Full Cost Breakdown LSA SN95! (Chip Cost)
ฝัง
- เผยแพร่เมื่อ 6 มี.ค. 2022
- For more updates don't forget to subscribe and follow me on Instagram
Merch at- cooperbogetti.com/
@Cooper_Bogetti and Facebook at Cooper Bogetti.
Email- Cooper.Bogetti@gmail.com for all inquiries - ยานยนต์และพาหนะ
To be clear the goal wasn't to spend as little as possible building this car. It was to build the car I wanted to build with good parts and not going way overboard. It could have been done cheaper but cheap parts now aren't always the best in the long run
If you did put a value on your time, how much more would it be? say 25-30/hr? I'm not sure how much it would be really lol maybe you're an 80$/hr guy
@CooperBogetti you kno what we need now coop a video with you and Garrett, madi, James, amber and George and Sam all teaching the wives how to run down the track you kno like a got with a giraffe and some friends to teach the wives how to drag race that would be a dope video
Yes you do and my car has been together with zero problems for 2 years straight now running mid to high 9s !
@@skankarmor1 what mechanic could You hire for the ridiculous 'low ball' figure You stated ?!
perhaps a beginner mechanic gets paid that low figure as an employee.
Look at billing charges for time at any local, private or dealer vehicle mechanic and You will have a base level to start from.
Then look at performance shop billing and mechanic wages.
Then look at private performance mechanic billing, charges to a customer for more realistic estimates.
Sincerely
@@skankarmor1 my estimate is 100 hours minimum, and to pay a professional performance shop you're maybe in the 200/hr range. 20k total
$300 here, $500 there adds up quick. Thanks for the breakdown. I think this really helps the younger guys get an idea what they are in for.
Every-time i look at the car it cost me $200+ lol
Love the honesty you put into these videos, keep it up Coop!
Might as well have full disclosure 🤘
Yup, could'a been done cheaper, but no where near this level.
A lot can be said about spending the money on good parts when it comes to building a dependable car. Great job brother!
One of the most frustrating things when I went through my first LS swap was wading through the sea of people claiming they did it for $2,000 or less. It almost always turned out that they "already had" or "got for free" most of the expensive parts and they just conveniently leave that out of the budget.
That was my first thought on this as well. They all seem to leave out the "buddy discount" that everyone else will be paying for, without the shop fee.
Im Definitely guilty of this. I only have about 700 out of my pocket. The rest is trades, freebies, and work for parts
IF you want to shut that down, ask them if they can do it again for the same price. If they say yes, ask them to do it for you for the same price. Suddenly, ope.
@@eriklarson9137 bad argument really. My favors and free stuff doesnt extend to everybody, but all of it is doable for anybody
Wishing you nothing but continued success brother!!!
A real eye opener! Thanks for putting this out for everyone.
Thanks for the breakdown Cooper, I appreciate that you used retail prices as it gives everyone a realistic cost of racing with decent parts, not used/junkyard parts.
I didn't expect it to be this much! Really appreciate you honesty
Excellent Information....and hats off to the sponsors. Great video Coop.
Your doing great man love the content keep up the great work.The build is worth every penny
I'm glad you're being honest about the true cost of this build. I see far too many TH-camrs claiming they've built a 9 second car on a ridiculously low budget. Then you watch their videos and start doing the math in your head. It never adds up, because they don't include the little things, like hoses, belts, connectors, motor mounts, brakes, etc. You're going to have lots of fun in that car for years to come, I look forward to the great content it will provide. Stay safe Coop!
Thanks for sharing the breakdown costs and keep up the great content!
Not surprised by the cost… actually impressed that you’ve done all that work alone.. with a cage and some nice drag wheels the car will look 🔥🔥…. My next dream build has to be a 2JZ like the Camaro
Very detailed breakdown in Chip!!
Great video Cooper, that's so much more then I expected
Your time in it would push this car over 45k. Seeing what shops charge per hour $75 to $100. Never down your time bro. Love the build. And can’t wait to see what’s next for chip
Just hard to put a number on that as I dont have a rate or number of hours. More thinking in a DIY type situation
@@CooperBogetti Pick up the welder. i want to see you getting more detailed into the welding world! you got great machines time to see them used by Cooper not anyone else~!:)
Oof... I would love to only pay 75-100. I just stopped going to a "Vehicle-Letter" shop that's charging $140.
@@mattcash5775 wow 😯
Come to Cali , 185-250 east
Love the break down. Gives a real idea to people who might be wanting to jump into the game
This is not how you “jump” into the game. As you can see. Coop is just a car builder. His experience behind the wheel is almost 0. Any novice driver shouldn’t and also doesn’t deserve to have a quality set up until after you achieve a certain level. To know how to operate a stock car to its limits. I bet cooper is not capable of operating his fleet at a high level. Do you even see him drifting his 50k drift car. He’s only been behind that wheel no more than 30mins. It’s like a spoiled rich kid picking up hobbies. Not good at them and wants the nice fancy set up, but bails on the passion down the road out of boredom
Glad you was straight up with us its very cool
Love the content 👍🏻👍🏻👍🏻👍🏻keep the great content coming . Allot of people just think it costs a couple of bills to build but only if they knew.. great breakdown of costs
Wow. Great video. I love seeing cost break downs. On builds. I don't think avarage people understand the cost of some of these hotrods and car projects. You could double that amount if you accounted for an average labor wage to do all the work you did. And the sense of pride and acomplishment that you gain by building your own running driving racecar. Is priceless. 👍
You ar a master of building "good enough" cars and you are doing it yourself most of the time. And you also winning some races.🏎👍
Cheers Coops, enjoyed the breakdown of the cost of the car.
Hope Mrs Bogetti appreciates the time and effort you put in.
Lol.
Cheers Mate.
Super informative thanks for doing this video brother thats a rad Stang 👊
Wow Cooper that was refreshing, something rarely spoken about in this detail and an eye-opener! put labour on top of that 32k and you would easily double it.
Thanks !! Nice to get some real prices. MCM once did a $165 cheapest ebay turbo onto one of their projects.....when they did a cost analysis it worked out to 16k plus. Am in the process of doing a 11s for 1100 Barra project atm and boy do you have to find some bargains !!!
Damn coop well she clean man and best wishes man on everything you have planned for the future
Wow that's a lot I never would have thought it would cost that much thanks for sharing
I would have guessed 40k plus! Adds up quick huh🤣 ur work has value bro cuz u did it
Like the honesty on the car builds
Great work looking forward to the cage installation vlog
Beauty! When I got my car I though I’d have a 10k turbo build, now I understand all the support and time/money that goes into it, I’d say I’m finally ready for boost $14,000 in and 9 months of work. I think if I do junk yard boost and a bit more mods I’ll be at 20K. 30+ ! is more than enough for these beauty’s and you did it right !
WoW Coop! That’s insane! You should do the body work and paint it! Finish it with wheels and Tires!
Thank you Coop
Exactly what I like to hear. Most car TH-camrs make it seem cheap
Hey Cooper, just a quick suggestion for these type of videos, not sure if anyone has suggested, but i think it would be good to show the list of parts and prices on the screen if possible. That being said, keep up the good work
Get a plasma table with cad example crossfire pro, tube bender and notcher, you'll save ao much money in brackets and front end kits plus be some cool content to see you make and design your own way, keep it up dude love how real you are on the build prices!
Great breakdown. Everyone's LS swap always starts out "budget" until it's not. Haha. Now you really have me thinking hard about whats into mine so far. 😳 Anyone saying they did it for a couple grand is full of it. Just because the parts were sitting around doesnt mean it was free! Keep up the awesome content Cooper. Cheers from the Cornhusker state!
And budget means something different to everyone and every class in racing
@@CooperBogetti agreed 100%.
That was cool I appreciate the breakdown cost
gives me a great idea on what it will cost me to build a drag car. thanks coop!
Finally someone who is honest with what it takes. Some TH-camrs act like money is nothing.
I like to talk about the topics people shy away from
@@CooperBogetti an that's why I watch your channel.
Great content thanks for sharing
Thank you.
A new battery is $180 now 🤯 love this kind of content coop.
A little overestimated but probably like 90-120
Educational and entertaining.. 👍
I really appreciate the honesty In this video. I’m in the middle of doing a Godzilla swap and it gets expensive… Fast
The small stuff adds up
Great breakdown Coop. I figured you only had about $20-23k in this so I was surprised with the grand total for sure. Huge shoutout to the critical sponsors because they absorbed a great portion of the cost. I would be interested to know how many hours was put in as well. Even if you don’t account for the labor in the total it would be great to have an idea on the total number of hours that were invested.
I wish I knew the hours it's a lot
I was thinking the same thing dude. I'm like I just don't see it. And I was thinking if everything is this much how are all these small local racing part companies staying alive because I only make $17 an hour and I can't afford this s*** and there ain't that many people that can just swing that much money. Just to finish the $20,000 vehicles taken 5 years for me. And what sucks all the s*** I bought is all outdated now and the damn car hasn't got to go down the track.
@@chrisboroff3546 That's the same story with many hobbies. When you have to buy it bit by bit, there's something else better already out by the time you are getting finished. Sucks.
@@chrisboroff3546 It doesn't matter that it's outdated as you say. The thing is it will still work and do what you need it to do.
Get some Summit single stage paint and find a booth to paint it in. Make it look like its 30k. But yeah, nickels and dimes add up. My build so far is almost 10k and still have to decide on what body I want to put around it.
Hell yeah.. Bro, you gotta get some merchandise...
It adds up quick. Ive done 2 SN95 swaps. I managed to do 1 pretty cheap but it has a stock 5.3 with a small cam. and I already had the transmission and converter. I only paid 650 for a gt roller and it came with 3.73 gears. I upgraded the axles with the same $750 kit and bought a kmember kit with headers for $1000. Motor was 500 and I had won a free terminator x. Im guessing I have 5-6k in the car and nothing was done to the suspension. That one was my sons 1st race car. I liked it so much I built myself one. I had an 8 K budget and went way over. I had a motor but blew it up pretty quick and wound up getting a rods and piston short block built for 3 K. Im probably in that one 15 K...maybe more. Both cars look worse than chip but are solid drag cars and we've had a blast with them. Ive probably have spent 30k or more on my turbo 4th gen and it doesnt look much better. Ive been spending money racing one thing or the other for 15 years now. I figure if I had dumped all that money into the S&P 500 Id be able to retire early. Its been worth every penny though.
Crazy how that works, and I'm sure you have a list of things you want to change and add. It gets really annoying when you have to buy parts twice because you tried to save on the first one I've done that one a lot
Please do a break down on the comaro the OG one ..and probably be a good idea to keep a list on the new one to make it easier in the future when ita badass
Thanks man hope to see you at the track this season! I was wondering if you had plans set for the Camaro 2jz to win a certain event this year? Good Luck in Texas!
Man even after listening to most of the numbers I didn't expect that number
Cool video-thanks for the breakdown. Is all of this funded strictly by TH-cam video views or other revenue streams?
Chips my fav out of the bunch! It’d be $100k if a shop built it probably. Flipping crazy.
An LS swap does sound pretty awesome though! The 5 L is good for about 500 600 horse then it pretty much guts itself no matter how good you build it. Unless you have a bunch of money to throw away!
Way cooler then cleetus. He makes it feel like I can run 8sec for free lol
Are you into drifting? I really do like your 240. Believe it or not but I use a simulator in house & it's worked for me on Forza Horizon & Forza 5. Now I know there are video games but trust me it's worked out for me, because I'm doing a drift build & I'm shooting for 400hp just to learn at the track.
you have made me feel great about just putting a 351 mine. have about a quarter of the cost and make close to 700 wrhp on 12lb
What 351 engine did you use?
Don’t forget a driveshaft loop, flexplate shield, and transmission shield. Cheaper than lifeflight!
Yes need a few of those
@@CooperBogetti Also a parachute [see Tess Woods (Miss Midnight Maverick), post crash in LV, Nov. 2021 and others about an automated version which connects with Your ECU - also better to have a button on or near Your steering wheel activation than lever to reach up - consider for both the 2JZ and new Camaro Z28 too], fire system, neck brace in the cage. 🤔😏
My view is that having safety equipment and design should be included in any vehicle build or use in any and all racing venues, even if the authorities don't require or require less.
If any factory built vehicle hits a wall at highway speeds or greater, what will occur to the vehicle and more importantly the driver and passengers ? Al The more so, for any vehicle driving above highway speeds of 80-100,-120+ MPH whether for 1/8, 1/4, 1/2 mile drag or roll, time attack, track, road, rally, racing, etc.
Isn't human life the most important; Yours and those You know ? Why not minimize the risks, where and when possible, with what exists and have the BEST available.
The professional racing organizations review their rules, especially with and for safety, often, at least yearly, and post major collisions, and such incidents.
NHRA/IHRA and others should already have improvements in the walls to absorb impact as NASCAR/CUP/Indy,F1/IMSA etc. have done and implemented, improving still for several decades. The drag racing strips are and have far behind constantly.
Also, State, US DOT standards are not sufficient either. They have more, greater restrictions within emissions than safety standards.
All The Best and Much Success in Your Quest, Health and Well Being. 😊
Sincerely ☺
@Cooper Bogetti [and all that desire to know]
This additional section is included to bring clarity, proper information, knowledge, about the extent of Our massive population under Government Authority, lacking with [nearly] every known organization, group, politician, political party, media, and how We as citizens have been inDOCtrinated, directed, dictated, controlled, misled by falsehood, pretense, lies, false, incorrect, distorted, missing, lacking, misleading information, misinformation, disinformation, portrayals, narratives and propaganda. these affect affect aspect of human life, have existed for 162+ years [seemingly back to earlier to the middle 19th Century in the USA and previous in Europe, especially during the shift from Authoritarian Monarchical Government to Authoritarian Socialist Governments , which expanded worldwide and into the USA, also with Authoritarian Communist/ism Governments and with some continuing Authoritarian Monarchical Governments [Iran, UAE, Saudi Arabia, Syria, Jordan, etc.] and some Royalty still existing, many with hidden Authority, direction, dictation, control.
🤓
Their Authoritative Regulations are to force compliance to their standards. Their regulations, as laws, are actually not legal, valid, according to the US Constitution, since the US Congress, Legislation lack that specific authority as detailed an defined in Article I, Section 8,9 [See US Constitution] and thus left o the States, but they must also follow the US Constitution and Amendments, thus many such Regulations are unlawful via them including those which specify Individual Rights [1-9. 14, etc.]. But few have been challenged over the last 122 years since the US Congress has begun passing them, especially more so starting in 1933. Thus nearly all person alive, wer born into a time period and have been living under these illegal, invalid, unlawful, unconstitutional legislation, regulations, enforcement, thus extremely familiar, well established, inDOCtrinated by the Authoritarian Government, political system, media, public 'education'/indoctrination system, etc. By comparison, the Authoritarian Socialist and Communist have massive Government Regulations, Restrictions, Limitations, Enforcement, etc. mostly less than in the USA. The current contrived 'COVID'-'UN/WHO-Pandemic' situation is an excellent example for comparison as are the various Regulations with vehicles which exits worldwide within every country by their Authoritarian Governments.
The only recent challenges to the US Federal and State Mandates, Limitations, Restrictions, Regulations, enforcement, etc. have bee the few plaintiffs during this 'COVID' situation with all having success. These results have been mostly kept hidden from the public, purposely, not conveyed, portrayed, discussed, publicized by any political party, media, organizations, etc. no matter what their portrayed positions [Why ? 🤨]
The Federal District Court Judge for each decided, ruled for the Plaintiffs against their Governor, the Governor's executive orders, mandates, limitations, restrictions, etc.as Unconstitutional, citing the First and Fourteenth Amendments, thus invalidating rendering them null and void. Their reasoning is that the US Constitution does not specifically state thus not allow any Government [via Executive or Legislation] to infringe upon the Individual Rights of citizens within any declared state of emergency, whether 'natural' occurrence, medical, disaster, etc. Thus, no such Authority exists. The Judge's decisions were for KY [July], PA [Sept.], NY & CA [Dec.] 2020. The Plaintiffs of NY & CA were granted immediate relief against their Governors' Mandates, etc. by the US Supreme Court, in a 5-4 decision, in November 2020, deferring the decision to their District Court Judge [pending results if not accordingly - which was favorable the following month]. thus The Supreme Court, in their summary of the those in favor, clearly stated their views about these Executive Orders, etc. and at least on, perhaps two others agreed with them, but not the necessity for immediate relief.🤓
Also, the California State Legislation, which bans assault rifles [sales, etc.], passed in the early 1980's [was living there then, thus remember it well] was challenged in Federal District Court. the Judge decided and ruled in favor of the Plaintiffs against the CA State, as Unconstitutional, thus null and void. That decision and ruling was in 2021.🤓
The most recent is the US Supreme Court Decision for The Plaintiffs against OSHA with their 'COVID-19' 'vaccine' Mandate, Regulations which the US President Biden announced in November 2020, then OSHA announced formally, officially, shortly afterwards. The US Supreme Court decided 6-3 for The Plaintiffs, stating the Congress legislation did not grant, give, state any authority for OSHA to establish any regulations which affect the general public, are not specific to the working environment, workplace or any specific one or group of them. Thus, since OSHA lack this Authority, the previous ruling is 'stayed' and their Mandates, Regulation for such are null and void; dated early February 2022.
[OSHA states on their site, officially, publicly, they retract their Mandates effective February 25, 2022; This is a clear violation of the Supreme Court decision, full of denial, arrogance, haughtiness, [We say 'chutspaw'], and claims of Authority they do NOT have! The decision states that OSHA has NO Authority within their legal charter from Congress, thus their Mandate is null and void. OSHA has no legal authority to make this mandate or retract nor specify any date either. In fact, actually, the Supreme Court decision affects the OSHA Mandate from its inception in November 2021 as invalid, illegal without authority. 😖
All The Best and Much Success in Your Quest, Health and Well Being. 😊
Sincerely ☺
Had a very similar setup in my 73 c10, 5.3 lsa throwint 11psi.
Had built diff
Fti th400
Etc etc
And roughly with cost of the truck itself which was about 7k I had 3x,000 into it also. Tan 11.20s
It adds up quick lol
Its hard not to let it get out of hand
good job
Wow that's a lot more than I was expecting. I thought 15 - 20K
Damn, I did not have a clue it would cost that much. That is crazy.
My Mustang 5.0 gts looks like yours but with Roush side pipes and a beautiful Saleen wing in Deep Forest Green with the Cobra 17 by 9 Wheels! 5.0 supercharged!
32k And that's not including if you race it and do the proper maintenance it's a 45k dollar machine when it's done tho!!! I love how you show it takes money to build and race a car but don't need 100k to do it!!!! Keep up the good work your doing Amazing.... Showing people you can do this without having a crew of people to help!!!!
Cooper videos like this could be a bummer for dudes watching with their better halves 🧐
Thank you. #!!!
Sloppy mechanics on you tube did a video called 8 for 8 he built a 8 second mustang for 8k and then did a break down video on how he did it. I think his goal was to go as fast as possible for the least amount of money. There really good videos and very informative.
you can make it more expensive by replacing the 1900 rotating core with a 2650 core. Harrop suoerchargers make it and in a full weight Chev ss 427ci 4L80 it ran an 8 second 1/4 mile
Maybe after we max out the LSA
It all adds up quick. Best not to know what it costs. Makes it feel worth it if you don’t realise how much it costed 😂
Yep take the total on what you spend in it. Now double it and that is about how you figure what your time is. If not triple
You often “let your foot off the loud peddle” when you sandbag
How did you do the brake setup I heard you mention booster delete how do you go abouts brake system
There goes my dream of building a race car. LOL.
I want to see the edited version of this video that you showed Bronte...lol
EDIT: Never mind, her video just came up on TikTok. Hope the doghouse is big enough.
Dang I didn't realize it was that much, I was guessing more around $20,000, but you gotta pay if you want to play, still a badass ride.
Definitely could have been done cheaper but a lot of this stuff it high end or brand new stuff
@@CooperBogetti I hear ya
I have a mint 90 notch back with a turbo coyote swap and I only have 24 in it
Holy Poop! My $5k guess was not even close.
Dang I think that’s what I have into my V2 counting the cost of the car with bolt ons(pre covid prices) and it now has a built engine max effort on stock ported blower, but this is def cool
🤨
@@mikescherrer4923 ?
AS the old saying goes, “Speed costs, how fast do you want to go?” Building a reliable race car for $2000 is a pipe dream, but buying all the best parts from the best sources will get you a $32,000 old Mustang. It can definitely be done cheaper with time and used parts but if this is what you wanted then good on ya. A little pricey for my tastes for this level of car but as long as you are having fun racing it.
What accessory drive setup are you using?
I have the same year car as yours. how did you hookup the harness into the car. I have a standalone harness and no one is of any help on which wires I need to hookup to!
I really need help with this and it would be really appreciated.
Thank you!
B
My philosophy is build it right build it once ✅
Thank You, your cost break down may help some one from getting in over there head
I hope so, if nothing else be a template for people
Speed costs, how fast can you afford to go. If you have collected parts forever and got them cheap good for you but doesn't happen for most people. Plus you need to know what are the best parts and what they're worth, then you can play the game and wait for the deals but how much time do you have.
So easy to do . I stopped adding what I spend on cars just for that reason. Lol
Brontes tik tok reaction was priceless
Do one of the Camaro
Oh damn, i would have guessed 15-20k tops. I guess every tiny bit adds up.
Bronti must REALLY love you allowing you to spend that money
Allowing? 😂
What did you use for headers
Now imagine if Cooper did the breakdown on the 2jz camaro?
LS guys thinking 30k for a 9 second car is crazy. You guys have no idea how good you got it lol
Hey how popular are the LS 5.7's in the USA ? Are the 5.3's popular cause their Iron blocks ? Loving ya work from the Land down under.
We got a lot of 5.3s in the us the 5.7 is a little weaker also
Cooper are you going to weld in the reinforced Torque Boxes?
After i rip the stock ones out yes
Genuine
They're way prettier in person than in pictures I would know I have one
I had to get earbuds, my wife was listening 👂 😂
Yeah it's $500 for the software so you might as well say that that Holly was two grand a little bit more after tax