Stucco or mortar mixers how to repair
ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2012
- Stucco or mortar mixers how to repair.
Folks, we are located in Oakland, CA.
FYI, folks, here are all the basic tools we use and recommend on Amazon's website.
www.stuccoplastering.com/tools/
Live long and plaster hats, shirts, and other cool stuff. www.livelongandplaster.com/
Kirk Giordano Plastering Inc.
Send pictures to Jay or myself at our sites below for immediate bids.
www.StuccoPlastering.com/ Kirk’s website.
www.GiordanoPlastering.com/ Jason’s Website.
Here’s how to mix in these, • Stucco mixing ratios s...
Learn to do minor maintenance or repair ball bearings in a stucco mixer.
Whether your stucco mortar mixer is a MultiQuip or Whiteman.
They are similar to repair.
I have always preferred Essick mixers with Honda engines, which are incredibly reliable.
In fact, my current mixer is an older Essick with a steel drum.
The mixer in this video has a lightweight polyurethane drum and is hydraulic, the Cadillac of mixers.
Or, these days, we’d say it’s the Tesla of mixers.
How many have I owned? About 5 in the 40 years since I have been in business; some were fully hydraulic with polyurethane drums with the simple pulling of a switch, they dumped or set back up by themselves.
This video won’t help anyone learn how to apply any stucco.
But it will help those who have to redo the bearings, coupling replacements, or other parts that give way on our (Multiquip) MQ-, (Whiteman) WM- 120 mixers by the usual wear and tear.
It’s a real drag to fix these yourself. So again, I would recommend Bay Equipment in Fremont, ca.
Their number is 510 226-8800.
They sell and repair these mixers, plastering pumps, and more.
Essick 12 cu. ft. Mechanical Masonry Mixer.
Thank you Kirk for taking the time to video this great info!
Howdy Duane, no worries, it's kinda complicated, but the sheer-pins are necessary for all stucco contractors or Hod-carriers to know about. 😉
Kirk, Jason and the entire family. All the best from Vallejo California! Love all the videos you make, great information.
Howdy Doug, thank you, we just did a job in Vallejo, that is set to air in an hour and a half, We're neighbors.
Howdy Dusty, my baby Jacqui, was actually holding that cup of tea for me, I need a big cup when I’m working on mixers, as it’s boring work and a bit of a drag.
If I bring it to a shop I have to wait forever most times if I do it myself it’s mighty boring, but it’s ready when I need it. Most times anyways.
Best wishes, and have a good evening!
Kirk Giordano Plastering
Kirk you are the MAN! always have the best info. Thank you for your videos you are the BEST!
Howdy Andy, you are too kind, thank you.
@Kirk Giordano plastering Inc. im honored you responded! I opened a company Maryland Stone Masonry & Repair 6 yrs ago. it's my 18 yr old son and I. We take on pretty big jobs for 1.5 men lol. Anyway just letting you know how much youve made a difference and how much your appreciated. Workwise we are so so similar and the world needs more people like you! Thank you for being such a great example! Love from my family to yours God bless & take care brother.
Dang!!! I want a Coffee mug like the one your Mrs. is holding! That would be just my size!
Hey homebrew, I don’t enjoy working on mixers or removing stucco from walls. But sometimes you got to take the bad with the good. And besides lots of times I want to know it’s done right.
Have a great evening.
Kirk Giordano Plastering
Good kirk im stucco subcontractor from corpus christi tx.
Good evening Gilberto, as a rule, these days into the shop they go.
The most complete plastering encyclopedia in the world on video, by the plastering messengers of TH-cam.
Over 850 free self-help videos 🎭 👀💃
Glad i watched this. I was about to buy a used one in BAD shape and 'fix it up' i will pass now.
Good evening, if you're going to buy a plastering mixer, buy one that is as new as possible, new they sell for about 3,500 dollars, I find almost new ones for about 1,500 dollars, Craigslist is your best bet and be prepared to drive sometimes for an hour for a great deal.😉 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel,
and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk & Jason Giordano Plastering
I've been a mortar mixer for mason crews for 25 years I hear these things in my sleep
Evening Donald Dude, unfortunately, so do I,
Peace, love with happiness to all.
Kirk Giordano plastering tips-mixed with sound advice
What V-belt size does the mixer use ? Is it a standard size for all mixers ? I have one just like yours
Good evening Gerardo, no belt, a transmission powered by 12 house power honda engine.
The most complete plastering encyclopedia in the world on video, by the plastering messengers of TH-cam.
Over 850 free self-help videos 🎭 👀💃
Is this the just about the same on all of them? I got a 655pm stone that showed up at my place to get fixed the bearing are just about completely gone to the point that the shaft is riding the drum I hope when I get it apart the shaft has not been worn to bad.
Howdy new generation Dude, I have found some are o.k. and some needed all new bearing , it socks, maintenance is the key. Easy to say damned difficult to do.
By the way, I have lost three wheels from pulling mixers, Once I was on the freeway and saw a tire with rim pass me, then I heard the crash, good thing traffic was heavy and I was in the slow lane.
I pulled over found the sheared off rim and tire, called a tow truck and got the beast home,
I now grease my wheel bearing often now and have self greasing wheel caps too.
Cheers, kick back relax and enjoy the superbowl.
FYI, all of us here at the giordano plastering channel we wish to thank all our subscribers and those of you who accidentally stumble on our channel a happy and prosperous new year
kirk giordano plastering
The one that showed up for me to work on I have found out they have never greased it smh every bearing from the wheels up are shot I'm waiting on them to call me back so I can see what they want todo the bearing that's the worse are the ones that on the drum the shaft is literally riding the drum there is no bearings they are completely gone and I don't even know where to buy one I found the bearings they are $100 each. I personally think it would be best off if they buy a new one. Because the parts and labor alone is going to run easy run up to $1,000
Do you know where I can find all 4 bearing for the drum and the 2 bearings that run the gears that turn the Output shaft? I need all of them unfortunately.
My shear pin keeps snapping of even when wet mud should I just sell it and buy a new one
Good evening Jose, it sounds to me like you need to take the front cap off that holds the grees for the shaft and grease it plus the other rear shaft there are 4 grease fitting that more than likely need a full tube of grease.
I grease mine when it's running as it distributes the grease well.😉
No grease broken shear pins, it like you plastering all day with no food. Grease um.
Let me know if that works
Our unique plastering Tip: all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.stuccoPlastering.com
www.bayareastucco.com
I just need to change the bearing closest to the motor on an 85 5 p.m. Stone mixer can't find any info that someone pulled apart but was wanting to make sure
Howdy Chris, I have done this a few times but didn't do the videos to show how it's done, surely someone else has it posted hera on youtube?
I will say this not to discourage you, it's a bit of a drag to do.
Happy holidays and a merry christmas,
Kirk and Jason's Plastering tips
Where can I order the parts ?
Hello Michelle, That information is in the description; cheers.
This is professional?
Greetings Jose, it's only professional, if you think it's professional. No interest, no worries.😉 Our unique plastering Tip: all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk & Jason Giordano Plastering