Sir I have purchased a used cement mixer,it has got really bad betting in the bottom cast of the cone,how to grind it for smooth finish, so that the concrete won't fix inside the bottom cone,any help in grinding the cast
Hello pradu if you watch all the video's in this series you will see what I did.I had to cut the top off the cone and use the milling machine to make a good surface then I put a brass sleeve before fitting the new bearing. good luck with yours Nigel
Sir Thanks for the reply,I don't have a milling machine,however I have hand grinding tool,if you can suggest a grinding wheel,for grinding the casting bottom of the cone.
Hi At .55 seconds the long bar running along the bottom of the barrel has 2 large bolts to hold the barrel shaft to the mixer, undo these bolts ( they brake off easy) then you can lift the barrel off the machine. good luck.
![[MPD직캠] 베이비몬스터 직캠 8K 'FOREVER' (BABYMONSTER FanCam) | @MCOUNTDOWN_2024.7.11](http://i.ytimg.com/vi/ylRx8QOuGXo/mqdefault.jpg)
wowwwww im impressed as this is what i will have to do when buy a mixer im looking at now
Hi anto glad the video helps.
im so grateful for this video is there a chance o can contact this man in the video fixing this winget
hello anto thanks so much for the kind words I am so pleased I can help others with the video's I do, Thx again cheers for now
Hi, I’m having some problems breading shaft away from the frame on my mixer. Any hints on how to separate the shaft from the machine?
Hi james if its the same as this one and the bolts have come out ok heat the frame if you can get to it ok and then a very big hammer :)
Sir I have purchased a used cement mixer,it has got really bad betting in the bottom cast of the cone,how to grind it for smooth finish, so that the concrete won't fix inside the bottom cone,any help in grinding the cast
Hello pradu if you watch all the video's in this series you will see what I did.I had to cut the top off the cone
and use the milling machine to make a good surface then I put a brass sleeve before fitting the new bearing.
good luck with yours Nigel
Sir Thanks for the reply,I don't have a milling machine,however I have hand grinding tool,if you can suggest a grinding wheel,for grinding the casting bottom of the cone.
Sorry prabu I can't help you with that good luck
Ok sir, thank you
How to remove the barrel
Hi At .55 seconds the long bar running along the bottom of the barrel has 2 large bolts to hold the barrel shaft to the mixer, undo these bolts ( they brake off easy) then you can lift the barrel off the machine. good luck.