Jobs that threaten my sanity - Ep. 1: iPhone 13 Pro Ram Replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ม.ค. 2025

ความคิดเห็น • 72

  • @CL-yp1bs
    @CL-yp1bs 16 วันที่ผ่านมา +10

    Bro, this is crazy. You are so far ahead of everyone else I see on TH-cam. there’s only maybe one or two other people I’ve seen doing board repair even close to this level on iPhones. It’s so much smaller than working on a MacBook.

    • @iBoardRepair
      @iBoardRepair  16 วันที่ผ่านมา +5

      I really appreciate that! This is basically what I have dedicated my adult life to so I want to be at the top level.

    • @darmogandol-z5j
      @darmogandol-z5j 10 ชั่วโมงที่ผ่านมา

      china,india and a lot of southeast asian technician doing ram replace only and they do it under 2 minute...but aaron doing good work,he have a good patience.salut my brother

  • @Edge-71
    @Edge-71 15 วันที่ผ่านมา +2

    I’m so happy to see results when u have put in so much work Aaron, and customers get there data .. well done 👍

    • @iBoardRepair
      @iBoardRepair  15 วันที่ผ่านมา

      I appreciate it!

  • @Alkabeer1820
    @Alkabeer1820 13 วันที่ผ่านมา

    Hi Aaron i really like your patience while replacing this RAM on this iphone, it was a very insane job and a time consuming process thanks for sharing and teaching us your way of work in iphone

  • @muyiwaawosanya7943
    @muyiwaawosanya7943 16 วันที่ผ่านมา

    I do watch your videos days and nights just to be able to catch up and continue learning from you especially on dead and low amperage’s draw

    • @iBoardRepair
      @iBoardRepair  16 วันที่ผ่านมา

      Thanks for watching! Yes, I do a lot of videos for those types of problems.

  • @abdomocrim7526
    @abdomocrim7526 11 วันที่ผ่านมา

    Thanks for this this actually a good example of never gave up on a job you worked so hard on it and I paid off unlike me I give up after my first a attempt thanks you very much for this

  • @mrbigb12
    @mrbigb12 16 วันที่ผ่านมา +1

    Yessss great to see a video 😄

  • @drAhmadmokhtar
    @drAhmadmokhtar 7 วันที่ผ่านมา

    It's insane work...bravo bro👏🏼👏🏼

  • @profaneus
    @profaneus 8 วันที่ผ่านมา

    just a question, if you put flux only on the edge, makes an O form with air in the middle, what happens the air trapped in the middle, it can lift the top and make it difficult to lay down on the solder balls, am i wrong? the trapped air acts like a lifting force

  • @laurenceosborne4261
    @laurenceosborne4261 7 วันที่ผ่านมา

    Sir where did you get the ram chip? 🙏🏻

  • @muyiwaawosanya7943
    @muyiwaawosanya7943 16 วันที่ผ่านมา

    Your confidence is top notch and will be nice if you can comment on goal when working on any part and the details to follows and things to avoid all this will make some to skip meal just to catch with your videos

  • @rfr653
    @rfr653 7 วันที่ผ่านมา

    Good job mate 👏

  • @TheDoru00
    @TheDoru00 13 วันที่ผ่านมา

    Your not from this planet 😮 awesome job sir , thank you for sharing 🙏

  • @yosie73
    @yosie73 14 วันที่ผ่านมา

    great job sir!!! not giving up ✅✅✅

  • @yavuzlife8311
    @yavuzlife8311 วันที่ผ่านมา

    hey man. Just a quick question. What is the error code 75 when upgrading a 13 pro max through mac? Right in the beginning of updating, it gives that error out and iphone is stuck in upgrading bar. Appreciate any comments.

    • @iBoardRepair
      @iBoardRepair  วันที่ผ่านมา

      Usually that indicates some sort of NAND corruption. There is not usually a way to retreive data with that error. You can try to restore the phone to make it work. It may or may not restore.

    • @yavuzlife8311
      @yavuzlife8311 22 ชั่วโมงที่ผ่านมา

      @ ty for replying. Well, initially I was about to complete upgrading. But it was rebooting before installation complete. I changed proximity sensor, no more rebooting. But it is giving this error now. Do you think any caps are shorting in my case too?

  • @fixthetempo7276
    @fixthetempo7276 6 วันที่ผ่านมา

    hehe )) i remember my repairs gen 5-6-7 with CPU and RAM reballing a lot. Good old times))
    good job bro.

  • @Ryan53799
    @Ryan53799 15 วันที่ผ่านมา

    Great work! I usually allocate 2 hrs max to a device before deem a no fix

    • @iBoardRepair
      @iBoardRepair  15 วันที่ผ่านมา +3

      I occasionally have nightmare jobs like this that push far past 2 hours, but I know if I can't get the data then no one else will so that motivates me to keep going.

    • @karthielectronicsofficial4848
      @karthielectronicsofficial4848 11 วันที่ผ่านมา

      @@iBoardRepairthat’s so kind of you sir
      I hope you change as per the amount of hard work

  • @hasnainj71
    @hasnainj71 16 วันที่ผ่านมา

    Will you make video on iphone parts which can't be replaced....and second thing make video on iphone baseband...

  • @JohnWilliams-zo5jf
    @JohnWilliams-zo5jf 15 วันที่ผ่านมา

    Keep up the good work❤❤🔥🔥

    • @iBoardRepair
      @iBoardRepair  15 วันที่ผ่านมา

      I will try to!

  • @thatonedude6950
    @thatonedude6950 12 วันที่ผ่านมา

    Where is the die of the cpu? it looked like the stuff you were scraping from the beginning was important, but the phone still turn on! What even was that?

  • @fixthisone
    @fixthisone 16 วันที่ผ่านมา +3

    The secret to ram swap is to get as much glue off the top of the cpu as possible so it can seat properly

    • @iBoardRepair
      @iBoardRepair  15 วันที่ผ่านมา

      I try to get it as flat as possible!

  • @muyiwaawosanya7943
    @muyiwaawosanya7943 16 วันที่ผ่านมา

    Good job boss will be nice if you can always state your temperature settings
    And also will appreciate if you can make a video of full boot sequence

    • @iBoardRepair
      @iBoardRepair  16 วันที่ผ่านมา

      I have a camera on my temperatures nearly all video so you should be able to always see them

  • @PhoneRepairRO
    @PhoneRepairRO 14 วันที่ผ่านมา

    Nice! On iPhone 7 i was doing this. From there i stoped changing ram :)))

  • @muyiwaawosanya7943
    @muyiwaawosanya7943 16 วันที่ผ่านมา

    Ram is one of the task I always avoid on iPhone and also wanna ask cpu swap on iPhone 7 or 8 will it require reballing or changing the PMIC too

    • @iBoardRepair
      @iBoardRepair  16 วันที่ผ่านมา

      It depends. It is safer to just replace but you can sometimes get away without.

  • @sankagrigorian6150
    @sankagrigorian6150 12 วันที่ผ่านมา

    Спасибо за очень классное видео, Вы мастер от Бога ,Я Ваш подписчик из Грузии,

  • @muyiwaawosanya7943
    @muyiwaawosanya7943 16 วันที่ผ่านมา

    Since there’s no shorted line on the ram and still remain same condition after the cpu swap are you replacing this ram based on hunch or guess?

    • @iBoardRepair
      @iBoardRepair  16 วันที่ผ่านมา

      Yeah I suspected RAM but had less hard evidence then I would have liked.

  • @Tools_mandal
    @Tools_mandal 12 วันที่ผ่านมา

    Your microscope model name

  • @razikrazi1835
    @razikrazi1835 15 วันที่ผ่านมา +1

    Love from India brother 🤍 keep working ❤️

  • @raulmorel1872
    @raulmorel1872 4 วันที่ผ่านมา

    Good job.

  • @blackphonetreinamentos2024
    @blackphonetreinamentos2024 15 วันที่ผ่านมา

    tanks Gosh,after 4 hours for hardwork.i can belive...

    • @iBoardRepair
      @iBoardRepair  15 วันที่ผ่านมา +1

      It was even longer if you consider the CPU swap before this.

    • @blackphonetreinamentos2024
      @blackphonetreinamentos2024 6 วันที่ผ่านมา

      @@iBoardRepair yes, this job is very hard some time.

  • @SmartphoneFixNorway
    @SmartphoneFixNorway 9 วันที่ผ่านมา

    Patience make master god Job Brother

  • @LecomteRepairServices
    @LecomteRepairServices 15 วันที่ผ่านมา +1

    There are so many things to say... First, your resilience and skills are impressive.
    Also, how can you be so confident that you're not damaging the CPU, by scraping the RAM like that? The experience looks so traumatic, and the CPU is so fragile. You could do this with a CNC machine; there is a learning curve, but it is the right tool for this task. And it can be used for other stuff in our line of work. The most basic $300 hobbyist CNC is good enough, your RAM would be ground off in about 5 minutes.
    Regarding board holders, I strongly recommend the AMAOE Mfix/MBGA line.
    Looking carefully at the footage, it seems that the pieces of the CPU chipping off were already there. So either it was originally like that, or it happened during the CPU swap.
    Congratulations on this successful repair, and on the intuition. No need to apologize for the length, and the multiple tries: the audience for that kind of contents exists. 😀

    • @iBoardRepair
      @iBoardRepair  15 วันที่ผ่านมา +1

      I have been removing ram this way for years, I think the first time I did it was on an iPhone 7 who knows how many years ago. I am pretty sure I have a post of that one somewhere on my IG. Also, I have another video with this type of removal from over two years ago: th-cam.com/video/9g0PFEy1J3E/w-d-xo.html (I also show the RAM harvest in this one)
      Awhile back I had heard that using a CNC risks going too deep and damaging the CPU and that it was pretty difficult to set up properly. I don't really know if that was really the case or if things have changed but that was always at the back of my mind. Like I mentioned at some point in the video, the cpu is actually way below that black/green substrate so there is actually a lot of room for error. I have had a few cases where it was cracked pretty deeply and still the CPU was okay. I guess that also means that using the CNC would also have a lot of room for error.
      I tend to get set in my ways and I have had a lot of success with this method which is why I never changed it up. RAM work is very rare but if I had to do it more often I might look into other methods. At this point, I only do it a handful of times a year. I don't think I have ever damaged the CPU with this method except in the very beginning when I was still getting a feel for it. And of course I practiced on donor boards before I ever attempted it on a real data job.
      Anyways, thanks for watching and I appreciate the comment!

    • @LecomteRepairServices
      @LecomteRepairServices 15 วันที่ผ่านมา

      @@iBoardRepair A hobbyist CNC is precise up to 0.01mm. Meaning that, if you really wanted to be extra careful, you could do as many passes as you want, drilling 0.01mm deep each time.
      Of course, this is not the most effective way to do it because you'd need a few hundred passes. A correct way (among others) would be to practice on a sacrificial CPU to get the precise thickness of the RAM. Say you get 2.3mm. Of course, all CPUs are not perfectly identical, so when drilling the real one you want to work on, you'd do a first pass 2mm deep. And then additional passes at 0.1mm.
      Like any tool, there is a correct way to use it for each application. The point being that, if you do things properly, the risk is minimal.
      Anyway, I purchased one 2 years ago. First, it was to deal in an elegant way with shields: just drill out the part of a shield you'd like to remove. Or drill out the whole shield. Whatever the situation, it is better than heating the whole board to remove it. And less violent than ripping it off (look at my last video, where I do a little damage by ripping off a shield).
      Then I used it to remove "annoying" chips. For example, a defective PMU, densely surrounded by small components: just drill it, no risk of overheating, no risk of solder balls coming out, no risk of disconnecting a tiny component.
      And I have other usages for it. Anyway, watching you do the RAM, I thought: I'd definitely use my CNC for that. Of course, if you're satisfied and experienced with your way, no need to change. I'm in no position to argue since I don't do CPU work.

  • @rekulki
    @rekulki 16 วันที่ผ่านมา +1

    Dobra robota 💪

  • @neolabsScience
    @neolabsScience 14 วันที่ผ่านมา

    Master 🙏

  • @yunuskhan5763
    @yunuskhan5763 2 วันที่ผ่านมา

    too more hard work but ram changing is too hard work at all good done

  • @repairyouriphone1696
    @repairyouriphone1696 16 วันที่ผ่านมา

    Thanks four this videos

    • @iBoardRepair
      @iBoardRepair  15 วันที่ผ่านมา

      You are welcome!

  • @neolabsScience
    @neolabsScience 14 วันที่ผ่านมา

    Masterre ❤❤❤

  • @dennispowell7719
    @dennispowell7719 15 วันที่ผ่านมา

    welldone arron

    • @iBoardRepair
      @iBoardRepair  15 วันที่ผ่านมา

      I appreciate it!

  • @vikrantjadhav9308
    @vikrantjadhav9308 6 วันที่ผ่านมา

    Awsm❤

  • @cellteknikelektronik4277
    @cellteknikelektronik4277 4 วันที่ผ่านมา

    hi, I would appreciate if you add subtitles

  • @vikashkuswaha_8955
    @vikashkuswaha_8955 6 วันที่ผ่านมา

    Sir my English is not that good but I still watch your video, please translate it in Hindi

  • @unebonnevie
    @unebonnevie 11 วันที่ผ่านมา +1

    Apple makes it really, really hard to repair their products! They really want you to buy a new one of your product, if something small goes wrong!

  • @corel965
    @corel965 15 วันที่ผ่านมา

    This man iz crazy 4 hours ?!!!

    • @iBoardRepair
      @iBoardRepair  15 วันที่ผ่านมา +1

      It was even longer when you consider I did a CPU swap before this footage.

    • @corel965
      @corel965 15 วันที่ผ่านมา

      @iBoardRepair man this is insane you are from another planet 😂

  • @ahmettay2382
    @ahmettay2382 8 วันที่ผ่านมา

    man cmon you did WHAT? OMG

  • @rahdilshan.p
    @rahdilshan.p 7 วันที่ผ่านมา

    🔥🔥😮👏🏻

  • @HubbleRocks
    @HubbleRocks 15 วันที่ผ่านมา

    Nice work. Definitely a tedious job. Please work on your chair next. Squeaking intensifies...

    • @iBoardRepair
      @iBoardRepair  15 วันที่ผ่านมา

      Sorry about it!

  • @Techkorede
    @Techkorede 16 วันที่ผ่านมา +1

    Employ me as your work partner I’m from Nigeria 🇳🇬

    • @iBoardRepair
      @iBoardRepair  16 วันที่ผ่านมา

      Hello, Sorry I am not currently partnering with anyone. Thanks for watching though!