If prepped and painted properly then the paint will hold up perfectly fine by itself! If you want to add extra protection and change the sheen, we recommend using one of our new finishers, Angelus 4-Coat.
Question - for the Angelus "Finisher" - do I need to paint finisher on the entire shoe or just the painted areas? Also - should I add Angelus "Duller" to the finisher....I do not want shiny shoes! I added "duller" to the colors I used and it came out nice and matte. Is one thin coat good enough? Thanks SO much!
You only need the finisher on the areas painted. However, if you used duller, do not use finisher. It defeats the purpose since you then cover the paint. We do have a 4-Coat FLAT finish that is FLAT. You can apply that after any Angelus paint color you use and still have that flat look.
This always depends on personal preference. Each finisher will give it a specific sheen. For Nike AF1's you can really use any of them you prefer. Matte is the more popular ones for AF1's.
just a general question. if you but down all the factory finish from the shoe and but at the end just a finish over the paint layer not the whole shoe, isn't bad for the shoe? =)
When you are working with that Fabric material you can mix our paint with our Angelus 2-soft fabric medium. Mixing the 2 will help the paint adhere on that type of fabric materials and shouldn't dilute the colors. We suggest very light, multiple coats allowing each coat of paint to dry fully. Feel free to send us an email with a photo and we may be able to help. Contact us at Info@angelusshoepolish.com
All it takes is proper prep and application. When prepping the area, we suggest using our Angelus Deglazer or Acetone to remove the factory paint/finish. This will allow Angelus paint to adhere better to the surface. Also, applying several thin coats of paint rather than one or two thick coats will help a lot more. No additives are needed when painting on leather. 2-Hard is only to be used on plastic or non porous surfaces. Hope this helps!
Gorgeous shoes. I have seen someone else say that you should always mix it with a fuller to have that professional quality are you using the acrylic matte to achieve that quality?
No, it's really not necessary. Just make sure to shake the matte finisher really, really well before using it. Apply light coats and use a heat gun or hair dryer and this should help give it the matte look you are going for.
Here is the link to the tape that was used. If you have any more questions feel free to contact us at Info@angelusshoepolish.com angelusdirect.com/search?q=tape
Hi there Angelus Shoe Polish.I love your channel and watch and learnt a lot from it. i am a young aspiring artist who wants to start custom making strictly nike airforces, but the truth is i cannot afford these angelus paints or brushes right now.Down here where i am from in west africa getting a job is one of the hardest tasks a young man or woman can go through., and i have waited enough to get a job. i want to appeal for aid to get some custom work supplies. so i can start something on my own with mny God given talent. i'd very much appreciate it if you can reply back to me sometime. Thanks!
Did I miss the part where you explained how to get even coverage with no more brush strokes? Oh wait no I didn’t cause that shit was never explained 👍🏼
These are amazing tutorials . You know its real talent when they make it seems so easy 😂
Wow. Great work. This custom is right up my alley. Love Dragonball
I love anime and dragonball Was a first
Love the way you detailing. Can learn too many things from you. 😍❤️😊
Quality content, hope to see this artist more often. Subscribed
Damnnnn these are nice, you got some crazy skills👌👌
best custom I've seen in my life
Work of art. Passion. Labor of love. Kudos young man.
I'm in love with these shoes!!😍😍 and you make the tutorials like a walk in the park lol you got crazy mad skills my man!! Keep up the hard work 🤙
Wow the Shenron and the dragon balls art looks really great good skills
Very cool. Excellent marketing idea. I do trust and intend to get some Angelus paint because of this. Thank you
My hands be shaking like nokie 3210 when im doing lining but this dudee is like chill asf. 💯
THAT IS SOOO AMAZING...SIMPLY BEAUTIFUL!!!
He needs a TH-cam channel of his own!!
Good job my friends.
Best custom so far
That shenron af1 is just ill... Great job
AWESOME JOB, DBZ one of my fav Anime.Thx for bringing it to Life🎨🤘🏽
These are awesome!!! That shading job was 💯
This dude is talented as hell 🤩🤩
Those are so clean I love it!!!!!
when you wash your shoes does the paint go out
I love it!!! I just want to know about your brush. I felt...really hard to control my brush.
Dude crazy talented!
Can you use a hair dryer instead of a heat gun?
Yes. I did that before o got a heat gun. Start with the low setting tho to test the heat.
Thanks, Antonio Jones! I appreciate it
I will be "Paintin' on Some Ones!!!" 🎨🎶🔥🔥🔥💰💰💰
Fresh 👌👌
Excellent work
Nice job man!!
Great tutorial, what's the brand of removable vinyl your using?
awsum work bratha
Hi Dude nice job tell me some, Is it important to apply the Angelus Finisher? what will happen if u don't apply that? will the paint chipped off?
If prepped and painted properly then the paint will hold up perfectly fine by itself! If you want to add extra protection and change the sheen, we recommend using one of our new finishers, Angelus 4-Coat.
Fire
How did he get rid of the strap from the shoe?
This is awesome
Can y’all make a video of how to draw does type of drawing in the shoes
Question - for the Angelus "Finisher" - do I need to paint finisher on the entire shoe or just the painted areas? Also - should I add Angelus "Duller" to the finisher....I do not want shiny shoes! I added "duller" to the colors I used and it came out nice and matte. Is one thin coat good enough? Thanks SO much!
You only need the finisher on the areas painted. However, if you used duller, do not use finisher. It defeats the purpose since you then cover the paint. We do have a 4-Coat FLAT finish that is FLAT. You can apply that after any Angelus paint color you use and still have that flat look.
🔥🔥nice
Man that is dope! Are they going to be given away, or for sale?
@customicasso would love to do a pair for you. Contact him directly for his rates and pricing. Info in the description.
Really quick question, is the red that's used on the dragon the same as the red that's used on the dragon balls?
Yes, that is the color red the artist prefers to use on that. Same red he used all around for this custom 💪
@@AngelusBrand Thank you!
Hella fye 🔥💢🤘🏼
I’m customizing a pair of air forces and I don’t know if I need a matte or satin finish. Which finish matches the original finish of the shoe?
This always depends on personal preference. Each finisher will give it a specific sheen. For Nike AF1's you can really use any of them you prefer. Matte is the more popular ones for AF1's.
Imagine getting that shoes😇
What kind of tape are you using to mask off the rim of the shoe?
We like to recommend the Premium Masking Tape and the Red Vinyl Tape.
angelusdirect.com/collections/accessories
Thanks for your tutorials :))
Wow bro ! 😮
Well done ! 👏🏼
How long did it took you for all this ?
just a general question. if you but down all the factory finish from the shoe and but at the end just a finish over the paint layer not the whole shoe, isn't bad for the shoe? =)
No the shoe would be fine. However, the area with no finisher may look different from the area with finisher. but thats it.
@@AngelusBrand thank you for your answer
Dope Asf !
How do u paint mesh correctly? When I do it, no color shows and the coating is very light. Even tho I brush hard and use A LOT of paint
When you are working with that Fabric material you can mix our paint with our Angelus 2-soft fabric medium. Mixing the 2 will help the paint adhere on that type of fabric materials and shouldn't dilute the colors. We suggest very light, multiple coats allowing each coat of paint to dry fully. Feel free to send us an email with a photo and we may be able to help. Contact us at Info@angelusshoepolish.com
Great video I'm going to attempt a custom myself do you not add angelus hardener in the paint and why? and how do you stop paint cracking?
All it takes is proper prep and application. When prepping the area, we suggest using our Angelus Deglazer or Acetone to remove the factory paint/finish. This will allow Angelus paint to adhere better to the surface. Also, applying several thin coats of paint rather than one or two thick coats will help a lot more. No additives are needed when painting on leather. 2-Hard is only to be used on plastic or non porous surfaces. Hope this helps!
That's amazing!
Now how do you do the same thing on the other shoe with equal proportions?
Because I have trouble with that
Well, considering he appears to be a really good artist, he more than likely can.
@@mmbrown82 yeah
Would one 1oz bottle of angelus leather paint be enough to cover an entire Air Force 1 shoe?
Yep! A 1oz should cover about 3 pairs of shoes.
Gorgeous shoes. I have seen someone else say that you should always mix it with a fuller to have that professional quality are you using the acrylic matte to achieve that quality?
No, it's really not necessary. Just make sure to shake the matte finisher really, really well before using it. Apply light coats and use a heat gun or hair dryer and this should help give it the matte look you are going for.
Dope!!!!
That is dope
what paint brush did you use for the outlining?
He simply used a standard pencil and mechanical pencil for his outlining. 👌
@@AngelusBrand Thanks! What about for when he was tracing the outline over his pencils? What type of microbrush was he using?
@@AngelusBrand I meant for the thin black outline. What thin black outline is he using like is it a sharpie, a pen? Thanks ;)
@@josephwang2584 That is our #2 round detail brush.
Is it hard removing the Velcro strap?
No, it's actually very easy.
for perfect Dragon, the Dragon must go around the shoe with clear sole and lower them dragon visible, dragon/snake wrap the shoes 😁👍🏼
It’s shenron you zoomer
That’s fire
What did you use for the stencil? and where did you buy it? :) Thanks
Stencils are from vinyl paper which could be found online or most art supply stores like Michaels.
@@AngelusBrand okay, perfect! THX
Yooooooo!!!!!! 🔥🔥🔥🔥
I got my own style of doing shenron but his work is clean tho
Why allways angello? Is the only one?
It's always Angelus because this is our TH-cam channel 😅
@@AngelusBrand aaaaaaa!!
Sick😷🔥🔥🔥
How much would you charge for custom shoes?
Please feel free to contact the artist from this video: instagram.com/mcvsso/
aren't you supposed to use duller??
Duller is optional. It's used top remove the gloss/shine from the paints.
How much are custom shoes like this worth ? Amazing job by the way !
hi, what finisher do you guys recommend on Nike air max’s
We suggest the Matte Finisher. It will provide the least amount of shine and will look most similar to the factory look.
ild du back outline on dballz
What tape did he use
Here's the link to the tape he used.
angelusdirect.com/search?q=tape
Name of Music in the back ground
O SNAP
What type of vinyl is he using
Not sure of the exact brand but it's basic vinyl for a Cricut or Silhouette cutter that can be found at most Art & Crafts Supply Stores.
DOPE!
what kind of tape you use?
Here is the link to the tape that was used. If you have any more questions feel free to contact us at Info@angelusshoepolish.com
angelusdirect.com/search?q=tape
I need those
nice!
It is cool
🔥🔥🔥
can I order some
🔥🔥🔥🔥🔥🔥🔥
name of tape?
Hey there!
He uses our Red Vinyl tape as well as our Premium Masking Tape in the video.
Can you make me one my size 9
Dooooope
I need these in India :( Amazon sells them at freaking $27 per bottle!!
Maybe this will help
angelusshoepolish.com/pages/where-to-buy
Hi there
Angelus Shoe Polish.I love your channel and watch and learnt a lot from it. i am a young aspiring artist who wants to start custom making strictly nike airforces, but the truth is i cannot afford these angelus paints or brushes right now.Down here where i am from in west africa getting a job is one of the hardest tasks a young man or woman can go through., and i have waited enough to get a job. i want to appeal for aid to get some custom work supplies. so i can start something on my own with mny God given talent. i'd very much appreciate it if you can reply back to me sometime. Thanks!
Pano kong magkamali ka kuya?
Did I miss the part where you explained how to get even coverage with no more brush strokes? Oh wait no I didn’t cause that shit was never explained 👍🏼
Swagging
Can I request one piece?
Bro I can barely eyeball doing stick figures
Seems like the very first thing to do in the custom world is take off the laces😂 unlaced then before you wiped it down
🔥🔥🔥 love this, great VID and explained well..#newsub
.......if Kawhi Leonard customized shoes
I just love dragon ball so can I please have them
Bruh no Mamés que pinches huevos tienes
I draw anime characters on my channel ⚡️🤟🏽 mostly dragon ball 🤙🏽
Those color are to expensive for me
The drangon is dope but i feel the dragonball could have been brighter
Estos si están chidos no las putadas de adidas.
Is it just me that thinks this guy ruined those trainers?
First