Advanced Data Recovery for Broken iPhone 13 Pro - Motherboard Troubleshooting and Repair

This video will showcase several different motherboard repair skills. First I identify that there is a short on the motherboard, causing no power. I measure the most common lines first (main and boost) to find they are not the culprit. I split the motherboard interposer (sandwich) to expose all the components and determine the PMIC is the cause of the amp draw before prompt to boot (the problem). This is seen with the help of freeze spray and voltage injection.
The PMIC removal is done with great technique. If you struggle with underfilled chips, pay close attention that part.
I had no replacement PMIC's in stock, so you will also see how I harvest a donor iPhone 13 Pro PMIC from a donor motherboard and reball it. This requires careful work. The PMIC is very delicate so it is quite difficult to pull and clean it without damaging it.
If you want to send in your own iPhone for data recovery, fill out the intake form here: www.iboardrepair.com/
Join my iPhone Motherboard Repair & Data Recovery Discord Server (mainly for techs): / discord

[@milencebrat2785]

Svaka čast burazeru.
Pozdrav iz Srbije 👋🏻

[@asifsidd1652]

thing you, please make a new how to read schematic diagram any iPhone basic to advanced and explain circuit net names.❤❤

[@train4905]

Awsome job sir😊

[@mohamad-qh5px]

Your skills are excellent, I am always learning from you❤❤

[@iBoardRepair]

Thanks for watching!

[@Victor-ez7fl]

Aaron like always 💯 gets it done 👍

[@iBoardRepair]

Thanks bro!

[@rv_123_94]

REALLY REALLY SMOOTH BLOWER OR SOLDERING . Im so Love it . May be, i have to use your style Soldering 😅 . Love it

[@mirceaalicu]

Great video Aaron!
It is interesting to see different technicians using different techniques to deliver same results. This is for all people asking about what temps you use to do this and that. It’s all about the feel and all about what suits you as a technician. BTW: I had a 13 pro with the pmic cracked the same as yours

[@iBoardRepair]

Thanks buddy! I agree, temps don't matter because it is unique and individual for each person, and mostly based on feel.

[@uliseslopez1481]

@@iBoardRepairhey there so I got an iphone11 back light issue was wondering if you have a store I can sent it to fix or if you can for me by any chance ??

[@iBoardRepair]

you can fill out the intake form at my website to send it in: www.iboardrepair.com@@uliseslopez1481

[@toprich7259]

Great job sir u are the best

[@iBoardRepair]

Thanks!

[@iquniq392]

Is the schematic for the iPhone 13 Pro the same as the iPhone 11, where the V batt and VDD Main directly or is it different like the generation 7 plus, 8 plus or x, the V batt and VDD Main separately after passing through the Mosfet? Thank you sir

[@H0mework]

Hey Aaron, are you worried about the damage that resin or flux will affect you? I think over a long period it affects your sinuses. I can't see your entire setup but I hope your lungs are ok! Thanks for the videos

[@iBoardRepair]

At this point I have a fume extractor that pumps it right out the window, but I haven't always had such a good setup! You can see the black vent under the microscope.

[@molaosolaim1694]

❤❤ Idol

[@iBoardRepair]

Thanks for watching!

[@Dawgsees]

great vid...what solder paste are you using btw.

[@iBoardRepair]

I used 183 in this vid

[@hrishiksingh5261]

I have a iPhone 11 pro max and it’s nand is cracked, is it possible to recover the data?

[@user-kl6ji3hn7r]

What you do is incredible... Anyone you can refer me to in Istanbul?

[@iBoardRepair]

Sorry I don't know anyone there

[@irepairslimitlessmike]

What microscope do u use???

[@iBoardRepair]

Parco

[@user-kl6ji3hn7r]

Anyone in Istanbul that can perform this? Please

[@microsoldergeek]

All thumbs up for you sir 🫡🫡

[@naveenola2561]

Sir your Instagram account???😊