Vespa PX gearbox installation Vespa PX/P/PE largeframe gears, Vespa PX gearbox

*ACTIVATE SUBTITLE*
Instructions Vespa PX Gearbox rebuild / Installation
In this Vespa tutorial video we show you how to assemble and disassemble a Vespa transmission.
Of course we use a HiQuality Vespa transmission from bgm like gearwheels, shifting cross, spacer etc.
Christmas tree? That's the name of the ready mounted gears on the main shaft - looks like a christmas tree. And if you install a new, perfectly adjusted gearbox into your Vespa, it will be like christmas for the scooter, if it is from bgm, for sure :-)
Used articles in this VIDEO:
------------------------------------------------------------
Products:
Gearbox shim -BGM ORIGINAL
Part no.: BGM6020s10
www.scooter-center.com/en/pro...
Circlip PIAGGIO Ø=48mm x 1,5mm - used for driveshaft
Ref.: 1009101
www.scooter-center.com/en/pro...
Drive shaft
Ref.: 4940008
www.scooter-center.com/en/pro...
Cruciform
Ref.: BGM6501L
www.scooter-center.com/en/pro...
Gear selector rod
Ref.: BGM6502L
www.scooter-center.com/en/pro...
Threadlock -LOXEAL 83-55
Ref.: 7676902
www.scooter-center.com/en/pro...
1st gear cog -BGM PRO - 57 teeth
Ref.: BGM6557L
www.scooter-center.com/en/pro...
2nd gear cog -BGM PRO 42 teeth
Ref.: BGM6542
www.scooter-center.com/en/pro...
3rd gear cog -BGM PRO, type EFL 38 teeth
Ref.: BGM6538L
www.scooter-center.com/en/pro...
4th speed gear cog BGM PRO, type EFL Vespa PX125-150 (1984-), T5 125cc, Cosa125-150, LML Star/Stella125/150 2-stroke - short 4th gear for PX200 (1984-), Cosa200 - 36 teeth
Ref.: BGM6536L
www.scooter-center.com/en/pro...
Feeler gauge BGM original
Part No.: 1800013
www.scooter-center.com/en/pro...
Gearbox shim -BGM ORIGINAL
Part no.: BGM6020S11
www.scooter-center.com/en/pro...
Join us in the project Platónika and follow here our story:
blog.scooter-center.com/categ...
Music by: Rene Winkler von SC / NXT Level
Title: fonzee-inc-one-day

[@vesparidergarage]

greate tutorial THX

[@scootercentercom]

Thank you 👍

[@blechgefaehrten]

Nice video with perfect camera positions. We also did an engine build up for the PX...

[@scootercentercom]

👍👌

[@ClassicVespaWorkshop]

Nice ;-)

[@nvdb-77]

Say you have an old set of gears, what would be the max tolerance that you are able to shim on Vespa P axle, and PX axle?
I know the max play (when shimmed), should be between 0,15 and 0,4.
But what would be the maximum thickness/mm shims you can use on P/PX, before you have to conclude 1 or more of the gears is too much worn.

[@adamos9296]

Perfect

[@scootercentercom]

Thank you!

[@adamos9296]

@@scootercentercom just check on email. I have a question

[@exsoulagent]

Simples eh Sergey 😉

[@JuriWissekerke]

Hello there i want to ask you whats the best clearance for the geabox P200E??