I've had a few different frames with that sandwiched foam/wood carbon fiber design and they're not durable at all, they always break rather quickly due to that type of construction. Great overview though brother, keep up the awesome work 👍
Your review sold me on this one....So stoked...Hitting it with Nano 1300 and Tattu 1300...instant 100mph punch outs. Where did you get those stick ends. Think I might have seen em on B.G. Peace out.
Can you tell where your receiver cables are soldered in the F7 board? im kinda lost in this, i put mine on T4 (yellow), T6 (Red) and Ground (Black), and i have the R-XSR receiver. it has another cable with SBus but i didnt know how that work so i went simple with 3 cables.
They put that liquid electrical tape on the Kopis 1 as well I have one its nice touch but it's not that easy to remove for when you want to add an low esr capacitor like I did kind of a nightmare then
Thank you. Why in my kopis 2, arrived yesterday, the Max Vel Deg/s of yaw is a little bigger, despite the rates of pitch, roll and yaw are equal? Thanks
I think, everybody should at least be flying 8k/8k and with this f7 fc you could even run 32k/32k update rate. But, there is a lot more tuning of the filters to be done, once you enable 32k mode.
@@maposcha Forgot about this :) I actually took it on its maiden voyage two days ago. Two FETs on the ESC exploded mid-air - probably shouldn't have run it on 6S with 4.5 pitch props... I did recover the quad though and have ordered the metal 65A ESC from Holybro to replace the fried one :) I'm running 8/8 since BF 4.0 has disabled support for anything higher due to excessive noise and whatnot, never flew it on BF
BigFuzzyArchon do you still wanna sell your hawk5? If you do , and for a reasonable price , email me at rickyleeva@gmail.com. Hawk5 is my favorite quad so far. I still ordered the kopis 2 but it won’t here for two weeks.
4:48 gets JUICY!!! talkin bout nuts droppin gettin down and screwin away and its especially nice when you get your fingers just 'right down there" and go to town screwing away!!!! sound like my kinda flight dayyyyy ladiesssss
Nice quad. Yes, you’re right about the TOP plate. Why is it so boring in such a nice quad. And what’s with the receiver on the top plate? Is there no where else for it. Silly to have that top plate issue. Why don’t you ever do flight reviews by the way? Peter.
@@Stage2_392 I don't see the feed forward as a big improvement to the pid loop. Just swapped out setpoint weight with something else.. The filters are the same. Now you are able to change the filter settings of the dyn notch. If you leave them stock, they are the same as before.
Man! This was my first setup! Thank you very much for explaining and going step by step! Taking it outside in a few! Thanks again!!!
I have been looking at the kopas 1 for a long time and now as a V2 .
I can't wait to get my hands on this quad thanks for the information. JohnnyDRC
I've had a few different frames with that sandwiched foam/wood carbon fiber design and they're not durable at all, they always break rather quickly due to that type of construction. Great overview though brother, keep up the awesome work 👍
In the video description it says "25km Range on these awesome VTX's"
are you sure that it's 25km?
Nice video :)
Will you show us a flight video with this quad?
I just git mine and antenna is a stubby foxeer now very cool video very helpful
Which firmware version is betaflight on I need to update to 3.5 latest firmware
Awesome quad!! What utility would the barometer have enabled?
Your review sold me on this one....So stoked...Hitting it with Nano 1300 and Tattu 1300...instant 100mph punch outs. Where did you get those stick ends. Think I might have seen em on B.G. Peace out.
Can you tell where your receiver cables are soldered in the F7 board? im kinda lost in this, i put mine on T4 (yellow), T6 (Red) and Ground (Black), and i have the R-XSR receiver. it has another cable with SBus but i didnt know how that work so i went simple with 3 cables.
Awesome, dude! Really nice! 😃
The grip tape on my X7S was wearing out too. I had to glue it down so it didnt get worse.
Same for me after just some weeks... Grrr!
What flight time do you get out of these? What size battery?
Hey
Where is the video from flying and testing thanks 😊
They put that liquid electrical tape on the Kopis 1 as well I have one its nice touch but it's not that easy to remove for when you want to add an low esr capacitor like I did kind of a nightmare then
Thank you. Why in my kopis 2, arrived yesterday, the Max Vel Deg/s of yaw is a little bigger, despite the rates of pitch, roll and yaw are equal? Thanks
bro the screws on the top of mine 8:53 , are way too tight, i accidentally stripped them as i tried to open. any solutions? thanks
Smart port is the receiver telemetry, not to control the vtx.
For the vtx the protocol is called "smart audio". Just want to correct what you said.
Also... "Flip after death"... That is a new one 😂
I think, everybody should at least be flying 8k/8k and with this f7 fc you could even run 32k/32k update rate. But, there is a lot more tuning of the filters to be done, once you enable 32k mode.
32k/32k overloads the CPU on my Kopis 2. 32/16 peaks just below 50%...
Haven’t updated to 4.0 yet (too cold to fly anyway) but will try to remember to respond here if I experience and fix any issue :)
@@rmariboe Hey, any news on that? Do you fly on 32/16?
@@maposcha Forgot about this :)
I actually took it on its maiden voyage two days ago. Two FETs on the ESC exploded mid-air - probably shouldn't have run it on 6S with 4.5 pitch props... I did recover the quad though and have ordered the metal 65A ESC from Holybro to replace the fried one :)
I'm running 8/8 since BF 4.0 has disabled support for anything higher due to excessive noise and whatnot, never flew it on BF
@@rmariboe thanks!
your "angle mode" requires accelerometer enabled...(and more data for BlackBox ;)
i have a semi broken Hawk 5, might sell off the parts on that to buy this quad. Looks great.
BigFuzzyArchon do you still wanna sell your hawk5? If you do , and for a reasonable price , email me at rickyleeva@gmail.com.
Hawk5 is my favorite quad so far. I still ordered the kopis 2 but it won’t here for two weeks.
Shame it is not full carbon, btw any plex on the frame ? All components are top. The only unknown is the frame.
Something different don't need to by bad I think 🤔🤔
Are you doing a HD version?
Will you show your pid now?
what you think about Holybro Kopis 2 upgraded by Rotorriot editiion?
4:48 gets JUICY!!! talkin bout nuts droppin gettin down and screwin away and its especially nice when you get your fingers just 'right down there" and go to town screwing away!!!!
sound like my kinda flight dayyyyy ladiesssss
LOOOL XD
Why do you not like stretch x frames?
The lollipop antennas don't do very well in testing Ive seen.
Thanks for the overview! :)
Give it a 3.5 update flys so much better really like the feed forward maybe when you do the test can do it and compare them.
Nice quad. Yes, you’re right about the TOP plate. Why is it so boring in such a nice quad. And what’s with the receiver on the top plate? Is there no where else for it. Silly to have that top plate issue.
Why don’t you ever do flight reviews by the way?
Peter.
The top plate is like that for top mounting the battery.
If that was so wouldn’t there be LiPo strap slots there?
No it wouldn't.
While the top plate looks half-assed, I really like the looks of it. Very out of the box and simple.
1st lol... Keep up the great work buddy!
Lol my 3mm screws are slipping. Whoever designed this really wasn't thinking when choosing screws. Amazing
Can this be binded with a QX7?
Yes 100%
@@DroneMesh Thanks bro
THANK YOU!!!!!!!!!!!!!!!!!
Very helpful thanks
Super cool😏😲
Oh I see 3.4 firmware that thing is gonna fly like crap u need to update the firmware to 3.5
I didn't really see that big of a difference going from 3.4 to 3.5 with my 5inch.
@@pippifpv you should have bc feed forward was added and there were different dynamic filters added.
@@Stage2_392 I don't see the feed forward as a big improvement to the pid loop. Just swapped out setpoint weight with something else..
The filters are the same. Now you are able to change the filter settings of the dyn notch. If you leave them stock, they are the same as before.
Don't buy the pnp buy the bind in fly I went thru so much Receiver bullshit😠 with the pnp model