, both sides are not changing temperature. I took the actuator off the bottom/drivers side blend door and operated it manually. It moved freely, opened and closed nice and crisp. I don't think it's a broke blend door but it's giving me all the indications of one. The other issue is the passenger side is doing the same thing.
I hooked up a scan tool and manually actuated the blend doors and they seem to be following the commanded value.
Any help or ideas would be greatly appreciated.
This is my son't truck and he needs it back on the road asap. It's a 2006 Chevrolet Silverado 1500 4X4 with a 5.3 and an automatic.
I'm not looking forward to removing the dash but I'll get after it if that's my only option.
Thanks in advance.
What controls the air to the top vents? Mine hot and cold works. It’s just air barely comes out of dash vents above the radio especially the passenger side and seems like air is being pushed out the bottom
My 07 Silverado replace the door actuator and 1 month later something blows hot air again 😢
Literally the only video I’ve been able to find where the door it’s self is the problem and not the actuator. Does anyone know what size screws to use when reinstalling?