Project Delta Ranger - Episode 2 - Eibach coilovers and rear shocks.
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Needed suspension upgrades on the 2021 Ford Ranger Oz Tuning truck. Starting out with the Eibach Pro-Truck coilovers (part E86-35-048-01-20) and Eibach rear shocks (part E60-35-048-01-01). We will be switching over to Bilstein's soon and giving honest reviews on both setups.
All installed at the same time were Readylift anti-intrusion bars (part 67-2900).
These parts and more can be found on our website:
oztuning.com/p...
oztuning.com/p...
oztuning.com/p...
#Oztuned
#OzTuning
#OmegaTune
#Eibach
#FordRanger
#Ranger
#KenOsborne
Interested to see where this ended up :)
Is this project still in your fleet?? Would love an update!!
More videos on the ranger coming?
My tremor is perfect I don’t have those issues
33s??
Hows the mpg and torque with those tires?? That's a big jump for a little truck.
We didn't get to see the rears done. My fx4 rear shocks don't look like yours mine didn't have a label .. ie. They look like generic off brand junk!
Thanks for the review. Any update offroading?
How was the alignment after the shock installation? In addition, the crash bars were removed? Did you trim the off or you go trough the hard way and remove them without chop it off?
Not too bad, but had some positive camber and took it in for an alignment.
The crash bars were removed by loosening the front bumper to get the fronts out. The rears came out by removing the the plastic trim. And then there is a support block for the liner that needs to be removed. That's the route we went so we wouldn't have to cut anything.
I have a Ranger xlt 4x4 2021 and im undecided. I'm torn between fox 2.0 and the eibach 2.0. I want to go with a 3inch lift, so would I have to upgrade UCA's 🤔? Did you upgrade your UCA's since you did a 3inch lift? Great video by the way !!
ShockSurplus has a video where they compare those 2.
Why will these not work on 2wd??
That we do not exactly know (you would need to get with Eibach), but could be because they are too stiff without the extra weight in the front of the 4wd components. They do sell just the springs for the 2wd's that say a 3" increase, and the part number is E30-35-048-02-20.
The weak spot is that it’s a Ford.
Durp...