Michael thank you for the video it's actually what I was looking for , I know this video is 2 yrs old but still helping people . Yeah doing my brother's Astro van and that's where I put it but I'm using a I.V. Drip bottle to do it ✌🍺🍺
I found your video looking up Astro Van stuff on Reddit and I’m so glad I did. I love my Astro (2005) and these videos from normal not over the top people are super helpful!
thank you for your videos. they helped me a lot with my astro. also those are really good little skit Diddy you did with the admitting you're wrong hump. you pulled that off really well. I was surprised
So the issue that I'm having with mine is it doesn't seem to be getting gas all the way to the intake manifold. Like I have feel pressure I can spray gas down the intake and keep it running and even when I have it running like that I could test the gas line and it sprays out gas so I know it's got gas but it's not like going all the way up to the head it's weird. I am going to attempt to try your method maybe it might help it and I'm going to go rent a fuel pump diagnostic kit thing of I guess I got to look up a video on how to even use that thing but this thing is pissing me off. Only taking off the throttle body and cleaned it I've changed the idle air control thing and the throttle position sensor and the fuel filter the pumps works I can hear it and I know it's pressurizing the gas lines but I don't know. For as electronic components goes that's about the extent of my understanding so far so I don't know what other kind of component might be able to per se affect that but I think I might have to get a new spider injectors
I'am Your Newest Subscriber Great Videos I have a 1999 Astro Van It Is Pouring Oil Out Gotta Fix It Hopefully Tomorrow. i think it is the oil filter housing their are 2 seals in their
Small world! I remember you from the Naud St days of the Cretins Clubhouse. I also have an Astro. 2004, 2wd.. wish I'd have held out for AWD.. but I got a good deal, and my old truck was on its last legs. FWIW- I used to have a shit-box Miata. Did a similar top end cleaning.. Used the Seafoam kit, and also water. Worked great, but all the gunk went straight to the CAT, and I had to replace it. That said, I probably overdid it. Smoked out the neighborhood. Neighbors were PISSED. On the upside: after that, and a basic tune-up/timing belt.. it ran like a top. Just had to replace the radiator on my Astro. I need to replace some vacuum lines, and the steering hydroboost just started leaking. Blue devil has that holding for now. As soon as I get a free weekend, knocking that out, along with a tune-up.
You are a funny man Michael! Good info, looking forward to seeing if there is a mechanic out there that agrees / disagrees with you. What you say makes sense. My van has a bit of rough idle right now. Going to replace the plugs soon and see if that changes the picture. The plugs and plug wires were replaced by the previous owner 26,000 miles ago. I would like to pull the plugs just to see what they look like. By the way, Chevy wants $220 for new stock spark plug wires - pretty steep. Keeping the old ones in for now. I would prefer the AC Delco but going a step at a time.
Appreciate your transparency! Wasn't there another way you could do it that you were going to show? & any idea how to properly reset the newly installed MAF??
@@AstroVanTribe Yeah I'm sure, it was throwing like 3 codes & after I got the MAF in all codes are gone now. No, up until I heard about the reset I wasn't aware that would even be necessary but it's in the plans. Probably not even a big deal. Thing just needs some good cleaning/tune up being a 97 & ideally these rpms will go down & mpg go up after I get it done 👍
You are like me Michael. Why not try? All you can do is cry? But just one thing. Good you´re outside. All those carb/intake cleaners are toxic as f***.
@@AstroVanTribe I'm going to give the sea foam a shot on the astro. When I got it had code for maf. Changed air filter. Still code. Changed maf. Code went away but still stubles at highway speed uphill. Tried all I can think of. Cat not clogged , distributor good. Changed plugs n wires cap rotor and distributor itself. Seems more like spark issues , its random multiple when it stumbles. I'm hesitant to change the coil. Anyway that's the gen x life. Take care my friend.
@@AstroVanTribe was thinking that too. I read about it. I cleaned and inspected crank sensor. It was covered in muck. I was going to scope trace it before replacing it. Thanks for the advice. Could just be relearn after distributor change.
Wanted to report back and send a quick thanks. Even without the relearn, The Magic Bus is running great after the crank sensor change. I tested the old sensor with a 12 volt supply, and it was failing intermittently. I could get 12 volts out without metal in front of the sensor face. Or get it to go 0 to 12 to 0 outpuut by gently tapping on it. Definitely no good. I bought a new plug too but didn't need it. Thanks again , you definitely got a new subscriber.
Michael thank you for the video it's actually what I was looking for , I know this video is 2 yrs old but still helping people . Yeah doing my brother's Astro van and that's where I put it but I'm using a I.V. Drip bottle to do it ✌🍺🍺
I found your video looking up Astro Van stuff on Reddit and I’m so glad I did. I love my Astro (2005) and these videos from normal not over the top people are super helpful!
thank you for your videos. they helped me a lot with my astro. also those are really good little skit Diddy you did with the admitting you're wrong hump. you pulled that off really well. I was surprised
So the issue that I'm having with mine is it doesn't seem to be getting gas all the way to the intake manifold. Like I have feel pressure I can spray gas down the intake and keep it running and even when I have it running like that I could test the gas line and it sprays out gas so I know it's got gas but it's not like going all the way up to the head it's weird. I am going to attempt to try your method maybe it might help it and I'm going to go rent a fuel pump diagnostic kit thing of I guess I got to look up a video on how to even use that thing but this thing is pissing me off. Only taking off the throttle body and cleaned it I've changed the idle air control thing and the throttle position sensor and the fuel filter the pumps works I can hear it and I know it's pressurizing the gas lines but I don't know. For as electronic components goes that's about the extent of my understanding so far so I don't know what other kind of component might be able to per se affect that but I think I might have to get a new spider injectors
I'am Your Newest Subscriber Great Videos I have a 1999 Astro Van It Is Pouring Oil Out Gotta Fix It Hopefully Tomorrow. i think it is the oil filter housing their are 2 seals in their
Small world! I remember you from the Naud St days of the Cretins Clubhouse. I also have an Astro. 2004, 2wd.. wish I'd have held out for AWD.. but I got a good deal, and my old truck was on its last legs. FWIW- I used to have a shit-box Miata. Did a similar top end cleaning.. Used the Seafoam kit, and also water. Worked great, but all the gunk went straight to the CAT, and I had to replace it. That said, I probably overdid it. Smoked out the neighborhood. Neighbors were PISSED. On the upside: after that, and a basic tune-up/timing belt.. it ran like a top. Just had to replace the radiator on my Astro. I need to replace some vacuum lines, and the steering hydroboost just started leaking. Blue devil has that holding for now. As soon as I get a free weekend, knocking that out, along with a tune-up.
Sure, I remember you, hope you're good....!
You are a funny man Michael! Good info, looking forward to seeing if there is a mechanic out there that agrees / disagrees with you. What you say makes sense. My van has a bit of rough idle right now. Going to replace the plugs soon and see if that changes the picture. The plugs and plug wires were replaced by the previous owner 26,000 miles ago. I would like to pull the plugs just to see what they look like. By the way, Chevy wants $220 for new stock spark plug wires - pretty steep. Keeping the old ones in for now. I would prefer the AC Delco but going a step at a time.
You can get a lot of the ACDelco part from Rockauto.com - Best prices around....
@@AstroVanTribe Thank you!!
I use shell 93 octane, it really works!!!
Works at doing what? 😁
Appreciate your transparency! Wasn't there another way you could do it that you were going to show? & any idea how to properly reset the newly installed MAF??
"reset"? Your computer should just figure it out
@@AstroVanTribe Well that's what I figured too, the code goes off it's good but idk I've been hearing different stuff so.. ???
@@Dan0rioN did you try disconnecting the battery for a while? Are you sure you needed a new MAF sensor?
@@AstroVanTribe Yeah I'm sure, it was throwing like 3 codes & after I got the MAF in all codes are gone now.
No, up until I heard about the reset I wasn't aware that would even be necessary but it's in the plans. Probably not even a big deal.
Thing just needs some good cleaning/tune up being a 97 & ideally these rpms will go down & mpg go up after I get it done 👍
@@Dan0rioN Good luck, be diligent and stick with it, in the end you end up with a kick-ass van
Great video.
Heck mine won't even run with the mass airflow sensor connected
that's a bummer....
Nice bud
Youbcan just remove the throttle body plate you will get more power try it
Its ok dude thats why there is ras on penceils.
Does anyone know the torque specification for the EGR valve bolts? Thanks.
Hmm... tight is right I would guess - The third gen Astro's don't have the EGR
@@AstroVanTribe Thank you !
Lots of veterans don't have money to buy cars.
You are like me Michael. Why not try? All you can do is cry?
But just one thing. Good you´re outside. All those carb/intake cleaners are toxic as f***.
Nice fonzy wrong....
I'm glad someone got that :D
@@AstroVanTribe I'm going to give the sea foam a shot on the astro. When I got it had code for maf. Changed air filter. Still code. Changed maf. Code went away but still stubles at highway speed uphill. Tried all I can think of. Cat not clogged , distributor good. Changed plugs n wires cap rotor and distributor itself. Seems more like spark issues , its random multiple when it stumbles. I'm hesitant to change the coil. Anyway that's the gen x life. Take care my friend.
@@jayclark5912 try the crank sensor and have a shop do a computer relearn - it worked for me
@@AstroVanTribe was thinking that too. I read about it. I cleaned and inspected crank sensor. It was covered in muck. I was going to scope trace it before replacing it. Thanks for the advice. Could just be relearn after distributor change.
Wanted to report back and send a quick thanks. Even without the relearn, The Magic Bus is running great after the crank sensor change. I tested the old sensor with a 12 volt supply, and it was failing intermittently. I could get 12 volts out without metal in front of the sensor face. Or get it to go 0 to 12 to 0 outpuut by gently tapping on it. Definitely no good. I bought a new plug too but didn't need it. Thanks again , you definitely got a new subscriber.